Near-Infrared Phototheranostic Iron Pyrite Nanocrystals Simultaneously Induce Dual Cell Death Pathways via Enhanced Fenton Reactions in Triple-Negative Breast Cancer.

Triple-negative breast cancer (TNBC) is considered more aggressive with a poorer prognosis than other breast cancer subtypes. Through systemic bioinformatic analyses, we established the ferroptosis potential index (FPI) based on the expression profile of ferroptosis regulatory genes and found that TNBC has a higher FPI than non-TNBC in human BC cell lines and tumor tissues. To exploit this finding for potential patient stratification, we developed biologically amenable phototheranostic iron pyrite FeS2 nanocrystals (NCs) that efficiently harness near-infrared (NIR) light, as in photovoltaics, for multispectral optoacoustic tomography (MSOT) and photothermal ablation with a high photothermal conversion efficiency (PCE) of 63.1%. Upon NIR irradiation that thermodynamically enhances Fenton reactions, dual death pathways of apoptosis and ferroptosis are simultaneously triggered in TNBC cells, comprehensively limiting primary and metastatic TNBC by regulating p53, FoxO, and HIF-1 signaling pathways and attenuating a series of metabolic processes, including glutathione and amino acids. As a unitary phototheranostic agent with a safe toxicological profile, the nanocrystal represents an effective way to circumvent the lack of therapeutic targets and the propensity of multisite metastatic progression in TNBC in a streamlined workflow of cancer management with an integrated image-guided intervention.

Multifaceted Sulfone-Carbazole-Based D-A-D Materials: A Blue Fluorescent Emitter as a Host for Phosphorescent OLEDs and Triplet-Triplet Annihilation Up-Conversion Electroluminescence.

Electroluminescence (EL) from the singlet-excited (S1) state is the ideal choice for stable, high-performing deep-blue organic light-emitting diodes (OLEDs) owing to the advantages of an adequately short radiative lifetime, improved device durability, and low cost, which are the most important criteria for their commercialization. Herein, we present the design and synthesis of three donor-acceptor-donor (D-A-D)-configured deep-blue fluorescent materials (denoted as TC-1, TC-2, and TC-3) composed of a thioxanthone or diphenyl sulfonyl acceptor and phenyl carbazolyl donor. These systems exhibit strong deep-blue photoluminescence (422-432 nm) in solutions and redshifted emission (472-486 nm) in thin films. The solid-state photoluminescence quantum yield (PLQY) was estimated to be 78 and 94% for TC-2 and TC-3, respectively. TC-2 and TC-3 possess good molecular packing and large molecular cross-sectional areas, which not only improves the PLQY but enhances the triplet-triplet annihilation up-conversion (TTAUC) efficiency of fluorescent emitters. Furthermore, both compounds were applied as an acceptor for confirming their TTAUC property using bis(2-methyldibenzo[f,h]quinoxaline)(acetylacetonate)iridium(III) (Ir(MDQ)2acac) as the sensitizer. Non-doped OLEDs based on TC-2 and TC-3 exhibit blue EL in the 461-476 nm range. In particular, TC-3 exhibits a maximum external quantum efficiency (EQEmax) of 5.1%, and its EL maximum is 476 nm. In addition, the three emitters were employed as hosts in red OLEDs using bis(1-phenylisoquinoline)(acetylacetonate)iridium(III) (Ir(piq)2acac) as the phosphorescent dopant. The red phosphorescent OLEDs based on TC-1, TC-2, and TC-3 achieve excellent EQEmax values of 21.6, 22.9, and 21.9%, respectively, and peak luminance efficiencies of 12.0, 14.0, and 12.3 cd A-1. These results highlight these fluorophores' versatility and promising prospects in practical OLED applications.

Studies of high-membered two-dimensional Ruddlesden-Popper Cs7Pb6I19 perovskite nanosheets via kinetically controlled reactions.

Two-dimensional (2D) all-inorganic Ruddlesden-Popper (RP) perovskite Cs7Pb6I19 nanosheets (NSs) were successfully developed for the first time by employing a structural recrystallization process with additional passivation of small organic sulfide molecules. The structure of Cs7Pb6I19 NSs is confirmed by powder X-ray diffraction measurements, atomically-resolved STEM measurements and atomic force microscopy (AFM) studies. Cs7Pb6I19 NSs with a specific n value of 6 exhibits unique absorption and emission spectra with intense excitons at 560 nm due to quantum confinement effects in 2D perovskite slabs. The formation mechanisms of 2D Cs7Pb6I19 NSs and 3D γ-CsPbI3 phases were investigated by in situ photoluminescence (PL) spectroscopy and the activation energies of their formation reactions were calculated to be 151 kJ mol-1 and 95.3 kJ mol-1, respectively. The phase stability of 2D Cs7Pb6I19 NSs can be maintained at temperatures below 14 °C for more than 4 weeks. The overall results indicate that 2D Cs7Pb6I19 NSs demonstrate unique optical properties and structural stability compared with other 3D perovskite materials. We have opened a new path to the future discovery of 2D perovskite structures with metastable phases by using this recrystallization method and the assistance of sulfur-derived organic molecules.

Accelerated Formation of 2D Ruddlesden-Popper Perovskite Thin Films by Lewis Bases for High Efficiency Solar Cell Applications.

Various types of 2D organic-inorganic perovskite solar cells have been developed and investigated due to better electron transport behavior and environmental stability. Controlling the formation of phases in the 2D perovskite films has been considered to play an important role in influencing the stability of perovskite materials and their performance in optoelectronic applications. In this work, Lewis base urea was used as an effective additive for the formation of 2D Ruddlesden-Popper (RP) perovskite (BA)2(MA)n-1PbnI3n+1 thin film with mixed phases (n = 2~4). The detailed structural morphology of the 2D perovskite thin film was investigated by in situ X-ray diffraction (XRD), grazing-incidence small-angle X-ray scattering (GISAXS) and photoluminescence mapping. The results indicated that the urea additive could facilitate the formation of 2D RP perovskite thin film with larger grain size and high crystallinity. The 2D RP perovskite thin films for solar cells exhibited a power conversion efficiency (PCE) of 7.9% under AM 1.5G illumination at 100 mW/cm2.

Stabilized High-Membered and Phase-Pure 2D All Inorganic Ruddlesden-Popper Halide Perovskites Nanocrystals as Photocatalysts for the CO2 Reduction Reaction.

In contrast to the 2D organic-inorganic hybrid Ruddlesden-Popper halide perovskites (RPP), a new class of 2D all inorganic RPP (IRPP) has been recently proposed by substituting the organic spacers with an optimal inorganic alternative of cesium cations (Cs+ ). Nevertheless, the synthesis of high-membered 2D IRPPs (n > 1) has been a very challenging task because the Cs+ need to act as both spacers and A-site cations simultaneously. This work presents the successful synthesis of stable phase-pure high-membered 2D IRPPs of Csn+1 Pbn Br3n+1 nanosheets (NSs) with n = 3 and 4 by employing the strategy of using additional strong binding bidentate ligands. The structures of the 2D IRPPs (n = 3 and 4) NSs are confirmed by powder X-ray diffraction and high-resolution aberration-corrected scanning transmission electron microscope measurements. These 2D IRPPs NSs exhibit a strong quantum confinement effect with tunable absorption and emission in the visible light range by varying their n values, attributed to their inherent 2D quantum-well structure. The superior structural and optical stability of the phase-pure high-membered 2D IRPPs make them a promising candidate as photocatalysts in CO2 reduction reactions with outstanding photocatalytic performance and long-term stability.

Facile Fabrication of Highly Stable and Wavelength-Tunable Tin Based Perovskite Materials with Enhanced Quantum Yield via the Cation Transformation Reaction.

Metal halide perovskites have attracted great attention for their superior light energy conversion applications. Herein, we demonstrated a facile synthesis of zero-dimensional Sn2+ perovskite Cs4-xMxSnBr6(M = K+ and Rb+) material through the cation transformation reaction at room temperature. Cs4SnBr6 NCs was mixed with pure metal bromide salts (KBr and RbBr) via the mechanochemical process to successfully synthesize Cs4-xMxSnBr6 perovskite where transformation of Cs to mixed Cs/Rb and mixed Cs/K was achieved. By substituting different cations, the bright fluorescence of the Cs4-xMxSnBr6 was tuned from dim green to greenish-cyan while achieving the photoluminescence (PL) quantum yield of ∼39%. The crystal structure of Sn based perovskite with the substitution of K+ or Rb+ cations was determined by X-ray diffraction (XRD). Moreover, the Cs4-xMxSnBr6 demonstrated superior air stability and exhibited a better photocatalytic activity for CO2 reduction reaction (CO2RR) with high selectivity of CH4 gas with a higher yield rate compared to the pristine Cs4SnBr6 NCs.

Electrocatalytic Reduction of NO3- to Ultrapure Ammonia on {200} Facet Dominant Cu Nanodendrites with High Conversion Faradaic Efficiency.

Nitrate (NO3-) reduction reaction (NtRR) is considered as a green alternative method for the conventional method of NH3 synthesis (Haber-Bosch process), which is known as a high energy consuming and large CO2 emitting process. Herein, the copper nanodendrites (Cu NDs) grown along with the {200} facet as an efficient NtRR catalyst have been successfully fabricated and investigated. It exhibited high Faradaic efficiency of 97% at low potential (-0.3 V vs RHE). Furthermore, the 15NO3- isotope labeling method was utilized to confirm the formation of NH3. Both experimental and theoretical studies showed that NtRR on the Cu metal nanostructure is a facet dependent process. Dissociation of NO bonding is supposed to be the rate-determining step as NtRR is a spontaneously reductive and protonation process for all the different facets of Cu. Density functional theory (DFT) calculations revealed that Cu{200} and Cu{220} offer lower activation energy for dissociation of NO compared to that of Cu{111}.

Strong Excitonic Magneto-Optic Effects in Two-Dimensional Organic-Inorganic Hybrid Perovskites.

This work demonstrates the strong excitonic magneto-optic (MO) effects of magnetic circular dichroism (MCD) and Faraday rotation (FR) in nonmagnetic two-dimensional (2D) organic-inorganic hybrid Ruddlesden-Popper perovskites (RPPs) at room temperature. Due to their strong and sharp excitonic absorption as a result of unique quantum well structures of 2D RPPs, sizeable linear excitonic MO effects of MCD and FR can be observed at room temperature under a low magnetic field (<1 T) compared with their three-dimensional counterpart. In addition, since the band gaps of 2D organic-inorganic hybrid perovskites can be manipulated either by changing the number n of inorganic octahedral slabs per unit cell or through halide engineering, linear excitonic MO effects of 2D-RPPs can be observed through the broadband spectral ranges of visible light. Our result may pave the way for the promising research field of MO and magneto-optoelectronic applications based on 2D organic-inorganic hybrid perovskites with facile solution processes.

High UV-Vis-NIR Light-Induced Antibacterial Activity by Heterostructured TiO2-FeS2 Nanocomposites.

PURPOSE: Antibiotic resistance issues associated with microbial pathogenesis are considered to be one of the most serious current threats to health. Fortunately, TiO2, a photoactive semiconductor, was proven to have antibacterial activity and is being widely utilized. However, its use is limited to the short range of absorption wavelength. METHODS: In this work, heterostructured TiO2-FeS2 nanocomposites (NCs) were successfully prepared by a facile solution approach to enhance light-induced antibacterial activity over a broader absorption range. RESULTS: In TiO2-FeS2 NCs, FeS2 NPs, as light harvesters, can effectively increase light absorption from the visible (Vis) to near-infrared (NIR). Results of light-induced antibacterial activities indicated that TiO2-FeS2 NCs had better antibacterial activity than that of only TiO2 nanoparticles (NPs) or only FeS2 NPs. Reactive oxygen species (ROS) measurements also showed that TiO2-FeS2 NCs produced the highest relative ROS levels. Unlike TiO2 NPs, TiO2-FeS2 NCs, under light irradiation with a 515-nm filter, could absorb light wavelengths longer than 515 nm to generate ROS. In the mechanistic study, we found that TiO2 NPs in TiO2-FeS2 NCs could absorb ultraviolet (UV) light to generate photoinduced electrons and holes for ROS generation, including ⋅O2 - and ⋅OH; FeS2 NPs efficiently harvested Vis to NIR light to generate photoinduced electrons, which then were transferred to TiO2 NPs to facilitate ROS generation. CONCLUSION: TiO2-FeS2 NCs with superior light-induced antibacterial activity could be a promising antibacterial agent against bacterial infections.

Challenges and prospects of polyatomic ions' intercalation in the graphite layer for energy storage applications.

Global population explosion has led to the rapid revolution of science and technology, and the high energy demand has necessitated new and efficient energy conversion and storage systems. Lithium ion batteries (LIBs) have a high potential window, high capacity, and high stability, but suffer from high cost and low safety. Therefore, many alternative batteries, including sodium ion batteries (NIBs), potassium (KIBs), aluminum (AIBs), and dual ion batteries (DIBs), have been introduced. One of the key working principles of these batteries is based on cation or anion intercalation in the graphite layers, and leads to the formation of graphite intercalation compounds (GICs). Recently, studies based on determining a reaction mechanism to improve the performance of the batteries have been conducted. In this review, an overview of the work on the reaction mechanism of polyatomic ions intercalated into GICs, the structure of intercalated polyatomic ions, the structure of the accommodated GICs, and their staging is provided. In other words, this review focuses on unraveling and understanding the reaction mechanisms for the intercalation of polyatomic ions into GICs by in situ and ex situ techniques, correlated with computational studies. The current limitations and future prospects of polyatomic ions intercalation batteries are also discussed.

Exploration and Investigation of Periodic Elements for Electrocatalytic Nitrogen Reduction.

High demand for green ecosystems has urged the human community to reconsider and revamp the traditional way of synthesis of several compounds. Ammonia (NH3 ) is one such compound whose applications have been extended from fertilizers to explosives and is still being synthesized using the high energy inhaling Haber-Bosch process. Carbon free electrocatalytic nitrogen reduction reaction (NRR) is considered as a potential replacement for the Haber-Bosch method. However, it has few limitations such as low N2 adsorption, selectivity (competitive HER reactions), low yield rate etc. Since it is at the early stage, tremendous efforts have been devoted in understanding the reaction mechanism and screening of the electrocatalysts and electrolytes. In this review, the electrocatalysts are classified based on the periodic table with heat maps of Faraday efficiency and yield rate of NH3 in NRR and their electrocatalytic properties toward NRR are discussed. Also, the activity of each element is discussed and short tables and concise graphs are provided to enable the researchers to understand recent progress on each element. At the end, a perspective is provided on countering the current challenges in NRR. This review may act as handbook for basic NRR understandings, recent progress in NRR, and the design and development of advanced electrocatalysts and systems.

A Quinone-Based Electrode for High-Performance Rechargeable Aluminum-Ion Batteries with a Low-Cost AlCl3/Urea Ionic Liquid Electrolyte.

Intensive energy demand urges state-of-the-art rechargeable batteries. Rechargeable aluminum-ion batteries (AIBs) are promising candidates with suitable cathode materials. Owing to high abundance of carbon, hydrogen, and oxygen and rich chemistry of organics (structural diversity and flexibility), small organic molecules are good choices as the electrode materials for AIB. Herein, a series of small-molecule quinone derivatives (SMQD) as cathode materials for AIB were investigated. Nonetheless, dissolution of small organic molecules into liquid electrolytes remains a fundamental challenge. To nullify the dissolution problem effectively, 1,4-benzoquinone was integrated with four bulky phthalimide groups to form 2,3,5,6-tetraphthalimido-1,4-benzoquinone (TPB) as the cathode materials and assembled to be the AI/TPB cell. As a result, the Al/TPB cell delivered capacity as high as 175 mA h/g over 250 cycles in the urea electrolyte system. Theoretical studies have also been carried out to reveal and understand the storage mechanism of the TPB electrode.

Light-Activated Heterostructured Nanomaterials for Antibacterial Applications.

An outbreak of a bacterial contagion is a critical threat for human health worldwide. Recently, light-activated heterostructured nanomaterials (LAHNs) have shown potential as antibacterial agents, owing to their unique structural and optical properties. Many investigations have revealed that heterostructured nanomaterials are potential antibacterial agents under light irradiation. In this review, we summarize recent developments of light-activated antibacterial agents using heterostructured nanomaterials and specifically categorized those agents based on their various light harvesters. The detailed antibacterial mechanisms are also addressed. With the achievements of LAHNs as antibacterial agents, we further discuss the challenges and opportunities for their future clinical applications.

Real-Time Observation of Anion Reaction in High Performance Al Ion Batteries.

Recently, aluminum ion batteries (AIBs) have attracted great attention across the globe by virtue of their massive gravimetric and volumetric capacities in addition to their high abundance. Though carbon derivatives are excellent cathodes for AIBs, there is much room for further development. In this study, flexuous graphite (FG) was synthesized by a simple thermal shock treatment, and for the first time, an Al/FG battery was applied as a cathode for AIBs to reveal the real-time intercalation of AlCl4- into FG with high flexibility by using in-situ scanning electron microscope (SEM) measurements exclusively. Similarly, in-situ X-ray diffraction (XRD) and in-situ Raman techniques have been used to understand the anomalous electrochemical behavior of FG. It was found that FG adopts a unique integrated intercalation-adsorption mechanism where it follows an intercalation mechanism potential above 1.5 V and an adsorption mechanism potential below 1.5 V. This unique integrated intercalation-adsorption mechanism allows FG to exhibit superior properties, like high capacity (≥140 mAh/g), remarkable long-term stability (over 8000 cycles), excellent rate retention (93 mAh/g at 7.5 A/g), and extremely rapid charging and slow discharging.

Photoactive Earth-Abundant Iron Pyrite Catalysts for Electrocatalytic Nitrogen Reduction Reaction.

The generation of ammonia, hydrogen production, and nitrogen purification are considered as energy intensive processes accompanied with large amounts of CO2 emission. An electrochemical method assisted by photoenergy is widely utilized for the chemical energy conversion. In this work, earth-abundant iron pyrite (FeS2 ) nanocrystals grown on carbon fiber paper (FeS2 /CFP) are found to be an electrochemical and photoactive catalyst for nitrogen reduction reaction under ambient temperature and pressure. The electrochemical results reveal that FeS2 /CFP achieves a high Faradaic efficiency (FE) of ≈14.14% and NH3 yield rate of ≈0.096 µg min-1 at -0.6 V versus RHE electrode in 0.25 m LiClO4 . During the electrochemical catalytic reaction, the crystal structure of FeS2 /CFP remains in the cubic pyrite phase, as analyzed by in situ X-ray diffraction measurements. With near-infrared laser irradiation (808 nm), the NH3 yield rate of the FeS2 /CFP catalyst can be slightly improved to 0.1 µg min-1 with high FE of 14.57%. Furthermore, density functional theory calculations demonstrate that the N2 molecule has strong chemical adsorption energy on the iron atom of FeS2 . Overall, iron pyrite-based materials have proven to be a potential electrocatalyst with photoactive behavior for ammonia production in practical applications.

Osteoporosis risk assessment using multilayered gold-nanoparticle thin film via SALDI-MS measurement.

A powerful technique to detect bone biomarkers has been developed for assessment of osteoporosis at the early stage. Two-dimensional multilayered gold-nanoparticle thin film (MTF-AuNPs) was demonstrated as a promising test platform for detection of bone biomarker, hydroxyproline (HYP), measured by surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). With strong surface plasmon resonance and excellent homogeneity, facilely prepared, highly ordered, and large-scale MTF-AuNPs revealed high sensitivity of HYP in the SALDI-MS measurement without additional matrixes, such as α-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB). Furthermore, the mass spectrum of HYP with MTF-AuNPs was significantly improved in signal intensity enhancement, background noise reduction, and signal-to-noise ratio amplification. The excellent reproducibility of HYP spectra with only 9.3% relative signal variation could be attributed to MTF-AuNPs' high absorbance at a wavelength of 337 nm, low heat capacity, superior thermal conductivity, and outstanding homogeneity. The calibration curve showed high linear correlation between mass spectrum intensity and HYP concentration in the range of 1 to 100 µM, covering the whole level in healthy people and osteoporosis patients. In particular, the serum sample was directly deposited onto the MTF-AuNP sample substrate without any pretreatment and its HYP concentration was then successfully determined. We believe that the combination of SALDI-MS and MTF-AuNP sample substrates would be a potential approach for bone biomarker detection in the osteoporosis risk assessment. Graphical abstract.

Facile synthesis of two-dimensional Ruddlesden-Popper perovskite quantum dots with fine-tunable optical properties.

In hybrid organic-inorganic and all-inorganic metal halide perovskite nanomaterials, two-dimensional (2D) Ruddlesden-Popper (RP) perovskites have become one of the most interesting materials because of tunable bandgaps varied with the layer thickness, effective modulation of the electron-hole confinement, and high stability. Here, we report a one-pot synthesis of 2D RP perovskite (BA)2(MA)n - 1PbnX3n + 1 (BA = 1-butylammonium, MA = methylammonium, X = Br or I) quantum dots (QDs) with an average size of 10 nm at room temperature. The (BA)2(MA)n - 1PbnBr3n + 1 (Br series) QDs and (BA)2(MA)n - 1PbnI3n + 1 (I series) QDs exhibited tunable emitting spectrum in the range of 410-523 nm and 527-761 nm, respectively, with full width at half maximum (FWHM) of 12-75 nm. The emission color was tuned by the ratio of MA and halide. The photoluminescence quantum yield of 2D perovskite QDs reached 48.6% with more thermodynamic stability in comparison with 3D MAPbX3 QDs. Overall results indicated that developing a solution synthesis for 2D RP perovskite QDs with great optical properties paves the way toward future optoelectronic devices and perovskite quantum dot photovoltaics.

Quantitative Analysis of Glucose Metabolic Cleavage in Glucose Transporters Overexpressed Cancer Cells by Target-Specific Fluorescent Gold Nanoclusters.

The glucose metabolism rate in cancer cells is a crucial piece of information for the cancer aggressiveness. A feasible method to monitor processes of oncogenic mutations has been demonstrated in this work. The fluorescent gold nanoclusters conjugated with glucose (glucose-AuNCs) were successfully synthesized as a cancer-targeting probe for glucose transporters (Gluts) overexpressed by U-87 MG cancer cells, which can be observed under confocal microscopy. The structural and optical characterizations of fluorescent glucose-AuNCs were confirmed by transmission electron microscope (TEM) and Fourier transform infrared spectroscopy (FTIR). The MTT assay exhibited the high biocompatibility of water-soluble glucose-AuNCs for further biomedical applications. The glucose metabolic cleavage of glucose-AuNCs by glycolytic enzymes from U-87 MG cancer cell was measured by fluorescence change of glucose-AuNCs. The fluorescence change based on the integrated area under fluorescence spectra ( A t) of glucose-AuNCs was plotted as a function of different reaction time ( t) with glycolytic enzymes. The fitted curve of A t versus t showed the first-order kinetics to explain the mechanism of glucose metabolic cleavage rate of glucose-AuNCs by glycolytic enzymes. The rate constant k could be utilized to determine the glucose metabolism rate of glucose-AuNCs for the quantitative analysis of cancer aggressiveness. Our work provides a practical application of target-specific glucose-AuNCs as a fluorescence probe to analyze the glucose metabolism in Gluts overexpressed cancer cells.

Highly oriented Langmuir-Blodgett film of silver cuboctahedra as an effective matrix-free sample plate for surface-assisted laser desorption/ionization mass spectrometry.

The design of a homogeneous sample plate to solve the sweet heating spot issues is the key step to expand the applicability of surface-assisted laser desorption/ionization mass spectrometry (SALDI MS). Herein, large-scale and highly oriented Langmuir-Blodgett (LB) films of uniform silver nanocrystals have been fabricated as a highly efficient and matrix-free sample plate for SALDI MS. Three individual silver nanocrystals (cubes, cuboctahedra and octahedra) assembled LB films have been applied as the sample plates for glucose detection by SALDI MS without an additional matrix. The results show that the signal intensity, background noise, signal-to-noise ratio and reproducibility have been significantly improved using LB films as the sample plate in comparison with commercial matrixes of CHCA and DHB. In particular, a relative signal of 5.7% was obtained for LB films of silver cuboctahedra. The significant improvement in the SALDI MS measurement could be attributed to the homogenous dissipation of laser irradiation energy to create a large area of the sweet heating spot on well-oriented silver cuboctahedra-based LB film. This ready-to-use sample plate has the potential for widespread commercial applications in SALDI MS.

Advanced rechargeable aluminium ion battery with a high-quality natural graphite cathode.

Recently, interest in aluminium ion batteries with aluminium anodes, graphite cathodes and ionic liquid electrolytes has increased; however, much remains to be done to increase the cathode capacity and to understand details of the anion-graphite intercalation mechanism. Here, an aluminium ion battery cell made using pristine natural graphite flakes achieves a specific capacity of ∼110 mAh g-1 with Coulombic efficiency ∼98%, at a current density of 99 mA g-1 (0.9 C) with clear discharge voltage plateaus (2.25-2.0 V and 1.9-1.5 V). The cell has a capacity of 60 mAh g-1 at 6 C, over 6,000 cycles with Coulombic efficiency ∼ 99%. Raman spectroscopy shows two different intercalation processes involving chloroaluminate anions at the two discharging plateaus, while C-Cl bonding on the surface, or edges of natural graphite, is found using X-ray absorption spectroscopy. Finally, theoretical calculations are employed to investigate the intercalation behaviour of choloraluminate anions in the graphite electrode.