Preventing Subsidence Reoccurrence in Tianjin: New Preconsolidation Head and Safe Pumping Buffer.

Tianjin, a coastal metropolis in north China, has grappled with land subsidence for nearly a century. Yet, emerging evidence suggests a notable decrease in subsidence rates across Tianjin since 2019. This trend is primarily attributed to the importation of surface water from the Yangtze River system via the South-to-North Water Diversion Project, initiated in December 2014. Utilizing Sentinel-1A Interferometric Synthetic Aperture Radar (InSAR) data (2014-2023), this study reveals that one-third of the Tianjin plain has either halted subsidence or experienced land rebound. As a result, the deep aquifer system (~-200 to -450 m) beneath one third of the Tianjin plain has completed a consolidation cycle, leading to the establishment of new, locally specific preconsolidation heads. The identification of the newly established preconsolidation head seeks to answer a crucial question: How can we prevent the reoccurrence of subsidence in areas where it has already ceased? In essence, subsidence will stop when the local hydraulic head elevates to the new preconsolidation head (NPCH), and permanent subsidence will not be reinitiated as long as hydraulic head remains above the NPCH. The difference of the depth between current hydraulic head and the NPCH defines the safe pumping buffer (SPB). This study outlines detailed methods for identifying the NPCHs in the deep aquifer system from long-term InSAR and groundwater-level datasets. Determining NPCHs and ascertaining SPBs are crucial for estimating how much groundwater can be safely extracted without inducing permanent subsidence, and for developing sustainable strategies for long-term groundwater management and conservation.

Pangenome analysis reveals genomic variations associated with domestication traits in broomcorn millet.

Broomcorn millet (Panicum miliaceum L.) is an orphan crop with the potential to improve cereal production and quality, and ensure food security. Here we present the genetic variations, population structure and diversity of a diverse worldwide collection of 516 broomcorn millet genomes. Population analysis indicated that the domesticated broomcorn millet originated from its wild progenitor in China. We then constructed a graph-based pangenome of broomcorn millet based on long-read de novo genome assemblies of 32 representative accessions. Our analysis revealed that the structural variations were highly associated with transposable elements, which influenced gene expression when located in the coding or regulatory regions. We also identified 139 loci associated with 31 key domestication and agronomic traits, including candidate genes and superior haplotypes, such as LG1, for panicle architecture. Thus, the study's findings provide foundational resources for developing genomics-assisted breeding programs in broomcorn millet.

The osmotic stress-activated receptor-like kinase DPY1 mediates SnRK2 kinase activation and drought tolerance in Setaria.

Plant genomes encode many receptor-like kinases (RLKs) that localize to the cell surface and perceive a wide variety of environmental cues to initiate downstream signaling cascades. Whether these RLKs participate in dehydration stress signaling in plants is largely unknown. DROOPY LEAF1 (DPY1), a leucine-rich repeat (LRR)-RLK, was recently shown to regulate plant architecture by orchestrating early brassinosteroid signaling in foxtail millet (Setaria italica). Here, we show that DPY1 is essential for the acclimation of foxtail millet to drought stress. DPY1 can be phosphorylated and activated in response to osmotic stress and is required for more than half of osmotic stress-induced global phosphorylation events, including the phosphorylation of sucrose nonfermenting kinase 2s (SnRK2s), the central kinases involved in osmotic stress. DPY1 acts upstream of STRESS-ACTIVATED PROTEIN KINASE 6 (SAPK6, a subclass I SnRK2) and is required for full SAPK6 activation, thereby allowing regulation of downstream genes to mount a response against drought stress. These signaling events are largely independent of DPY1-mediated brassinosteroid signaling. The DPY1-SAPK6 module is specific to seed plants and is absent in ancestral nonseed plants. Our findings reveal a dehydration stress-activated RLK that plays an indispensable role in osmotic stress signaling and mediates SnRK2 activation at the cell surface.

A graph-based genome and pan-genome variation of the model plant Setaria.

Setaria italica (foxtail millet), a founder crop of East Asian agriculture, is a model plant for C4 photosynthesis and developing approaches to adaptive breeding across multiple climates. Here we established the Setaria pan-genome by assembling 110 representative genomes from a worldwide collection. The pan-genome is composed of 73,528 gene families, of which 23.8%, 42.9%, 29.4% and 3.9% are core, soft core, dispensable and private genes, respectively; 202,884 nonredundant structural variants were also detected. The characterization of pan-genomic variants suggests their importance during foxtail millet domestication and improvement, as exemplified by the identification of the yield gene SiGW3, where a 366-bp presence/absence promoter variant accompanies gene expression variation. We developed a graph-based genome and performed large-scale genetic studies for 68 traits across 13 environments, identifying potential genes for millet improvement at different geographic sites. These can be used in marker-assisted breeding, genomic selection and genome editing to accelerate crop improvement under different climatic conditions.

[Research progress in role of autophagy in diabetic wound healing and traditional Chinese medicine intervention].

Diabetic ulcer(DU) is a chronic and refractory ulcer which often occurs in the foot or lower limbs. It is a diabetic complication with high morbidity and mortality. The pathogenesis of DU is complex, and the therapies(such as debridement, flap transplantation, and application of antibiotics) are also complex and have long cycles. DU patients suffer from great economic and psychological pressure while enduring pain. Therefore, it is particularly important to promote rapid wound healing, reduce disability and mortality, protect limb function, and improve the quality of life of DU patients. By reviewing the relevant literatures, we have found that autophagy can remove DU wound pathogens, reduce wound inflammation, and accelerate ulcer wound healing and tissue repair. The main autophagy-related factors microtubule-binding light chain protein 3(LC3), autophagy-specific gene Beclin-1, and ubiquitin-binding protein p62 mediate autophagy. The traditional Chinese medicine(TCM) treatment of DU mitigates clinical symptoms, accelerates ulcer wound healing, reduces ulcer recurrence, and delays further deterioration of DU. Furthermore, under the guidance of syndrome differentiation and treatment and the overall concept, TCM treatment harmonizes yin and yang, ameliorates TCM syndrome, and treats underlying diseases, thereby curing DU from the root. Therefore, this article reviews the role of autophagy and major related factors LC3, Beclin-1, and p62 in the healing of DU wounds and the intervention of TCM, aiming to provide reference for the clinical treatment of DU wounds and subsequent in-depth studies.

[Research advances in role of angiogenesis in diabetic ulcer and traditional Chinese medicine intervention].

Diabetic ulcer(DU) is one of the common complications of diabetes often occurring in the peripheral blood vessels of lower limbs or feet with a certain degree of damage. It has high morbidity and mortality, a long treatment cycle, and high cost. DU is often clinically manifested as skin ulcers or infections in the lower limbs or feet. In severe cases, it can ulcerate to the surface of tendons, bones or joint capsules, and even bone marrow. Without timely and correct treatment, most of the patients will have ulceration and blackening of the extremities. These patients will not be able to preserve the affected limbs through conservative treatment, and amputation must be performed. The etiology and pathogenesis of DU patients with the above condition are complex, which involves blood circulation interruption of DU wound, poor nutrition supply, and failure in discharge of metabolic waste. Relevant studies have also confirmed that promoting DU wound angiogenesis and restoring blood supply can effectively delay the occurrence and development of wound ulcers and provide nutritional support for wound healing, which is of great significance in the treatment of DU. There are many factors related to angiogenesis, including pro-angiogenic factors and anti-angiogenic factors. The dynamic balance between them plays a key role in angiogenesis. Meanwhile, previous studies have also confirmed that traditional Chinese medicine can enhance pro-angiogenic factors and down-regulate anti-angiogenic factors to promote angiogenesis. In addition, many experts and scholars have proposed that traditional Chinese medicine regulation of DU wound angiogenesis in the treatment of DU has broad prospects. Therefore, by consulting a large number of studies available, this paper expounded on the role of angiogenesis in DU wound and summarized the research advance in traditional Chinese medicine intervention in promoting the expression of angiogenic factors [vascular endothelial growth factor(VEGF), fibroblast growth factor(FGF), and angiopoietin(Ang)] which played a major role in promoting wound angiogenesis in the treatment of DU to provide ideas for further research and new methods for clinical treatment of DU.

Corrigendum: Network pharmacology and experimental study of phenolic acids in salvia miltiorrhiza bung in preventing ischemic stroke.

[This corrects the article DOI: 10.3389/fphar.2023.1108518.].

Network pharmacology and experimental study of phenolic acids in salvia miltiorrhiza bung in preventing ischemic stroke.

At present, the preventive effect of ischemic stroke is not ideal, and the preventive drugs are limited. Danshen, the dried root of Salvia miltiorrhiza Bge, is a common medicinal herb in Traditional Chinese Medicine, which has been used for the treatment of cardiovascular diseases for many years. Phenolic Acids extracted from danshen, which showed multiple biological activities, have been developed as an injection for the treatment of ischemic stroke. However, its preventive effect on ischemic stroke has not been fully reported. The current study aimed to identify the potential active phenolic acids for the prevention of ischemic stroke and explore its mechanism using network pharmacology and experimental analyses. The targets of phenolic acids and ischemic stroke were obtained from public databases. Network pharmacology predicted that 35 kinds of phenolic acids had 201 core targets with ischemic stroke. The core prevention targets of ischemic stroke include IL-6, AKT1, VEGFA, etc. The signaling pathways involved in core targets include AGE-RAGE signaling pathway, HIF-1 signaling pathway, and cAMP signaling pathways, etc. Then, the antiplatelet effect of phenolic acids was screened by in vitro antiplatelet experiment. Our results showed that phenolic acids have a good inhibitory effect on ADP-induced platelet aggregation and salvianolic acid A had a good antiplatelet effect. We further demonstrated that SAA preventive administration reduced neurobehavioral scores, decreased infarct size, and protected tight junction proteins in autologous thrombus stroke model. These studies not only shed light on the potential mechanisms of phenolic acids active components on ischemic stroke, but also provided theoretical and experimental information for the development of new medicines from Danshen for the prevention of ischemic stroke. In addition, our results suggest that SAA has the potential to be a candidate for ischemic stroke prevention drug.

Click chemistry-induced modification of acrylated cellulose nanocrystals for application in PVA-based nanocomposites.

The surface functionalization of cellulose nanocrystals (CNC) is crucial for promoting their diverse applications, especially regarding their use as sustainable biobased polymer reinforcements. In this study, we develop poly (vinyl alcohol) (PVA)-CNC composites with improved tensile strength and gas-barrier performance using CNC-based nanofillers. Acrylated CNCs (ACNCs) were prepared from cellulose via one-pot acid hydrolysis/Fischer esterification; subsequently, surface modification was performed through a thiol-ene reaction to obtain surface-thiolated ACNCs, namely, DACNC, MACNC, and PACNC. The various functional groups on the surface-thiolated ACNCs not only affect the dispersion stability but also alter their interfacial interactions with the PVA matrix, thus realizing the PVA nanocomposites with tailored properties, including the thermal properties, mechanical properties, and gas barrier performance. This study demonstrates that surface-thiolated ACNCs with appropriate surface chemistry and loading levels can serve as excellent nanofillers for PVA, forming biobased composites with desired properties.

Factors associated with the decision to administer ß-lactams via prolonged infusion in patients with sepsis: a prospective observational cohort study.

OBJECTIVE: ß-lactams are the most widely used antibiotics in sepsis. We aimed to explore the factors that drive physicians to choose prolonged infusion (PI) of ß-lactams in septic patients. METHODS: This prospective observational national cohort study was conducted in 40 ICUs at the teaching hospitals of 31 provinces in China between August 20, 2021 and September 20, 2021. RESULTS: Of the 441 enrolled patients, 265 (60.09%) received PI therapy. Multivariate analysis showed that multidrug-resistant bacterial infection and septic shock were independent factors associated with PI. However, our data showed that the survival benefit of PI use was evident in subgroups with less severe sepsis, including those with lower Charlson comorbidity index values (<2), those without septic shock, and those with lower acute physiology and chronic health evaluation II scores (<15). Univariate and multivariate Cox regression indicated that PI was an independent protective factor of 28d mortality, even after adjusting the variables associated with disease severity. CONCLUSIONS: PI for administering ß-lactams was not a commonly applied strategy in sepsis and was more likely to be used in severely ill patients. However, PI had a survival benefit independent of disease severity.

Fire Behavior and Failure Model of Multilayered Wood Flour/HDPE/Polycarbonate Composites with a Sandwich Structure.

The flame retardancy of wood-polymer composites significantly affects their potential applications. Thus, multilayered wood flour/high-density polyethylene (HDPE)/polycarbonate (PC) composites were prepared via thermocompression to improve the fire retardancy of wood-polymer composites in this paper. Thermal degradation behavior, flame retardancy, and flexural strengths of the resulting composites were investigated using a thermogravimetric analysis, cone calorimetry, and mechanical testing machine, respectively. Results revealed that the boric acid treatment reduced the heat release rate and total heat release of the wood flour/HDPE composites and increased their mass of residues. However, boric acid reduced the flexural strength of the resulting composites. The combustion test indicated that PC cap layers suppressed the combustion of the resulting composites via the formation of carbon layers. Adding PC layers reduced heat release and increased the flexural strength of the resulting composites. Finally, the failure mode of the multilayered wood flour/HDPE/PC composites in the three-point flexural test was simulated by finite element analysis.

Fermented Minor Grain Foods: Classification, Functional Components, and Probiotic Potential.

Fermented minor grain (MG) foods often have unique nutritional value and functional characteristics, which are important for developing dietary culture worldwide. As a kind of special raw material in fermented food, minor grains have special functional components, such as trace elements, dietary fiber, and polyphenols. Fermented MG foods have excellent nutrients, phytochemicals, and bioactive compounds and are consumed as a rich source of probiotic microbes. Thus, the purpose of this review is to introduce the latest progress in research related to the fermentation products of MGs. Specific discussion is focused on the classification of fermented MG foods and their nutritional and health implications, including studies of microbial diversity, functional components, and probiotic potential. Furthermore, this review discusses how mixed fermentation of grain mixtures is a better method for developing new functional foods to increase the nutritional value of meals based on cereals and legumes in terms of dietary protein and micronutrients.

Design and Experiment Using Flexible Bumps for Piezoelectric-Driven Hydraulically Amplified Braille Dot Display.

This paper describes the design of a piezoelectric-driven hydraulically amplified Braille-flexible bump device that enables the flexible formation of Braille characters. A piezoelectric vibrator is used to excite fluid resonance in a cavity, and displacement is realized by compressing the fluid, allowing Braille character dots to be formed. First, the structural design and working principle of the device, as well as the method used to drive the fluid, are explained. Expressions for the output displacement and amplification ratio of the flexible film and piezoelectric vibrator are then obtained through kinetic analysis of the system unit. Subsequently, the structural parameters that affect the output displacement and the liquid amplification are described. Finally, experimental tests of the system are explained. The results indicate that the output displacement of the contact formed by the flexible film reaches 0.214 mm, satisfying the requirements of the touch sensitivity standard for the blind, when the fluid cavity diameter measures 31 mm and the resonance frequency is 375.4 Hz. The corresponding water discharge is 8.8 mL. This study proves that constructing a Braille bump device in this way is both feasible and effective.

Chitosan Nanovaccines as Efficient Carrier Adjuvant System for IL-12 with Enhanced Protection Against HBV.

PURPOSE: Alum adjuvant in HBV prophylactic vaccines is poor in inducing cellular immunity with the inhibition of IL-12 secretion, and approximately 5-10% of immunised individuals fail to clear HBV upon infection. IL-12 plasmids (pIL-12) as adjuvants enhance significant humoral and cellular immune response in vaccines. However, finding a novel delivery system to protect pIL-12 from enzymatic degradation and achieve efficient delivery remains a major challenge. METHODS: We prepared the chitosan nanovaccine-loaded IL-12 expression plasmid (termed as "Ng(-)pIL-12") and analysed the physicochemical properties, encapsulation efficiency and safety. Then, we evaluated the efficiency of Ng(-)pIL-12 for prophylactic HBV vaccine. Serum samples were collected and analysed for IL-12, HBsAg, anti-HBs IgG, IgG1 and IgG2b. Liver tissues were collected and analysed for HBV DNA and RNA. BMDCs and lymphocytes were collected and analysed for HBV-specific immune responses. To further confirm the long-term protective immune response against HBV, these immunised mice were challenged with hydrodynamic injection of pAAV/HBV 1.2 plasmid on day 56 after the initiation of immunisation. RESULTS: Chitosan nanovaccine prepared with CS and γ-PGA could load pIL-12 effectively and safely, and IL-12 was efficiently produced in vivo. Interestingly, Ng(-)pIL-12 adjuvant combined with HBsAg induced higher levels of anti-HBs IgG, IgG1 and IgG2b, promoted maturation and presentation capacity of DCs, especially CD8α+/CD103+ DCs. Meanwhile, Ng(-)pIL-12 adjuvant generated robust HBV-specific CD8+ T and CD4+ T cell responses. More importantly, Ng(-)pIL-12 adjuvant triggered terminally differentiated effector memory responses with strong anti-HBV effects. CONCLUSION: Chitosan nanovaccines as an efficient carrier adjuvant system for pIL-12 combined with HBsAg induced protective anti-HBs IgG and enhanced HBV-specific CD8+ T and CD4+ T cell responses, and achieved long-term memory response against HBV, making it a promising candidate for prophylactic HBV vaccines.

Fire Retardancy, Water Absorption, and Viscoelasticity of Borated Wood-Polycarbonate Biocomposites.

Demand for high-performance biocomposites is increasing due to their ease of processing, low environmental impact, and in-service performance. This study investigated the effect of boric acid modification of wood flour on polycarbonate (PC) wood composites' thermal stability, fire retardancy, water absorption, and creep behavior. The composites' fire retardancy increased with increasing wood flour content, and their char residue increased by 102.3% compared to that of pure PC. However, the water absorption of the resulting composites increased due to the hydroxyl groups of the wood flour. Wood flour also improved the composites' anti-creep properties. The excellent fire retardancy and anti-creep properties of wood-PC composites expand their use in the construction sector.

Genetic control and phenotypic characterization of panicle architecture and grain yield-related traits in foxtail millet (Setaria italica).

KEY MESSAGE: Multi-environment QTL mapping identified 23 stable loci and 34 co-located QTL clusters for panicle architecture and grain yield-related traits, which provide a genetic basis for foxtail millet yield improvement. Panicle architecture and grain weight, both of which are influenced by genetic and environmental factors, have significant effects on grain yield potential. Here, we used a recombinant inbred line (RIL) population of 333 lines of foxtail millet, which were grown in 13 trials with varying environmental conditions, to identify quantitative trait loci (QTL) controlling nine agronomic traits related to panicle architecture and grain yield. We found that panicle weight, grain weight per panicle, panicle length, panicle diameter, and panicle exsertion length varied across different geographical locations. QTL mapping revealed 159 QTL for nine traits. Of the 159 QTL, 34 were identified in 2 to 12 environments, suggesting that the genetic control of panicle architecture in foxtail millet is sensitive to photoperiod and/or other environmental factors. Eighty-eight QTL controlling different traits formed 34 co-located QTL clusters, including the triple QTL cluster qPD9.2/qPL9.5/qPEL9.3, which was detected 23 times in 13 environments. Several candidate genes, including Seita.2G388700, Seita.3G136000, Seita.4G185300, Seita.5G241500, Seita.5G243100, Seita.9G281300, and Seita.9G342700, were identified in the genomic intervals of multi-environmental QTL or co-located QTL clusters. Using available phenotypic and genotype data, we conducted haplotype analysis for Seita.2G002300 and Seita.9G064000,which showed high correlations with panicle weight and panicle exsertion length, respectively. These results not only provided a basis for further fine mapping, functional studies and marker-assisted selection of traits related to panicle architecture in foxtail millet, but also provide information for comparative genomics analyses of cereal crops.

Chemical Modifications of Continuous Aramid Fiber for Wood Flour/High-Density-Polyethylene Composites with Improved Interfacial Bonding.

To expand the use of wood plastic composites in the structural and engineering constructions applications, continuous aramid fiber (CAF) with nondestructive modification was incorporated as reinforcement material into wood-flour and high-density-polyethylene composites (WPC) by extrusion method with a special die. CAF was treated with dopamine (DPA), vinyl triethoxysilane (VTES), and DPA/VTES, respectively. The effects of these modifications on compatibility between CAF and WPCs and the properties of the resulting composites were explored. The results showed that compared with the original CAF, the adhesion strength of DPA and VTES combined modified CAF and WPCs increased by 143%. Meanwhile, compared with pure WPCs, CAF after modification increased the tensile strength, tensile modulus, and impact strength of the resulting composites by 198, 92, and 283%, respectively.

QTL mapping for foxtail millet plant height in multi-environment using an ultra-high density bin map.

KEY MESSAGE: Using a fixed RIL population derived from a widely used foxtail millet backbone breeding line and an elite cultivar, we constructed a high-density bin map and identified six novel multi-environment effect QTLs and seven candidate genes for dwarf phenotype. Plant height is an important trait that determines tradeoffs between competition and resource allocation, which is crucial for yield potential. To improve the C4 model plant foxtail millet (Setaria italica) productivity, it is necessary to isolate plant height-related genes that contribute to ideal plant architecture in breeding. In the present study, we generated a foxtail millet population of 333 recombinant inbred lines (RILs) derived from a cross between a backbone line Ai 88 and an elite cultivar Liaogu 1. We evaluated plant height in 13 environmental conditions across 4 years, the mean plant height of the RIL population ranged from 89.5 to 149.9 cm. Using deep re-sequencing data, we constructed a high-density bin map with 3744 marker bins. Quantitative trait locus (QTL) mapping identified 26 QTLs significantly associated with plant height. Of these, 13 QTLs were repeatedly detected under multiple environments, including six novel QTLs that have not been reported before. Seita.1G242300, a gene encodes gibberellin 2-oxidase-8, which was detected in nine environments in a 1.54-Mb interval of qPH1.3, was considered as an important candidate gene. Moreover, other six genes involved in GA biosynthesis or signaling pathways, and fifteen genes encode F-box domain proteins which might function as E3 ligases, were also considered as candidate genes in different QTLs. These QTLs and candidate genes identified in this study will help to elucidate the genetic basis of foxtail millet plant height, and the linked markers will be useful for marker-assistant selection of varieties with ideal plant architecture and high yield potential.

Multifunctional Reversible Self-Assembled Structures of Cellulose-Derived Phase-Change Nanocrystals.

Owing to advantageous properties attributed to well-organized structures, multifunctional materials with reversible hierarchical and highly ordered arrangement in solid-state assembled structures have drawn tremendous interest. However, such materials rarely exist. Based on the reversible phase transition of phase-change materials (PCMs), phase-change nanocrystals (C18-UCNCs) are presented herein, which are capable of self-assembling into well-ordered hierarchical structures. C18-UCNCs have a core-shell structure consisting of a cellulose crystalline core that retains the basic structure and a soft shell containing octadecyl chains that allow phase transition. The distinct core-shell structure and phase transition of octadecyl chains allow C18-UCNCs to self-assemble into flaky nano/microstructures. These self-assembled C18-UCNCs exhibit efficient thermal transport and light-to-thermal energy conversion, and thus are promising for thermosensitive imaging. Specifically, flaky self-assembled nano/microstructures with manipulable surface morphology, surface wetting, and optical properties are thermoreversible and show thermally induced self-healing properties. By using phase-change nanocrystals as a novel group of PCMs, reversible self-assembled multifunctional materials can be engineered. This study proposes a promising approach for constructing self-assembled hierarchical structures by using phase-change nanocrystals and thereby significantly expands the application of PCMs.

Long Noncoding RNA LINC01207 Promotes Colon Cancer Cell Proliferation and Invasion by Regulating miR-3125/TRIM22 Axis.

Increasing study has validated that long noncoding RNAs (lncRNAs) are involved in the growth and metastasis of colon cancer. LINC01207 has been reported to play vital roles in certain types of cancer, while the precise function of LINC01207 in the progression of colon cancer remains unclear. The objective of this study was to investigate the effect of LINC01207 on the growth and metastasis of colon cancer cells and to explore the underlying mechanism. We found that the expression of LINC01207 was significantly upregulated in colon adenocarcinoma tissues compared with normal tissues by the GEPIA database. Notably, silencing of LINC01207 significantly suppressed the proliferation, migration, and invasion abilities of SW480 and HT-29 cells. Mechanistically, our data demonstrated that LINC01207 could sponge miR-3125 in colon cancer cells. Moreover, miR-3125 could directly target TRIM22 and negatively regulate its expression. Rescue assays revealed that miR-3125 inhibitor or TRIM22 overexpression significantly reversed the repressive role of LINC01207 knockdown in colon cancer cell proliferation and invasion. In conclusion, LINC01207 exerts an oncogenic role in the progression of colon cancer by absorbing miR-3125 to modulating TRIM22 expression.