[Printing Process Quality Control of Bioprinting Medical Devices].

Objective: This study analyzes the risk points in the quality control of bioink and the main processes of bioprinting, clarifies and explores the quality control and supervision model for bioprinting medical devices, and provides theoretical and practical guidance to ensure the safety and effectiveness of bioprinting medical devices. Methods: The quality control risk points throughout the bioprinting process were comprehensively analyzed, with a particular focus on bioprinting materials and key processes. The regulatory model and methods for bioprinting medical devices were examined. This research concentrated on critical technologies such as extrusion, laser-assisted, and in situ bioprinting, assessing their potential for clinical applications and regulatory challenges. Results: Bioink from different sources should meet regulatory requirements. It is essential to ensure aseptic handling of raw materials and to validate sterilization under "worst-case" conditions. Conclusion: As bioprinting technology advances rapidly, corresponding research into materials, processes, and quality risk control should be conducted to ensure the concurrent development of the regulatory system. This will continuously contribute to the orderly progression of the entire industry and human health.

Multi-omics characterization of esophageal squamous cell carcinoma identifies molecular subtypes and therapeutic targets.

Esophageal squamous cell carcinoma (ESCC) is the predominant form of esophageal cancer and is characterized by an unfavorable prognosis. To elucidate the distinct molecular alterations in ESCC and investigate therapeutic targets, we performed a comprehensive analysis of transcriptomics, proteomics, and phosphoproteomics data derived from 60 paired treatment-naive ESCC and adjacent nontumor tissue samples. Additionally, we conducted a correlation analysis to describe the regulatory relationship between transcriptomic and proteomic processes, revealing alterations in key metabolic pathways. Unsupervised clustering analysis of the proteomics data stratified patients with ESCC into 3 subtypes with different molecular characteristics and clinical outcomes. Notably, subtype III exhibited the worst prognosis and enrichment in proteins associated with malignant processes, including glycolysis and DNA repair pathways. Furthermore, translocase of inner mitochondrial membrane domain containing 1 (TIMMDC1) was validated as a potential prognostic molecule for ESCC. Moreover, integrated kinase-substrate network analysis using the phosphoproteome nominated candidate kinases as potential targets. In vitro and in vivo experiments further confirmed casein kinase II subunit α (CSNK2A1) as a potential kinase target for ESCC. These underlying data represent a valuable resource for researchers that may provide better insights into the biology and treatment of ESCC.

Expert consensus on Prospective Precision Diagnosis and Treatment Strategies for Osteoporotic Fractures.

Osteoporotic fractures are the most severe complications of osteoporosis, characterized by poor bone quality, difficult realignment and fixation, slow fracture healing, and a high risk of recurrence. Clinically managing these fractures is relatively challenging, and in the context of rapid aging, they pose significant social hazards. The rapid advancement of disciplines such as biophysics and biochemistry brings new opportunities for future medical diagnosis and treatment. However, there has been limited attention to precision diagnosis and treatment strategies for osteoporotic fractures both domestically and internationally. In response to this, the Chinese Medical Association Orthopaedic Branch Youth Osteoporosis Group, Chinese Geriatrics Society Geriatric Orthopaedics Committee, Chinese Medical Doctor Association Orthopaedic Physicians Branch Youth Committee Osteoporosis Group, and Shanghai Association of Integrated Traditional Chinese and Western Medicine Osteoporosis Professional Committee have collaborated to develop this consensus. It aims to elucidate emerging technologies that may play a pivotal role in both diagnosis and treatment, advocating for clinicians to embrace interdisciplinary approaches and incorporate these new technologies into their practice. Ultimately, the goal is to improve the prognosis and quality of life for elderly patients with osteoporotic fractures.

Corrigendum to "3D-printed tri-element-doped hydroxyapatite/ polycaprolactone composite scaffolds with antibacterial potential for osteosarcoma therapy and bone regeneration" [Bioact. Mater. 31 (January 2024) 18-37].

[This corrects the article DOI: 10.1016/j.bioactmat.2023.07.004.].

Nanozymes With Osteochondral Regenerative Effects: An Overview of Mechanisms and Recent Applications.

With the discovery of the intrinsic enzyme-like activity of metal oxides, nanozymes garner significant attention due to their superior characteristics, such as low cost, high stability, multi-enzyme activity, and facile preparation. Notably, in the field of biomedicine, nanozymes primarily focus on disease detection, antibacterial properties, antitumor effects, and treatment of inflammatory conditions. However, the potential for application in regenerative medicine, which primarily addresses wound healing, nerve defect repair, bone regeneration, and cardiovascular disease treatment, is garnering interest as well. This review introduces nanozymes as an innovative strategy within the realm of bone regenerative medicine. The primary focus of this approach lies in the facilitation of osteochondral regeneration through the modulation of the pathological microenvironment. The catalytic mechanisms of four types of representative nanozymes are first discussed. The pathological microenvironment inhibiting osteochondral regeneration, followed by summarizing the therapy mechanism of nanozymes to osteochondral regeneration barriers is introduced. Further, the therapeutic potential of nanozymes for bone diseases is included. To improve the therapeutic efficiency of nanozymes and facilitate their clinical translation, future potential applications in osteochondral diseases are also discussed and some significant challenges addressed.

Two-stage multi-task deep learning framework for simultaneous pelvic bone segmentation and landmark detection from CT images.

PURPOSE: Pelvic bone segmentation and landmark definition from computed tomography (CT) images are prerequisite steps for the preoperative planning of total hip arthroplasty. In clinical applications, the diseased pelvic anatomy usually degrades the accuracies of bone segmentation and landmark detection, leading to improper surgery planning and potential operative complications. METHODS: This work proposes a two-stage multi-task algorithm to improve the accuracy of pelvic bone segmentation and landmark detection, especially for the diseased cases. The two-stage framework uses a coarse-to-fine strategy which first conducts global-scale bone segmentation and landmark detection and then focuses on the important local region to further refine the accuracy. For the global stage, a dual-task network is designed to share the common features between the segmentation and detection tasks, so that the two tasks mutually reinforce each other's performance. For the local-scale segmentation, an edge-enhanced dual-task network is designed for simultaneous bone segmentation and edge detection, leading to the more accurate delineation of the acetabulum boundary. RESULTS: This method was evaluated via threefold cross-validation based on 81 CT images (including 31 diseased and 50 healthy cases). The first stage achieved DSC scores of 0.94, 0.97, and 0.97 for the sacrum, left and right hips, respectively, and an average distance error of 3.24 mm for the bone landmarks. The second stage further improved the DSC of the acetabulum by 5.42%, and this accuracy outperforms the state-of-the-arts (SOTA) methods by 0.63%. Our method also accurately segmented the diseased acetabulum boundaries. The entire workflow took ~ 10 s, which was only half of the U-Net run time. CONCLUSION: Using the multi-task networks and the coarse-to-fine strategy, this method achieved more accurate bone segmentation and landmark detection than the SOTA method, especially for diseased hip images. Our work contributes to accurate and rapid design of acetabular cup prostheses.

Advances in 3D Printing of Highly Bioadaptive Bone Tissue Engineering Scaffolds.

The number of patients with bone defects caused by trauma, bone tumors, and osteoporosis has increased considerably. The repair of irregular, recurring, and large bone defects poses a great challenge to clinicians. Bone tissue engineering is emerging as an appropriate strategy to replace autologous bone grafting in the repair of critically sized bone defects. However, the suitability of bone tissue engineering scaffolds in terms of structure, mechanics, degradation, and the microenvironment is inadequate. Three-dimensional (3D) printing is an advanced additive-manufacturing technology widely used for bone repair. 3D printing constructs personalized structurally adapted scaffolds based on 3D models reconstructed from CT images. The contradiction between the mechanics and degradation is resolved by altering the stacking structure. The local microenvironment of the implant is improved by designing an internal pore structure and a spatiotemporal factor release system. Therefore, there has been a boom in the 3D printing of personalized bone repair scaffolds. In this review, successful research on the preparation of highly bioadaptive bone tissue engineering scaffolds using 3D printing is presented. The mechanisms of structural, mechanical, degradation, and microenvironmental adaptations of bone prostheses and their interactions were elucidated to provide a feasible strategy for constructing highly bioadaptive bone tissue engineering scaffolds.

3D-printed tri-element-doped hydroxyapatite/ polycaprolactone composite scaffolds with antibacterial potential for osteosarcoma therapy and bone regeneration.

The resection of malignant osteosarcoma often results in large segmental bone defects, and the residual cells can facilitate recurrence. Consequently, the treatment of osteosarcoma is a major challenge in clinical practice. The ideal goal of treatment for osteosarcoma is to eliminate it thoroughly, and repair the resultant bone defects as well as avoid bacterial infections. Herein, we fabricated a selenium/strontium/zinc-doped hydroxyapatite (Se/Sr/Zn-HA) powder by hydrothermal method, and then employed it with polycaprolactone (PCL) as ink to construct composite scaffolds through 3D printing, and finally introduced them in bone defect repair induced by malignant osteosarcoma. The resultant composite scaffolds integrated multiple functions involving anti-tumor, osteogenic, and antibacterial potentials, mainly attributed to the anti-tumor effects of SeO32-, osteogenic effects of Sr2+ and Zn2+, and antibacterial effects of SeO32- and Zn2+. In vitro studies confirmed that Se/Sr/Zn-HA leaching solution could induce apoptosis of osteosarcoma cells, differentiation of MSCs, and proliferation of MC3T3-E1 while showing excellent antibacterial properties. In vivo tests demonstrated that Se/Sr/Zn-HA could significantly suppress tumors after 8 days of injection, and the Se/Sr/Zn-HA-PCLs scaffold repaired femoral defects effectively after 3 months of implantation. Summarily, the Se/Sr/Zn-HA-PCLs composite scaffolds developed in this study were effective for tumor treatment, bone defect repair, and post-operative anti-infection, which provided a great potential to be a facile therapeutic material for osteosarcoma resection.

Automated tooth crown design with optimized shape and biomechanics properties.

Despite the large demand for dental restoration each year, the design of crown restorations is mainly performed via manual software operation, which is tedious and subjective. Moreover, the current design process lacks biomechanics optimization, leading to localized stress concentration and reduced working life. To tackle these challenges, we develop a fully automated algorithm for crown restoration based on deformable model fitting and biomechanical optimization. From a library of dental oral scans, a conditional shape model (CSM) is constructed to represent the inter-teeth shape correlation. By matching the CSM to the patient's oral scan, the optimal crown shape is estimated to coincide with the surrounding teeth. Next, the crown is seamlessly integrated into the finish line of preparation via a surface warping step. Finally, porous internal supporting structures of the crown are generated to avoid excessive localized stresses. This algorithm is validated on clinical oral scan data and achieved less than 2 mm mean surface distance as compared to the manual designs of experienced human operators. The mechanical simulation was conducted to prove that the internal supporting structures lead to uniform stress distribution all over the model.

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control.

To address the rehabilitation needs of upper limb hemiplegic patients in various stages of recovery, streamline the workload of rehabilitation professionals, and provide data visualization, our research team designed a six-degree-of-freedom upper limb exoskeleton rehabilitation robot inspired by the human upper limb's structure. We also developed an eight-channel synchronized signal acquisition system for capturing surface electromyography (sEMG) signals and elbow joint angle data. Utilizing Solidworks, we modeled the robot with a focus on modularity, and conducted structural and kinematic analyses. To predict the elbow joint angles, we employed a back propagation neural network (BPNN). We introduced three training modes: a PID control, bilateral control, and active control, each tailored to different phases of the rehabilitation process. Our experimental results demonstrated a strong linear regression relationship between the predicted reference values and the actual elbow joint angles, with an R-squared value of 94.41% and an average error of four degrees. Furthermore, these results validated the increased stability of our model and addressed issues related to the size and single-mode limitations of upper limb rehabilitation robots. This work lays the theoretical foundation for future model enhancements and further research in the field of rehabilitation.

3D-Printed Composite Bioceramic Scaffolds for Bone and Cartilage Integrated Regeneration.

Osteoarthritis may result in both cartilage and subchondral bone damage. It is a significant challenge to simultaneously repair cartilage due to the distinct biological properties between cartilage and bone. Here, strontium copper tetrasilicate/ß-tricalcium phosphate (Wesselsite[SrCuSi4O10]/Ca3(PO4)2, WES-TCP) composite scaffolds with different WES contents (1, 2, and 4 wt %) were fabricated via a three-dimensional (3D) printing method for the osteochondral regeneration. The physicochemical properties and biological activities of the scaffolds were systematically investigated. 2WES-TCP (WES-TCP with 2 wt % WES) composite scaffolds not only improved the compressive strength but also enhanced the proliferation of both rabbit bone mesenchymal stem cells (rBMSCs) and chondrocytes, as well as their differentiation. The in vivo study further confirmed that WES-TCP scaffolds significantly promoted the regeneration of both bone and cartilage tissue in rabbit osteochondral defects compared with pure TCP scaffolds owing to the sustained and controlled release of bioactive ions (Si, Cu, and Sr) from bioactive scaffolds. These results show that 3D-printed WES-TCP scaffolds with bilineage bioactivities take full advantage of the bifunctional properties of bioceramics to reconstruct the complex osteochondral interface, which broadens the approach to engineering therapeutic platforms for biomedical applications.

Deep learning-based workflow for hip joint morphometric parameter measurement from CT images.

Objective.Precise hip joint morphometry measurement from CT images is crucial for successful preoperative arthroplasty planning and biomechanical simulations. Although deep learning approaches have been applied to clinical bone surgery planning, there is still a lack of relevant research on quantifying hip joint morphometric parameters from CT images.Approach.This paper proposes a deep learning workflow for CT-based hip morphometry measurement. For the first step, a coarse-to-fine deep learning model is designed for accurate reconstruction of the hip geometry (3D bone models and key landmark points). Based on the geometric models, a robust measurement method is developed to calculate a full set of morphometric parameters, including the acetabular anteversion and inclination, the femoral neck shaft angle and the inclination, etc. Our methods were validated on two datasets with different imaging protocol parameters and further compared with the conventional 2D x-ray-based measurement method.Main results. The proposed method yields high bone segmentation accuracies (Dice coefficients of 98.18% and 97.85%, respectively) and low landmark prediction errors (1.55 mm and 1.65 mm) on both datasets. The automated measurements agree well with the radiologists' manual measurements (Pearson correlation coefficients between 0.47 and 0.99 and intraclass correlation coefficients between 0.46 and 0.98). This method provides more accurate measurements than the conventional 2D x-ray-based measurement method, reducing the error of acetabular cup size from over 2 mm to less than 1 mm. Moreover, our morphometry measurement method is robust against the error of the previous bone segmentation step. As we tested different deep learning methods for the prerequisite bone segmentation, our method produced consistent final measurement results, with only a 0.37 mm maximum inter-method difference in the cup size.Significance. This study proposes a deep learning approach with improved robustness and accuracy for pelvis arthroplasty planning.

Tunable biocomposite films fabricated using cellulose nanocrystals and additives for food packaging.

Cellulose nanocrystals (CNCs) are considered a prospective packaging material to partially replace petroleum-based plastics attributed to their renewability, sustainability, biodegradability, and desirable attributes including transparency, oxygen, and oil barrier properties. However, neat CNC films are rigid and too brittle to handle or utilize for packaging applications. Hence different additives, including sorbitol, polyvinyl alcohol (PVA), chitin, and κ-carrageenan (CG) were selected to mix with CNCs for packaging film preparation. The influence of additive categories (plasticizer, nonionic polymer, weak cationic and anionic natural polysaccharide), and their concentrations on the performance of CNC suspensions as well as optical, barrier, mechanical, and thermal properties of CNC films were examined. The morphology and physical characterization including density, equilibrium moisture content, contact angle and water durability of the composite films were also determined. Sorbitol and PVA films had the best visible light transparency; mixing with chitin can effectively improve the water durability of CNC films, and CG changed the CNC film from hydrophilic to hydrophobic. Moreover, all CNC films exhibited sufficient oxygen barrier properties, high PVA content films attained the "very high" barrier grade. Thus, durable CNC films can be obtained by adding proper types and amounts of additives, which provides potential scenarios for practical application of CNC films in food packaging.

Unbiased multitissue transcriptomic analysis reveals complex neuroendocrine regulatory networks mediated by spinal cord injury-induced immunodeficiency.

BACKGROUND: Spinal cord injury (SCI), which causes loss of sensory and motor function in the body below the level of injury, is a devastating disease of the central nervous system. SCI leads to severe secondary immunosuppression, called SCI-induced immunodeficiency syndrome (SCI-IDS), which is characterized by increased susceptibility to infection and further exacerbates neurological dysfunction. Several studies have suggested that SCI-IDS is an independent risk factor for poor neurological prognosis. SCI-IDS predominantly occurs following injury above the T5 levels and eventually leads to systemic immune failure, possibly via the sympathetic-adrenal medullary axis and the hypothalamic‒pituitary‒adrenal (HPA) axis. However, the mechanism remains unclear. METHODS AND OBJECTIVES: The concentrations of adrenocorticotropic hormone and cortisol in plasma, as well as changes in sympathetic activity (blood pressure and catecholamine levels in plasma), were assessed in rats in the high-level (T3) spinal cord injury (T3-SCI) group and the low-level (T10) spinal cord injury (T10-SCI) group. Second, the differential regulation of the gene network between the sympathetic-adrenal medullary axis and the HPA axis was explored by histology and multitissue transcriptomics, and the neuroendocrine-immune network associated with SCI-IDS was further elucidated. RESULTS: The spleen and thymus gland, which are secondary immune organs, were significantly atrophied in rats in the T3-SCI group, and the white pulp of the spleen was significantly atrophied. The level of cortisol, which is mediated by the adrenal glands, was markedly elevated, but norepinephrine levels were markedly decreased. There was no difference in adrenocorticotropic hormone expression between any of the groups. The transcriptome analysis results showed that the downregulated differentially expressed genes (DEGs) in the T3-SCI group were enriched in the GO term immunoregulation, indicating that splenic immune function was markedly impaired after high-level SCI. The upregulated DEGs in the hypothalamus (hub genes: Nod2, Serpine1, Cebpb, Nfkbil1, Ripk2, Zfp36, Traf6, Akap8, Gfer, Cxcl10, Tnfaip3, Icam1, Fcgr2b, Ager, Dusp10, and Mapkapk2) were significantly enriched in inflammatory pathways, and the downregulated genes (hub genes: Grm4, Nmu, P2ry12, rt1-bb1, Oprm1, Zfhx2, Gpr83, and Chrm2) were enriched in pathways related to inhibitory Gi-mediated G protein-coupled receptor (Gi-GPCR) neurons and neuropeptide changes. The upregulated genes in the adrenal glands (hub genes: Ciart, per2, per3, cry1, and cry2) were enriched in cortisol secretion and circadian rhythm changes, and the downregulated genes (hub genes: IL7r, rt1-bb, rt1-bb1, rt1-da, rt1-ba, cd74, cxcr3, vcam1, ccl5, bin1, and IL8) were significantly enriched in MHC-mediated immune responses. CONCLUSIONS: To explore the possible mechanism underlying SCI-IDS, this study assessed the differential regulation of the gene network associated with neuroendocrine immunity after SCI. Progressive neuroinflammation spreads after injury, and neurotransmission through Gi-mediated G protein-coupled receptors in the HPA axis and neuropeptide production by the hypothalamus are inhibited. Disruption of the connection between the hypothalamus and the adrenal glands causes autonomous regulation of the adrenal glands, disturbance of circadian rhythm and finally hypercortisolemia, leading to general suppression of peripheral adaptive immunity. Neuraxial nerve inflammation caused by SCI persists indefinitely, blocking nerve repair; persistent system-wide immunosuppression in the periphery results in increased susceptibility to infection, leading to poor neurological prognosis.

Construction and validation of a novel cuproptosis-mitochondrion prognostic model related with tumor immunity in osteosarcoma.

BACKGROUND: The purpose of this study was to develop a new prognostic model for osteosarcoma based on cuproptosis-mitochondrion genes. MATERIALS AND METHODS: The data of osteosarcoma were obtained from TARGET database. By using Cox regression and LASSO regression analysis, a novel risk score was constructed based on cuproptosis-mitochondrion genes. Kaplan-Meier, ROC curve and independent prognostic analyses were performed to validate the risk score in GSE21257 dataset. Then, a predictive nomogram was constructed and further validated by calibration plot, C-index and ROC curve. Based on the risk score, all patients were divided into high-risk and low-risk group. GO and KEGG enrichment, immune correlation and drug sensitivity analyses were performed between groups. Real-time quantitative PCR verified the expression of cuproptosis-mitochondrion prognostic model genes in osteosarcoma. And we explored the function of FDX1 in osteosarcoma by western blotting, CCK8, colony formation assay, wound healing assay and transwell assays. RESULTS: A total of six cuproptosis-mitochondrion genes (FDX1, COX11, MFN2, TOMM20, NDUFB9 and ATP6V1E1) were identified. A novel risk score and associated prognostic nomogram were constructed with high clinical application value. Strong differences in function enrichment and tumor immune microenvironment were shown between groups. Besides, the correlation of cuproptosis-mitochondrion genes and drug sensitivity were revealed to search for potential therapeutic target. The expression of FDX1, COX11, MFN2, TOMM20 and NDUFB9 at mRNA level was elevated in osteosarcoma cells compared with normal osteoblast hFOB1.19. The mRNA expression level of ATP6V1E1 was decreased in osteosarcoma. Compared with hFOB1.19, western blotting revealed that the expression of FDX1 was significantly elevated in osteosarcoma cells. Functional experiments indicated that FDX1 mainly promoted the migration of osteosarcoma rather than proliferation. CONCLUSIONS: We developed a novel prognostic model of osteosarcoma based on cuproptosis-mitochondrion genes, which provided great guidance in survival prediction and individualized treatment decision making for patients with osteosarcoma.

Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration.

Mesoporous bioglass (MBG) with excellent osteointegration, osteoinduction, and biodegradability is a promising material for bone regeneration. However, its clinical application is hindered by complex processing and a lack of personalization, low mechanical strength, and uncontrollable degradation rate. In this study, we developed a double-bond-functionalized photocurable mesoporous bioglass (PMBG) sol that enabled ultrafast photopolymerization within 5 s. By further integrating nanosized tricalcium phosphate (TCP) particles through three-dimensional (3D) printing technology, we fabricated personalized and highly porous PMBG/TCP biphasic scaffolds. The mechanical properties and degradation behavior of the scaffolds were regulated by varying the amount of TCP doping. In vitro and in vivo experiments verified that PMBG/TCP scaffolds slowly released SiO44- and Ca2+, forming a vascularized bone regeneration microenvironment within the fully interconnected pore channels of the scaffold. This microenvironment promoted angiogenesis and accelerated bone tissue regeneration. Overall, this work demonstrates the solution to the problem of complex processing and lack of personalization in bioglass scaffolds, and the developed PMBG/TCP biphasic scaffold is an ideal material for bone regeneration applications with broad clinical prospects.

Swelling compensation of engineered vasculature fabricated by additive manufacturing and sacrifice-based technique using thermoresponsive hydrogel.

Engineered vasculature is widely employed to maintain the cell viability within in vitro tissues. A variety of fabrication techniques for engineered vasculature have been explored, with combination of additive manufacturing with a sacrifice-based technique being the most common approach. However, the size deformation of vasculature caused by the swelling of sacrificial materials remains unaddressed. In this study, Pluronic F-127 (PF-127), the most widely used sacrificial material, was employed to study the deformation of the vasculature. Then, a thermoresponsive hydrogel comprising poly(N-isopropylacrylamide) (PNIPAM) and gelatin methacrylate (GelMA) was used to induce volume shrinkage at 37°C to compensate for the deformation of vasculature caused by the swelling of a three-dimensional (3D)-printed sacrificial template, and to generate vasculature of a smaller size than that after deformation. Our results showed that the vasculature diameter increased after the sacrificial template was removed, whereas it decreased to the designed diameter after the volume shrinkage. Human umbilical vein endothelial cells (HUVECs) formed an endothelial monolayer in the engineered vasculature. Osteosarcoma cells (OCs) were loaded into a hierarchical vasculature within the thermoresponsive hydrogel to investigate the interaction between HUVECs and OCs. New blood vessel infiltration was observed within the lumen of the engineered vasculature after in vivo subcutaneous implantation for 4 weeks. In addition, engineered vasculature was implanted in a rat ischemia model to further study the function of engineered vasculature for blood vessel infiltration. This study presents a small method aiming to accurately create engineered vasculature by additive manufacturing and a sacrificebased technique.

Potentially migrating and residual components of biochar: Effects on phosphorus adsorption performance and storage capacity of black soil.

Biochar has great potential to increase the soil nutrient storage capacity. However, with aging, biochar gradually disintegrates and releases fractions with migration potential, resulting in unknown effects on soil nutrient regulation. Based on this problem, we used ultrasound to separate original biochar (TB) into potentially migrating biochar (DB) and residual biochar (RB). The elemental composition and pore characteristics of TB, DB and RB were analyzed. Different fractions of biochar were applied to black soil, and the kinetic model and isothermal adsorption models were used to explore the adsorption characteristics of different treatments. Then, the effects of initial pH and coexisting ions on adsorption were compared. The adsorption mechanism and potential leaching process of phosphorus in soil were investigated. The results showed that RB had higher O and H contents and was less stable than TB, while RB was more aromatic. The phosphorus adsorption capacity of different treatments was SRB (1.3318 mg g-1) > STB (1.2873 mg g-1) > SDB (1.3025 mg g-1) > SCK (1.1905 mg g-1). SRB had optimal phosphorus adsorption performance and storage capacity, with a maximum adsorption capacity of 1.6741 mg g-1 for the Langmuir isotherm, and it also showed excellent applicability in a pH gradient and with coexisting ions. The main adsorption mode of phosphorus by different treatments was monolayer chemisorption, related to electrostatic repulsion and oxygen-containing functional groups. DB was less effective in inhibiting soil phosphorus migration, with the cumulative leaching of SDB reaching 8.99 mg and the percentage of phosphorus in the 0-6 cm soil layer reaching only 15.42%. Overall, the results can help elucidate potential trends in the adsorption performance and migration process of soil phosphorus by biochar, and improve the comprehensive utilization efficiency of biochar.

Effects of biochar and freeze‒thaw cycles on the bacterial community and multifunctionality in a cold black soil area.

Global climate change has altered soil freeze‒thaw cycle events, and little is known about soil microbe response to and multifunctionality regarding freeze‒thaw cycles. Therefore, in this study, biochar was used as a material to place under seasonal freeze-thaw cycling conditions. The purpose of this study was to explore the ability of biochar to regulate the function of freeze-thaw soil cycles to ensure spring sowing and food production. The results showed that biochar significantly increased the richness and diversity of soil bacteria before and after freezing-thawing. In the freezing period, the B50 treatment had the greatest improvement effect (2.6% and 5.5%, respectively), while in the thawing period, the B75 treatment had the best improvement effect. Biochar changed the composition and distribution characteristics of the bacterial structure and enhanced the multifunctionality of freeze-thaw soil and the stability of the bacterial symbiotic network. Compared with the CK treatment, the topological characteristics of the bacterial ecological network of the B50 treatment increased the most. They were 0.89 (Avg.degree), 9.79 (Modularity), 9 (Nodes), and 255 (Links). The freeze-thaw cycle decreased the richness and diversity of the bacterial community and changed the composition and distribution of the bacterial community, and the total bacterial population decreased by 658 (CK), 394 (B25), 644 (B50) and 86 (B75) during the thawing period compared with the freezing period. The soil multifunctionality in the freezing period was higher than that during the thawing period, indicating that the freeze-thaw cycle reduced soil ecological function. From the perspective of abiotic analysis, the decrease in soil multifunctionality was due to the decrease in soil nutrients, enzyme activities, soil basic respiration and other singular functions. From the perspective of bacteria, the decrease in soil multifunctionality was mainly due to the change in the Actinobacteriota group. This work expands the understanding of biochar ecology in cold black soil. These results are conducive to the sustainable development of soil ecological function in cold regions and ultimately ensure crop growth and food productivity.

Photocurable 3D-Printed PMBG/TCP Scaffold Coordinated with PTH (1-34) Bidirectionally Regulates Bone Homeostasis to Accelerate Bone Regeneration.

Bone defect repair remains a major clinical challenge that requires the construction of scaffolds that can regulate bone homeostasis. In this study, a photo-cured mesoporous bioactive glass (PMBG) precursor is developed as a tricalcium phosphate (TCP) agglomerant to obtain a double-phase PMBG/TCP scaffold via 3D printing. The scaffold exhibits multi-scale porous structures and large surface areas, making it a suitable carrier for the loading of parathyroid hormone (PTH) (1-34), which is used for the treatment of osteoporosis. In vitro and in vivo results demonstrate that PMBG/TCP scaffolds coordinated with PTH (1-34) can regulate bone homeostasis in a bidirectional manner to facilitate bone formation and inhibit bone resorption. Furthermore, bidirectional regulation of bone homeostasis by PTH (1-34) is achieved by inhibiting fibrogenic activation protein (FAP). Thus, PMBG/TCP scaffolds coordinated with PTH (1-34) are viable materials with considerable potential for application in the field of bone regeneration and provide an excellent solution for the design and development of clinical materials.