Ethanol-type anaerobic digestion enhanced methanogenic performance by stimulating direct interspecies electron transfer and interspecies hydrogen transfer.

Ethanol pre-fermentation of food waste effectively alleviates acidification; however, its effects on interspecies electron transfer remain unknown. This study configured the feed according to COD ratios of ethanol: sodium acetate: sodium propionate: sodium butyrate of 5:2:1.5:1.5 (ethanol-type anaerobic digestion) and 0:5:2.5:2.5 (control), and conducted semi-continuous anaerobic digestion (AD) experiments. The results showed that ethanol-type AD increased maximum tolerable organic loading rate (OLR) to 6.0 gCOD/L/d, and increased the methane production by 1.2-14.8 times compared to the control at OLRs of 1.0-5.0 gCOD/L/d. The abundance of the pilA gene, which was associated with direct interspecies electron transfer (DIET), increased by 5.6 times during ethanol-type AD. Hydrogenase genes related to interspecies hydrogen transfer (IHT), including hydA-B, hoxH-Y, hnd, ech, and ehb, were upregulated during ethanol-type AD. Ethanol-type AD improved methanogenic performance and enhanced microbial metabolism by stimulating DIET and IHT.

Explainable machine learning-driven predictive performance and process parameter optimization for caproic acid production.

In this study, four machine learning (ML) prediction models were developed to predict and optimize the production performance of caproic acid based on substrates, products, and process parameters. The XGBoost outperformed others, with a high R2 of 0.998 on the training set and 0.885 on the test set. Feature importance analysis revealed hydraulic retention time (HRT) and butyric acid concentration are decisive. The SHAP method offered profound insights into the interplay and cumulative effects of substrate composition, identified the synergistic effects between butyric acid and lactic acid, and emphasized adding glucose can benefit caproic with lactic acid co-fermentation. By integrating the Adaptive Variation Particle Swarm Optimization (AVPSO) algorithm, the optimal process conditions to achieve a maximum caproic acid production of 8.64 g/L was obtained. This study not only advances caproic acid production but contributes a versatile ML-driven strategy applicable to bioprocess optimizations, potentially transformative for sustainable and economically viable bioproduction.

Advancements in medium chain fatty acids production through chain elongation: Key mechanisms and innovative solutions for overcoming rate-limiting steps.

The depletion of fossil fuels has prompted an urgent search for alternative chemicals from renewable sources. Current technology in medium chain fatty acids (MCFAs) production though chain elongation (CE) is becoming increasingly sustainable, hence the motivation for this review, which provides the detailed description, insights and analysis of the metabolic pathways, substrates type, inoculum and fermentation process. The main rate-limiting steps of microbial MCFAs production were comprehensively revealed and the corresponding innovative solutions were also critically evaluated. Innovative strategies such as substrate pretreatment, electrochemical regulation, product separation, fermentation parameter optimization, and electroactive additives have shown significant advantages in overcoming the rate-limiting steps. Furthermore, novel regulatory strategies such as quorum sensing and electronic bifurcation are expected to further increase the MCFAs yield. Finally, the techno-economic analysis was carried out, and the future research focuses were also put forward.

Turning food waste to microbial lipid towards a superb economic and environmental sustainability: An innovative integrated biological route.

With the drastic growth of the economic and population, the global energy requirement is on the rise, and massive human and material resources have been put into the development of alternative and renewable energy sources. Biodiesel has been recognized as a green and sustainable alternative energy, but the raw materials-associated source and cost makes it difficult to achieve large-scale commercial production. Microbial lipids (ML) produced by oleaginous microbes have attracted more and more topics as feedstocks for biodiesel production because of their unique advantages (fast growth cycle, small footprint and so on). However, there are still many problems and challenges ahead towards commercialization of ML-based biodiesel, especially the cost of feedstock for ML production. Food waste (FW) rich in organic matters and nutrients is an excellent and almost zero-cost feedstock for ML production. However, current biological routes of FW-based ML production have some defects, which make it impossible to achieve full industrialization at present. Therefore, this review intends to provide a critical and comprehensive analysis of current biological routes of FW-based ML production with the focus on the challenges and solutions forward. The biological routes towards future FW-based ML production must be able to concurrently achieve economic feasibility and environmental sustainability. On this condition, an innovative integrated biological route for FW-based ML production has thus been put forward, which is also elucidated on its economic and environmental sustainability. Moreover, the prospective advantages, limitations and challenges for future scale-up of FW-based ML production have also been outlined, together with the perspectives and directions forward.

Exploring the maximum nitrite production rate through the granular sludge-type reactor to match the needs of anammox process realizing efficient nitrogen removal.

The reliable and efficient nitrite production rate (NPR) through nitritation process is the prerequisite for the efficient running of subsequent processes, like the anammox process and the nitrite shunt. However, there has been scant research on stable and productive nitritation process in recent years. In this study, at a stable hydraulic retention time of 12.0 h and with precise and strict DO control, the upper limit of the NPR was initially investigated using a continuous-flow granular sludge reactor. The NPR of 1.69 kg/m3/d with a nitrite production efficiency of 81.97% was finally achieved, which set a record until now in similar research. The median sludge particle size of 270.0 µm confirmed the development of clearly defined granular sludge. The genus Nitrosomonas was the major ammonium oxidizing bacteria. In conclusion, this study provides valuable insights for the practical application of the effective nitritation process driving subsequent nitrogen removal processes.

Easily applicable predictive score for MPR based on parameters before neoadjuvant chemoimmunotherapy in operable NSCLC: a single-center, ambispective, observational study.

BACKGROUND: Neoadjuvant chemoimmunotherapy (NACI) is promising for resectable nonsmall cell lung cancer (NSCLC), but predictive biomarkers are still lacking. The authors aimed to develop a model based on pretreatment parameters to predict major pathological response (MPR) for such an approach. METHODS: The authors enrolled operable NSCLC treated with NACI between March 2020 and May 2023 and then collected baseline clinical-pathology data and routine laboratory examinations before treatment. The efficacy and safety data of this cohort was reported and variables were screened by Logistic and Lasso regression and nomogram was developed. In addition, receiver operating characteristic curves, calibration curves, and decision curve analysis were used to assess its power. Finally, internal cross-validation and external validation was performed to assess the power of the model. RESULTS: In total, 206 eligible patients were recruited in this study and 53.4% (110/206) patients achieved MPR. Using multivariate analysis, the predictive model was constructed by seven variables, prothrombin time (PT), neutrophil percentage (NEUT%), large platelet ratio (P-LCR), eosinophil percentage (EOS%), smoking, pathological type, and programmed death ligand-1 (PD-L1) expression finally. The model had good discrimination, with area under the receiver operating characteristic curve (AUC) of 0.775, 0.746, and 0.835 for all datasets, cross-validation, and external validation, respectively. The calibration curves showed good consistency, and decision curve analysis indicated its potential value in clinical practice. CONCLUSION: This real world study revealed favorable efficacy in operable NSCLC treated with NACI. The proposed model based on multiple clinically accessible parameters could effectively predict MPR probability and could be a powerful tool in personalized medication.

Stabilization of heavy metals in municipal solid waste incineration fly ash using organic chelating agents: Insight into risk assessment and function mechanism.

Landfill treatment of municipal solid waste incineration fly ash (MSWI FA) after stabilization is the primary disposal technology. However, only few studies have assessed the stability of MSWI-FA-chelated products in different landfill scenarios. In this study, three commonly used dithiocarbamate (DTC)-based organic chelating agents (CAs) (TS-300, SDD, and PD) were selected to stabilize heavy metals (HMs) in MSWI FA. In addition, the leaching toxicity and environmental risks of the chelated products were assessed in different disposal environments. The results demonstrate that the HM leaching concentrations of the chelated products met the concentration limits of the sanitary landfill standard (GB16889-2008; mixed Landfill Scenario) for the three CAs at a low additive level (0.3 %). However, in the compartmentalized landfill scenario (the leaching agent was acid rain), the leaching of HMs from the chelated products met the standard when TS-300, SDD, and PD were added at 1.5 %, 6.0 %, and 8.0 %, respectively. Additionally, Pb, Zn, and Cd in the chelated products from the 1.5 %-TS-300 and 6.0 %-SDD groups met the leaching limits within the pH ranges 6-12 and 7-12, 6-12 and 7-12, and 8-12 and 8-12, respectively. This was primarily due of TS-300's multiple DTC groups forming stable chain-like macromolecular chelates with Pb. However, although the environmental risks associated with Pb, Zn, and Cd in the initial (0-d) chelated products of the 1.5 %-TS-300 and 6.0 %-SDD groups were minimized to low and negligible levels, there was a significant increase in the leaching of the three HMs after 28 d of storage. Therefore, with appropriate CA addition, although the leaching concentration of HMs in the chelated product may comply with the GB16889-2008 standards, it remains essential to consider its environmental risk, particularly in highly acidic or alkaline environments and during prolonged storage of the product.

Electrochemical promotion of organic waste fermentation: Research advances and prospects.

The current methods of treating organic waste suffer from limited resource usage and low product value. Research and development of value-added products emerges as an unavoidable trend for future growth. Electro-fermentation (EF) is a technique employed to stimulate cell proliferation, expedite microbial metabolism, and enhance the production of value-added products by administering minute voltages or currents in the fermentation system. This method represents a novel research direction lying at the crossroads of electrochemistry and biology. This article documents the current progress of EF for a range of value-added products, including gaseous fuels, organic acids, and other organics. It also presents novel value-added products, such as 1,3-propanediol, 3-hydroxypropionic acid, succinic acid, acrylic acid, and lysine. The latest research trends suggest a focus on EF for cogeneration of value-added products, studying microbial community structure and electroactive bacteria, exploring electron transfer mechanisms in EF systems, developing effective methods for nutrient recovery of nitrogen and phosphorus, optimizing EF conditions, and utilizing biosensors and artificial neural networks in this area. In this paper, an analysis is conducted on the challenges that currently exist regarding the selection of conductive materials, optimization of electrode materials, and development of bioelectrochemical system (BES) coupling processes in EF systems. The aim is to provide a reference for the development of more efficient, advanced, and value-added EF technologies. Overall, this paper aims to provide references and ideas for the development of more efficient and advanced EF technology.

Whether biorefinery is a promising way to support waste source separation? From the life cycle perspective.

Since the implementation of the waste separation policy, the disposal of source-separated food waste (FW) has been more strictly required. Traditional source-separated FW treatment technologies, such as anaerobic digestion (AD) and aerobic composting (AC), suffer from low resource utilization efficiency and poor economic benefits. It is one of the main limiting factors for the promotion of waste separation. Life cycle assessment (LCA) was conducted for five municipal solid waste (MSW) treatment technologies, compared their environmental impacts, and analyzed the impact of waste separation ratios to determine whether biorefinery is a promising way to support waste source separation. The results showed that black soldier fly (BSF) treatment had the lowest net global warming potential (GWP) of all technologies, reduced by 40.8 % relative to the non-source-separated treatment. Ethanol production had the second-lowest net environmental impact potential because bioethanol replaces fossil fuel to avoid the emission of pollutants from its combustion. When two biorefinery technologies with excellent efficiency to avoid environmental impact are used to treat source-separated FW, the increase in the percentage of waste separation will help reduce the environmental impact of MSW treatment. The application of biorefinery technologies is considered a viable option for source-separated FW treatment. AC should not be widely promoted because it showed the worst net environmental benefits, and waste separation will elevate the environmental impact of its treatment process.

The stable operation of nitritation process with the continuous granular sludge-type reactor and microbial community analysis.

The nitritation step is the fundament for the biological nitrogen removal regardless of the traditional nitrification and denitrification process, the nitrite shunt process or the anammox process. Thus, exploring the effective nitritation performance is an important aspect of biological nitrogen removal. This study explored the upper limit of nitritation rate by increasing hydraulic residence time with the well-mixed and continuous granular sludge-type reactor characterized with low complexity and easy operation. The results showed that with the nitrogen loading rate of 1.0 kg/m3/d, the nitrite production rate could reach up to 0.65 kg/m3/d with the nitrite production efficiency of 63.49%, which is remarkable compared to that in the previously similar research. The microbial analysis indicated that ammonia-oxidizing bacteria was successfully enriched (13.27%) and genus Nitrosomonas was the dominant bacteria type. Besides, the activity of ammonium oxidizing bacteria in the continuous flow reactor was higher than that of other reactor types. The growth of vorticella on the sludge was also found in the reactor. The test of specific sludge activity and the microbe analysis both indicated that the nitrite-oxidizing bacteria was well inhibited during the whole experiment, which indicated the strategy of simply adjusting the dissolved oxygen is effective for running of nitritation process. The phosphorus removal performance was also achieved with a removal efficiency of 23.53%. The functional composition of the microbial community in the samples was predicted and finally transformation mechanism of nitrogen in sludge was drawn. In sum, this study indicated the superior performance of the granule sludge-type nitritation process and give a reference for the application of biological nitrogen removal technology.

Mutation status analysis of 58 patients with advanced ALK fusion gene positive non small cell lung cancer.

PURPOSE: To analyze the characteristics and prognostic values of Anaplastic Lymphoma Kinase (ALK) fusion gene partner, gene subtype and abundance in tumor tissues of advanced Non Small Cell Lung Cancer (NSCLC) patients with positive ALK fusion gene and to explore the best treatment mode of ALK-Tyrosine Kinase Inhibitors(TKIs). METHODS: Cases of advanced NSCLC patients with ALK positive confirmed by both Next Generation Sequencing (NGS) and immunohistochemistry were retrospectively collected. The relationships of Overall Survival (OS)/Progression Free Survival (PFS) between different mutation subtypes, mutation abundance, clinicopathological features were analyzed. OS/PFS between different treatment mode of ALK inhibitors were compared. RESULTS: Fifty-eight patients were enrolled. There were diverse fusion partners. Five subtypes of Echinoderm Microtubule-associated protein-Like 4 gene (EML4)-ALK fusion mutation were detected: V1,V2,V3,V5 and V7. The mutation abundance ranged from 0.13 to 27.77%, with a median of 5.34%. The abundance of V2 and V5 was higher than V1 and V3 respectively. There was no difference in OS between the low abundance group(≤ 5.34%) and the high abundance group(>5.34%) (P = 0.434). PFS of second-generation ALK inhibitors as first-line treatment was longer than that of Crizotinib as first-line (P<0.001). Never smokers had longer OS than current smokers(P = 0.001). CONCLUSIONS: There are differences in abundance between different fusion partners and subtypes in advanced NSCLC with positive ALK. OS is not associated with subtypes, mutation abundance and first line treatment option of either generation of ALK inhibitors. Smoking is a poor prognostic factor.

Identification of hub genes and key signaling pathways by weighted gene co-expression network analysis for human aortic stenosis and insufficiency.

Background: Human aortic valve stenosis (AS) and insufficiency (AI) are common diseases in aging population. Identifying the molecular regulatory networks of AS and AI is expected to offer novel perspectives for AS and AI treatment. Methods: Highly correlated modules with the progression of AS and AI were identified by weighted genes co-expression network analysis (WGCNA). Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses were performed by the clusterProfiler program package. Differentially expressed genes (DEGs) were identified by the DESeqDataSetFromMatrix function of the DESeq2 program package. The protein-protein interaction (PPI) network analyses were implemented using the STRING online tool and visualized with Cytoscape software. The DEGs in AS and AI groups were overlapped with the top 30 genes with highest connectivity to screen out ten hub genes. The ten hub genes were verified by analyzing the data in high throughput RNA-sequencing dataset and real-time PCR assay using AS and AI aortic valve samples. Results: By WGCNA algorithm, 302 highly correlated genes with the degree of AS, degree of AI, and heart failure were identified from highly correlated modules. GO analyses showed that highly correlated genes had close relationship with collagen fibril organization, extracellular matrix organization and extracellular structure organization. KEGG analyses also manifested that protein digestion and absorption, and glutathione metabolism were probably involved in AS and AI pathological courses. Moreover, DEGs were picked out for 302 highly correlated genes in AS and AI groups relative to the normal control group. The PPI network analyses indicated the connectivity among these highly correlated genes. Finally, ten hub genes (CD74, COL1A1, TXNRD1, CCND1, COL5A1, SERPINH1, BCL6, ITGA10, FOS, and JUNB) in AS and AI were found out and verified. Conclusion: Our study may provide the underlying molecular targets for the mechanism research, diagnosis, and treatment of AS and AI in the future.

Histone acetyltransferase P300 deficiency promotes ferroptosis of vascular smooth muscle cells by activating the HIF-1α/HMOX1 axis.

BACKGROUND: E1A-associated 300-kDa protein (P300), an endogenous histone acetyltransferase, contributes to modifications of the chromatin landscape of genes involved in multiple cardiovascular diseases. Ferroptosis of vascular smooth muscle cells (VSMCs) is a novel pathological mechanism of aortic dissection. However, whether P300 regulates VSMC ferroptosis remains unknown. METHODS: Cystine deprivation (CD) and imidazole ketone erastin (IKE) were used to induce VSMC ferroptosis. Two different knockdown plasmids targeting P300 and A-485 (a specific inhibitor of P300) were used to investigate the function of P300 in the ferroptosis of human aortic smooth muscle cells (HASMCs). Cell counting kit-8, lactate dehydrogenase and flow cytometry with propidium iodide staining were performed to assess the cell viability and death under the treatment of CD and IKE. BODIPY-C11 assay, immunofluorescence staining of 4-hydroxynonenal and malondialdehyde assay were conducted to detect the level of lipid peroxidation. Furthermore, co-immunoprecipitation was utilized to explore the interaction between P300 and HIF-1α, HIF-1α and P53. RESULTS: Compared with normal control, the protein level of P300 was significantly decreased in HASMCs treated with CD and IKE, which was largely nullified by the ferroptosis inhibitor ferrostatin-1 but not by the autophagy inhibitor or apoptosis inhibitor. Knockdown of P300 by short-hairpin RNA or inhibition of P300 activity by A-485 promoted CD- and IKE-induced HASMC ferroptosis, as evidenced by a reduction in cell viability and aggravation of lipid peroxidation of HASMCs. Furthermore, we found that hypoxia-inducible factor-1α (HIF-1α)/heme oxygenase 1 (HMOX1) pathway was responsible for the impacts of P300 on ferroptosis of HASMCs. The results of co-immunoprecipitation demonstrated that P300 and P53 competitively bound HIF-1α to regulate the expression of HMOX1. Under normal conditions, P300 interacted with HIF-1α to inhibit HMOX1 expression, while reduced expression of P300 induced by ferroptosis inducers would favor HIF-1α binding to P53 to trigger HMOX1 overexpression. Furthermore, the aggravated effects of P300 knockdown on HASMC ferroptosis were largely nullified by HIF-1α knockdown or the HIF-1α inhibitor BAY87-2243. CONCLUSION: Thus, our results revealed that P300 deficiency or inactivation facilitated CD- and IKE-induced VSMC ferroptosis by activating the HIF-1α/HMOX1 axis, which may contribute to the development of diseases related to VSMC ferroptosis.

A comprehensive review on microbial lipid production from wastes: research updates and tendencies.

Microbial lipids have recently attracted attention as an intriguing alternative for the biodiesel and oleochemical industries to achieve sustainable energy generation. However, large-scale lipid production remains limited due to the high processing costs. As multiple variables affect lipid synthesis, an up-to-date overview that will benefit researchers studying microbial lipids is necessary. In this review, the most studied keywords from bibliometric studies are first reviewed. Based on the results, the hot topics in the field were identified to be associated with microbiology studies that aim to enhance lipid synthesis and reduce production costs, focusing on the biological and metabolic engineering involved. The research updates and tendencies of microbial lipids were then analyzed in depth. In particular, feedstock and associated microbes, as well as feedstock and corresponding products, were analyzed in detail. Strategies for lipid biomass enhancement were also discussed, including feedstock adoption, value-added product synthesis, selection of oleaginous microbes, cultivation mode optimization, and metabolic engineering strategies. Finally, the environmental implications of microbial lipid production and possible research directions were presented.

Improving lactic acid yield of hemicellulose from garden garbage through pretreatment of a high solid loading coupled with semi-hydrolysis using low enzyme loading.

Byproduct (acetate and ethanol) generation and carbon catabolite repression are two critical impediments to lactic acid production from the hemicellulose of lignocellulosic biomass. To reduce byproduct generations, acid pretreatment with high solid loading (solid-liquid ratio 1:7) of garden garbage was conducted. The byproduct yield was only 0.30 g/g during in the subsequent lactic acid fermentation from acid pretreatment liquid and 40.8% lower than that of low solid loading (0.48 g/g). Furthermore, semi-hydrolysis with low enzyme loading (10 FPU/g garden garbage cellulase) was conducted to regulate and reduce glucose concentration in the hydrolysate, thereby relieving carbon catabolite repression. During the lactic acid fermentation process, the xylose conversion rate was restored from 48.2% (glucose-oriented hydrolysis) to 85.7%, eventually achieving a 0.49 g/g lactic acid yield of hemicellulose. Additionally, RNA-seq revealed that semi-hydrolysis with low enzyme loading down-regulated the expression of ptsH and ccpA, thereby relieving carbon catabolite repression.

Anaerobic fermentation of organic solid waste: Recent updates in substrates, products, and the process with multiple products co-production.

The effective conversion and recycling of organic solid waste contribute to the resolution of widespread issues such as global environmental pollution, energy scarcity and resource depletion. The anaerobic fermentation technology provides for the effective treatment of organic solid waste and the generation of various products. The analysis, which is based on bibliometrics, concentrates on the valorisation of affordable and easily accessible raw materials with high organic matter content as well as the production of clean energy substances and high value-added platform products. The processing and application status of fermentation raw materials such as waste activated sludge, food waste, microalgae and crude glycerol are investigated. To analyse the status of the preparation and engineering applications of the products, the fermentation products biohydrogen, VFAs, biogas, ethanol, succinic acid, lactic acid, and butanol are employed as representatives. Simultaneously, the anaerobic biorefinery process with multiple product co-production is sorted out. Product co-production can reduce waste discharge, enhance resource recovery efficiency, and serve as a model for improving anaerobic fermentation economics.

Effect of biodrying of lignocellulosic biomass on humification and microbial diversity.

By optimizing the carbon to nitrogen (C/N) ratio, this study accomplished an improved level of humification and microbial diversity in the biodrying process of lignocellulosic biomass. The results demonstrated that C/N ratio of 20 accelerated the decomposition of refractory lignocellulose, resulting in lower greenhouse gas emissions and the production of highly mature fertilizer with a germination index of 119.0% and a humic index of 3.2. Moreover, C/N ratio of 20 was found to diversify microbial communities, including Pseudogracilibacillus, Sinibacillus, and Georgenia, which contributed to the decomposition of lignocellulosic biomass and the production of humic acid. Hence, it is recommended to regulate the C/N ratio to 20:1 during the biodrying of biogas residue and wood chips to promote the economic feasibility and bioresource recycling.

BRD4770 inhibits vascular smooth muscle cell proliferation via SUV39H2, but not EHMT2 to protect against neointima formation.

The behavior of vascular smooth muscle cells (VSMCs) contributes to the formation of neointima. We previously found that EHMT2 suppressed autophagy activation in VSMCs. BRD4770, an inhibitor of EHMT2/G9a, plays a critical role in several kinds of cancers. However, whether and how BRD4770 regulates the behavior of VSMCs remain unknown. In this study, we evaluate the cellular effect of BRD4770 on VSMCs by series of experiments in vivo and ex vivo. We demonstrated that BRD4770 inhibited VSMCs' growth by blockage in G2/M phase in VSMCs. Moreover, our results demonstrated that the inhibition of proliferation was independent on autophagy or EHMT2 suppression which we previous reported. Mechanistically, BRD4770 exhibited an off-target effect from EHMT2 and our further study reveal that the proliferation inhibitory effect by BRD4770 was associated with suppressing on SUV39H2/KTM1B. In vivo, BRD4770 was also verified to rescue VIH. Thus, BRD4770 function as a crucial negative regulator of VSMC proliferation via SUV39H2 and G2/M cell cycle arrest and BRD4770 could be a molecule for the therapy of vascular restenosis.

A review on three-dimensional electrochemical technology for the antibiotic wastewater treatment.

The potential genotoxicity and non-biodegradability of antibiotics in the natural water bodies threaten the survival of various living things and cause serious environmental pollution and destruction. Three-dimensional (3D) electrochemical technology is considered a powerful means for antibiotic wastewater treatment as it can degrade non-biodegradable organic substances into non-toxic or harmless substances and even completely mineralize them under the action of electric current. Therefore, antibiotic wastewater treatment using 3D electrochemical technology has now become a hot research topic. Thus, in this review, a detailed and comprehensive investigation was conducted on the antibiotic wastewater treatment using 3D electrochemical technology, including the structure of the reactor, electrode materials, the influence of operating parameters, reaction mechanism, and combination with other technologies. Many studies have shown that the materials of electrode, especially particle electrode, have a great effect on the antibiotic wastewater treatment efficiency. The influence of operating parameters such as cell voltage, solution pH, and electrolyte concentration was very significant. Combination with other technologies such as membrane and biological technologies has effectively increased antibiotic removal and mineralization efficiency. In conclusion, the 3D electrochemical technology is considered as a promising technology for the antibiotic wastewater treatment. Finally, the possible research directions of the 3D electrochemical technology for antibiotic wastewater treatment were proposed.

Solidification/stabilization and risk assessment of heavy metals in municipal solid waste incineration fly ash: A review.

Incineration is currently the most common method of treating municipal solid waste. Municipal solid waste incineration fly ash (MSWI FA) contains a high concentration of toxic heavy metals (HMs), making it a hazardous waste. A series of detoxification treatments are required to reduce the toxicity of fly ash. Furthermore, the environmental risk of MSWI FA after treatment is becoming a cause of concern. This paper reviews the primary ash properties, pH, liquid-solid ratio, and other factors (microorganism, type of leaching agents, etc.) that affect the leaching of HMs from MSWI FA, compares and summarizes the most widely applied solidification/stabilization (S/S) techniques. In particular, models and methods for the environmental risk assessment and prediction of HMs are classified and described in detail. Finally, the inadequacy of current S/S techniques for MSWI FA is pointed out, which may be useful for upcoming studies on this topic.