ABSTRACT
By synergistically employing four key strategies: (I)â introducing tetraphenylethylene groups as the central core unit with aggregation-induced emission (AIE) properties, (II)â optimizing the π-conjugated length by extending the building block branches, (III)â incorporating flexible groups containing ethylenic bonds, and (IV)â applying crystal engineering to attain dense stacking mode and highly twisty conformation, we successfully synthesized a series of hydrogen-bonded organic frameworks (HOFs) exhibiting exceptional one/two-photon excited fluorescence. Notably, when utilizing the fluorescently superior building block L2, HOF-LIFM-7 and HOF-LIFM-8 exhibiting high quantum yields (QY) of 82.1 % and 77.1 %, and ultrahigh two-photon absorption (TPA) cross-sections of 148959.5â GM and 123901.1â GM were achieved. These materials were successfully employed in one and two-photon excited lysosome-targeting cellular imaging. It is believed that this strategy, combining building block optimization and crystal engineering, holds significant potential for guiding the development of outstanding fluorescent HOF materials.
ABSTRACT
A rational molecular design strategy is introduced for selective metal-ligand coordination, enabling the quantitative self-assembly of heterobimetallic nano-Saturn complexes. During the sequential multicomponent self-assembly, the CdII ions and organometallic trans-PtII motifs demonstrate preferential binding to specific ligands. The pre-designed directive interactions allow for precise control over the structural characteristics.
ABSTRACT
The multiple metastable excited states provided by excited-state intramolecular proton transfer (ESIPT) molecules are beneficial to bring temperature-dependent and color-tunable long persistent luminescence (LPL). Meanwhile, ESIPT molecules are intrinsically suitable to be modulated as D-π-A structure to obtain both one/two-photon excitation and LPL emission simultaneously. Herein, we report the rational design of a dynamic CdII coordination polymer (LIFM-106) from ESIPT ligand to achieve the above goals. By comparing LIFM-106 with the counterparts, we established a temperature-regulated competitive relationship between singlet excimer and triplet LPL emission. The optimization of ligand aggregation mode effectively boost the competitiveness of the latter. In result, LIFM-106 shows outstanding one/two-photon excited LPL performance with wide temperature range (100-380â K) and tunable color (green to red). The multichannel radiation process was further elucidated by transient absorption and theoretical calculations, benefiting for the application in anti-counterfeiting systems.
ABSTRACT
BACKGROUND: This study aimed to accurately evaluate the matching of proximal and distal femoral segments and fitting of the femur-femoral stem in patients with Crowe type IV developmental dysplasia of the hip (DDH) who have undergone subtrochanteric osteotomy at different locations with an implanted Wagner cone stem to improve the rate of the bone union at the osteotomy site. METHODS: Three-dimensional femur morphology of 40 patients with Crowe type IV DDH was evaluated at each cross-section to determine the femoral cortical bone area. This study focused on five osteotomy lengths (2.5, 3, 3.5, 4, and 4.5 cm). The overlapped area between the proximal and distal cortical bone segments was defined as the contact area (S, mm2), and the contact area to distal cortical bone area ratio was defined as the coincidence rate (R). Three indicators were used to evaluate the matching and fitting of the osteotomy sites with the implanted Wagner cone stems: (1) higher S and R between the proximal and distal segments; (2) the effective fixation length of the femoral stem at the distal segments being at least 1.5 cm; and (3) osteotomy did not involve the isthmus. RESULTS: In all groups, S significantly decreased in the two proximal levels above the 0.5 cm level below the lesser trochanter (LT) compared with those below this level. In comparison, at osteotomy lengths from 2.5 to 4 cm, R significantly decreased in the three proximal levels. The optimal osteotomy levels ranged from 1.5 and 2.5 cm below the LT for an appropriately sized stem. CONCLUSIONS: Subtrochanteric osteotomy at the optimal level not only ensures fitting of the femur-femoral stem but also meets the requirements of a higher S and R to ensure adequate reduction and stabilization at the osteotomy site, which may contribute to the bone union. Although the optimal osteotomy level varies with the size of the femoral stem and the length of the subtrochanteric osteotomy, the optimal osteotomy levels for an appropriately sized Wagner cone femoral stem implantation range from 1.5 to 2.5 cm below the LT.
Subject(s)
Arthroplasty, Replacement, Hip , Developmental Dysplasia of the Hip , Hip Dislocation, Congenital , Synostosis , Humans , Arthroplasty, Replacement, Hip/methods , Hip Dislocation, Congenital/diagnostic imaging , Hip Dislocation, Congenital/surgery , Developmental Dysplasia of the Hip/surgery , Retrospective Studies , Femur/diagnostic imaging , Femur/surgery , Osteotomy/methods , Synostosis/surgeryABSTRACT
A terpyridine-based supramolecular cage was successfully synthesized by the self-assembly of a hexapodal metal-organic ligand with Zn2+. This metallo-cage exhibited two large parallel planes on the top and bottom with diameters close to 6 nm and a face-to-face distance close to 3.5 nm, thus possessing a large cavity. Electrospray ionization mass spectrometry (ESI-MS), nuclear magnetic resonance (NMR), two-dimensional nuclear Overhauser (2D-NOESY), and diffusion-ordered (DOSY) spectroscopies as well as transmission electron microscopy (TEM) and atomic force microscopy (AFM) measurements, unambiguously supported the formation of a supramolecular cage. Furthermore, the corresponding metal-organic gel was felicitously prepared in CH3CN/H2O and displayed good adsorption performance for dye molecules.
ABSTRACT
OBJECTIVE: To investigate the clinical efficacy of unicompartmental knee arthroplasty (UKA) in the treatment of knee osteoarthritis in patients over 75 years old. METHODS: The clinical efficacy of primary fixed platform UKA in patients with osteoarthritis, was retrospectively analyzed from October 2014 to November 2020. Age, body mass index (BMI), range of motion (ROM), preoperative joint function score, the quality of life score and other preoperative indicators were measured by propensity score matching (PSM). The patients were divided into elderly group (≥75 years old) and control group (<75 years old). Oxford knee score(OKS), Western Ontario McMaster Universities osteoarthritis index(WOMAC), Short Form-12 including physical component summary (PCS), mental component summary(MCS), minimal clinically important difference(MCID ) and clinical complications were evaluated preoperatively and postoperatively. RESULTS: A total of 514 patients were analyzed, 428 patients fulfilled the inclusion criteria. A propensity-score matching study was conducted to eliminate confounding factors. After 1â¶2 propensity match, there were 84 patients in elderly group (≥75 years), age ranged from 75 to 88 years old, with an average of (78.79±3.08) years old, and 168 patients in control group (<75 years), age ranged from 47 to 74 years old, with an average of (64.10±5.96)years old. The follow-up duration of two groups ranged from 12 to 84 months with an average of (29.35±16.52) months in elderly group, and 12 to 85 months with an average of (31.83±17.34) months in control group. There was only significant difference in age between the elderly and control groups preoperatively (P<0.01). Postoperatively, the elderly group showed significantly higher WOMAC (P<0.01) and lower SF-12 PCS scores (P<0.01) as compared to the control group. There was no significant difference between the elderly group and the control group in knee range of motion, OKS and the proportion of each scoring system reaching the minimum clinical difference value (P>0.05). In the aspect of preperative complications, the elderly group exhibited more surgical site complications and postoperative delirium compared to control group(P<0.05). The differences in other indicators including deep vein thrombosis, acute urinary retention, cardiovascular events, cerebrovascular events and radiolucent lines around prothesis were not statistically significant(P>0.05). CONCLUSION: UKA in the treatment of elderly patients over 75 years old with knee osteoarthritis was safe and feasible, and could obtain satisfactory short-term efficacy.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Osteoarthritis, Knee , Humans , Aged , Aged, 80 and over , Middle Aged , Osteoarthritis, Knee/surgery , Retrospective Studies , Propensity Score , Quality of Life , Knee Joint/surgery , Arthroplasty, Replacement, Knee/methods , Treatment OutcomeABSTRACT
By designing a tetraphenylethylene (TPE)-based AIEgen-ligand with reduced symmetry, we obtained two alkaline-earth metal-based MOFs (LIFM-102 and LIFM-103) with dense packing structures and low porosity as proved by single-crystal X-ray diffraction and CO2 sorption data. Excitingly, the desolvated MOFs with rigid environment and reduced lattice free solvent exhibit high quantum yields (QY, 64.9 % and 79.4 %) and excellent two-photon excited photoluminescence (TPA cross-sections, 2946.6â GM and 2899.0â GM), while maintaining the external-stimuli-responsive properties suitable for anticounterfeit fields. The effect of ligand conformation was validated by comparing the structure and fluorescence properties of the samples before and after desolvation and further verified by theoretical calculations. This work expands the study on TPE-cored materials to symmetry-reduced ligand and might bring forward novel structures and excellent photoluminescent properties in the future.
ABSTRACT
Organic LPL (long-persistent luminescence) materials have sparked extensive research interest due to the ultralong-lived triplet states. Although numerous organic LPL materials have been reported, most of the triplet emission was static and monotonous. Therefore, LPL materials with dynamic triplet emission are urgently required. A triamino-s-triazine derivative 1 with dynamic LPL was fabricated. The single-crystal structure shows that the abundant intermolecular interactions and small free volume restrict the molecular motion and avoid the quenchers. Spectral and theoretical calculations upheld the existence of multiple excited states in 1, and the migration of electrons between multiple excited states is very sensitive to external stimuli. By modulating the stimulus, the residence of electrons in different triplet states can be manipulated to achieve RGB LPL. Importantly, blue LPL was achieved by manipulating the anti-Kasha emission. And the red LPL can still be observed at high temperature.
ABSTRACT
RATIONALE: Pseudotumor formation after hip arthroplasty is a rare complication that can occur not only at the head-neck junction but also at the modular neck-stem junction. Dislocation is a challenging and common complication of primary and revision total hip arthroplasty compared with other complications. Similarly, the association between pseudotumors and delayed recurrent dislocation remains unclear. PATIENT CONCERNS: We report the case of a 73-year-old woman with pseudotumor formation after total hip arthroplasty combined with a modular femoral neck. A delayed recurrent dislocation occurred in this case. Approximately 4weeks after the first revision surgery, redislocation occurred. DIAGNOSIS: The patient was eventually diagnosed with delayed recurrent artificial hip dislocation combined with a periprosthetic pseudotumor of the right hip. INTERVENTIONS: During the first revision surgery, a thickened, indurated cyst measuring 8×3×8cm with a red-brown wall containing brown fluid was completely excised. A cemented stem, combined with a BIOLOX Forte ceramic head, was implanted. Approximately 4weeks after surgery, redislocation occurred, and we cemented an elevated rim liner on the acetabular component with a metal head. OUTCOMES: At the last follow-up, 49 months after revision surgery, the patient was asymptomatic with a Harris hip score of 90. The patient had a satisfactory prognosis after treatment. LESSONS: The application of the modular-neck stem should be cautiously performed, particularly for modular prostheses containing different alloys. Pseudotumors and insufficient soft-tissue tension both contribute to hip instability, which may eventually lead to delayed repeated dislocation. In addition, femoral offset must be considered. Cement-liner technology may be used for aging patients who are less active. This case report, focusing on pseudotumors and delayed recurrent dislocations, aimed to identify factors that may support this diagnosis, which is easy to miss. Consequently, it can provide further details on the treatment process and alert orthopedic surgeons to this infrequent but important cause of delayed recurrent dislocation.
Subject(s)
Arthroplasty, Replacement, Hip , Hip Dislocation , Hip Prosthesis , Aged , Arthroplasty, Replacement, Hip/adverse effects , Female , Femur Neck , Hip Dislocation/etiology , Hip Dislocation/surgery , Hip Prosthesis/adverse effects , Humans , Prosthesis Design , Prosthesis Failure , Reoperation , Retrospective StudiesABSTRACT
Excited-state intramolecular proton transfer (ESIPT) molecules demonstrating specific enol-keto tautomerism and the related photoluminescence (PL) switch have wide applications in displaying, sensing, imaging, lasing, etc. However, an ESIPT-attributed coordination polymer showing alternative PL between thermally activated fluorescence (TAF) and long persistent luminescence (LPL) has never been explored. Herein, we report the assembly of a dynamic Cd(II) coordination polymer (LIFM-101) from the ESIPT-type ligand, HPI2C (5-(2-(2-hydroxyphenyl)-4,5-diphenyl-1H-imidazol-1-yl)isophthalic acid). For the first time, TAF and/or color-tuned LPL can be achieved by controlling the temperature under the guidance of ESIPT excited states. Noteworthily, the twisted structure of the HPI2C ligand in LIFM-101 achieves an effective mixture of the higher-energy excited states, leading to ISC (intersystem crossing)/RISC (reverse intersystem crossing) energy transfer between the high-lying keto-triplet state (Tn(K*)) and the first singlet state (S1(K*)). Meanwhile, experimental and theoretical results manifest the occurrence probability and relevance among RISC, ISC, and internal conversion (IC) in this unique ESIPT-attributed coordination polymer, leading to the unprecedented TAF/LPL switching mechanism, and paving the way for the future design and application of advanced optical materials.
ABSTRACT
A two-ligand system composed of the predesigned multivalent and complementary terpyridine-based ligands was exploited to construct heteroleptic metallo-supramolecules and to investigate the self-assembly mechanism. Molecular stellation of the trimeric hexagon [Cd6L23] gave rise to the exclusive self-assembly of the star hexagon [Cd18L16L33] through complementary ligand pairing between the ditopic and octatopic tectons. To understand how the intermolecular heteroleptic complexation influenced the self-assembly pathway, the star hexagon was truncated into two triangular fragments: [Cd12L13L43] and [Cd12L13L53]. In the self-assembly of [Cd12L13L43], the conformational movements of hexatopic ligand L4 could be regulated by L1 to promote the subsequent coordination event, which was the key step to the successful multicomponent self-assembly. In contrast, the formation of [Cd12L13L53] was hampered by the geometrically mismatched intermediates.
ABSTRACT
The fabrication of highly efficient and sustainable electrocatalysts used for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is exceedingly challenging and warranted for overall water splitting. In this work, we successfully synthesized a series of metal-organic frameworks (MOFs), namely, as Fe2M-MOF (M = Fe, Co, Ni, Zn, Mn; H4L = 3,3,5,5'-azoxybenzenetetracarboxylic acid) under a simple and mild condition, in which the Fe3 cluster as a basic building unit was replaced by the second kind of metal center; at the same time, a redox-active organic linker was adopted. The Fe2M-MOF system as a multifunctional catalyst realizes great improvement of the OER and HER performances. Among of them, the Fe2Co-MOF catalyst exhibits an extremely low overpotential of 339 mV at a current density of 10 mA cm-2 and a very small Tafel slope of 36.2 mV dec-1 in an alkaline electrolyte for OER. This result has far exceeded the commercial catalyst IrO2. Meanwhile, Fe2Zn-MOF manifests excellent HER activity with a small overpotential of 221 mV at 10 mA cm-2 and a low Tafel slope of 174 mV dec-1. In addition, the good long-term stability for these catalysts can be evaluated under working conditions. Systematic investigations are used to explain the enhanced electrocatalytic mechanism. In conclusion, we provide a simple and effective strategy for the preparation of multifunctional catalysts for energy conversion applications based on a pristine MOF material with redox-active metal centers and organic linkers.
ABSTRACT
A metal-organic supramolecular nanobelt was synthesized by quantitative self-assembling terpyridine-functionized tetraphenylethylene (TPE) and Cd2+, which only showed a weak emission both in solution or aggregated state. Nevertheless, nanobelt complex could be transferred to a fluorescence turn-on sensor to S2- by taking advantage of the structural transformation from nanobelt to its fluorescent ligand.
ABSTRACT
Tetrafunctionalized calix[4]resorcinarene cavitands commonly serve as supramolecular scaffolds for construction of coordination-driven self-assembled capsules. However, due to the calix-like shape, the structural diversity of assemblies is mostly restricted to dimeric and hexameric capsules. Previously, we reported a spontaneous heteroleptic complexation strategy based on a pair of self-recognizable terpyridine-based ligands and CdII ions. Building on this complementary ligand pairing system, herein three types of nanocapsules, including a dimeric capsule, a Sierpinski triangular prism, and a cubic star, could be readily obtained through dynamic complexation reactions between a tetratopic cavitand-based ligand and various multitopic counterparts in the presence of CdII ions. The dimeric capsular assemblies display the spacer-length-dependent self-sorting behavior in a four-component system. Moreover, the precise multicomponent self-assembly of a Sierpinski triangular prism and a cubic star possessing three and six cavitand-based motifs, respectively, demonstrates that such self-assembly methodology is able to efficiently enhance architectural complexity for calix[4]resorcinarene-containing metallo-supramolecules.
ABSTRACT
Gigantic coordination molecules assembled from a large number of metal ions and organic ligands are structurally and functionally challenging to characterize. Here we show that a heterometallic cluster [Ni36Gd102(OH)132(mmt)18(dmpa)18(H2dmpa)24(CH3COO)84(SO4)18(NO3)18(H2O)30]·Br6(NO3)6·(H2O)x·(CH3OH)y, (1, x ≈ 130, y ≈ 60), shaped like a "Star of David", can be synthesized using a "mixed-ligand" and "sulfate-template" strategy. In terms of metal nuclearity number, 1 is the second largest 3d-4f cluster to date. In the solid state, 1 is porous after removing the lattice guests. The N2 adsoption experiment reveals that the BET and Langmuir surface areas are 299.8 and 412.0 cm2 g-1, respectively. CO2 adsorption at 298 K gives the amount of 45 cm3 g-1 for 1. More importantly, 1 is soluble in common organic solvents and exhibits high solution stability revealed by high resolution MALDI-TOF mass spectroscopy, small-angle X-ray scattering (SAXS), and low-dose transmission electron microscopy. The solubility and the potential open metal sites owing to the labile coordinating components prompted us to investigate the photocatalytic properties of 1, which displays high selectivity and efficiency for reduction of CO2 to CO with turnover number and turnover frequency of 29700 and 1.2 s-1, respectively. These values are higher than most catalysts working under the same conditions, presumably due to the strong Ni-CO2 binding effect. In addition, the large percentage of Gd(III) in 1 leads to a large magnetic entropy change (41.3 J·kg-1·K-1) at 2.0 K for ΔH = 7 T.
ABSTRACT
A novel metal-organic ligand (MOL 2) has been prepared by linking two V-shaped bis-terpyridines with one X-shaped tetrakis-terpyridine through the stable
ABSTRACT
Rational design of a Prussian blue analogue (PBA)@Ni-Co layered double hydroxide (NiCo-LDH) nanocomposite electrode material is vitally important for synthesizing high-performance supercapacitor electrodes. In this work, such nanocomposite electrode materials were successfully fabricated by a facile hydrothermal method. Firstly, three-dimensional (3D) regulated NiCo-LDH nanosheets with high interlayer space were grown on nickel foam under mild synthetic conditions. Then these nanosheets as a precursor were in situ converted into the target PBA@NiCo-LDH/NF nanocomposite electrode by a facile thermal ion-exchange reaction with potassium ferricyanide (K3[Fe(CN)6]). A series of PBA@NiCo-LDH/NF nanocomposite electrodes were fabricated with different ratios of Ni and Co and reaction temperatures. Their structures and morphologies were characterized by X-ray diffraction (XRD), FT-IR and scanning electron microscopy (SEM). Electrochemical investigation reveals that the PBA@Ni0.4Co0.6-LDH electrode exhibits the best electrochemical performance with an area specific capacitance of 2004.26 mF cm-2 at 1 mA cm-2, which is much higher (about three times) than the properties of each single component. All results demonstrate that (1) high-performance composite electrodes can be effectively fabricated and (2) fabrication of such composites is highly necessary and important.
ABSTRACT
A shape-persistent metallosupramolecular multirhomboid that inlays a hexarhomboid polygon in a three-lobed flat structure was prepared by means of coordination-driven self-assembly. The key ligands were synthesized by a "reaction on complex" strategy that becomes accessible to troublesome metalloorganic ligand L3. The formation here consists of four different starting components and two metal ions. Complementarity of the shape and size drives molecular puzzling and results in the multicomponent, quantitative self-assembled construct.
ABSTRACT
Three heterobimetallic metallomacrocycles were readily assembled through either a stepwise or a one-pot protocol by selective complexation of ZnII ions and PdII or PtII acceptors with the predesigned ligands possessing one 60°-bent bisterpyridine and two mono- or bis-pyridines. In the multicomponent self-assembly, the preorganized ZnII-terpyridine metallo-triangle led to the formation of the exterior macrocycles.
ABSTRACT
The intricate discrete supramolecular architectures via two or more noncovalent interactions are very attractive for chemists. In this paper, a series of homomeric metallo-supramolecular lemniscates were prepared in nearly quantitative yields by assembling either dialkylammonium salt- or benzo-21-crown-7 (B21C7)-containing terpyridyl metallo-organic ligands with Zn2+. Furthermore, the heteromeric analogue could be obtained through two ways: (1) the cooperative interaction of coordination-driven self-assembly and host-guest recognition and (2) the transformation from homodimers to heterodimers driven by host-guest interaction. These supramolecules were characterized by nuclear magnetic resonance (NMR), diffusion-ordered NMR spectroscopy, electrospray ionization mass spectrometry, and two-dimensional (2D) ion-mobility mass spectrometry.