Indole-3-carboxaldehyde alleviates acetaminophen-induced liver injury via inhibition of oxidative stress and apoptosis.

Drug-induced liver injury (DILI) occurs frequently and can be life-threatening. Increasing researches suggest that acetaminophen (APAP) overdose is a leading cause of drug-induced liver injury. Indole-3-carboxaldehyde (I3A) alleviates hepatic inflammation, fibrosis and atherosclerosis, suggesting a potential role in different disease development. However, the question of whether and how I3A protects against acetaminophen-induced liver injury remains unanswered. In this study, we demonstrated that I3A treatment effectively mitigates acetaminophen-induced liver injury. Serum alanine/aspartate aminotransferases (ALT/AST), liver malondialdehyde (MDA) activity, liver glutathione (GSH), and superoxide dismutase (SOD) levels confirmed the protective effect of I3A against APAP-induced liver injury. Liver histological examination provided further evidence of I3A-induced protection. Mechanistically, I3A reduced the expression of apoptosis-related factors and oxidative stress, alleviating disease symptoms. Finally, I3A treatment improved survival in mice receiving a lethal dose of APAP. In conclusion, our study demonstrates that I3A modulates hepatotoxicity and can be used as a potential therapeutic agent for DILI.

Quantum annealing of a frustrated magnet.

Quantum annealing, which involves quantum tunnelling among possible solutions, has state-of-the-art applications not only in quickly finding the lowest-energy configuration of a complex system, but also in quantum computing. Here we report a single-crystal study of the frustrated magnet α-CoV2O6, consisting of a triangular arrangement of ferromagnetic Ising spin chains without evident structural disorder. We observe quantum annealing phenomena resulting from time-reversal symmetry breaking in a tiny transverse field. Below ~ 1 K, the system exhibits no indication of approaching the lowest-energy state for at least 15 hours in zero transverse field, but quickly converges towards that configuration with a nearly temperature-independent relaxation time of ~ 10 seconds in a transverse field of ~ 3.5 mK. Our many-body simulations show qualitative agreement with the experimental results, and suggest that a tiny transverse field can profoundly enhance quantum spin fluctuations, triggering rapid quantum annealing process from topological metastable Kosterlitz-Thouless phases, at low temperatures.

Bioinspired Flexible Hydrogelation with Programmable Properties for Tactile Sensing.

Tactile sensing requires integrated detection platforms with distributed and highly sensitive haptic sensing capabilities along with biocompatibility, aiming to replicate the physiological functions of the human skin and empower industrial robotic and prosthetic wearers to detect tactile information. In this regard, short peptide-based self-assembled hydrogels show promising potential to act as bioinspired supramolecular substrates for developing tactile sensors showing biocompatibility and biodegradability. However, the intrinsic difficulty to modulate the mechanical properties severely restricts their extensive employment. Herein, by controlling the self-assembly of 9-fluorenylmethoxycarbonyl-modifid diphenylalanine (Fmoc-FF) through introduction of polyethylene glycol diacrylate (PEGDA), wider nanoribbons are achieved by untwisting from well-established thinner nanofibers, and the mechanical properties of the supramolecular hydrogels can be enhanced 10-fold, supplying bioinspired supramolecular encapsulating substrate for tactile sensing. Furthermore, by doping with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and 9-fluorenylmethoxycarbonyl-modifid 3,4-dihydroxy-l-phenylalanine (Fmoc-DOPA), the Fmoc-FF self-assembled hydrogels can be engineered to be conductive and adhesive, providing bioinspired sensing units and adhesive layer for tactile sensing applications. Therefore, the integration of these modules results in peptide hydrogelation-based tactile sensors, showing high sensitivity and sustainable responses with intrinsic biocompatibility and biodegradability. The findings establish the feasibility of developing programmable peptide self-assembly with adjustable features for tactile sensing applications.

LINC00963 Promotes Cisplatin Resistance in Esophageal Squamous Cell Carcinoma by Interacting with miR-10a to Upregulate SKA1 Expression.

Long non-coding RNA (lncRNA) is associated with a large number of tumor cellular functions together with chemotherapy resistance in a variety of tumors. LINC00963 was identified to regulate the malignant progression of various cancers. However, whether LINC00963 affects drug resistence in esophageal squamous cell carcinoma (ESCC) and the relevant molecular mechanisms have never been reported. This study aims to investigate the effect of LINC00963 on cisplatin resistance in ESCC. After detecting the level of LINC00963 in human esophageal squamous epithelial cells (HET-1 A), ESCC cells (TE-1) and cisplatin resistant cells of ESCC (TE-1/DDP), TE-1/DDP cell line and nude mouse model that interfered with LINC00963 expression were established. Then, the interaction among LINC00963, miR-10a, and SKA1 was clarified by double luciferase and RNA immunoprecipitation (RIP) assays. Meanwhile, the biological behavior changes of TE-1/DDP cells with miR-10a overexpression or SKA1 silencing were observed by CCK-8, flow cytometry, scratch, Transwell, and colony formation tests. Finally, the biological function of the LINC00963/SKA1 axis was elucidated by rescue experiments. LINC00963 was upregulated in TE-1 and TE-1/DDP cell lines. LINC00963 knockdown inhibited SKA1 expression of both cells and impaired tumorigenicity. Moreover, LINC00963 has a target relationship with miR-10a, and SKA1 is a target gene of miR-10a. MiR-10a overexpression or SKA1 silencing decreased the biological activity of TE-1/DDP cells and the expression of SKA1. Furthermore, SKA1 overexpression reverses the promoting effect of LINC00963 on cisplatin resistance of ESCC. LINC00963 regulates TE-1/DDP cells bioactivity and mediates cisplatin resistance through interacting with miR-10a and upregulating SKA1 expression.

An experimental and theoretical study on cell swelling for osmotic imbalance induced by electroporation.

The cellular membrane serves as a pivotal barrier in regulating intra- and extracellular matter exchange. Disruption of this barrier through pulsed electric fields (PEFs) induces the transmembrane transport of ions and molecules, creating a concentration gradient that subsequently results in the imbalance of cellular osmolality. In this study, a multiphysics model was developed to simulate the electromechanical response of cells exposed to microsecond pulsed electric fields (µsPEFs). Within the proposed model, the diffusion coefficient of the cellular membrane for various ions was adjusted based on electropore density. Cellular osmolality was governed and described using Van't Hoff theory, subsequently converted to loop stress to dynamically represent the cell swelling process. Validation of the model was conducted through a hypotonic experiment and simulation at 200 mOsm/kg, revealing a 14.2% increase in the cell's equivalent radius, thereby confirming the feasibility of the cell mechanical model. With the transmembrane transport of ions induced by the applied µsPEF, the hoop stress acting on the cellular membrane reached 179.95 Pa, and the cell equivalent radius increased by 11.0% when the extra-cellular medium was supplied with normal saline. The multiphysics model established in this study accurately predicts the dynamic changes in cell volume resulting from osmotic imbalance induced by PEF action. This model holds theoretical significance, offering valuable references for research on drug delivery and tumor microenvironment modulation.

Comparison Results of Three-Port Robot-Assisted and Uniportal Video-Assisted Lobectomy for Functional Recovery Index in the Treatment of Early Stage Non-small Cell Lung Cancer: A Propensity Score-Matched Analysis.

BACKGROUND: Minimally invasive lobectomy is the standard treatment for early stage non-small cell lung cancer (NSCLC). The aim of this study is to investigate postoperative recovery in a prospective trial of discharged patients with early stage non-small cell lung cancer undergoing robot-assisted thoracic surgery (RATS) versus uniportal video-assisted thoracic surgery (UVATS). PATIENTS AND METHODS: This is a prospective and observational study. From 9 September 2022 to 1 July 2023, 178 patients diagnosed with NSCLC admitted to the Department of Thoracic Surgery of Shandong Provincial Hospital signed informed consent and underwent lobectomy by RATS and UVATS. The functional recovery index included MD Anderson Symptom Inventory, Christensen Fatigue Scale, EORTC QLQ-C30, and Leicester Cough Questionnaire. RESULTS: After propensity score-matched analysis, each group included 42 cases. For the baseline characteristics of patients, operation time (p = 0.01) and length of stay (p = 0.04) were shorter in the RATS group. The number of lymph nodes resected in the RATS group was much more than in the UVATS group. According to our investigation, appetite loss, nausea, diarrhea, and cough severity after RATS were better than after UVATS. After the first week, pain severity degree of the RATS group was higher than UVATS, while there was no difference during the second and third week. The physical score of the RATS group was higher than the UVATS group (p = 0.04), according to the Leicester Cough Questionnaire. CONCLUSION: RATS was associated with severe short-term postoperative pain but less postoperative complications.

Preparation and Characterization of Modified ZrO2/SiO2/Silicone-Modified Acrylic Emulsion Superhydrophobic Coating.

Superhydrophobic coatings have increasingly become the focal point of research due to their distinctive properties like water resistance, wear resistance, and acid-base resilience. In pursuit of maximizing their efficiency, research has primarily revolved around refining the fabrication process and the composition of emulsion/nanoparticle coatings. We innovatively devised a superhydrophobic coating by employing a spraying technique. This involved integrating a γ-Methacryloyloxypropyltrimethoxysilane (KH570)-modified ZrO2/SiO2/silicone-modified acrylic emulsion. A comprehensive evaluation of this coating was undertaken using analytical instruments such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and confocal laser scanning microscopy (CLSM). The coating demonstrated exceptional performance across a range of tests, including wear, immersion, and anti-icing cleaning, showcasing notable wear resistance, sodium chloride corrosion resistance, self-cleaning efficiency, and thermal stability. In particular, one coating exhibited super-hydrophobic properties, with a high contact angle of 158.5 degrees and an impressively low rolling angle of 1.85 degrees. This remarkable combination of properties is attributed to the judicious selection of components, which significantly reinforced the mechanical strength of the coating. These enhancements make it highly suitable for industrial applications where self-cleaning, anti-icing, and anti-contamination capabilities are critical.

Profile analysis of N4-acetylcytidine (ac4C) on mRNA of human lung adenocarcinoma and paired adjacent non-tumor tissues.

BACKGROUND: RNA modification, a major component of post-transcriptional modification, plays an essential role in tumor initiation and progression. N4-acetylcytidine (ac4C) present in different species as a highly conserved RNA modification. ac4C on mRNA increases the stability of mRNA and the efficiency of protein translation. However, the mRNA profiling of ac4C in lung adenocarcinoma (LUAD) is unknown. METHODS: NAT10 expression was tested using immunohistochemistry in tissue microarray (TMA). The ac4C peaks on mRNA were identified through acetylated RNA immunoprecipitation sequencing in both human LUAD tissues and adjacent non-tumor tissues, and differences of acetylation and mRNA between the two groups were analyzed. Furthermore, the function of AC4C-specific acetylated transcripts was analyzed bioinformatically. And a ac-RIP-PCR was used to verify the ac4C acetylation sites of TFAP2A. RESULTS: The expression of acetylated key enzyme NAT10 was obviously increased in LUAD group. Then we found noticeable differences in ac4C mRNA modification between LUAD and adjacent non-tumor tissues. In addition, bioinformatics analysis showed that the distinctive distribution pattern of mRNA ac4C in LUAD affects a variety of cellular functions, such as protein sumoylation and transmembrane transporter activity. Importantly, we verified the ac4C level of TFAP2A was up-regulated in LUAD. CONCLUSIONS: Our study revealed that the degree of ac4C in mRNA in LUAD was significantly higher than in adjacent tissues and was concentrated mainly in the coding sequences with a implications in a wide range of cellular functions. The ac4C may become a new molecular marker and treatment target for lung cancer.

Beyond Pattern Variance: Unsupervised 3-D Action Representation Learning With Point Cloud Sequence.

This work pays the first research effort to address unsupervised 3-D action representation learning with point cloud sequence, which is different from existing unsupervised methods that rely on 3-D skeleton information. Our proposition is built on the state-of-the-art 3-D action descriptor 3-D dynamic voxel (3DV) with contrastive learning (CL). The 3DV can compress the point cloud sequence into a compact point cloud of 3-D motion information. Spatiotemporal data augmentations are conducted on it to drive CL. However, we find that existing CL methods (e.g., SimCLR or MoCo v2) often suffer from high pattern variance toward the augmented 3DV samples from the same action instance, that is, the augmented 3DV samples are still of high feature complementarity after CL, while the complementary discriminative clues within them have not been well exploited yet. To address this, a feature augmentation adapted CL (FACL) approach is proposed, which facilitates 3-D action representation via concerning the features from all augmented 3DV samples jointly, in spirit of feature augmentation. FACL runs in a global-local way: one branch learns global feature that involves the discriminative clues from the raw and augmented 3DV samples, and the other focuses on enhancing the discriminative power of local feature learned from each augmented 3DV sample. The global and local features are fused to characterize 3-D action jointly via concatenation. To fit FACL, a series of spatiotemporal data augmentation approaches is also studied on 3DV. Wide-range experiments verify the superiority of our unsupervised learning method for 3-D action feature learning. It outperforms the state-of-the-art skeleton-based counterparts by 6.4% and 3.6% with the cross-setup and cross-subject test settings on NTU RGB + D 120, respectively. The source code is available at https://github.com/tangent-T/FACL.

Contactless acoustic tweezer for droplet manipulation on superhydrophobic surfaces.

Droplet manipulation on superhydrophobic surfaces (DMSS) without conventional pipetting is an emerging liquid handling technology, which can be potentially used for diagnostic, analysis, and synthetic processes. Despite notable progress, controlling droplet motion on superhydrophobic surfaces by contactless acoustic waves is rarely reported. Herein, we report a contactless acoustic tweezer (CAT) for DMSS based on establishing ultrasonic standing wave between an ultrasound transducer (UST) and a superhydrophobic substrate to manipulate droplets without physical contact. The CAT utilizes acoustic radiation forces to trap and move droplets on superhydrophobic surfaces, which allows for precise and controllable movement of droplets by controlling the movement of the UST. Small droplets with volume less than 20 µL can be levitated in mid-air for out-plane manipulation, and large droplets with volume up to 500 µL can be trapped for in-plane manipulation. Experimental results demonstrate the versatility of the CAT for manipulating droplets with various compositions and volumes on various superhydrophobic substrates, offering a versatile and cross-contamination-free liquid handling approach for applications, including but not limited to high-throughput surface-enhanced Raman scattering.

Interaction of Genotype, Environment, and Management on Organ-Specific Critical Nitrogen Dilution Curve in Wheat.

The organ-specific critical nitrogen (Nc) dilution curves are widely thought to represent a new approach for crop nitrogen (N) nutrition diagnosis, N management, and crop modeling. The Nc dilution curve can be described by a power function (Nc = A1·W-A2), while parameters A1 and A2 control the starting point and slope. This study aimed to investigate the uncertainty and drivers of organ-specific curves under different conditions. By using hierarchical Bayesian theory, parameters A1 and A2 of the organ-specific Nc dilution curves for wheat were derived and evaluated under 14 different genotype × environment × management (G × E × M) N fertilizer experiments. Our results show that parameters A1 and A2 are highly correlated. Although the variation of parameter A1 was less than that of A2, the values of both parameters can change significantly in response to G × E × M. Nitrogen nutrition index (NNI) calculated using organ-specific Nc is in general consistent with NNI estimated with overall shoot Nc, indicating that a simple organ-specific Nc dilution curve may be used for wheat N diagnosis to assist N management. However, the significant differences in organ-specific Nc dilution curves across G × E × M conditions imply potential errors in Nc and crop N demand estimated using a general Nc dilution curve in crop models, highlighting a clear need for improvement in Nc calculations in such models. Our results provide new insights into how to improve modeling of crop nitrogen-biomass relations and N management practices under G × E × M.

Emergent Glassy Behavior in a Kagome Rydberg Atom Array.

We present large-scale quantum Monte Carlo simulation results on a realistic Hamiltonian of kagome-lattice Rydberg atom arrays. Although the system has no intrinsic disorder, intriguingly, our analyses of static and dynamic properties on large system sizes reveal emergent glassy behavior in a region of parameter space located between two valence bond solid phases. The extent of this glassy region is demarcated using the Edwards-Anderson order parameter, and its phase transitions to the two proximate valence bond solids-as well as the crossover towards a trivial paramagnetic phase-are identified. We demonstrate the intrinsically slow (imaginary) time dynamics deep inside the glassy phase and discuss experimental considerations for detecting such a quantum disordered phase with numerous nearly degenerate local minima. Our proposal paves a new route to the study of real-time glassy phenomena and highlights the potential for quantum simulation of a distinct phase of quantum matter beyond solids and liquids in current-generation Rydberg platforms.

Acoustic tweezers using bisymmetric coherent surface acoustic waves for dynamic and reconfigurable manipulation of particle multimers.

HYPOTHESIS: The accurate and dynamic manipulation of multiple micro-sized objects has always been a technical challenge in areas of colloid assembly, tissue engineering, and organ regeneration. The hypothesis of this paper is the precise modulation and parallel manipulation of morphology of individual and multiple colloidal multimers can be achieved by customizing acoustic field. EXPERIMENTS: Herein, we present a colloidal multimer manipulation method by using acoustic tweezers with bisymmetric coherent surface acoustic waves (SAWs), which enables contactless morphology modulation of individual colloidal multimers and patterning arrays by regulating the shape of acoustic field to specific desired distributions with high accuracy. Rapid switching of multimer patterning arrays, morphology modulation of individual multimers, and controllable rotation can be achieved by regulating coherent wave vector configurations and phase relations in real time. FINDINGS: To demonstrate the capabilities of this technology, we have firstly achieved eleven patterns of deterministic morphology switching for single hexamer and precise switching between three array modes. In addition, the assembly of multimers with three kinds of specific widths and controllable rotation of single multimers and arrays were demonstrated from 0 to 22.4 rpm (tetramers). Therefore, this technique enables reversible assembly and dynamic manipulation of particles and/or cells in colloid synthesis applications.

Racemic Amino Acid Assembly Enables Supramolecular ß-Sheet Transition with Property Modulations.

Amino acids are the most simplistic bio-building blocks and perform a variety of functions in metabolic activities. Increasing publications report that amino acid-based superstructures present amyloid-like characteristics, arising from their supramolecular ß-sheet secondary structures driven by hydrogen-bonding-connected supramolecular ß-strands, which are formed by head-to-tail hydrogen bonds between terminal amino and carboxyl groups of the adjacent residues. Therefore, the establishment of the structure-function relationships is critical for exploring the properties and applications of amino acid assemblies. Among the naturally encoded self-assembling amino acids, tyrosine (Y)-based superstructures have been found to show diverse properties and functions including high rigidity, promoting melanin formations, mood regulations, and preventing anxiety, thus showing promising potential as next-generation functional biomaterials for biomedical and bio-machine interface applications. However, the development of Y-based organizations of functional features is severely limited due to the intrinsic difficulty of modulating the energetically stable supramolecular ß-sheet structures. Herein, we report that by the racemic assembly of l-Y and d-Y, the supramolecular secondary structures are modulated from the antiparallel ß-sheets in the enantiomeric assemblies to the parallel ones in the racemate counterparts, thus leading to higher degrees of freedom, which finally induce distinct organization kinetics and modulation of the physicochemical properties including the optical shifts, elastic softening, and the piezoelectric outputs of the superstructures.

Bisymmetric coherent acoustic tweezers based on modulation of surface acoustic waves for dynamic and reconfigurable cluster manipulation of particles and cells.

Acoustic tweezers based on surface acoustic waves (SAWs) have raised great interest in the fields of tissue engineering, targeted therapy, and drug delivery. Generally, the complex structure and array layout design of interdigital electrodes would restrict the applications of acoustic tweezers. Here, we present a novel approach by using bisymmetric coherent acoustic tweezers to modulate the shape of acoustic pressure fields with high flexibility and accuracy. Experimental tests were conducted to perform the precise, contactless, and biocompatible cluster manipulation of polystyrene microparticles and yeast cells. Stripe, dot, quadratic lattice, hexagonal lattice, interleaved stripe, oblique stripe, and many other complex arrays were achieved by real-time modulation of amplitudes and phase relations of coherent SAWs to demonstrate the capability of the device for the cluster manipulation of particles and cells. Furthermore, rapid switching among various arrays, shape regulation, geometric parameter modulation of array units, and directional translation of microparticles and cells were implemented. This study demonstrated a favorable technique for flexible and versatile manipulation and patterning of cells and biomolecules, and it has the advantages of high manipulation accuracy and adjustability, thus it is expected to be utilized in the fields of targeted cellular assembly, biological 3D printing, and targeted release of drugs.

Short-term outcomes of near-infrared imaging using indocyanine green in laparoscopic lateral pelvic lymph node dissection for middle-lower rectal cancer: A propensity score-matched cohort analysis.

Laparoscopic lateral pelvic lymph node dissection (LPND) is limited by complex neurovascular bundles in the narrow pelvic sidewall and various post-operative complications. Indocyanine green (ICG) has been applied to increase the number of harvested lymph nodes and reduce the injury of irrelevant vessels in patients with rectal cancer. However, few studies on the recurrence rate of ICG fluorescence imaging-guided laparoscopic LPND were reported. This retrospective study enrolled 50 middle- low rectal cancer patients who were treated by LPND. After propensity score matching, 20 patients were matched in each of the indocyanine green (ICG) guided imaging group (ICG group) and non-ICG guided imaging group (non-ICG group). The average follow-up time was 13.5 months (12-15 months). Our results showed that the total number of harvested lymph nodes in the ICG group was significantly higher than that in the non-ICG group (P < 0.05), and intraoperative blood loss and post-operative hospital stay times in the ICG group were less than those in the non-ICG group (P < 0.05). After 12 months of follow-up, no residual lymph node and local tumor recurrence were found for patients in the ICG group. Four patients in the non-ICG group detected residual lymph nodes at the 3-month visit. Our findings highlighted the importance of ICG fluorescence-guided imaging in LPND because it has unique advantages in improving the number of lymph node dissections, surgical accuracy, and decreasing the residual lymph nodes and local tumor recurrence. In addition, ICG fluorescence guidance technology can effectively shorten the operation time, and it is simple to operate, which is worth popularizing.

Development of Pressure Sensor Based Wearable Pulse Detection Device for Radial Pulse Monitoring.

Wearable pulse detection devices can be used for daily human healthcare monitoring; however, the relatively poor flexibility and low sensitivity of the pulse detection devices are hindering the scrutiny of pulse information during pulse diagnosis of different pulse positions. This paper developed a novel and wearable pulse detection device based on three flexible pressure sensors using synthetic graphene and silver composites as the pressure sensing material. The structural design of the pulse detection device is firstly presented; the core component of pressure sensors is using the sawtooth protrusions to convert pressure induced by radial pulse vibrations into localized deformation of graphene composites. The fabricated pulse detection device is characterized by high pressure sensing performance, including relatively high sensitivity (8.65% kPa-1), broad sensing range (12 kPa), and good dynamic response with a response time of about 100 ms. Then, the pulse detection device is worn on a human wrist to detect the pulses from three pulse positions, namely, 'Cun', 'Guan', and 'Chi', and the results demonstrated the capability of using our device to detect pulse signals. The physical conditions of the subject, such as arterial stiffness index, can be further analyzed through the characteristics of the acquired pulse signals, demonstrating the potential application of using wearable pulse detection devices for human health monitoring.

High-throughput and directed microparticle manipulation in complex-shaped maze chambers based on travelling surface acoustic waves.

High-throughput automated manipulation of microparticles in complex-shaped environments has been demonstrated with great potential in the field of pharmaceutical microfluidics. Generally, the development of a highly efficient actuation method for functional microparticle manipulation in complex-shaped chamber structures is the key challenge of this technology. Here, we present a novel traveling surface acoustic wave (TSAW)-based manipulation device that allows for automated and high-throughput maze-solving manipulation of microparticles inside complex round-shaped and square-shaped maze chambers. This technology relies on the localized acoustic streaming effects generated by TSAWs, which are capable of automatically trapping microparticles and driving them to move along the determined trajectories based on the topographic features of the maze chamber. Numerical modelling and simulation were conducted to demonstrate the feasibility of our proposed device for targeted microparticle transportation in complex-shaped maze chamber environments. In addition, by configuring the excitation of electric signals of interdigital transducers (IDTs), such as excitation frequency and input voltage, the motion velocity of microparticles can be rapidly adjusted within 0.1 s. Thus, our device enables low-cost, compact, and contactless trajectory manipulation of high-throughput microparticles inside chambers with complex topographical features and would have application in cell-directed transportation, low-volume chemical mixing, and precise drug delivery.

Triangular lattice quantum dimer model with variable dimer density.

Quantum dimer models are known to host topological quantum spin liquid phases, and it has recently become possible to simulate such models with Rydberg atoms trapped in arrays of optical tweezers. Here, we present large-scale quantum Monte Carlo simulation results on an extension of the triangular lattice quantum dimer model with terms in the Hamiltonian annihilating and creating single dimers. We find distinct odd and even [Formula: see text] spin liquids, along with several phases with no topological order: a staggered crystal, a nematic phase, and a trivial symmetric phase with no obvious broken symmetry. We also present dynamic spectra of the phases, and note implications for experiments on Rydberg atoms.

Preparation of a demulsifier for oily wastewater using thorn fir bark as raw materials via a hydrothermal and solvent-free amination route.

In current work, a TB-EDA demulsifier for disposing oily wastewater was prepared using thorn fir bark (TB) as starting materials via a hydrothermal and solvent-free amination route. Field emission scanning electron microscope (FE-SEM), energy dispersive X-ray spectrometer (EDS), and Fourier transform infrared spectroscope (FT-IR) were employed to characterize the TB-EDA demulsifier. Three-phase contact angle (CA), interfacial activity, formation of interfacial film (FIF), coalescence time of droplets (CTD), dynamic interfacial tension (IFT), and Zeta potential were carried out to study the possible demulsification mechanism. Bottle test was performed to investigate the effect of the TB-EDA dosage, salinity, and pH value on the demulsification performance at room temperature. Light transmittance (DL) and oil removal rate (DR) of separated water were 94.7% and 97.2%, respectively, with 100 mg/L of TB-EDA demulsifier in oily wastewater at room temperature. In addition, the TB-EDA demulsifier has an excellent salt tolerance even at the salinity of 50,000 mg/L. The corresponding DL and DR could reach 99.8% and 99.9%, respectively.