Bevel-edge epitaxy of ferroelectric rhombohedral boron nitride single crystal.

Within the family of two-dimensional dielectrics, rhombohedral boron nitride (rBN) is considerably promising owing to having not only the superior properties of hexagonal boron nitride1-4-including low permittivity and dissipation, strong electrical insulation, good chemical stability, high thermal conductivity and atomic flatness without dangling bonds-but also useful optical nonlinearity and interfacial ferroelectricity originating from the broken in-plane and out-of-plane centrosymmetry5-23. However, the preparation of large-sized single-crystal rBN layers remains a challenge24-26, owing to the requisite unprecedented growth controls to coordinate the lattice orientation of each layer and the sliding vector of every interface. Here we report a facile methodology using bevel-edge epitaxy to prepare centimetre-sized single-crystal rBN layers with exact interlayer ABC stacking on a vicinal nickel surface. We realized successful accurate fabrication over a single-crystal nickel substrate with bunched step edges of the terrace facet (100) at the bevel facet (110), which simultaneously guided the consistent boron-nitrogen bond orientation in each BN layer and the rhombohedral stacking of BN layers via nucleation near each bevel facet. The pure rhombohedral phase of the as-grown BN layers was verified, and consequently showed robust, homogeneous and switchable ferroelectricity with a high Curie temperature. Our work provides an effective route for accurate stacking-controlled growth of single-crystal two-dimensional layers and presents a foundation for applicable multifunctional devices based on stacked two-dimensional materials.

Atomic Ruthenium-Promoted Cadmium Sulfide for Photocatalytic Production of Amino Acids from Biomass Derivatives.

Amino acids are the building blocks of proteins and are widely used as important ingredients for other nitrogen-containing molecules. Here, we report the sustainable production of amino acids from biomass-derived hydroxy acids with high activity under visible-light irradiation and mild conditions, using atomic ruthenium-promoted cadmium sulfide (Ru1/CdS). On a metal basis, the optimized Ru1/CdS exhibits a maximal alanine formation rate of 26.0 molAla·gRu­1·h­1, which is 1.7 times and more than two orders of magnitude higher than that of its nanoparticle counterpart and the conventional thermocatalytic process, respectively. Integrated spectroscopic analysis and density functional theory calculations attribute the high performance of Ru1/CdS to the facilitated charge separation and O-H bond dissociation of the a-hydroxy group, here of lactic acid. The operando nuclear magnetic resonance further infers a unique "double activation" mechanism of both the CH-OH and CH3-CH-OH structures in lactic acid, which significantly accelerates its photocatalytic amination toward alanine.

Magic Momenta and Three-Dimensional Landau Levels from a Three-Dimensional Graphite Moiré Superlattice.

In this Letter, we theoretically explore the physical properties of a new type of three-dimensional graphite moiré superlattice, the bulk alternating twisted graphite (ATG) system with homogeneous twist angle, which is grown by in situ chemical vapor decomposition method. Compared to twisted bilayer graphene (TBG), the bulk ATG system is bestowed with an additional wave vector degree of freedom due to the extra dimensionality. As a result, when the twist angle of bulk ATG is smaller than twice of the magic angle of TBG, there always exist "magic momenta" which host topological flat bands with vanishing in-plane Fermi velocities. Most saliently, when the twist angle is relatively large, a dispersionless three-dimensional zeroth Landau level would emerge in the bulk ATG, which may give rise to robust three-dimensional quantum Hall effects and unusual quantum-Hall physics over a large range of twist angles.

Unraveling the Nanoscale Segregation Mechanism in N-Doped Niobium for Enhanced SRF Performance.

The nitrogen doping (N-doping) treatment for niobium superconducting radio-frequency (SRF) cavities is one of the key enabling technologies that support the development of more efficient future large accelerators. However, the N-doping results have diverged due to a complex chemical profile under the nitrogen-doped surface. Particularly, under industrial-scale production conditions, it is difficult to understand the underlying mechanism thus hindering performance improvement. Herein, a combination of spatially resolved and surface-sensitive approaches is employed to establish the detailed near-surface phase composition of thermally processed niobium. The results show that intermediate phase segregations, particularly the nanometric carbon-rich phase, can impede the nitridation process and limit the interactions between nitrogen and the niobium sub-surface. In comparison, the removal of the carbon-rich layer at the Nb surface leads to enhanced nitrogen binding at the Nb surface. Combining the RF test results, it is shown that the complex uniformity and grain boundary penetrations of impurity elements have a direct correlation with the mid-field quench behavior in the N-doped Nb cavities. Therefore, proper control of the nanometric intermediate phase formation in discrete thermal steps is critical in improving the ultimate performance and production yield of the Nb cavities.

Direct In- and Out-of-Plane Writing of Metals on Insulators by Electron-Beam-Enabled, Confined Electrodeposition with Submicrometer Feature Size.

Additive microfabrication processes based on localized electroplating enable the one-step deposition of micro-scale metal structures with outstanding performance, e.g., high electrical conductivity and mechanical strength. They are therefore evaluated as an exciting and enabling addition to the existing repertoire of microfabrication technologies. Yet, electrochemical processes are generally restricted to conductive or semiconductive substrates, precluding their application in the manufacturing of functional electric devices where direct deposition onto insulators is often required. Here, the direct, localized electrodeposition of copper on a variety of insulating substrates, namely Al2 O3 , glass and flexible polyethylene, is demonstrated, enabled by electron-beam-induced reduction in a highly confined liquid electrolyte reservoir. The nanometer-size of the electrolyte reservoir, fed by electrohydrodynamic ejection, enables a minimal feature size on the order of 200 nm. The fact that the transient reservoir is established and stabilized by electrohydrodynamic ejection rather than specialized liquid cells can offer greater flexibility toward deposition on arbitrary substrate geometries and materials. Installed in a low-vacuum scanning electron microscope, the setup further allows for operando, nanoscale observation and analysis of the manufacturing process.

Conversion of chirality to twisting via sequential one-dimensional and two-dimensional growth of graphene spirals.

The properties of two-dimensional (2D) van der Waals materials can be tuned through nanostructuring or controlled layer stacking, where interlayer hybridization induces exotic electronic states and transport phenomena. Here we describe a viable approach and underlying mechanism for the assisted self-assembly of twisted layer graphene. The process, which can be implemented in standard chemical vapour deposition growth, is best described by analogy to origami and kirigami with paper. It involves the controlled induction of wrinkle formation in single-layer graphene with subsequent wrinkle folding, tearing and re-growth. Inherent to the process is the formation of intertwined graphene spirals and conversion of the chiral angle of 1D wrinkles into a 2D twist angle of a 3D superlattice. The approach can be extended to other foldable 2D materials and facilitates the production of miniaturized electronic components, including capacitors, resistors, inductors and superconductors.

Enhanced copper anticorrosion from Janus-doped bilayer graphene.

The atomic-thick anticorrosion coating for copper (Cu) electrodes is essential for the miniaturisation in the semiconductor industry. Graphene has long been expected to be the ultimate anticorrosion material, however, its real anticorrosion performance is still under great controversy. Specifically, strong electronic couplings can limit the interfacial diffusion of corrosive molecules, whereas they can also promote the surficial galvanic corrosion. Here, we report the enhanced anticorrosion for Cu simply via a bilayer graphene coating, which provides protection for more than 5 years at room temperature and 1000 h at 200 °C. Such excellent anticorrosion is attributed to a nontrivial Janus-doping effect in bilayer graphene, where the heavily doped bottom layer forms a strong interaction with Cu to limit the interfacial diffusion, while the nearly charge neutral top layer behaves inertly to alleviate the galvanic corrosion. Our study will likely expand the application scenarios of Cu under various extreme operating conditions.

Fe-Intercalation Dominated Ferromagnetism of van der Waals Fe3 GeTe2.

Fe3 GeTe2 have proven to be of greatly intrigue. However, the underlying mechanism behind the varying Curie temperature (Tc ) values remains a puzzle. This study explores the atomic structure of Fe3 GeTe2 crystals exhibiting Tc values of 160, 210, and 230 K. The elemental mapping reveals a Fe-intercalation on the interstitial sites within the van der Waals gap of the high-Tc (210 and 230 K) samples, which are observed to have an exchange bias effect by electrical transport measurements, while Fe intercalation or the bias effect is absent in the low-Tc (160 K) samples. First-principles calculations further suggest that the Fe-intercalation layer may be responsible for the local antiferromagnetic coupling that gives rise to the exchange bias effect, and that the interlayer exchange paths greatly contribute to the enhancement of Tc . This discovery of the Fe-intercalation layer elucidates the mechanism behind the hidden antiferromagnetic ordering that underlies the enhancement of Tc in Fe3 GeTe2 .

Promotion of the Nucleation of Ultrafine Ni-Rich Layered Oxide Primary Particles by an Atomic Layer-Deposited Thin Film for Enhanced Mechanical Stability.

Understanding the atomistic mechanisms of non-equilibrium processes during solid-state synthesis, such as nucleation and grain structure formation of a layered oxide phase, is a critical challenge for developing promising cathode materials such as Ni-rich layered oxide for Li-ion batteries. In this study, we found that the aluminum oxide coating layer transforms into lithium aluminate as an intermediate, which has favorable low interfacial energies with the layered oxide to promote the nucleation of the latter. The fast and uniform nucleation and formation of the layered oxide phase at relatively low temperatures were evidenced using solid-state nuclear magnetic resonance and in situ synchrotron X-ray diffraction. The resulting Ni-rich layered oxide cathode has fine primary particles, as visualized by three-dimensional tomography constructed using a focused-ion beam and scanning electron microscopy. The densely packed fine primary particles enable the excellent mechanical strength of the secondary particles, as demonstrated by in situ compression tests. This strategy provides a new approach for developing next-generation, high-strength battery materials.

Exclusive Co-N4 Sites Confined in Two-dimensional Metal-Organic Layers Enabling Highly Selective CO2 Electroreduction at Industrial-Level Current.

Metal-organic framework catalysts bring new opportunities for CO2 electrocatalysis. Herein, we first conduct density-functional theory calculations and predict that Co-based porphyrin porous organic layers (Co-PPOLs) exhibit good activity for CO2 conversion because of the low *CO adsorption energy at Co-N4 sites, which facilitates *CO desorption and CO formation. Then, we prepare two-dimensional Co-PPOLs with exclusive Co-N4 sites through a facile surfactant-assisted bottom-up method. The ultrathin feature ensures the exposure of catalytic centers. Together with large specific area, high electrical conductivity and CO2 adsorption capability, Co-PPOLs achieve a peak faradaic efficiency for CO production (FECO =94.2 %) at a moderate potential in CO2 electroreduction, accompanied with good stability. Moreover, Co-PPOLs reach an industrial-level current above 200 mA in a membrane electrode assembly reactor, and maintain near-unity CO selectivity (FECO >90 %) over 20 h in CO2 electrolysis.

[Investigation of the chemical components of Ciwujia injection using ultra-high performance liquid chromatography-quadrupole-electrostatic field orbitrap high-resolution mass spectrometry].

Ciwujia injection is commonly used to treat cerebrovascular and central nervous system diseases in clinical practice. It can significantly improve blood lipid levels and endothelial cell function in patients with acute cerebral infarction and promote the proliferation of neural stem cells in cerebral ischemic brain tissues. The injection has also been reported to have good curative effects on cerebrovascular diseases, such as hypertension and cerebral infarction. At present, the material basis of Ciwujia injection remains incompletely understood, and only two studies have reported dozens of components, which were determined using high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (HPLC-Q-TOF MS). Unfortunately, the lack of research on this injection restricts the in-depth study of its therapeutic mechanism.In the present study, a qualitative method based on ultra-high performance liquid chromatography-quadrupole-electrostatic field orbitrap high-resolution mass spectrometry (UHPLC-Q/Orbitrap HRMS) was developed to analyze the chemical components of Ciwujia injection. Separation was performed on a BEH Shield RP18 column (100 mm×2.1 mm, 1.7 µm) using 0.1% formic acid aqueous solution (A) and acetonitrile (B) as the mobile phases, and gradient elution was performed as follows: 0-2 min, 0%B; 2-4 min, 0%B-5%B; 4-15 min, 5%B-20%B; 15-15.1 min, 20%B-90%B; 15.1-17 min, 90%B. The flow rate and column temperature were set to 0.4 mL/min and 30 ℃ respectively. MS1 and MS2 data were acquired in both positive- and negative-ion modes using a mass spectrometer equipped with an HESI source. For data post-processing, a self-built library including component names, molecular formulas, and chemical structures was established by collecting information on the isolated chemical compounds of Acanthopanax senticosus. The chemical components of the injection were identified by comparison with standard compounds or MS2 data in commercial databases or literature based on precise relative molecular mass and fragment ion information. The fragmentation patterns were also considered. For example, the MS2 data of 3-caffeoylquinic acid (chlorogenic acid), 4-caffeoylquinic acid (cryptochlorogenic acid), and 5-caffeoylquinic acid (neochlorogenic acid) were first analyzed. The results indicated that these compounds possessed similar fragmentation behaviors, yielding product ions at m/z 173 and m/z 179 simultaneously. However, the abundance of the product ion at m/z 173 was much higher in 4-caffeoylquinic acid than in 5-caffeoylquinic acid or 3-caffeoylquinic acid, and the fragment signal at m/z 179 was much stronger for 5-caffeoylquinic acid than for 3-caffeoylquinic acid. Four caffeoylquinic acids were identified using a combination of abundance information and retention times. MS2 data in commercial database and literature were also used to identify unknown constituents. For example, compound 88 was successfully identified as possessing a relative molecular mass and neutral losses similar to those of sinapaldehyde using the database, and compound 80 was identified as salvadoraside because its molecular and fragmentation behaviors were consistent with those reported in the literature. A total of 102 constituents, including 62 phenylpropanoids, 23 organic acids, 7 nucleosides, 1 iridoid, and 9 other compounds, were identified. The phenylpropanoids can be further classified as phenylpropionic acids, phenylpropanols, benzenepropanals, coumarins, and lignans. Among the detected compounds, 16 compounds were confirmed using reference compounds and 65 compounds were identified in Ciwujia injection for the first time. This study is the first to report the feasibility of using the UHPLC-Q/Orbitrap HRMS method to quickly and comprehensively analyze the chemical components of Ciwujia injection. The 27 newly discovered phenylpropanoids provide further material basis for the clinical treatment of neurological diseases and new research targets for the in-depth elucidation of the pharmacodynamic mechanism of Ciwujia injection and its related preparations.

Correlation between the Human Development Index and the Incidence and Mortality of Non-Hodgkin Lymphoma.

OBJECTIVE: This study was to examine the relationship between socioeconomic status and the incidence and mortality of non-Hodgkin lymphoma (NHL). METHODS: We compared the age-standardized incidence rate (ASIR), age-standardized mortality rate (ASMR), and the ASMR to ASIR ratio (MIR) at national and regional levels and studied the correlation between the MIR and the human development index (HDI) in 2012 and 2018. RESULTS: The highest ASIR was in North America in 2012 and in Australia in 2018, and the lowest ASIR was in Central and South Asia in both 2012 and 2018. The highest ASMR was in North Africa in both 2012 and 2018, and the lowest ASMR was in Eastern Asia and South-Central Asia in 2012 and in South-Central Asia in 2018. The lowest MIR was in Australia in both 2012 and 2018, and the highest MIR was in Western Africa in both 2012 and 2018. HDI was strongly negatively correlated with MIR (r: -0.8810, P<0.0001, 2012; r: -0.8895, P<0.0001, 2018). Compared to the 2012 data, the MIR in the intermediate HDI countries significantly deceased and the HDI in low and high HDI countries significantly increased in 2018. CONCLUSION: The MIR is negatively correlated with HDI. Increasing the HDI in low and intermediate HDI countries may reduce the MIR and increase the survival of patients with NHL.

Regioselective Access to Vicinal Diamines by Metal-Free Photosensitized Amidylimination of Alkenes with Oxime Esters.

A metal-free photosensitized protocol for regioselective diamination of alkene feedstocks over a single step was developed based on the rationally designed bifunctional diamination reagent, thus affording a range of differentially protected 1,2-diamines in moderate to high yields. Mechanistic studies reveal that the reaction is initiated with a triplet-triplet energy transfer between thioxanthone catalyst and diamination reagent, followed by fragmentation to simultaneously generate long-lived iminyl radical and transient amidyl radical. The excellent regioselectivity presumably stems from the large reactivity difference between two different N-centered radical species. This protocol is characterized by excellent regioselectivity, broad functional group tolerance, and mild reaction conditions, which would enrich the diversity and versatility of facilitate the diversity-oriented synthesis of 1,2-diamine-containing complex molecule scaffolds.

Designed growth of large bilayer graphene with arbitrary twist angles.

The production of large-area twisted bilayer graphene (TBG) with controllable angles is a prerequisite for proceeding with its massive applications. However, most of the prevailing strategies to fabricate twisted bilayers face great challenges, where the transfer methods are easily stuck by interfacial contamination, and direct growth methods lack the flexibility in twist-angle design. Here we develop an effective strategy to grow centimetre-scale TBG with arbitrary twist angles (accuracy, <1.0°). The success in accurate angle control is realized by an angle replication from two prerotated single-crystal Cu(111) foils to form a Cu/TBG/Cu sandwich structure, from which the TBG can be isolated by a custom-developed equipotential surface etching process. The accuracy and consistency of the twist angles are unambiguously illustrated by comprehensive characterization techniques, namely, optical spectroscopy, electron microscopy, photoemission spectroscopy and photocurrent spectroscopy. Our work opens an accessible avenue for the designed growth of large-scale two-dimensional twisted bilayers and thus lays the material foundation for the future applications of twistronics at the integration level.

Dose-individualization Efficiently Maintains Sufficient Exposure to Methotrexate without Additional Toxicity in High-dose Methotrexate Regimens for Pediatric Acute Lymphoblastic Leukemia.

OBJECTIVE: Methotrexate (MTX) can be safely administered to most patients but may cause severe toxicity in others. This study aimed to summarize the characteristics of high-dose methotrexate (HD-MTX) chemotherapy and to evaluate whether the modified dose-adjustment program was able to improve the maintenance of sufficient MTX exposure levels while minimizing toxicities. METHODS: We evaluated 1172 cycles of high-dose MTX chemotherapy from 294 patients who were treated according to the CCCG-ALL-2015 protocol (clinical trial number: ChiCTR-IPR-14005706) and analyzed the data of actual MTX dosage, MTX concentration, toxicity, and prognosis. We compared data between the dose-adjustment Program 1 (fixed 20% reduction in dose) and the dose-adjustment Program 2 (dose-individualization based on reassessment of the creatine clearance rate and the MTX concentration-monitoring point at 16 h), which were applied if the MTX clearance was delayed in the previous cycle. RESULTS: The patients who used Program 2 had higher actual MTX infusion doses and infusion rates and were able to better maintain the MTX concentration at 44 h at the established target value than those on Program 1 (P<0.001). No significant differences in toxicities were found between these two programs except that abnormal serum potassium levels and prolonged myelosuppression in intermediate-risk/high-risk patients were more frequently observed in patients using Program 2 (P<0.001). No significant correlations were observed between the MTX dose, dose-adjustment programs, or MTX concentrations and relapse-free survival. CONCLUSION: Adjusting the MTX dose using Program 2 is more efficient for maintaining sufficient MTX exposure without significantly increasing the toxicity.

Visualizing the Anomalous Catalysis in Two-Dimensional Confined Space.

Confined nanospaces provide a new platform to promote catalytic reactions. However, the mechanism of catalytic enhancement in the nanospace still requires insightful exploration due to the lack of direct visualization. Here, we report operando investigations on the etching and growth of graphene in a two-dimensional (2D) confined space between graphene and a Cu substrate. We observed that the graphene layer between the Cu and top graphene layer was surprisingly very active in etching (more than 10 times faster than the etching of the top graphene layer). More strikingly, at a relatively low temperature (∼530 °C), the etched carbon radicals dissociated from the bottom layer, in turn feeding the growth of the top graphene layer with a very high efficiency. Our findings reveal the in situ dynamics of the anomalous confined catalytic processes in 2D confined spaces and thus pave the way for the design of high-efficiency catalysts.

Photoinduced Construction of a Benzothienopyridine-S,S-dioxide Framework Enabled by Polychloropyridyl Multifunctional Motifs.

Reported herein is a visible-light-induced, catalyst-free intramolecular cyclization of 4-phenylsulfonyl-2,3,5,6-tetrachloropyridine, leading to rapid assembly of a series of unprecedented benzo[4,5]thieno[3,2-c]pyridine 5,5-dioxide scaffolds under mild conditions. The rational introduction of a perchloropyridin-4-yl module significantly facilitated this photoinduced process and offers a versatile platform for broad structural variation. Mechanistic studies revealed that a newly identified charge-transfer complex with carbonate is crucial to this photoinduced process.

Large exciton binding energy, superior mechanical flexibility, and ultra-low lattice thermal conductivity in BiI3monolayer.

The exciton binding energy, mechanical properties, and lattice thermal conductivity of monolayer BiI3are investigated on the basis of first principle calculation. The excitation energy of monolayer BiI3is predicted to be 1.02 eV, which is larger than that of bulk BiI3(0.224 eV). This condition is due to the reduced dielectric screening in systems. The monolayer can withstand biaxial tensile strain up to 30% with ideal tensile strength of 2.60 GPa. Compared with graphene and MoS2, BiI3possesses superior flexibility and ductility due to its large Poisson's ratio and smaller Young's modulus by two orders of magnitude. The predicted lattice thermal conductivitykLof monolayer BiI3is 0.247 W m-1 K-1at room temperature, which is lower than most reported values for other 2D materials. Such ultralowkLresults from the scattering between acoustic and optical phonon modes, heavy atomic mass, and relatively weak chemical bond.

Visible-Light-Driven Sulfonation of α-Trifluoromethylstyrenes: Access to Densely Functionalized CF3-Substituted Tertiary Alcohol.

Reported herein is a visible-light-induced sulfonation of α-trifluoromethylstyrenes with sodium sulfinates, which provides a series of α-trifluoromethyl-ß-sulfonyl tertiary alcohols. This new synthetic protocol is enabled by a charge-transfer complex between oxygen and sulfinates, featuring broad substrate scope and scalability. Excellent functional group compatibility and chemoselectivity render this method suitable for sulfonation of pharmaceutically relevant molecules. In the presence of D2O, deuteriotrifluorinated products were also obtained, further demonstrating the flexibility and synthetic potentials of this strategy.