A five-coordinate iron(III) porphyrin complex including a neutral axial pyridine N-oxide ligand.

While six-coordinate iron(III) porphyrin complexes with pyridine N-oxides as axial ligands have been studied as they exhibit rare spin-crossover behavior, studies of five-coordinate iron(III) porphyrin complexes including neutral axial ligands are rare. A five-coordinate pyridine N-oxide-5,10,15,20-tetraphenylporphyrinate-iron(III) complex, namely (pyridine N-oxide-κO)(5,10,15,20-tetraphenylporphinato-κ4N,N',N'',N''')iron(III) hexafluoroantimonate(V) dichloromethane disolvate, [Fe(C44H28N4)(C5H5NO)][SbF6]·2CH2Cl2, was isolated and its crystal structure determined in the space group P-1. The porphyrin core is moderately saddled and the Fe-O-N bond angle is 122.08 (13)°. The average Fe-N bond length is 2.03 Šand the Fe-ONC5H5 bond length is 1.9500 (14) Å. This complex provides a rare example of a five-coordinate iron(III) porphyrin complex that is coordinated to a neutral organic ligand through an O-monodentate binding mode.

Ferromagnetic coupling in d(1)-d(3) linear oxido-bridged heterometallic complexes: ground-state models of metal-to-metal charge transfer excited states.

Convenient strategies have been developed to synthesize heterobi/trimetallic oxido complexes containing V(IV)-O-Cr(III), V(IV)-O-Cr(III)-O-Ti(IV) and V(IV)-O-Cr(III)-O-V(IV) cores. These compounds can serve as ground state models for probing the magnetic properties of metal-to-metal charge transfer excited states. Each of these complexes represents the first experimental demonstration of ferromagnetic coupling in a d(1)-d(3) oxido bridged compound, which confirms a long standing theoretical prediction for such a linkage. Structural characterization reveals a similar structure for each of the bi/trimetallic complexes with identical V[double bond, length as m-dash]O bond lengths (∼1.644 Å) and a linear V-O-Cr geometry. The Cr-O distances (1.943-1.964 Å) are significantly influenced by the ligands in the trans axial positions. Ferromagnetic coupling between the V(IV) and Cr(III) of V-O-Cr is measured by temperature-dependent magnetic susceptibility, showing J = +42.5 to +50.7 cm(-1) (H = -2JSVSCr). This is further supported by variable temperature X-band EPR. The values of J are found to be consistent with the function J = Ae(ßr) (A = 9.221 × 10(8) and ß = 8.607 Å(-1)), where r is the Cr-O bond distance. We propose a model that links either ferromagnetic or antiferromagentic exchange coupling with long excited state lifetimes in metal-to-metal charge transfer (MMCT) chromophores.

Synthesis, Characterization, and Antimicrobial Efficacy of Photomicrobicidal Cellulose Paper.

Toward our goal of scalable, antimicrobial materials based on photodynamic inactivation, paper sheets comprised of photosensitizer-conjugated cellulose fibers were prepared using porphyrin and BODIPY photosensitizers, and characterized by spectroscopic (infrared, UV-vis diffuse reflectance, inductively coupled plasma optical emission) and physical (gel permeation chromatography, elemental, and thermal gravimetric analyses) methods. Antibacterial efficacy was evaluated against Staphylococcus aureus (ATCC-2913), vancomycin-resistant Enterococcus faecium (ATCC-2320), Acinetobacter baumannii (ATCC-19606), Pseudomonas aeruginosa (ATCC-9027), and Klebsiella pneumoniae (ATCC-2146). Our best results were achieved with a cationic porphyrin-paper conjugate, Por((+))-paper, with inactivation upon illumination (30 min, 65 ± 5 mW/cm(2), 400-700 nm) of all bacterial strains studied by 99.99+% (4 log units), regardless of taxonomic classification. Por((+))-paper also inactivated dengue-1 virus (>99.995%), influenza A (∼ 99.5%), and human adenovirus-5 (∼ 99%). These results demonstrate the potential of cellulose materials to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.

Antiviral, Antifungal and Antibacterial Activities of a BODIPY-Based Photosensitizer.

Antimicrobial photodynamic inactivation (aPDI) employing the BODIPY-based photosensitizer 2,6-diiodo-1,3,5,7-tetramethyl-8-(N-methyl-4-pyridyl)-4,4'-difluoro-boradiazaindacene (DIMPy-BODIPY) was explored in an in vitro assay against six species of bacteria (eight total strains), three species of yeast, and three viruses as a complementary approach to their current drug-based or non-existent treatments. Our best results achieved a noteworthy 5-6 log unit reduction in CFU at 0.1 µM for Staphylococcus aureus (ATCC-2913), methicillin-resistant S. aureus (ATCC-44), and vancomycin-resistant Enterococcus faecium (ATCC-2320), a 4-5 log unit reduction for Acinetobacter baumannii ATCC-19606 (0.25 µM), multidrug resistant A. baumannii ATCC-1605 (0.1 µM), Pseudomonas aeruginosa ATCC-97 (0.5 µM), and Klebsiella pneumoniae ATCC-2146 (1 µM), and a 3 log unit reduction for Mycobacterium smegmatis mc2155 (ATCC-700084). A 5 log unit reduction in CFU was observed for Candida albicans ATCC-90028 (1 µM) and Cryptococcus neoformans ATCC-64538 (0.5 µM), and a 3 log unit reduction was noted for Candida glabrata ATCC-15545 (1 µM). Infectivity was reduced by 6 log units in dengue 1 (0.1 µM), by 5 log units (0.5 µM) in vesicular stomatitis virus, and by 2 log units (5 µM) in human adenovirus-5. Overall, the results demonstrate that DIMPy-BODIPY exhibits antiviral, antibacterial and antifungal photodynamic inactivation at nanomolar concentrations and short illumination times.

Synthesis of Unsupported d(1)-d(x) Oxido-Bridged Heterobimetallic Complexes Containing V(IV): A New Direction for Metal-to-Metal Charge Transfer.

Heterobimetallic complexes composed only of first-row transition metals [(TMTAA)V(IV)═O→M(II)Py5Me2](OTf)2 (TMTAA = 7,16-dihydro-6,8,15,17-tetramethyldibenzo[b,i][1,4,8,11]tetraazacyclotetradecine; Py5Me2 = 2,6-bis(1,1-bis(2-pyridyl)ethyl)pyridine; M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II); OTf = trifluoromethanesulfonate) have been synthesized through a dative interaction between a terminal oxido and M(II) metal centers. This is the first series of V(IV)═O→M(II) heterobimetallic complexes containing an unsupported oxido bridge. Among these five complexes, only V(IV)═O→Fe(II) (3b) has a clear new absorption band upon formation of the dinuclear species (502 nm, ε = 1700 M(-1) cm(-1)). This feature is assigned to a metal-to-metal charge transfer (MMCT) transition from V(IV) to Fe(II), which forms a V(V)-O-Fe(I) excited state. This assignment is supported by electrochemical data, electronic absorption profiles, and resonance Raman spectroscopy and represents the first report of visible-light induced MMCT in a heterobimetallic oxido-bridged molecule where the electron originates on a d(1) metal center.

Isolation of a (dinitrogen)tricopper(I) complex.

Reaction of a tris(ß-diketimine) cyclophane, H3L, with benzyl potassium followed by [Cu(OTf)]2(C6H6) affords a tricopper(I) complex containing a bridging dinitrogen ligand. rRaman (νN-N = 1952 cm(-1)) and (15)N NMR (δ = 303.8 ppm) spectroscopy confirm the presence of the dinitrogen ligand. DFT calculations and QTAIM analysis indicate minimal metal-dinitrogen back-bonding with only one molecular orbital of significant N2(2pπ*) and Cu(3dπ)/Cu(3dσ) character (13.6% N, 70.9% Cu). ∇(2)ρ values for the Cu-N2 bond critical points are analogous to those for polar closed-shell/closed-shell interactions.

Light-driven hydrogen evolution by BODIPY-sensitized cobaloxime catalysts.

We report four photocatalytically active cobaloxime complexes for light-driven hydrogen evolution. The cobaloxime catalysts are sensitized by different meso-pyridyl boron dipyrromethene (BODIPY) chromophores, bearing either two bromo- or iodo-substituents on the BODIPY core. The pyridine linker between the BODIPY and cobaloxime is further modified by a methyl substituent on the pyridine, influencing the stability and electronic properties of the cobaloxime catalyst and thus the photocatalytic efficiency of each system. Four cobaloxime catalyst complexes and three novel BODIPY chromophores are synthesized and characterized by absorption, fluorescence, infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry, and electrochemistry. Crystal structures for the BODIPY-cobaloxime complexes 2 and 3 are presented. In contrast to the photocatalytically inactive, nonhalogenated reference complex 1, the four newly reported molecules are active for photocatalytic hydrogen evolution, with a maximum turnover number (TON) of 30.9 mol equiv of H2 per catalyst for the meso-methylpyridyl 2,6-diiodo BODIPY-sensitized cobaloxime complex 5. We conclude that accessing the photoexcited triplet state of the BODIPY chromophore by introducing heavy atoms (i.e., bromine or iodine) is necessary for efficient electron transfer in this system, enabling catalytic hydrogen generation. In addition, relatively electron-donating pyridyl linkers improve the stability of the complex, increasing the overall TON for hydrogen production.

Synthesis, characterization and structural investigation of novel meso-pyridyl BODIPY-cobaloxime complexes.

We report the synthesis of four boron-dipyrromethene (BODIPY) sensitized cobaloxime complexes as structural models of light-driven proton reduction catalysts. The BODIPY chromophore is covalently linked to the cobaloxime via a pyridine molecule in the meso-position of the BODIPY. Electron withdrawing or donating substituents on the pyridine (e.g. chloro- or methyl-groups) allow a comparison of the influence of these substituents on cobaloxime-BODIPY interactions. This includes altering the overall stability of the complexes and tuning the catalytically relevant Co(II/III) redox couple over a range of 220 mV, which will assist in the design of future cobaloxime-chromophore complexes. All complexes were characterized using electrochemistry, electronic absorption and fluorescence spectroscopy. Additionally, we present crystal structures of the four new BODIPY-cobaloxime complexes and elucidate the influence of the structural modifications. We found that these compounds produce sub-stoichiometric quantities of hydrogen under standard photon-driven hydrogen evolving conditions.

Direct observation of a hydroperoxide surface intermediate upon visible light-driven water oxidation at an Ir oxide nanocluster catalyst by rapid-scan FT-IR spectroscopy.

A surface hydroperoxide intermediate has been detected upon oxidation of water at an Ir oxide nanocluster catalyst system under pulsed excitation of a [Ru(bpy)(3)](2+) visible light sensitizer by recording of the OO vibrational mode at 830 cm(-1). Rapid-scan FT-IR spectroscopy of colloidal H(2)O, D(2)O, and D(2)(18)O solutions in the attenuated total reflection mode allowed spectral assignment of IrOOH on the basis of an observed D shift of 30 cm(-1), and (18)O shifts of 24 cm(-1) ((16)O(18)O) and 46 cm(-1) ((18)O(18)O). The laser pulse response of the infrared band is consistent with the kinetic relevancy of the intermediate. This is the first observation of a surface intermediate of oxygen evolution at an Ir oxide multielectron catalyst.

Binuclear TiOMn charge-transfer chromophore in mesoporous silica.

An all-inorganic heterobinuclear chromophore consisting of Ti(IV) oxo-bridged to a Mn(II) center has been assembled on the surface of silica pores of MCM-41 material. The key step of covalent attachment on the pore surface is the reaction of a Mn(II) precursor featuring weakly held CH3CN ligands with the OH group of a previously anchored titanol site. The optical diffuse reflectance spectrum reveals a Ti(IV)OMn(II) --> Ti(III)OMn(III) metal-to-metal charge-transfer (MMCT) absorption extending from the UV throughout to visible into the red spectral region. FT-IR, FT-Raman and optical spectroscopy confirm that the material is free of Mn oxide clusters, while EPR and Mn K-edge X-ray absorption spectra indicate that the donor center is predominantly in oxidation state +2. In situ FT-IR spectroscopy allowed detection of visible light-induced redox chemistry of the MMCT unit using O2 (18O2) and methanol as acceptor and donor probe molecules, respectively. Formate and water were observed as primary products, with methyl formate emerging as a secondary condensation product. The observed photochemistry demonstrates that excitation of the Ti(IV)OMn(II) --> Ti(III)OMn(III) results in complete transfer of an electron from donor to acceptor center, with the charge separation sufficiently long lived for initiation of redox chemistry to occur. With donor and acceptor redox potentials appropriate for driving multi-electron catalysts for water oxidation, proton or CO2 reduction, the TiOMn(II) unit is an attractive candidate as a charge-transfer chromophore in a solar fuel generating system.

Visible light-induced electron transfer from di-mu-oxo-bridged dinuclear Mn complexes to Cr centers in silica nanopores.

The compound (bpy) 2Mn (III)(mu-O) 2Mn (IV)(bpy) 2, a structural model relevant for the photosynthetic water oxidation complex, was coupled to single Cr (VI) charge-transfer chromophores in the channels of the nanoporous oxide AlMCM-41. Mn K-edge EXAFS spectroscopy confirmed that the di-mu-oxo dinuclear Mn core of the complex is unaffected when loaded into the nanoscale pores. Observation of the 16-line EPR signal characteristic of Mn (III)(mu-O) 2Mn (IV) demonstrates that the majority of the loaded complexes retained their nascent oxidation state in the presence or absence of Cr (VI) centers. The FT-Raman spectrum upon visible light excitation of the Cr (VI)-O (II) --> Cr (V)-O (I) ligand-to-metal charge transfer reveals electron transfer from Mn (III)(mu-O) 2Mn (IV) (Mn-O stretch at 700 cm (-1)) to Cr (VI), resulting in the formation of Cr (V) and Mn (IV)(mu-O) 2Mn (IV) (Mn-O stretch at 645 cm (-1)). All initial and final states are directly observed by FT-Raman or EPR spectroscopy, and the assignments are corroborated by X-ray absorption spectroscopy measurements. The endoergic charge separation products (Delta E o = -0.6 V) remain after several minutes, which points to spatial separation of Cr (V) and Mn (IV)(mu-O) 2Mn (IV) as a consequence of hole (O (I)) hopping as a major contributing mechanism. This is the first observation of visible light-induced oxidation of a potential water oxidation complex by a metal charge-transfer pump in a nanoporous environment. These findings will allow for the assembly and photochemical characterization of well-defined transition metal molecular units, with the ultimate goal of performing endothermic, multielectron transformations that are coupled to visible light electron pumps in nanostructured scaffolds.

Synthesis of molybdenum complexes that contain "hybrid" triamidoamine ligands, [(hexaisopropylterphenyl-NCH2CH2)2NCH2CH2N-aryl]3-, and studies relevant to catalytic reduction of dinitrogen.

In the Buchwald-Hartwig reaction between HIPTBr (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = hexaisopropylterphenyl) and (H2NCH2CH2)3N, it is possible to obtain a 65% isolated yield of (HIPTNHCH2CH2)2NCH2CH2NH2. A second coupling then can be carried out to yield a variety of "hybrid" ligands, (HIPTNHCH2CH2)2NCH2CH2NHAr, where Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, 3,5-(MeO)2C6H3, 3,5-Me2NC5H3, 3,5-Ph2NC5H3, 2,4,6-i-Pr3C6H2, or 2,4,6-Me3C6H2. The hybrid ligands may be attached to Mo to yield [hybrid]MoCl species. From the monochloride species, a variety of other species such as [hybrid]MoN, {[hybrid]MoN2}Na, and {[hybrid]Mo(NH3)}+ can be prepared. [Hybrid]MoN2 species were prepared through oxidation of {[hybrid]MoN2}Na species with ZnCl2, but they could not be isolated. [Hybrid]Mo=N-NH species could be observed as a consequence of the protonation of {[hybrid]MoN2}- species, but they too could not be isolated as a consequence of a facile decomposition to yield dihydrogen and [hybrid]MoN2 species. Attempts to reduce dinitrogen catalytically led to little or no ammonia being formed from dinitrogen. The fact that no ammonia was formed from dinitrogen in the case of Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, or 3,5-(MeO)2C6H3 could be attributed to a rapid decomposition of intermediate [hybrid]Mo=N-NH species in the catalytic reaction, a decomposition that was shown in separate studies to be accelerated dramatically by 2,6-lutidine, the conjugate base of the acid employed in the attempted catalytic reduction. X-ray structures of [(HIPTNHCH2CH2)2NCH2CH2N{3,5-(CF3)2C6H3}]MoCl and [(HIPTNHCH2CH2)2NCH2CH2N(3,5-Me2C6H3)]MoN2}Na(THF)2 are reported.

Synthesis of [(HIPTNCH2CH2)3N]V compounds (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) and an evaluation of vanadium for the reduction of dinitrogen to ammonia.

Green [HIPTN3N]V(THF) ([HIPTN3N]3- = [(HIPTNCH2CH2)3N]3-, where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) can be prepared in a 70-80% yield via the addition of H3[HIPTN3N] to VCl3(THF)3 in THF, followed by the addition of LiN(SiMe3)2. From [HIPTN3N]V(THF), the following have been prepared: {[HIPTN3N]VN2}K, [HIPTN3N]V(NH3), [HIPTN3N]V=NH, [HIPTN3N]V=NSiMe3, [HIPTN3N]V=O, [HIPTN3N]V=S, and [HIPTN3N]V(CO). No ammonia is formed from dinitrogen using {[HIPTN3N]VN2}K, [HIPTN3N]V=NH, or [HIPTN3N]V(NH3) as the initial species under conditions that were successful in the analogous [HIPTN3N]Mo system. X-ray structural studies are reported for [HIPTN3N]V(THF) and [HIPTN3N]V(NH3).

Catalytic reduction of dinitrogen to ammonia at a single molybdenum center.

Since our discovery of the catalytic reduction of dinitrogen to ammonia at a single molybdenum center, we have embarked on a variety of studies designed to further understand this complex reaction cycle. These include studies of both individual reaction steps and of ligand variations. An important step in the reaction sequence is exchange of ammonia for dinitrogen in neutral molybdenum(III) compounds. We have found that this exchange reaction is first order in dinitrogen and relatively fast (complete in <1 h) at 1 atm of dinitrogen. Variations of the terphenyl substituents in the triamidoamine ligand demonstrate that the original ligand is not unique in its ability to yield successful catalysts. However, complexes that contain sterically less demanding ligands fail to catalyze formation of ammonia from dinitrogen; it is proposed as a consequence of a base-catalyzed decomposition of a diazenido (Mo-N=NH) intermediate.

Synthesis of [(HIPTNCH2CH2)3N]Cr Compounds (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) and an evaluation of chromium for the reduction of dinitrogen to ammonia.

Red-black [HIPTN3N]Cr (1) ([HIPTN3N]3- = [(HIPTNCH2CH2)3N]3- where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = HexaIsoPropylTerphenyl) can be prepared from CrCl3, while green-black [HIPTN3N]Cr(THF) (2) can be prepared from CrCl3(THF)3. Reduction of {1|2} (which means either 1 or 2) with potassium graphite in ether at room temperature yields [HIPTN3N]CrK (3) as a yellow-orange powder. There is no evidence that dinitrogen is incorporated into 1, 2, or 3. Compounds that can be prepared readily from {1|2} include red [HIPTN3N]CrCO (4), blood-red [HIPTN3N]CrNO (6), and purple [HIPTN3N]CrCl (7, upon oxidation of {1|2} with AgCl). The dichroic (purple/green) Cr(VI) nitride, [HIPTN3N]CrN (8) was prepared from Bu4NN3 and 7. X-ray studies have been carried out on 4, 6, and 7, and on two co-crystallized compounds, 7 and [HIPTN3N]CrN3 (65:35) and [HIPTN3N]CrN3 and 8 (50:50). Exposure of a degassed solution of {1|2} to an atmosphere of ammonia does not yield "Cr(NH3)" as a stable and well-behaved species analogous to Mo(NH3). An attempt to reduce dinitrogen under conditions described for the catalytic reduction of dinitrogen by [HIPTN3N]Mo compounds with 8 yielded a substoichiometric amount (0.8 equiv) of ammonia, which suggests that some ammonia is formed from the nitride but none is formed from dinitrogen.

Molybdenum triamidoamine complexes that contain hexa-tert-butylterphenyl, hexamethylterphenyl, or p-bromohexaisopropylterphenyl substituents. An examination of some catalyst variations for the catalytic reduction of dinitrogen.

Three new tetramines, (ArNHCH(2)CH(2))(3)N, have been synthesized in which Ar = 3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3) (H(3)[HTBTN(3)N]), 3,5-(2,4,6-Me(3)C(6)H(2))(2)C(6)H(3) (H(3)[HMTN(3)N]), or 4-Br-3,5-(2,4,6-i-Pr(3)C(6)H(2))(2)C(6)H(2) (H(3)[pBrHIPTN(3)N]). The diarylated tetramine, [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(2), has also been isolated, and the "hybrid" tetramine [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(4-t-BuC(6)H(4)) has been prepared from it. Monochloride complexes, [(TerNCH(2)CH(2))(3)N]MoCl, have been prepared, as well as a selection of intermediates that would be expected in a catalytic dinitrogen reduction such as [(TerNCH(2)CH(2))(3)N]Mo[triple bond]N and [[(TerNCH(2)CH(2))(3)N]Mo(NH(3))][BAr'(4)] (Ter = HTBT, HMT, or pBrHIPT and Ar' = 3,5-(CF(3))(2)C(6)H(3))). Intermediates that contain the new terphenyl-substituted ligands are then evaluated for their efficiency for the catalytic reduction of dinitrogen under conditions where analogous [HIPTN(3)N]Mo species give four turnovers to ammonia under "standard" conditions with an efficiency of approximately 65%. Only [pBrHIPTN(3)N]Mo compounds are efficient catalysts for dinitrogen reduction. The reasons are explored and discussed.