ABSTRACT
As a component of many intelligence test batteries, figural matrices tests are an effective way to assess reasoning, which is considered a core ability of intelligence. Traditionally, the sum of correct items is used as a performance indicator (total solution procedure). However, recent advances in the development of computer-based figural matrices tests allow additional indicators to be considered for scoring. In two studies, we focused on the added value of a partial solution procedure employing log file analyses from a computer-based figural matrices test. In the first study (n = 198), we explored the internal validity of this procedure by applying both an exploratory bottom-up approach (using sequence analyses) and a complementary top-down approach (using rule jumps, an indicator taken from relevant studies). Both approaches confirmed that higher scores in the partial solution procedure were associated with higher structuredness in participants' response behavior. In the second study (n = 169), we examined the external validity by correlating the partial solution procedure in addition to the total solution procedure with a Grade Point Average (GPA) criterion. The partial solution procedure showed an advantage over the total solution procedure in predicting GPA, especially at lower ability levels. The implications of the results and their applicability to other tests are discussed.
ABSTRACT
OBJECTIVE: The aim of this study is to evaluate the effects of a seat-integrated mobilization system on motion activity, muscle stiffness and discomfort during prolonged driving. METHOD: During a 4.5-h driving task, motion activity, muscle stiffness and discomfort (measured subjectively and objectively) of long-haul truck drivers were determined and compared intra-individually in a test condition with mobilization (seat-integrated stimulation) and a control condition under standardized conditions in a simulated driving study (N = 16). RESULTS: In the experimental condition, participants showed a significantly increased motion activity and a reduced muscle stiffness compared to the control condition. Furthermore, discomfort occurred significantly more frequently in the control condition. CONCLUSION: The mobilization system increased motion activity and reduced discomfort as well as muscle stiffness. Therefore, it provides considerable potential to counteract negative effects of prolonged sitting and to promote truck driver's health.
Subject(s)
Automobile Driving , Humans , Equipment Design , Motor Vehicles , MusclesABSTRACT
In the pursuit for future mobility, solid-state batteries open a wide field of promising battery concepts with a variety of advantages, ranging from energy density to power capability. However, trade-offs need to be addressed, especially for large-scale, cost-effective processing, which implies the use of a polymeric binder in the composite electrodes. Here, we investigate three-dimensional microstructure models of the active material, solid electrolyte, and binder to link cathode design and binder content with electrode performance. Focusing on lithium-ion transport, we evaluate the effective ionic conductivity and tortuosity in a flux-based simulation. Therein, we address the influence of electrode composition and active material particle size as well as the process-controlled design parameters of the void space and binder content. Even though added in small amounts, the latter has a strong negative influence on the ion transport paths and the active surface area. The simulation of ion transport within four-phase composites is supplemented by an estimation of the limiting current densities, illustrating that application-driven cell design starts at the microstructure level.
ABSTRACT
Advanced lithium-ion batteries are of great interest for consumer electronics and electric vehicle applications; however, they still suffer from drawbacks stemming from cathode active material limitations (e.g., insufficient capacities and capacity fading). One approach for alleviating such limitations and stabilizing the active material structure may be anion doping. In this work, fluorine and nitrogen are investigated as potential dopants in Li1.02(Ni0.8Co0.1Mn0.1)0.98O2 (NCM) as a prototypical nickel-rich cathode active material. Nitrogen doping is achieved by ammonia treatment of NCM in the presence of oxygen, which serves as an unconventional and new approach. The crystal structure was investigated by means of Rietveld and pair distribution function analysis of X-ray diffraction data, which provide very precise information regarding both the average and local structure, respectively. Meanwhile, time-of-flight secondary-ion mass spectroscopy was used to assess the efficacy of dopant incorporation within the NCM structure. Moreover, scanning electron microscopy and scanning transmission electron microscopy were conducted to thoroughly investigate the dopant influences on the NCM morphology. Finally, the electrochemical performance was tested via galvanostatic cycling of half- and full-cells between 0.1 and 2 C. Ultimately, a dopant-dependent modulation of the NCM structure was found to enable the enhancement of the electrochemical performance, thereby opening a route to cathode active material optimization.
ABSTRACT
Vascularization is essential for the regeneration of bone tissue within composite material. We measured the effect of regioselectively modified cellulose/hemicellulose as an additive for porous scaffolds of collagen/hydroxyapatite nanocomposite on the tubule formation of human vascular endothelial cells. Using a coculture of endothelial cells and fibroblasts, endothelial cells formed a network of tubules within an incubation time of 14 to 24 days. A cellulose sulfate with irregular sulfation pattern along the polysaccharide backbone (13-TACS-01) led to an additional increase in vascular endothelial growth factor (VEGF)-induced tubule formation, as observed in an in vitro angiogenesis assays. In contrast with structurally different heparin, these cellulose sulfates have no apparent affinity to VEGF. Their impact on endothelial function may possibly be due to interactions with cell surface receptors/soluble factors not yet defined.
Subject(s)
Biomimetics , Bone Matrix/chemistry , Cellulose/chemistry , Durapatite/chemistry , Neovascularization, Physiologic/physiology , Sulfates/chemistry , Cells, Cultured , Fibroblasts/cytology , Fibroblasts/physiology , Human Umbilical Vein Endothelial Cells/cytology , Human Umbilical Vein Endothelial Cells/physiology , Humans , In Vitro Techniques , Vascular Endothelial Growth Factor A/metabolismABSTRACT
Angiogenesis plays an important role in both soft and hard tissue regeneration, which can be modulated by therapeutic drugs. If nanoparticles (NP) are used as vectors for drug delivery, they have to encounter endothelial cells (EC) lining the vascular lumen, if applied intravenously. Herein the interaction of unloaded polyelectrolyte complex nanoparticles (PECNP) composed of cationic poly(l-lysine) (PLL) and various anionic polysaccharides with human vascular endothelial cells (HUVEC) was analyzed. In particular PECNP were tested for their cell adhesive properties, their cellular uptake and intracellular localization considering composition and net charge. PECNP may form a platform for both cell coating and drug delivery. PECNP, composed of PLL in combination with the polysaccharides dextran sulfate (DS), cellulose sulfate (CS) or heparin (HEP), either unlabeled or labeled with fluorescein isothiocyanate (FITC) and either with positive or negative net charge were prepared. PECNP were applied to human umbilical cord vein endothelial cells (HUVEC) in both, the volume phase and immobilized phase at model substrates like tissue culture dishes. The attachment of PECNP to the cell surface, their intracellular uptake, and effects on cell proliferation and growth behavior were determined. Immobilized PECNP reduced attachment of HUVEC, most prominently the systems PLL/HEP and PLL/DS. A small percentage of immobilized PECNP was taken up by cells during adhesion. PECNP in the volume phase showed no effect of the net charge sign and only minor effects of the composition on the binding and uptake of PECNP at HUVEC. PECNP were stored in endosomal vesicles in a cumulative manner without apparent further processing. During mitosis, internalized PECNP were almost equally distributed among the dividing cells. Both, in the volume phase and immobilized at the surface, PECNP composed of PLL/HEP and PLL/DS clearly reduced cell proliferation of HUVEC, however without an apparent cytotoxic effect, while PLL/CS composition showed minor impairment. PECNP have an anti-adhesive effect on HUVEC and are taken up by endothelial cells which may negatively influence the proliferation rate of HUVEC. The negative effects were less obvious with the composition PLL/CS. Since uptake and binding for PLL/HEP was more efficient than for PLL/DS, PECNP of PLL/HEP may be used to deliver growth factors to endothelial cells during vascularization of bone reconstitution material, whereas those of PLL/CS may have an advantage for substituting biomimetic bone scaffold material.
ABSTRACT
Li1+ xAl xGe2- x(PO4)3 (LAGP) is a solid lithium-ion conductor belonging to the NASICON family, representing the solid solution of LiGe2(PO4)3 and AlPO4. The typical syntheses of LAGP either involve high-temperature melt-quenching, which is complicated and expensive, or a sol-gel process requiring costly organic germanium precursors. In this work, we report a simple method based on aqueous solutions without the need of ethoxide precursors. Using synchrotron and neutron diffraction, the crystal structure, the occupancies for Al and Ge, and the distribution of lithium were determined. Substitution of germanium by aluminum allows for an increased Li+ incorporation in the material and the actual Li+ content in the sample increases with the nominal Li+ content and a solubility limit is observed for higher aluminum content. By means of impedance spectroscopy, an increase in the ionic conductivity with increasing lithium content is observed. Whereas the lithium ionic conductivity improves, due to the increasing carrier density, the bulk activation energy increases. This correlation suggests that changes in the transport mechanism and correlated motion may be at play in the Li1+ xAl xGe2- x(PO4)3 solid solution.
ABSTRACT
All-solid-state batteries (SSBs) have recently attracted much attention due to their potential application in electric vehicles. One key issue that is central to improve the function of SSBs is to gain a better understanding of the interfaces between the material components toward enhancing the electrochemical performance. In this work, the interfacial properties of a carbon-containing cathode composite, employing Li10GeP2S12 as the solid electrolyte, are investigated. A large interfacial charge-transfer resistance builds up upon the inclusion of carbon in the composite, which is detrimental to the resulting cycle life. Analysis by X-ray photoelectron spectroscopy reveals that carbon facilitates faster electrochemical decomposition of the thiophosphate solid electrolyte at the cathode/solid electrolyte interface-by transferring the low chemical potential of lithium in the charged state deeper into the solid electrolyte and extending the decomposition region. The occurring accumulation of highly oxidized sulfur species at the interface is likely responsible for the large interfacial resistances and aggravated capacity fading observed.
ABSTRACT
Blue-colored molybdenum oxide nitrides of the Mo2(O,N,â¡)5 type were synthesized by direct nitridation of commercially available molybdenum trioxide with a mixture of gaseous ammonia and oxygen. Chemical composition, crystal structure, and stability of the obtained and hitherto unknown compounds are studied extensively. The average oxidation state of +5 for molybdenum is proven by Mo K near-edge X-ray absorption spectroscopy; the magnetic behavior is in agreement with compounds exhibiting MoVO6 units. The new materials are stable up to â¼773 K in an inert gas atmosphere. At higher temperatures, decomposition is observed. X-ray and neutron powder diffraction, electron diffraction, and high-resolution transmission electron microscopy reveal the structure to be related to VNb9O24.9-type phases, however, with severe disorder hampering full structure determination. Still, the results demonstrate the possibility of a future synthesis of the potential binary oxide Mo2O5. On the basis of these findings, a tentative suggestion on the crystal structure of the potential compound Mo2O5, backed by electronic-structure and phonon calculations from first principles, is given.
ABSTRACT
Inspired by the ongoing search for new superionic lithium thiophosphates for use in solid-state batteries, we present the synthesis and structural characterization of Li2P2S6, a novel crystalline lithium thiophosphate. Whereas M2P2S6 with the different alkaline elements (M = Na, K, Rb, Cs) is known, the lithium counterpart has not been reported yet. Herein, we present a combination of synchrotron pair distribution function analysis and neutron powder diffraction to elucidate the crystal structure and possible Li+ diffusion pathways of Li2P2S6. Additionally, impedance spectroscopy is used to evaluate its ionic conductivity. We show that Li2P2S6 possesses P2S62- polyhedral units with edge-sharing PS4 tetrahedra and only one-dimensional diffusion pathways with localized Li-Li pairs, leading to a low ionic conductivity for lithium.
ABSTRACT
All-solid-state lithium-ion batteries have the potential to become an important class of next-generation electrochemical energy storage devices. However, for achieving competitive performance, a better understanding of the interfacial processes at the electrodes is necessary for optimized electrode compositions to be developed. In this work, the interfacial processes between the solid electrolyte (Li10GeP2S12) and the electrode materials (In/InLi and LixCoO2) are monitored using impedance spectroscopy and galvanostatic cycling, showing a large resistance contribution and kinetic hindrance at the metal anode. The effect of different fractions of the solid electrolyte in the composite cathodes on the rate performance is tested. The results demonstrate the necessity of a carefully designed composite microstructure depending on the desired applications of an all-solid-state battery. While a relatively low mass fraction of solid electrolyte is sufficient for high energy density, a higher fraction of solid electrolyte is required for high power density.
ABSTRACT
The interfacial stability of solid electrolytes at the electrodes is crucial for an application of all-solid-state batteries and protected electrodes. For instance, undesired reactions between sodium metal electrodes and the solid electrolyte form charge transfer hindering interphases. Due to the resulting large interfacial resistance, the charge transfer kinetics are altered and the overvoltage increases, making the interfacial stability of electrolytes the limiting factor in these systems. Driven by the promising ionic conductivities of Na3PS4, here we explore the stability and viability of Na3PS4 as a solid electrolyte against metallic Na and compare it to that of Na-ßâ³-Al2O3 (sodium ß-alumina). As expected, Na-ßâ³-Al2O3 is stable against sodium, whereas Na3PS4 decomposes with an increasing overall resistance, making Na-ßâ³-Al2O3 the electrolyte of choice for protected sodium anodes and all-solid-state batteries.
ABSTRACT
The discharging and charging of batteries require ion transfer across phase boundaries. In conventional lithium-ion batteries, Li(+) ions have to cross the liquid electrolyte and only need to pass the electrode interfaces. Future high-energy batteries may need to work as hybrids, and so serially combine a liquid electrolyte and a solid electrolyte to suppress unwanted redox shuttles. This adds new interfaces that might significantly decrease the cycling-rate capability. Here we show that the interface between a typical fast-ion-conducting solid electrolyte and a conventional liquid electrolyte is chemically unstable and forms a resistive solid-liquid electrolyte interphase (SLEI). Insights into the kinetics of this new type of interphase are obtained by impedance studies of a two-chamber cell. The chemistry of the SLEI, its growth with time and the influence of water impurities are examined by state-of-the-art surface analysis and depth profiling.
ABSTRACT
Since 1986 medical students at the University Children's Hospital Essen are trained as peers in a two week intensive course in order to teach basic paediatric examination techniques to younger students. Student peers are employed by the University for one year. Emphasis of the peer teaching program is laid on the mediation of affective and sensomotorical skills e.g. get into contact with parents and children, as well as manual paediatric examination techniques. The aim of this study is to analyse whether student peers are able to impart specific paediatric examination skills as good as an experienced senior paediatric lecturer. 123 students were randomly assigned to a group with either a senior lecturer or a student peer teacher. Following one-hour teaching-sessions in small groups students had to demonstrate the learned skills in a 10 minute modified OSCE. In comparison to a control group consisting of 23 students who never examined a child before, both groups achieved a significantly better result. Medical students taught by student peers almost reached the same examination result as the group taught by paediatric teachers (21,7±4,1 vs. 22,6±3,6 of 36 points, p=0,203). Especially the part of the OSCE where exclusively practical skills where examined revealed no difference between the two groups (7,44±2,15 vs. 7,97±1,87 of a maximum of 16 points, p=0,154). The majority of students (77%) evaluated peer teaching as stimulating and helpful. The results of this quantitative teaching study reveal that peer teaching of selected skills can be a useful addition to classical paediatric teaching classes.
Subject(s)
Education, Medical/methods , Models, Educational , Pediatrics/education , Peer Group , Adult , Attitude of Health Personnel , Clinical Competence , Curriculum , Educational Measurement , Faculty, Medical , Female , Germany , Hospitals, Pediatric , Humans , Infant, Newborn , Male , Neonatology/education , Students, Medical/psychology , Young AdultABSTRACT
Xenopus paraxial protocadherin (PAPC) regulates cadherin-mediated cell adhesion and promotes the planar cell polarity (PCP) pathway. Here we report that PAPC functions in the Xenopus gastrula as an inhibitor of the Wnt/ß-catenin pathway. The intracellular domain of PAPC interacts with casein kinase 2 beta (CK2ß), which is part of the CK2 holoenzyme. The CK2α/ß complex stimulates Wnt/ß-catenin signalling, and the physical interaction of CK2ß with PAPC antagonizes this activity. By this mechanism, PAPC restricts the expression of Wnt target genes during gastrulation. These experiments identify a novel function of protocadherins as regulators of the Wnt pathway.
Subject(s)
Cadherins/metabolism , Casein Kinase II/metabolism , Wnt Signaling Pathway , Xenopus Proteins/metabolism , Xenopus/metabolism , Animals , Cadherins/chemistry , Models, Biological , Protein Binding , Protein Structure, Tertiary , Protocadherins , Up-Regulation , Xenopus/embryology , Xenopus Proteins/chemistryABSTRACT
A central feature of Niemann-Pick Type C (NPC) disease is sequestration of cholesterol and glycosphingolipids in lysosomes. A large phenotypic variability, on both a clinical as well as a molecular level, challenges NPC diagnosis. For example, substantial difficulties in identifying or excluding NPC in a patient exist in cases with a "variant" biochemical phenotype, where cholesterol levels in cultured fibroblasts, the primary diagnostic indicator, are only moderately elevated. Here we apply quantitative microscopy as an accurate and objective diagnostic tool to measure cholesterol accumulation at the level of single cells. When employed to characterize cholesterol enrichment in fibroblasts from 20 NPC patients and 11 controls, considerable heterogeneity became evident both within the population of cells cultured from one individual as well as between samples from different probands. An obvious correlation between biochemical phenotype and clinical disease course was not apparent from our dataset. However, plasma levels of HDL-cholesterol (HDL-c) tended to be in the normal range in patients with a "variant" as opposed to a "classic" biochemical phenotype. Attenuated lysosomal cholesterol accumulation in "variant" cells was associated with detectable NPC1 protein and residual capability to upregulate expression of ABCA1 in response to LDL. Taken together, our approach opens perspectives not only to support diagnosis, but also to better characterize mechanisms impacting cholesterol accumulation in NPC patient-derived cells.