Effective Separation of Human Milk Glycosides using Carbon Dioxide Supercritical Fluid Chromatography.

Carbohydrate purification remains problematic due to the intrinsic diversity of structural isomers present in nature. Although liquid chromatography-based techniques are suitable for analyzing or preparing most glycan structures acquired either from natural sources or through chemical or enzymatic synthesis, the separation of regioisomers or linkage isomers with a clear resolution remains challenging. Herein, a carbon dioxide supercritical fluid chromatography (SFC) method was devised to resolve 18 human milk glycosides: oligomers (disaccharides to hexasaccharides), fucosylated regioisomers (lacto-N-fucopentaose I, III, and V; lacto-N-neofucopentaose V; lacto-N-difucohexaose III; blood group H1 antigen; and TF-LNnT), and connectivity isomers (lacto-N-tetraose/lacto-N-neotetraose and para-lacto-N-hexaose/para-lacto-N-neohexaose/type-1 hexasaccharide). The analysis of these glycosides represents a major limitation associated with conventional carbohydrate analysis. The unprecedented resolution achieved by the SFC method indicates the suitability of this key technology for revealing complex human milk glycomes.

Electrochemical Hydroxylation of C3-C12 n-Alkanes by Recombinant Alkane Hydroxylase (AlkB) and Rubredoxin-2 (AlkG) from Pseudomonas putida GPo1.

An unprecedented method for the efficient conversion of C3-C12 linear alkanes to their corresponding primary alcohols mediated by the membrane-bound alkane hydroxylase (AlkB) from Pseudomonas putida GPo1 is demonstrated. The X-ray absorption spectroscopy (XAS) studies support that electrons can be transferred from the reduced AlkG (rubredoxin-2, the redox partner of AlkB) to AlkB in a two-phase manner. Based on this observation, an approach for the electrocatalytic conversion from alkanes to alcohols mediated by AlkB using an AlkG immobilized screen-printed carbon electrode (SPCE) is developed. The framework distortion of AlkB-AlkG adduct on SPCE surface might create promiscuity toward gaseous substrates. Hence, small alkanes including propane and n-butane can be accommodated in the hydrophobic pocket of AlkB for C-H bond activation. The proof of concept herein advances the development of artificial C-H bond activation catalysts.

Mechanistic Study of the Stereoselective Hydroxylation of [2-2 H1 ,3-2 H1 ]Butanes Catalyzed by Cytochrome P450 BM3 Variants.

Engineered bacterial cytochrome P450s are noted for their ability in the oxidation of inert small alkanes. Cytochrome P450 BM3 L188P A328F (BM3 PF) and A74E L188P A328F (BM3 EPF) variants are able to efficiently oxidize n-butane to 2-butanol. Esterification of the 2-butanol derived from this reaction mediated by the aforementioned two mutants gives diastereomeric excesses (de) of -56±1 and -52±1 %, respectively, with the preference for the oxidation occurring at the C-HS bond. When tailored (2R,3R)- and (2S,3S)-[2-2 H1 ,3-2 H1 ]butane probes are employed as substrates for both variants, the obtained de values from (2R,3R)-[2-2 H1 ,3-2 H1 ]butane are -93 and -92 % for BM3 PF and EPF, respectively; whereas the obtained de values from (2S,3S)-[2-2 H1 ,3-2 H1 ]butane are 52 and 56 % in the BM3 PF and EPF systems, respectively. The kinetic isotope effects (KIEs) for the oxidation of (2R,3R)-[2-2 H1 ,3-2 H1 ]butane are 7.3 and 7.8 in BM3 PF and EPF, respectively; whereas KIEs for (2S,3S)-[2-2 H1 ,3-2 H1 ]butanes are 18 and 25 in BM3 PF and EPF, respectively. The discrepancy in KIEs obtained from the two substrates supports the two-state reactivity (TSR) that is proposed for alkane oxidation in cytochrome P450 systems. Moreover, for the first time, experimental evidence for tunneling in the oxidation mediated by P450 is given through the oxidation of the C-HR bond in (2S,3S)-[2-2 H1 ,3-2 H1 ]butane.

Preconcentration of aqueous dyes through phase-transfer liquid-phase microextraction with a room-temperature ionic liquid.

In this study, we employed the room-temperature ionic liquid [bmim][PF(6)] as both ion-pair agent and an extractant in the phase-transfer liquid-phase microextraction (PTLPME) of aqueous dyes. In the PTLPME method, a dye solution was added to the extraction solution, comprising a small amount of [bmim][PF(6)] in a relatively large amount of CH(2)Cl(2), which serves as the disperser solvent to an extraction solution. Following extraction, CH(2)Cl(2) was evaporated from the extractant, resulting in the extracted dyes being concentrated in a small volume of the ionic liquid phase to increase the enrichment factor. The enrichment factors of for the dye Methylene Blue, Neutral Red, and Methyl Red were approximately 500, 550 and 400, respectively; their detection limits were 0.014, 0.43, and 0.02 µg L(-1), respectively, with relative standard deviations of 4.72%, 4.20%, and 6.10%, respectively.

Using subcritical/supercritical fluid chromatography to separate acidic, basic, and neutral compounds over an ionic liquid-functionalized stationary phase.

We packed an ionic liquid (IL)-functionalized stationary phase--based on 1-octyl-3-propylimidazolium chloride covalently bounded to silica gel--into a 3.2mmx250mm column for the simultaneous separation of acidic, basic, and neutral compounds using carbon dioxide subcritical/supercritical fluid chromatography (SFC), and examined the effects of the pressure, temperature, co-solvents, and additives on the retention behavior of the analytes. The model compounds tested for SFC separation are acetaminophen, metoprolol, fenoprofen, ibuprofen, naphthalene, and testosterone. The data indicate that hydrogen-bonding and hydrophobic interactions between the analytes and the IL-modified stationary phase seem to involve in the separation process. Simultaneous separation of acidic, basic, and neutral compounds via SFC was successful at a co-solvent content of 20% MeOH, a pressure of 110 bar, and a column temperature of 35 degrees C. The relative standard deviations of the retention times and peak areas at 50 ppm were all less than 4 and 8% (n=6), respectively.

Extraction of nanosize copper pollutants with an ionic liquid.

Speciation and possible reaction paths of nanosize copper pollutants extracted with a RTIL (room-temperature ionic liquid ([C4mim][PF6], 1-butyl-3-methylimidazolium hexafluorophosphate)) have been studied in the present work. Experimentally, in a very short contact time (2 min), 80-95% of nanosize CuO as well as other forms of copper (such as nanosize Cu, Cu2+, or Cu(II)(ads) (in the channels of MCM-41)) in the samples could be extracted into the RTIL. The main copper species extracted in the RTIL as observed by XANES (X-ray absorption near edge structure) were Cu(II). Existence of Cu-N bondings with coordination numbers (CNs) of 3-4 for copper extracted in the RTIL was found by EXAFS (extended X-ray absorption fine structural) spectroscopy. Interestingly, chelation of Cu(II) with 1-methylimidazole (MIm) in the RTIL during extraction was also observed by 1H NMR (nuclear magnetic resonance). At least two possible reaction paths for the rapid extraction of nanosize copper pollutants with the RTIL might occur: (1) an enhanced dissolution of nanosize CuO (to form Cu2+) and (2) formation of [Cu(MIm)4(H2O)2]2+ that acted as a carrier of copper into the RTIL matrix.

Aqueous-organic phase transfer of gold nanoparticles and gold nanorods using an ionic liquid.

The water-immiscible ionic liquid, [C4MIM][PF6], is a solvent medium that allows complete transfer of gold nanoparticles from an aqueous phase into an organic phase. Both spherical and rod-shaped gold nanoparticles are efficiently transferred from an aqueous solution into the organic phase without requiring the use of thiols. The sizes and shapes of the gold nanoparticles were preserved during the phase-transfer process when a surfactant was added to the ionic liquid. This process offers a simple approach for obtaining solutions of differently sized and shaped gold nanoparticles in ionic liquids.

Electroosmotic flow controllable coating on a capillary surface by a sol-gel process for capillary electrophoresis.

A simple coating procedure employing a sol-gel process to modify the inner surface of a bare fused-silica capillary with a positively charged quaternary ammonium group is established. Scanning electron microscopic studies reveal that a smooth coating with 1 to approximately 2 microm thickness can be obtained at optimized coating conditions. With 40 mM citrate as a running electrolyte, the plot of electroosmotic flow (EOF) versus pH shows a unique three-stage EOF pattern from negative to zero and then to positive over a pH range of 2.5 to 7.0. At pH above 5.5, the direction of the EOF is from the anode to the cathode, as is the case in a bare fused-silica capillary, and the electroosmotic mobility increases as the pH increases. However, the direction of the EOF is reversed at pH below 4.0. Over the pH range of 4.0 to 5.5, zero electroosmotic mobility is obtained. Such a three-stage EOF pattern has been used to separate six aromatic acids under suppressed EOF and to separate nitrate and nitrite with the anions migrating in the same direction as the EOF. The positively charged quaternary ammonium group on the coating was also utilized to minimize the adsorption problem during the separation of five basic drugs under suppressed EOF and during the separation of four basic proteins with the cations migrate in the opposite direction as the EOF. Also, the stability and reproducibility of this column are good.