ABSTRACT
Nanopore technology is widely used for sequencing DNA, RNA, and peptides with single-molecule resolution, for fingerprinting single proteins, and for detecting metabolites. However, the molecular driving forces controlling the analyte capture, its residence time, and its escape have remained incompletely understood. The recently developed Nanopore Electro-Osmotic trap (NEOtrap) is well fit to study these basic physical processes in nanopore sensing, as it reveals previously missed events. Here, we use the NEOtrap to quantitate the electro-osmotic and electrophoretic forces that act on proteins inside the nanopore. We establish a physical model to describe the capture and escape processes, including the trapping energy potential. We verified the model with experimental data on CRISPR dCas9-RNA-DNA complexes, where we systematically screened crucial modeling parameters such as the size and net charge of the complex. Tuning the balance between electrophoretic and electro-osmotic forces in this way, we compare the trends in the kinetic parameters with our theoretical models. The result is a comprehensive picture of the major physical processes in nanopore trapping, which helps to guide the experiment design and signal interpretation in nanopore experiments.
ABSTRACT
Diffuse large B-cell lymphoma (DLBCL) is characterized by significant treatment resistance. Palmitic acid (PA) has shown promising antitumor properties. This study aims to elucidate the molecular mechanisms by which PA influences DLBCL progression. We quantified the expression levels of microRNAs (miRNAs), Forkhead box protein O1 (FOXO1), and DNA methyltransferase 3A (DNMT3A) in both untreated and PA-treated DLBCL tumors and cell lines. Assessments were made of cell viability, apoptosis, and autophagy-related protein expression following PA administration. Interaction analyses among miR-429, DNMT3A, and FOXO1 were conducted using luciferase reporter assays and methylation-specific (MSP) Polymerase chain reaction (PCR). After transfecting the miR-429 inhibitor, negative control (NC) inhibitor, shRNA against DNMT3A (sh-DNMT3A), shRNA negative control (sh-NC), overexpression vector for DNMT3A (oe-DNMT3A), or overexpression negative control (oe-NC), we evaluated the effects of miR-429 and DNMT3A on cell viability, mortality, and autophagy-related protein expression in PA-treated DLBCL cell lines. The efficacy of PA was also tested in vivo using DLBCL tumor-bearing mouse models. MiR-429 and FOXO1 expression levels were downregulated, whereas DNMT3A was upregulated in DLBCL compared to the control group. PA treatment was associated with enhanced autophagy, mediated by the upregulation of miR-429 and downregulation of DNMT3A. The luciferase reporter assay and MSP confirmed that miR-429 directly inhibits DNMT3A, thereby reducing FOXO1 methylation. Subsequent experiments demonstrated that PA promotes autophagy and inhibits DLBCL progression by upregulating miR-429 and modulating the DNMT3A/FOXO1 axis. In vivo PA significantly reduced the growth of xenografted tumors through its regulatory impact on the miR-429/DNMT3A/FOXO1 axis. Palmitic acid may modulate autophagy and inhibit DLBCL progression by targeting the miR-429/DNMT3A/FOXO1 signaling pathway, suggesting a novel therapeutic target for DLBCL management.
Subject(s)
DNA Methyltransferase 3A , Forkhead Box Protein O1 , Lymphoma, Large B-Cell, Diffuse , MicroRNAs , Palmitic Acid , MicroRNAs/genetics , MicroRNAs/metabolism , Lymphoma, Large B-Cell, Diffuse/drug therapy , Lymphoma, Large B-Cell, Diffuse/genetics , Lymphoma, Large B-Cell, Diffuse/metabolism , Humans , Forkhead Box Protein O1/genetics , Forkhead Box Protein O1/metabolism , Animals , Mice , Palmitic Acid/pharmacology , Cell Line, Tumor , DNA Methylation/drug effects , DNA (Cytosine-5-)-Methyltransferases/genetics , DNA (Cytosine-5-)-Methyltransferases/metabolism , Promoter Regions, Genetic/drug effects , Mice, Nude , Male , Gene Expression Regulation, Neoplastic/drug effects , Female , Apoptosis/drug effects , Autophagy/drug effects , Mice, Inbred BALB CABSTRACT
Peptide phytohormones are decorated with post-translational modifications (PTMs) that are crucial for receptor recognition. Tyrosine sulfation on these hormones is essential for plant growth and development1. Measuring the occurrence and position of sulfotyrosine is, however, compromised by major technical challenges during isolation and detection2. We recently introduced a nanopore peptide sequencing method that sensitively detects PTMs at the single-molecule level3. By translocating PTM variants of the plant pentapeptide hormone phytosulfokine (PSK) through a nanopore, we here demonstrate accurate identification of sulfation and phosphorylation on the two tyrosine residues of PSK. Sulfation can be clearly detected and distinguished (>90%) from phosphorylation on the same residue. Moreover, the presence or absence of PTMs on the two close-by tyrosine residues can be accurately determined (>96% accuracy). Our findings demonstrate the extraordinary sensitivity of nanopore protein measurements, providing a new tool for identifying sulfation on peptide phytohormones and promising wider applications to identify protein PTMs.
ABSTRACT
Rapid processing of tactile information is essential to human haptic exploration and dexterous object manipulation. Conventional electronic skins generate frames of tactile signals upon interaction with objects. Unfortunately, they are generally ill-suited for efficient coding of temporal information and rapid feature extraction. In this work, we report a neuromorphic tactile system that uses spike timing, especially the first-spike timing, to code dynamic tactile information about touch and grasp. This strategy enables the system to seamlessly code highly dynamic information with millisecond temporal resolution on par with the biological nervous system, yielding dynamic extraction of tactile features. Upon interaction with objects, the system rapidly classifies them in the initial phase of touch and grasp, thus paving the way to fast tactile feedback desired for neuro-robotics and neuro-prosthetics.
Subject(s)
Artificial Limbs , Biomimetic Materials , Touch Perception , Touch , Humans , Action Potentials , Hand Strength , Touch/physiology , Wearable Electronic DevicesABSTRACT
Tracing fast nanopore-translocating analytes requires a high-frequency measurement system that warrants a temporal resolution better than 1 µs. This constraint may practically shift the challenge from increasing the sampling bandwidth to dealing with the rapidly growing noise with frequencies typically above 10 kHz, potentially making it still uncertain if all translocation events are unambiguously captured. Here, a numerical simulation model is presented as an alternative to discern translocation events with different experimental settings including pore dimension, bias voltage, the charge state of the analyte, salt concentration, and electrolyte viscosity. The model allows for simultaneous analysis of forces exerting on a large analyte cohort along their individual trajectories; these forces are responsible for the analyte movement leading eventually to the nanopore translocation. Through tracing the analyte trajectories, the Brownian force is found to dominate the analyte movement in electrolytes until the last moment at which the electroosmotic force determines the final translocation act. The mean dwell time of analytes mimicking streptavidin decreases from ≈6 to ≈1 µs with increasing the bias voltage from ±100 to ±500 mV. The simulated translocation events qualitatively agree with the experimental data with streptavidin. The simulation model is also helpful for the design of new solid-state nanopore sensors.
ABSTRACT
CONTEXT: Recent studies suggest that the clinical characteristics and biological behavior of pituitary tumors (PITs) in patients with multiple endocrine neoplasia type 1 (MEN1) may not be as aggressive as previously reported. Increased imaging of the pituitary as recommended by screening guidelines identifies more tumors, potentially at an earlier stage. However, it is unknown if these tumors have different clinical characteristics in different MEN1 mutations. OBJECTIVE: To assess characteristics of patients with MEN1 with and without PITs, and compare among different MEN1 mutations. METHODS: Data of patients with MEN1 in a tertiary referral center from 2010 to 2023 were retrospectively analyzed. RESULTS: Forty-two patients with MEN1 were included. Twenty-four patients had PITs, 3 of which were invasive and managed with transsphenoidal surgery. One PIT enlarged during follow-up. Patients with PITs had a higher median age at MEN1 diagnosis than those without PITs. MEN1 mutations were identified in 57.1% of patients, including 5 novel mutations. In patients with PITs, those with MEN1 mutations (mutation+/PIT+ group) had more additional MEN1-associated tumors than those without (mutation-/PIT+ group). The mutation+/PIT+ group had a higher incidence of adrenal tumors and a lower median age at initial manifestation of MEN1 than the mutation-/PIT+ group. The most common neuroendocrine neoplasm was nonfunctional in the mutation+/PIT+ group and insulin-secreting in the mutation-/PIT+ group. CONCLUSION: This is the first study comparing characteristics of patients with MEN1 with and without PITs harboring different mutations. Patients without MEN1 mutations tended to have less organ involvement and it might be reasonable for them to receive less intensive follow-up.
Subject(s)
Multiple Endocrine Neoplasia Type 1 , Pituitary Neoplasms , Humans , Multiple Endocrine Neoplasia Type 1/pathology , Pituitary Neoplasms/epidemiology , Pituitary Neoplasms/genetics , Pituitary Neoplasms/pathology , Retrospective Studies , Mutation , Pituitary Gland/pathologyABSTRACT
Nanopores are versatile single-molecule sensors offering a simple label-free readout with great sensitivity. We recently introduced the nanopore electro-osmotic trap (NEOtrap) which can trap and sense single unmodified proteins for long times. The trapping is achieved by the electro-osmotic flow (EOF) generated from a DNA-origami sphere docked onto the pore, but thermal fluctuations of the origami limited the trapping of small proteins. Here, we use site-specific cholesterol functionalization of the origami sphere to firmly link it to the lipid-coated nanopore. We can lock the origami in either a vertical or horizontal orientation which strongly modulates the EOF. The optimized EOF greatly enhances the trapping capacity, yielding reduced noise, reduced measurement heterogeneity, an increased capture rate, and 100-fold extended observation times. We demonstrate the trapping of a variety of single proteins, including small ones down to 14 kDa. The cholesterol functionalization significantly expands the application range of the NEOtrap technology.
Subject(s)
Nanopores , Proteins , DNAABSTRACT
Pulse-like signals are ubiquitous in the field of single molecule analysis, e.g., electrical or optical pulses caused by analyte translocations in nanopores. The primary challenge in processing pulse-like signals is to capture the pulses in noisy backgrounds, but current methods are subjectively based on a user-defined threshold for pulse recognition. Here, we propose a generalized machine-learning based method, named pulse detection transformer (PETR), for pulse detection. PETR determines the start and end time points of individual pulses, thereby singling out pulse segments in a time-sequential trace. It is objective without needing to specify any threshold. It provides a generalized interface for downstream algorithms for specific application scenarios. PETR is validated using both simulated and experimental nanopore translocation data. It returns a competitive performance in detecting pulses through assessing them with several standard metrics. Finally, the generalization nature of the PETR output is demonstrated using two representative algorithms for feature extraction.
Subject(s)
Nanopores , AlgorithmsABSTRACT
Integration of motor enzymes with biological nanopores has enabled commercial DNA sequencing technology; yet studies of the similar principle applying to solid-state nanopores are limited. Here, we demonstrate the real-life monitoring of phi29 DNA polymerase (DNAP) docking onto truncated-pyramidal nanopore (TPP) arrays through both electrical and optical readout. To achieve effective docking, atomic layer deposition of hafnium oxide is employed to reduce the narrowest pore opening size of original silicon (Si) TPPs to sub-10 nm. On a single TPP with pore opening size comparable to DNAP, ionic current measurements show that a polymerase-DNA complex can temporally dock onto the TPP with a certain docking orientation, while the majority become translocation events. On 5-by-5 TPP arrays, a label-free optical detection method using Ca2+ sensitive dye, are employed to detect the docking dynamics of DNAP. The results show that this label-free detection strategy is capable of accessing the docking events of DNAP on TPP arrays. Finally, we examine the activity of docked DNAP by performing on-site rolling circle amplification to synthesize single-stranded DNA (ssDNA), which serves as a proof-of-concept demonstration of utilizing this docking scheme for emerging nanopore sensing applications.
Subject(s)
Nanopores , DNA, Single-Stranded , DNA-Directed DNA Polymerase , Sequence Analysis, DNAABSTRACT
Conductive hydrogels have been studied as promising materials for the flexible and wearable bioelectronics, because of their unique electrical and mechanical properties. Addition of conducting polymers in biomaterial-based hydrogel matrix is a simple yet effective way to construct hydrogels with good conductivity and flexibility. In this work, a conductive hydrogel composed by a silk hydrogel and a conducting polymer, polypyrrole (PPy), is developed viain situpolymerization of pyrrole into the silk fibroin network. The silk-PPy hydrogel shows high conductivity (26 S m-1), as well as sensitive and fast responses to corresponding conformation changes. Taking advantages of these properties, flexible and wearable strain sensors are proposed for the monitoring of various body movements, which can detect both the large and subtle human motions with good sensitivity, reproducibility and stability. The hybridization of biomaterials and conducting polymers endows the multifunctions of the conductive hydrogels, thus showing considerable potentials in the advancement of the wearable electronics.
Subject(s)
Hydrogels , Wearable Electronic Devices , Biocompatible Materials , Electric Conductivity , Humans , Polymers , Pyrroles , Reproducibility of Results , SilkABSTRACT
Conductive hydrogels have been studied as promising materials for the flexible and wearable bioelectronics, because of their unique electrical and mechanical properties. Addition of conducting polymers in biomaterial-based hydrogel matrix is a simple yet effective way to construct hydrogels with good conductivity and flexibility. In this work, a conductive hydrogel composed by a silk hydrogel and a conducting polymer, polypyrrole (PPy), is developed via in-situ polymerization of pyrrole into the silk fibroin network. The silk-PPy hydrogel shows high conductivity (26 S/m), as well as sensitive and fast responses to corresponding conformation changes. Taking advantages of these properties, flexible and wearable strain sensors are proposed for the monitoring of various body movements, which can detect both the large and subtle human motions with good sensitivity, reproducibility and stability. The hybridization of biomaterials and conducting polymers endows the multifunctions of the conductive hydrogels, thus showing considerable potentials in the advancement of the wearable electronics.
ABSTRACT
Solid-state nanopores of on-demand dimensions and shape can facilitate desired sensor functions. However, reproducible fabrication of arrayed nanopores of predefined dimensions remains challenging despite numerous techniques explored. Here, bowl-shaped nanopores combining properties of ultrathin membrane and tapering geometry are manufactured using a self-limiting process developed on the basis of standard silicon technology. The upper opening of the bowl-nanopores is 60-120 nm in diameter, and the bottom orifice reaches sub-5 nm. Current-voltage characteristics of the fabricated bowl-nanopores display insignificant rectification indicating weak ionic selectivity, in accordance to numerical simulations showing minor differences in electric field and ionic velocity upon the reversal of bias voltages. Simulations reveal, concomitantly, high-momentum electroosmotic flow downward along the concave nanopore sidewall. Collisions between the left and right tributaries over the bottom orifice drive the electroosmotic flow both up into the nanopore and down out of the nanopore through the orifice. The resultant asymmetry in electrophoretic-electroosmotic force is considered the cause responsible for the experimentally observed strong directionality in λ-DNA translocation with larger amplitude, longer duration, and higher frequencies for the downward movements from the upper opening than the upward ones from the orifice. Thus, the resourceful silicon nanofabrication technology is shown to enable nanopore designs toward enriching sensor applications.
Subject(s)
Nanopores , Silicon , DNA , Electroosmosis , Silicon CompoundsABSTRACT
Nanopore technology holds great promise for a wide range of applications such as biomedical sensing, chemical detection, desalination, and energy conversion. For sensing performed in electrolytes in particular, abundant information about the translocating analytes is hidden in the fluctuating monitoring ionic current contributed from interactions between the analytes and the nanopore. Such ionic currents are inevitably affected by noise; hence, signal processing is an inseparable component of sensing in order to identify the hidden features in the signals and to analyze them. This Guide starts from untangling the signal processing flow and categorizing the various algorithms developed to extracting the useful information. By sorting the algorithms under Machine Learning (ML)-based versus non-ML-based, their underlying architectures and properties are systematically evaluated. For each category, the development tactics and features of the algorithms with implementation examples are discussed by referring to their common signal processing flow graphically summarized in a chart and by highlighting their key issues tabulated for clear comparison. How to get started with building up an ML-based algorithm is subsequently presented. The specific properties of the ML-based algorithms are then discussed in terms of learning strategy, performance evaluation, experimental repeatability and reliability, data preparation, and data utilization strategy. This Guide is concluded by outlining strategies and considerations for prospect algorithms.
Subject(s)
Nanopores , Algorithms , Machine Learning , Reproducibility of ResultsABSTRACT
Temporal changes in electrical resistance of a nanopore sensor caused by translocating target analytes are recorded as a sequence of pulses on current traces. Prevalent algorithms for feature extraction in pulse-like signals lack objectivity because empirical amplitude thresholds are user-defined to single out the pulses from the noisy background. Here, we use deep learning for feature extraction based on a bi-path network (B-Net). After training, the B-Net acquires the prototypical pulses and the ability of both pulse recognition and feature extraction without a priori assigned parameters. The B-Net is evaluated on simulated data sets and further applied to experimental data of DNA and protein translocation. The B-Net results are characterized by small relative errors and stable trends. The B-Net is further shown capable of processing data with a signal-to-noise ratio equal to 1, an impossibility for threshold-based algorithms. The B-Net presents a generic architecture applicable to pulse-like signals beyond nanopore currents.
Subject(s)
Deep Learning , NanoporesABSTRACT
Despite progress in the treatment of diabetic macular edema and diabetic retinopathy, the rate of lower fundus examination due to limitations of medical resources delays the diagnosis and treatment of diabetic retinopathy. Therefore, implementation of automated diabetic retinopathy screening program and the identification of more specific and sensitive biomarkers are important for facilitating the earlier detection of diabetic macular edema and diabetic retinopathy to decrease the prevalence of poor vision and blindness.
Subject(s)
Diabetic Retinopathy/epidemiology , Diabetic Retinopathy/therapy , Biomarkers , Diabetes Mellitus/epidemiology , Diabetic Retinopathy/diagnosis , Humans , Mass Screening , Prevalence , Risk FactorsABSTRACT
Interfacing solid-state nanopores with biological systems has been exploited as a versatile analytical platform for analysis of individual biomolecules. Although clogging of solid-state nanopores due to nonspecific interactions between analytes and pore walls poses a persistent challenge in attaining the anticipated sensing efficacy, insufficient studies focus on elucidating the clogging dynamics. Herein, we investigate the DNA clogging behavior by passing double-stranded (ds) DNA molecules of different lengths through hafnium oxide(HfO2)-coated silicon (Si) nanopore arrays, at different bias voltages and electrolyte pH values. Employing stable and photoluminescent-free HfO2/Si nanopore arrays permits a parallelized visualization of DNA clogging with confocal fluorescence microscopy. We find that the probability of pore clogging increases with both DNA length and bias voltage. Two types of clogging are discerned: persistent and temporary. In the time-resolved analysis, temporary clogging events exhibit a shorter lifetime at higher bias voltage. Furthermore, we show that the surface charge density has a prominent effect on the clogging probability because of electrostatic attraction between the dsDNA and the HfO2 pore walls. An analytical model based on examining the energy landscape along the DNA translocation trajectory is developed to qualitatively evaluate the DNA-pore interaction. Both experimental and theoretical results indicate that the occurrence of clogging is strongly dependent on the configuration of translocating DNA molecules and the electrostatic interaction between DNA and charged pore surface. These findings provide a detailed account of the DNA clogging phenomenon and are of practical interest for DNA sensing based on solid-state nanopores.
Subject(s)
Nanopores , DNA , Hafnium , OxidesABSTRACT
Surface states of mesoporous NiO semiconductor films have particular properties differing from the bulk and are able to dramatically influence the interfacial electron transfer and adsorption of chemical species. To achieve a better performance of NiO-based p-type dye-sensitized solar cells (p-DSCs), the function of the surface states has to be understood. In this paper, we applied a modified atomic layer deposition procedure that is able to passivate 72% of the surface states on NiO by depositing a monolayer of Al2O3. This provides us with representative control samples to study the functions of the surface states on NiO films. A main conclusion is that surface states, rather than the bulk, are mainly responsible for the conductivity in mesoporous NiO films. Furthermore, surface states significantly affect dye regeneration (with I-/I3- as redox couple) and hole transport in NiO-based p-DSCs. A new dye regeneration mechanism is proposed in which electrons are transferred from reduced dye molecules to intra-bandgap states, and then to I3- species. The intra-bandgap states here act as catalysts to assist I3- reduction. A more complete mechanism is suggested to understand the particular hole transport behavior in p-DSCs, in which the hole transport time is independent of light intensity. This is ascribed to the percolation hole hopping on the surface states. When the concentration of surface states was significantly reduced, the light-independent charge transport behavior in pristine NiO-based p-DSCs transformed into having an exponential dependence on light intensity, similar to that observed in TiO2-based n-type DSCs. These conclusions on the function of surface states provide new insight into the electronic properties of mesoporous NiO films.
ABSTRACT
Solid-state nanopores constitute a versatile platform for study of ion transport in nanoconfinement. The electrical double layer (EDL) plays a vital role in such nanoconfinements, but effects of induced surface charge on the EDL in the presence of an external transmembrane electric field are yet to be characterized. Here, the formation of induced charge on the nanopore sidewall surface and its effects, via modulation of the EDL and electroosmotic flow, on the ionic current are elucidated using a novel experimental setup with solid-state truncated-pyramidal nanopores. This study consists of three complementary approaches, i.e., an analytical model for induced surface charge, numerical simulation of induced surface charge, electroosmotic flow, and ionic current, and experimental validation with respect to the ionic current. The induced surface charge is generated by polarization in the dielectric membrane as a response to the applied electric field. This charge generation results in a nonuniform density of surface charge along the nanopore sidewall. It further causes ions in the electrolyte to redistribute, leading to a massive accumulation of single-polarity ions in the EDL and their counterions near the smaller opening of the nanopore. It also alters electrohydrodynamic properties in the nanopore, giving rise to the formation of electroosmotic vortexes in the vicinity of the smaller opening of the nanopore. Finally, the pattern of the electroosmotic flow can significantly influence the transport properties of the nanopore.
ABSTRACT
Knowledge of interfacial interactions between analytes and functionalized sensor surfaces, from where the signal originates, is key to the development and application of electronic sensors. The present work explores the tunability of pH sensitivity by the synergy of surface charge and molecular dipole moment induced by interfacial proton interactions. This synergy is demonstrated on a silicon-nanoribbon field-effect transistor (SiNR-FET) by functionalizing the sensor surface with properly designed chromophore molecules. The chromophore molecules can interact with protons and lead to appreciable changes in interface dipole moment as well as in surface charge state. In addition, the dipole moment can be tuned not only by the substituent on the chromophore but also by the anion in the electrolyte interacting with the protonated chromophore. By designing surface molecules to enhance the surface dipole moment upon protonation, an above-Nernstian pH sensitivity is achieved on the SiNR-FET sensor. This finding may bring an innovative strategy for tailoring the sensitivity of the SiNR-FET-based pH sensor toward a wide range of applications.