Carbon Nano-onions: Potassium Intercalation and Reductive Covalent Functionalization.

Herein we report the synthesis of covalently functionalized carbon nano-onions (CNOs) via a reductive approach using unprecedented alkali-metal CNO intercalation compounds. For the first time, an in situ Raman study of the controlled intercalation process with potassium has been carried out revealing a Fano resonance in highly doped CNOs. The intercalation was further confirmed by electron energy loss spectroscopy and X-ray diffraction. Moreover, the experimental results have been rationalized with DFT calculations. Covalently functionalized CNO derivatives were synthesized by using phenyl iodide and n-hexyl iodide as electrophiles in model nucleophilic substitution reactions. The functionalized CNOs were exhaustively characterized by statistical Raman spectroscopy, thermogravimetric analysis coupled with gas chromatography and mass spectrometry, dynamic light scattering, UV-vis, and ATR-FTIR spectroscopies. This work provides important insights into the understanding of the basic principles of reductive CNOs functionalization and will pave the way for the use of CNOs in a wide range of potential applications, such as energy storage, photovoltaics, or molecular electronics.

Enhanced Thermoelectric Performance in the Ba0.3Co4Sb12/InSb Nanocomposite Originating from the Minimum Possible Lattice Thermal Conductivity.

The thermoelectric efficiency of skutterudite materials can be improved by lowering the lattice thermal conductivity via the uniform dispersion of a nanosized second phase in the matrix of filled Co4Sb12. In this work, nanocomposites of Ba0.3Co4Sb12 and InSb were synthesized using ball-milling and spark plasma sintering. The thermoelectric transport properties were studied from 4.2 to 773 K. The InSb nanoparticles of ∼20 nm were found to be dispersed in the Ba0.3Co4Sb12 grains with a few larger grains of about 10 µm due to the agglomeration of the InSb nanoparticles. The +2 oxidation state of Ba in Co4Sb12 resulted in a low electrical resistivity, ρ, value of the matrix. The enhancement of the Seebeck coefficient, S, and the electrical resistivity values of Ba0.3Co4Sb12 with the addition of InSb can be credited to the energy-filtering effect of electrons with low energy at the interfaces. The power factor of the composites could not be enhanced compared to the matrix because of the very high ρ value. A minimum possible lattice thermal conductivity (0.45 W/m·K at 773 K) was achieved due to the combined effect of rattling of Ba atoms in the voids and enhanced phonon scattering at the interfaces induced by nanosized InSb particles. As a result, the (InSb)0.15 + Ba0.3Co4Sb12 composite exhibited improved thermoelectric properties with the highest zT of 1.4 at 773 K and improved mechanical properties with a higher hardness, higher Young's modulus, and lower brittleness.

Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment.

In this study, two biodegradable Mg-Zn-Ca alloys with alloy content of less than 1 wt % were strengthened via high pressure torsion (HPT). A subsequent heat treatment at temperatures of around 0.45 Tm led to an additional, sometimes even larger increase in both hardness and tensile strength. A hardness of more than 110 HV and tensile strength of more than 300 MPa were achieved in Mg-0.2Zn-0.5Ca by this procedure. Microstructural analyses were conducted by scanning and transmission electron microscopy (SEM and TEM, respectively) and atom probe tomography (APT) to reveal the origin of this strength increase. They indicated a grain size in the sub-micron range, Ca-rich precipitates, and segregation of the alloying elements at the grain boundaries after HPT-processing. While the grain size and segregation remained mostly unchanged during the heat treatment, the size and density of the precipitates increased slightly. However, estimates with an Orowan-type equation showed that precipitation hardening cannot account for the strength increase observed. Instead, the high concentration of vacancies after HPT-processing is thought to lead to the formation of vacancy agglomerates and dislocation loops in the basal plane, where they represent particularly strong obstacles to dislocation movement, thus, accounting for the considerable strength increase observed. This idea is substantiated by theoretical considerations and quenching experiments, which also show an increase in hardness when the same heat treatment is applied.

Lattice Opening upon Bulk Reductive Covalent Functionalization of Black Phosphorus.

The chemical bulk reductive covalent functionalization of thin-layer black phosphorus (BP) using BP intercalation compounds has been developed. Through effective reductive activation, covalent functionalization of the charged BP by reaction with organic alkyl halides is achieved. Functionalization was extensively demonstrated by means of several spectroscopic techniques and DFT calculations; the products showed higher functionalization degrees than those obtained by neutral routes.

Exploring the Formation of Black Phosphorus Intercalation Compounds with Alkali Metals.

Black phosphorus intercalation compounds (BPICs) with alkali metals (namely: K and Na) have been synthesized in bulk by solid-state as well as vapor-phase reactions. By means of a combination of in situ X-ray diffraction, Raman spectroscopy, and DFT calculations the structural behavior of the BPICs at different intercalation stages has been demonstrated for the first time. Our results provide a glimpse into the very first steps of a new family of intercalation compounds, with a distinct behavior as compared to its graphite analogues (GICs), showing a remarkable structural complexity and a dynamic behavior.

Unifying Principles of the Reductive Covalent Graphene Functionalization.

Covalently functionalized graphene derivatives were synthesized via benchmark reductive routes using graphite intercalation compounds (GICs), in particular KC8. We have compared the graphene arylation and alkylation of the GIC using 4-tert-butylphenyldiazonium and bis(4-(tert-butyl)phenyl)iodonium salts, as well as phenyl iodide, n-hexyl iodide, and n-dodecyl iodide, as electrophiles in model reactions. We have put a particular focus on the evaluation of the degree of addition and the bulk functionalization homogeneity (Hbulk). For this purpose, we have employed statistical Raman spectroscopy (SRS), and a forefront characterization tool using thermogravimetric analysis coupled with FT-IR, gas chromatography, and mass spectrometry (TGA/FT-IR/GC/MS). The present study unambiguously shows that the graphene functionalization using alkyl iodides leads to the best results, in terms of both the degree of addition and the Hbulk. Moreover, we have identified the reversible character of the covalent addition chemistry, even at temperatures below 200 °C. The thermally induced addend cleavage proceeds homolytically, which allows for the detection of dimeric cleavage products by TGA/FT-IR/GC/MS. This dimerization points to a certain degree of regioselectivity, leading to a low sheet homogeneity (Hsheet). Finally, we developed this concept by performing the reductive alkylation reaction in monolayer CVD graphene films. This work provides important insights into the understanding of basic principles of reductive graphene functionalization and will serve as a guide in the design of new graphene functionalization concepts.

Phonon-tunnelling dissipation in mechanical resonators.

Microscale and nanoscale mechanical resonators have recently emerged as ubiquitous devices for use in advanced technological applications, for example, in mobile communications and inertial sensors, and as novel tools for fundamental scientific endeavours. Their performance is in many cases limited by the deleterious effects of mechanical damping. In this study, we report a significant advancement towards understanding and controlling support-induced losses in generic mechanical resonators. We begin by introducing an efficient numerical solver, based on the 'phonon-tunnelling' approach, capable of predicting the design-limited damping of high-quality mechanical resonators. Further, through careful device engineering, we isolate support-induced losses and perform a rigorous experimental test of the strong geometric dependence of this loss mechanism. Our results are in excellent agreement with the theory, demonstrating the predictive power of our approach. In combination with recent progress on complementary dissipation mechanisms, our phonon-tunnelling solver represents a major step towards accurate prediction of the mechanical quality factor.