ABSTRACT
Two-dimensional (2D) layered materials like graphene, transition-metal dichalcogenides (TMDs), boron nitrides, etc., exhibit unique and fascinating properties, such as high surface-to-volume ratio, inherent mechanical flexibility and robustness, tunable bandgap, and high carrier mobility, which makes them an apt candidate for flexible electronics with low consumption of power. Because of these properties, they are in tremendous demand for advancement in energy, environmental, and biomedical sectors developed through various technologies. The production and scalability of these materials must be sustainable and ecofriendly to utilize these unique properties in the real world. Here, in this current review, we review molybdenum disulfide (MoS2 nanosheets) in detail, focusing on exfoliated MoS2 in water and the applicability of aqueous MoS2 suspensions in various fields. The exfoliation of MoS2 results in the formation of single or few-layered MoS2. Therefore, this Review focuses on the few layers of exfoliated MoS2 that have the additional properties of 2D layered materials and higher excellent compatibility for integration than existing conventional Si tools. Hence, a few layers of exfoliated MoS2 are widely explored in biosensing, gas sensing, catalysis, photodetectors, energy storage devices, a light-emitting diode (LED), adsorption, etc. This review covers the numerous methodologies to exfoliate MoS2, focusing on the various published methodologies to obtain nanosheets of MoS2 from water solutions and their use.
ABSTRACT
The oxidation of cellulose to dialdehyde cellulose (DAC) is a process that has received increased interest during recent years. Herein, kinetic modeling of the reaction with sodium periodate as an oxidizing agent was performed to quantify rate-limiting steps and overall kinetics of the cellulose oxidation reaction. Considering a pseudo-first-order reaction, a general rate expression was derived to elucidate the impact of pH, periodate concentration, and temperature on the oxidation of cellulose and concurrent formation of cellulose degradation products. Experimental concentration profiles were utilized to determine the rate constants for the formation of DAC (k1), degradation constant of cellulose (k2), and degradation of DAC (k3), confirming that the oxidation follows a pseudo-first-order reaction. Notably, the increase in temperature has a more pronounced effect on k1 compared to the influence of IO4- concentration. In contrast, k2 and k3 display minimal changes in response to IO4- concentration but increase significantly with increasing temperature. The kinetic model developed may help with understanding the rate-limiting steps and overall kinetics of the cellulose oxidation reaction, providing valuable information for optimizing the process toward a faster reaction with higher yield of the target product.
ABSTRACT
To further our understanding of a thermoplastic arabinoxylan (AX) material obtained through an oxidation-reduction-etherification pathway, the role of the initial arabinose:xylose ratio on the material properties was investigated. Compression molded films with one molar substitution of butyl glycidyl ether (BGE) showed markedly different tensile behaviors. Films made from low arabinose AX were less ductile, while those made from high arabinose AX exhibited elastomer-like behaviors. X-ray scattering confirmed the presence of nanostructure formation resulting in nano-domains rich in either AX or BGE, from side chain grafting. The scattering data showed variations in the presence of ordered structures, nano-domain sizes and their temperature response between AX with different arabinose contents. In dynamic mechanical testing, three transitions were observed at approximately -90 °C, -50 °C and 80 °C, with a correlation between samples with more structured nano-domains and those with higher onset transition temperatures and lower storage modulus decrease. The mechanical properties of the final thermoplastic AX material can therefore be tuned by controlling the composition of the starting material.
ABSTRACT
Attractive (non-self-assembling) aqueous cellulose nanocrystal (CNC) suspensions were topologically tailored into isotropic gels through the surface grafting of dialkyl groups. We thus focus on the influence of CNC concentration, including for pristine CNC, surface linker branching, branching degree, and the influence of side group size and branch-on-branch surface-grafted groups. The resulting mobility and strength of interaction in particle-particle interaction mediated by the surface groups was investigated from a rheological point of view. The emphasis is on nonlinear material parameters from Fourier-transform rheology and stress decomposition analysis. The results show that nonlinear material parameters are more sensitive than linear viscoelastic parameters to the onset of weakly interconnected networks in pristine CNC isotropic suspensions. All surface-modified CNC suspensions resulted in isotropic gels. The nonlinear material parameters were found to be broadly sensitive to CNC concentration, branching, degree of branching and surface-grafted linkers' length. However, the length of the grafted chains and the degree of branching were the primary factors influencing the nonlinear material response. Furthermore, the results showed evidence of two strain amplitude ranges with distinct nonlinear signatures that could be attributed to the disruption of weak network connection points and to distortions of more dense (aggregate) network regions, respectively.
ABSTRACT
This study aimed to elucidate how the glass transition temperature and water interactions in cellulose esters are affected by the structures of their side chains. Cellulose acetate, cellulose acetate propionate and cellulose acetate butyrate with three fractions of butyrates, all having the same total degree of substitution, were selected, and hot-melt pressed. The degree of substitution, structural properties, and water interactions were determined. The Hansen solubility parameters were calculated and showed that the dispersive energy dominates the total cohesive energy, followed by hydrogen bonding and polar energy. The glass transition temperature (Tg) decreased, counter-intuitively, with an increased total cohesive energy, which can be explained by the short-range hydrogen bonds being screened by the increased length of the substituents. The solubility and penetration of water in the cellulose esters decreased with increased side chain length, although the hydrogen bonding energies for all the esters were approximately constant.
ABSTRACT
Hydrophobization of hemicellulose causes melt processing and makes them stretchable thermoplastics. Understanding how native and/or appended side chains in various hemicelluloses after chemical modification affect melt processing and material properties can help in the development of products for film packaging and substrates for stretchable electronics applications. Herein, we describe a one-step and two-step strategy for the fabrication of flexible and stretchable thermoplastics prepared by compression molding of two structurally different arabinoxylans (AX). For one-step synthesis, the n-butyl glycidyl ether epoxide ring was opened to the hydroxyl group, resulting in the introduction of alkoxide side chains. The first step in the two-step synthesis was periodate oxidation. Because the melt processability for AXs having low arabinose to xylose ratio (araf/xylp<0.5) have been limited, two structurally distinct AXs extracted from wheat bran (AXWB, araf/xylp = 3/4) and barley husk (AXBH, araf/xylp = 1/4) were used to investigate the effect of araf/xylp and hydrophobization on the melt processability and properties of the final material. Melt compression processability was achieved in AXBH derived samples. DSC and DMA confirmed that the thermoplastics derived from AXWB and AXBH had dual and single glass transition (Tg) characteristics, respectively, but the thermoplastics derived from AXBH had lower stretchability (maximum 160%) compared to the AXWB samples (maximum 300%). Higher araf/xylp values, and thus longer alkoxide side chains in AXWB-derived thermoplastics, explain the stretchability differences.
Subject(s)
Hordeum , Xylans , Biomass , Dietary Fiber , Hordeum/chemistry , Xylans/chemistryABSTRACT
A scalable synthetic procedure for fabricating photoactive carbon dots (CD) from microcrystalline cellulose (MCC) is presented. The MCC was transformed into a photoactive nanosized CD by a one-step acid-assisted thermal-carbonization (~90 °C for 30 min). The efficiency of the obtained CD was determined by photo-removal of toxic hexavalent chromium (Cr(VI)) ions from wastewater. CD obtained from cellulose completely removed 20 ppm of Cr(VI) wastewater within â¼120 min under sunlight illumination. No Cr(VI) removal was observed in dark conditions and with control cellulose material as reference samples. The Cr(VI) removal follows pseudo-first-order kinetics along with a half-life of â¼26 min. Furthermore, the Cr(VI) removal from wastewater was supported via cyclic voltammetry analysis. Using a low-cost, naturally available cellulose material and sulfuric acid, the world's most-used chemical, creates techno-economic prerequisites for a scalable process of photoactive carbon dots.
Subject(s)
Water Pollutants, Chemical , Water Purification , Adsorption , Carbon , Cellulose , Chromium/analysis , Hydrogen-Ion Concentration , Kinetics , Sunlight , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/toxicityABSTRACT
Hemicelluloses are regarded as one of the first candidates for the development of value-added materials due to their renewability, abundance, and functionality. However, because most hemicelluloses are brittle, they can only be processed as a solution and cannot be processed using industrial melt-based polymer processing techniques. In this study, arabinoxylan (AX) was hydrophobized by incorporating butyl glycidyl ether (BuGE) into the hydroxyl groups through the opening of the BuGE epoxide ring, yielding alkoxy alcohols with terminal ethers. The formed BuGE derivatives were melt processable and can be manufactured into stretchable thermoplastic films through compression molding, which has never been done before with hemicellulose modified in a single step. The structural and thermomechanical properties of the one-step synthesis approach were compared to those of a two-step synthesis with a pre-activation step to demonstrate its robustness. The strain at break for the one-step synthesized AX thermoplastic with 3 mol of BuGE is ≈200%. These findings suggest that thermoplastic polymers can be composited with hemicelluloses or that thermoplastic polymers made entirely of hemicelluloses can be designed as packaging and stretchable electronics supports.
Subject(s)
Epoxy Compounds/chemistry , Plastics/chemistry , Polysaccharides/chemistry , Xylans/chemistry , Hydrophobic and Hydrophilic Interactions , Plastics/chemical synthesis , Polymers/chemical synthesis , Polymers/chemistryABSTRACT
Developing flexible, stretchable, and thermally processable materials for packaging and stretchable electronic applications from polysaccharide-based polymers contributes to the smooth transition of the fossil-based economy to the circular bioeconomy. We present arabinoxylan (AX)-based thermoplastics obtained by ring-opening oxidation and subsequent reduction (dA-AX) combined with hydrophobization with three different glycidyl ethers [n-butyl (BuGE), isopropyl (iPrGE), and 2-ethyl hexyl (EtHGE) glycidyl ether]. We also investigate the relationship between structural composition, thermal processing, and thermomechanical properties. BuGE- and iPrGE-etherified dA-AXs showed glass-transition temperatures (Tg) far below their degradation temperatures and gave thermoplastic materials when compression-molded at 140 °C. The BuGE (3 mol)-etherified dA-AX films at 19 and 31% oxidation levels show 244% (±42) and 267% (±72) elongation, respectively. In contrast, iPrGE-dA-AX samples with shorter and branched terminals in the side chains had a maximum of 60% (±19) elongation. No studies have reported such superior elongation of AX thermoplastic films and its relationship with molar substitution and Tg. These findings have implications on the strategic development of chemical modification routes using commercial polymer processing technologies and on fine-tuning structures and properties when specific polysaccharide-based polymers are used to engineer bio-based products for film, packaging, and substrates for stretchable electronic applications.
Subject(s)
Biocompatible Materials/chemistry , Epoxy Compounds/chemistry , Temperature , Xylans/chemistry , Materials Testing , Molecular Structure , Oxidation-Reduction , Particle SizeABSTRACT
The cell wall polysaccharide ulvan was isolated from two species of the seaweed Ulva collected along the Swedish west coast. Acidic extraction was benchmarked against hot water extraction with enzymatic purification and against commercial ulvan. Extracted ulvan contained 11-18 % g/g of ash, some protein (up to 1.3 % g N/g) but minimal colored impurities. The ulvans had high molecular weights (660,000-760,000â¯g/mol) and were composed of 77-79 % g/g carbohydrates, mainly rhamnose, xylose, glucose, glucuronic acid, and iduronic acid. The extraction protocol and the ulvan source strongly impact the molecular weight and the chemical composition. Acidic extraction caused almost complete desulfation of the isolated ulvan while the other method preserved a significant degree of SO3 substituents. Elemental analysis of ash remaining after thermal degradation showed presence of common mineral elements such as Na, Ca, Mg, Al, and K, but none of the heavy metals Pb, Hg, or As.
Subject(s)
Cell Wall/chemistry , Polysaccharides/chemistry , Ulva/chemistry , Chemical Fractionation , Molecular Weight , Polysaccharides/isolation & purification , SwedenABSTRACT
Rigid amphipathic fusion inhibitors (RAFIs) are potent antivirals based on a perylene core linked with a nucleoside moiety. Sugar-free analogues of RAFIs, 5-(perylen-3-ylethynyl)uracil-1-acetic acid 1 and its amides 2, were synthesized using combined protection group strategy. Compounds 1 and 2 appeared to have low toxicity on porcine embryo kidney (PEK) or rhabdomiosarcoma (RD) cells together with remarkable activity against enveloped tick-borne encephalitis virus (TBEV): EC50 values vary from 0.077⯵M to subnanomolar range. Surprisingly, 3-pivaloyloxymethyl (Pom) protected precursors 7 and 8 showed even more pronounced activity. All the compounds showed no activity against several non-enveloped enteroviruses, except 4-hydroxybutylamides 2d,g, which inhibited the reproduction of enterovirus A71 with EC50 50-100⯵M, with a non-specific mode of action. The results suggest that the carbohydrate moiety of RAFI nucleosides does not play a crucial role in their antiviral action, and biological activity of the 5-(perylen-3-ylethynyl)uracil scaffold can be effectively modulated by substituents in positions 1 and 3. The high antiviral activity of these new compounds, coupled with low toxicity advocate their potential role in antiviral therapy.
Subject(s)
Antiviral Agents/pharmacology , Blood-Brain Barrier/drug effects , Encephalitis Viruses, Tick-Borne/drug effects , Enterovirus A, Human/drug effects , Uracil/pharmacology , Animals , Antiviral Agents/chemical synthesis , Antiviral Agents/chemistry , Blood-Brain Barrier/metabolism , Cell Line , Cell Survival/drug effects , Chlorocebus aethiops , Dose-Response Relationship, Drug , Humans , Intestines/drug effects , Microbial Sensitivity Tests , Molecular Structure , Structure-Activity Relationship , Swine , Uracil/analogs & derivatives , Uracil/chemistry , Vero CellsABSTRACT
Hemicelluloses are a relatively unused renewable resource. One reason is their broad structure variety that makes it hard to understand structure-property relations. In this study arbinoxylan, extracted from barley husk, was chemically modified into hydroxypropyl methyl-, hydroxypropyl- and methyl arabinoxylan. The relationship between structure and phase behavior was investigated by using multivariate analysis. The arabinoxylan ethers were characterized using mid-infrared FTIR spectroscopy and from principal components analysis, PCA, structural or physical variations between samples were visualized. With orthogonal projections to latent structures, OPLS, vibrations specific for arabinoxylan hydroxypropyl and methyl substitutions was assigned. Among the observed differences between chemical derivatives was an intensity change in the water vibration. The differences in hydration were related to clouding phase behavior of the arabinoxylan ethers. This study shows that multivariate analysis methods are useful for finding unexpected and/or hidden features in the polysaccharide structure.
ABSTRACT
BACKGROUND AND PURPOSE: The PET-boost randomized phase II trial (NCT01024829) investigated dose-escalation to the entire primary tumour or redistributed to regions of high pre-treatment FDG-uptake in inoperable non-small cell lung cancer (NSCLC) patients. We present a toxicity analysis of the 107 patients randomized in the study. MATERIALS AND METHODS: Patients with stage II-III NSCLC were treated with an isotoxic integrated boost of ≥72â¯Gy in 24 fractions, with/without chemotherapy and strict dose limits. Toxicity was scored until death according to the CTCAEv3.0. RESULTS: 77 (72%) patients were treated with concurrent chemoradiotherapy. Acute and late ≥G3 occurred in 41% and 25%. For concurrent (C) and sequential or radiotherapy alone (S), the most common acute ≥G3 toxicities were: dysphagia in 14.3% (C) and 3.3% (S), dyspnoea in 2.6% (C) and 6.7% (S), pneumonitis in 0% (C) and 6.7% (S), cardiac toxicity in 6.5% (C) and 3.3% (S). Seventeen patients died of which in 13 patients a possible relation to treatment could not be excluded. In 10 of these 13 patients progressive disease was scored. Fatal pulmonary haemorrhages and oesophageal fistulae were observed in 9 patients. CONCLUSION: Personalized dose-escalation in inoperable NSCLC patients results in higher acute and late toxicity compared to conventional chemoradiotherapy. The toxicity, however, was within the boundaries of the pre-defined stopping rules.
Subject(s)
Carcinoma, Non-Small-Cell Lung/radiotherapy , Lung Neoplasms/radiotherapy , Aged , Antineoplastic Combined Chemotherapy Protocols/therapeutic use , Carcinoma, Non-Small-Cell Lung/diagnostic imaging , Carcinoma, Non-Small-Cell Lung/drug therapy , Carcinoma, Non-Small-Cell Lung/pathology , Chemoradiotherapy , Dose Fractionation, Radiation , Dose-Response Relationship, Radiation , Female , Fluorodeoxyglucose F18/pharmacokinetics , Humans , Lung Neoplasms/diagnostic imaging , Lung Neoplasms/drug therapy , Lung Neoplasms/pathology , Male , Middle Aged , Neoplasm Staging , Positron-Emission Tomography/methods , Radiopharmaceuticals/pharmacokinetics , Radiotherapy/adverse effects , Radiotherapy Planning, Computer-Assisted/methodsABSTRACT
Hemicellulose from pulp mill process water and crop residuals from food production often end up in waste streams or burnt for energy contribution. These waste products contain valuable biopolymers but lack many attributes needed for use in applications such as food and medical or consumer products. This study reports on an investigation of the periodate oxidation of hardwood xylan and arabinoxylan (AX) from wheat bran to produce materials with new functionalities. The study explores how to control the oxidation degree and describes structural differences between the two xylan-based polymers. For the xylan samples, the oxidation resulted in a lowering of the glass transition temperature (Tg), indicating a more flexible chain due to ring-opening of the xylan anhydro-sugar units. For the AX samples, the arabinose side-groups were instead oxidized, hindering oxidation on part of the xylose units, which resulted in a crosslinked network with an unchanged Tg but reduced intrinsic viscosity.
ABSTRACT
PURPOSE: FDG-PET scans have shown spatial consistency in NSCLC patients before and following chemoradiotherapy, implying radioresistance. We hypothesized that patients, who received FDG-PET redistributed dose painting, would demonstrate reduced spatial consistency when compared to registered patients or to escalated dose treatment. METHODS: Stage II-IIIB, inoperable NSCLC patients were randomized in a phase II trial (NCT01024829) to (chemo)radiotherapy of either homogeneous boosting to the primary tumor, or redistributed inhomogeneous boosting to the GTV subvolume (FDG-SUVâ¯>â¯50% SUVmax). Patients who could not be boosted (≥72â¯Gy) received 66â¯Gy in 24 fractions. Spatial consistency of pre-treatment and post-treatment (3â¯months) FDG-PET scans was measured by various overlap fraction thresholds. RESULTS: 66/82 patients analyzed received randomized treatment in the trial. Thresholds of 50% SUVmax pre-treatment and 70% SUVmax post-treatment yielded a median overlap fraction of 0.63 [interquartile range: 0.15-0.93], with similar results for other thresholds. No significant differences were found among overlap fractions of the treatment groups. A high incidence of FDG-uptake in normal lung (grade-1 pneumonitis: 73%) was found post-treatment. CONCLUSION: FDG redistributed boosting did not reduce FDG spatial consistency from pre-treatment to post-treatment, which was highly variable among patients. The study found high numbers of patients with lung inflammation after treatment.
Subject(s)
Carcinoma, Non-Small-Cell Lung/diagnostic imaging , Carcinoma, Non-Small-Cell Lung/radiotherapy , Fluorodeoxyglucose F18/pharmacokinetics , Lung Neoplasms/diagnostic imaging , Lung Neoplasms/radiotherapy , Carcinoma, Non-Small-Cell Lung/metabolism , Carcinoma, Non-Small-Cell Lung/pathology , Female , Humans , Lung Neoplasms/metabolism , Lung Neoplasms/pathology , Male , Positron-Emission Tomography/methods , Radiation Tolerance , Radiopharmaceuticals/pharmacokinetics , Radiotherapy DosageABSTRACT
The biobased production of adipic acid, a precursor in the production of nylon, is of great interest in order to replace the current petrochemical production route. Glucose-rich lignocellulosic raw materials have high potential to replace the petrochemical raw material. A number of metabolic pathways have been proposed for the microbial conversion of glucose to adipic acid, but achieved yields and titers remain to be improved before industrial applications are feasible. One proposed pathway starts with lysine, an essential metabolite industrially produced from glucose by microorganisms. However, the drawback of this pathway is that several reactions are involved where there is no known efficient enzyme. By changing the order of the enzymatic reactions, we were able to identify an alternative pathway with one unknown enzyme less compared to the original pathway. One of the reactions lacking known enzymes is the reduction of the unsaturated α,ß bond of 6-amino-trans-2-hexenoic acid and trans-2-hexenedioic acid. To identify the necessary enzymes, we selected N-ethylmaleimide reductase from Escherichia coli and Old Yellow Enzyme 1 from Saccharomyces pastorianus. Despite successful in silico docking studies, where both target substrates could fit in the enzyme pockets, and hydrogen bonds with catalytic residues of both enzymes were predicted, no in vitro activity was observed. We hypothesize that the lack of activity is due to a difference in electron withdrawing potential between the naturally reduced aldehyde and the carboxylate groups of our target substrates. Suggestions for protein engineering to induce the reactions are discussed, as well as the advantages and disadvantages of the two metabolic pathways from lysine. We have highlighted bottlenecks associated with the lysine pathways, and proposed ways of addressing them.
Subject(s)
Adipates/metabolism , Alkenes/metabolism , Aminocaproates/metabolism , Computer Simulation , Dicarboxylic Acids/metabolism , Electron Transport , Escherichia coli/enzymology , Molecular Docking Simulation , NADPH Dehydrogenase/chemistry , NADPH Dehydrogenase/metabolism , Oxidoreductases/chemistry , Oxidoreductases/metabolism , Protein Conformation , Saccharomyces cerevisiae/enzymologyABSTRACT
BACKGROUND: The thiosemicarbazone CD 02750 (VLX50) was recently reported as a hit compound in a phenotype-based drug screen in primary cultures of patient tumor cells. We synthesized a copper complex of VLX50, denoted VLX60, and characterized its antitumor and mechanistic properties. MATERIALS AND METHODS: The cytotoxic effects and mechanistic properties of VLX60 were investigated in monolayer cultures of multiple human cell lines, in tumor cells from patients, in a 3-D spheroid cell culture system and in vivo and were compared with those of VLX50. RESULTS: VLX60 showed ≥ 3-fold higher cytotoxic activity than VLX50 in 2-D cultures and, in contrast to VLX50, retained its activity in the presence of additional iron. VLX60 was effective against non-proliferative spheroids and against tumor xenografts in vivo in a murine model. In contrast to VLX50, gene expression analysis demonstrated that genes associated with oxidative stress were considerably enriched in cells exposed to VLX60 as was induction of reactive oxygen. VLX60 compromised the ubiquitin-proteasome system and was more active in BRAF mutated versus BRAF wild-type colon cancer cells. CONCLUSIONS: The cytotoxic effects of the copper thiosemicarbazone VLX60 differ from those of VLX50 and shows interesting features as a potential antitumor drug, notably against BRAF mutated colorectal cancer.
Subject(s)
Antineoplastic Agents/pharmacology , Copper , Pyridines/pharmacology , Thiosemicarbazones/pharmacology , Animals , Antineoplastic Agents/chemistry , Apoptosis/drug effects , Cell Cycle/drug effects , Cell Line, Tumor , Cell Proliferation/drug effects , Copper/chemistry , Disease Models, Animal , Dose-Response Relationship, Drug , Gene Expression Regulation, Neoplastic/drug effects , Humans , Mice , Oxidative Stress/drug effects , Proteasome Endopeptidase Complex/metabolism , Pyridines/chemistry , Thiosemicarbazones/chemistry , Tumor Cells, Cultured , Xenograft Model Antitumor AssaysABSTRACT
Cellulose esters with long carbon side chains (e.g. stearate) were produced via a homogenous reaction in ionic liquids. The degree of substitution was calculated to approximately 2. The melt rheology was studied for the pure cellulose esters but also combinations of the esters and polypropylene to study the processability of a blended composite material. It was shown that the compatibility between the two components was weak, which resulted in a phase-separated composite material. The morphology and permeability of water and oleic acid of the composite films were studied and it was shown that the water permeability decreased upon addition of the cellulose ester to the polymer. The permeability of oleic acid was however unchanged, which is most probable a result of high solubility in the cellulose ester rich domains of the composites. Also, the following hypothesis is stated: cellulose stearate influence the polypropylene crystallization process by decreasing the size of spherulites.
Subject(s)
Cellulose , Membranes, Artificial , Oleic Acid/chemistry , Polypropylenes/chemistry , Stearic Acids/chemistry , Water/chemistry , PermeabilityABSTRACT
During the last century there has been a steady increase in the number of publications on practical applications of hemicellulose. Due to the water and moisture sensitivity, poor film-forming ability and lack of thermal processability most of the hemicelluloses need to be chemically modified prior to processing into materials. Within this study we present the results of azetidinium salts as a new functional group for conjugation to polysaccharides. The reactivity of three azetidinium salts on xylan, arabinoxylan and galactoglucomannan was investigated. Carbonyl groups were found to be favorable for the reaction with azetidinium salts and thus the glucuronic acid content in the hemicellulose determines the degree of substitution. TEMPO-oxidation of the hemicelluloses was done which successfully increased the degree of substitution. The highly reactive azetidinium salts are easily synthesized from secondary amines and epichlorohydrin and can be used as a new tool toward functionalization of hemicelluloses into the after sought properties.