ABSTRACT
Per- and polyfluoroalkyl substances (PFASs) are a class of synthetic chemicals of concern that exhibit extreme persistence within the environment and possess physicochemical properties that are resistant to targeted degradation. Comprising substantial concentrations of PFASs, aqueous film-forming foams (AFFFs) present a major exposure pathway to the environment having been applied to land at firefighting-training sites globally for decades. This has led to significant contamination of environmental media. Herein, we demonstrate that mechanochemical destruction (MCD) is an effective method for the destruction of PFASs in an AFFF concentrate and an authentic sample of PFAS-contaminated soil derived from a decommissioned firefighting training facility. Both targeted analysis and non-targeted analysis were used in this study to evaluate the degradation of PFASs in complex substrates during MCD treatment. Destruction efficiencies of target PFAS subgroups ranged from 99.88% to 100%. The only additive employed for MCD treatment was quartz sand, which was used only for the liquid AFFF sample, with no additives required for the destruction of PFASs in the contaminated soil. This confirms the viability of MCD for both the remediation of PFAS-contaminated land and the destruction of stockpiled AFFFs.
ABSTRACT
Understanding the local-scale spatial and temporal variability of ozone formation is crucial for effective mitigation. We combine tropospheric vertical column densities (VCDTrop) of formaldehyde (HCHO) and nitrogen dioxide (NO2), referred to as HCHO-VCDTrop and NO2-VCDTrop, retrieved from airborne remote sensing and the TROPOspheric Monitoring Instrument (TROPOMI) with ground-based measurements to investigate changes in ozone precursors and the inferred chemical production regime on high-ozone days in May-August 2018 over two Northeast urban domains. Over New York City (NYC) and Baltimore/Washington D.C. (BAL/DC), HCHO-VCDTrop increases across the domain, but higher NO2-VCDTrop occurs mainly in urban centers on ozone exceedance days (when maximum daily 8 h average (MDA8) ozone exceeds 70 ppb at any monitor in the region). The ratio of HCHO-VCDTrop to NO2-VCDTrop, proposed as an indicator of the sensitivity of local surface ozone production rates to its precursors, generally increases on ozone exceedance days, implying a transition toward a more NOx-sensitive ozone production regime that should lead to higher efficacy of NOx controls on the highest ozone days in NYC and BAL/DC. Warmer temperatures and enhanced influence from emissions in the local boundary layer on the high-ozone days are accompanied by slower wind speeds in BAL/DC but stronger, southwesterly winds in NYC.
Subject(s)
Air Pollutants , Ozone , Ozone/chemistry , Nitrogen Dioxide/analysis , Air Pollutants/analysis , Environmental Monitoring , New EnglandABSTRACT
Anthropogenic nitrogen oxide (NOx) and volatile organic compound (VOC) emissions in the U.S. have declined substantially over the last decade, altering the NOx-VOC chemistry and ozone (O3) production characteristics of many areas. In this work we use multiple air quality analysis tools to assess how these large reductions in NOx and VOC have affected O3 production regimes across the U.S. between 2007 and 2016. We first compare observed and modeled evolution of NOx-limited and NOx-saturated O3 formation regimes using a day-of-week (DOW) analysis. This comparison builds confidence in the model's ability to qualitatively capture O3 changes due to chemistry and meteorology both within years and across periods of large emissions decreases. DOW analysis, however, cannot definitively differentiate between emissions and meteorology impacts. We therefore supplement this analysis with sensitivity calculations from CAMx-HDDM to characterize modeled shifts in O3 formation chemistry between 2007 and 2016 in different regions of the U.S. We also conduct a more detailed investigation of the O3 chemical behavior observed in Chicago and Detroit, two complex urban areas in the Midwest. Both the ambient and modeling data show that more locations across the U.S. have shifted towards NOx-limited regimes between 2007 and 2016. The model-based HDDM sensitivity analysis shows only a few locations remaining NOx-saturated on high-O3 days in 2016 including portions of New York City, Chicago, Minneapolis, San Francisco and Los Angeles. This work offers insights into the current state of O3 production chemistry in large population centers across the U.S., as well as how O3 chemistry in these areas may evolve in the future.
ABSTRACT
The release of persistent per- and polyfluoroalkyl substances (PFAS) into the environment is a major concern for the United States Environmental Protection Agency (U.S. EPA). To complement its ongoing research efforts addressing PFAS contamination, the U.S. EPA's Office of Research and Development (ORD) commissioned the PFAS Innovative Treatment Team (PITT) to provide new perspectives on treatment and disposal of high priority PFAS-containing wastes. During its six-month tenure, the team was charged with identifying and developing promising solutions to destroy PFAS. The PITT examined emerging technologies for PFAS waste treatment and selected four technologies for further investigation. These technologies included mechanochemical treatment, electrochemical oxidation, gasification and pyrolysis, and supercritical water oxidation. This paper highlights these four technologies and discusses their prospects and the development needed before potentially becoming available solutions to address PFAS-contaminated waste.Implications: This paper examines four novel, non-combustion technologies or applications for the treatment of persistent per- and polyfluoroalkyl substances (PFAS) wastes. These technologies are introduced to the reader along with their current state of development and areas for further development. This information will be useful for developers, policy makers, and facility managers that are facing increasing issues with disposal of PFAS wastes.
Subject(s)
Fluorocarbons , Water Pollutants, Chemical , Fluorocarbons/analysis , United States , United States Environmental Protection Agency , Water Pollutants, Chemical/analysisABSTRACT
Cairpol and Aeroqual air quality sensors measuring CO, CO2, NO2, and other species were tested in fresh biomass burning plumes in field and laboratory environments. We evaluated sensors by comparing 1-minute sensor measurements to collocated reference instrument measurements. Sensors were evaluated based on the coefficient of determination (r 2) between the sensor and reference measurements, by the accuracy, collocated precision, root mean square error (RMSE), and other metrics. In general, CO and CO2 sensors performed well (in terms of accuracy and r 2 values) compared to NO2 sensors. Cairpol CO and NO2 sensors had better sensor-versus-sensor agreement (e.g., collocated precision) than Aeroqual CO and NO2 sensors of the same species. Tests of other sensors (e.g., NH3, H2S, VOC, NMHC) provided more inconsistent results and need further study. Aeroqual NO2 sensors had an apparent O3 interference that was not observed in the Cairpol NO2 sensors. Although the sensor accuracy lags that of reference-level monitors, with location-specific calibrations they have the potential to provide useful data about community air quality and personal exposure to smoke impacts.
ABSTRACT
In recent years wildland fires in the United States have had significant impacts on local and regional air quality and negative human health outcomes. Although the primary health concerns from wildland fires come from fine particulate matter (PM2.5), large increases in ozone (O3) have been observed downwind of wildland fire plumes (DeBell et al., 2004; Bytnerowicz et al., 2010; Preisler et al., 2010; Jaffe et al., 2012; Bytnerowicz et al., 2013; Jaffe et al., 2013; Lu et al., 2016; Lindaas et al., 2017; McClure and Jaffe, 2018; Liu et al., 2018; Baylon et al., 2018; Buysse et al., 2019). Conditions generated in and around wildland fire plumes, including the presence of interfering chemical species, can make the accurate measurement of O3 concentrations using the ultraviolet (UV) photometric method challenging if not impossible. UV photometric method instruments are prone to interferences by volatile organic compounds (VOCs) that are present at high concentrations in wildland fire smoke. Four different O3 measurement methodologies were deployed in a mobile sampling platform downwind of active prescribed grassland fire lines in Kansas and Oregon and during controlled chamber burns at the United States Forest Service, Rocky Mountain Research Station Fire Sciences Laboratory in Missoula, Montana. We demonstrate that the Federal Reference Method (FRM) nitric oxide (NO) chemiluminescence monitors and Federal Equivalent Method (FEM) gas-phase (NO) chemical scrubber UV photometric O3 monitors are relatively interference-free, even in near-field combustion plumes. In contrast, FEM UV photometric O3 monitors using solid-phase catalytic scrubbers show positive artifacts that are positively correlated with carbon monoxide (CO) and total gas-phase hydrocarbon (THC), two indicator species of biomass burning. Of the two catalytic scrubber UV photometric methods evaluated, the instruments that included a Nafion® tube dryer in the sample introduction system had artifacts an order of magnitude smaller than the instrument with no humidity correction. We hypothesize that Nafion®-permeating VOCs (such as aromatic hydrocarbons) could be a significant source of interference for catalytic scrubber UV photometric O3 monitors and that the inclusion of a Nafion® tube dryer assists with the mitigation of these interferences. The chemiluminescence FRM method is highly recommended for accurate measurements of O3 in wildland fire plume studies and at regulatory ambient monitoring sites frequently impacted by wildland fire smoke.
ABSTRACT
Photolysis of nitrous acid (HONO) is recognized as an early-morning source of OH radicals in the urban air. During the Korea-US air quality (KORUS-AQ) campaign, HONO was measured using quantum cascade - tunable infrared laser differential absorption spectrometer (QC-TILDAS) at Olympic Park in Seoul from 17 May, 2016 to 14 June, 2016. The HONO concentration was in the range of 0.07-3.46 ppbv, with an average of 0.93 ppbv. Moreover, it remained high from 00:00-05:00 LST. During this time, the mean concentration was higher during the high-O3 episodes (1.82 ppbv) than the non-episodes (1.20 ppbv). In the morning, the OH radicals that were produced from HONO photolysis were 50% higher (0.95 pptv) during the high-O3 episodes than the non-episodes. Diurnal variations in HOx and O3 concentrations were simulated by the F0AM model, which revealed a difference of ~20 ppbv in the daily maximum O3 concentrations between the high-O3 episodes and non-episodes. Furthermore, the HONO concentration increased with an increase in relative humidity (RH) up to 80%; the highest HONO was associated with the top 10% NO2 in each RH group, confirming that NO2 is one of the main precursors of HONO. At night, the conversion ratio of NO2 to HONO was estimated to be 0.88×10-2 h-1; this ratio was found to increase with an increase in RH. The Aitken mode particles (30-120 nm), which act as catalyst surfaces, exhibited a similar tendency with a conversion ratio that increased along with RH, indicating the coupling of surfaces with HONO conversion. Using an artificial neural network (ANN) model, HONO concentrations were successfully simulated with measured variables (r2 = 0.66 as an average of five models). Among these variables, NOx, aerosol surface area, and RH were found to be the main factors affecting the ambient HONO concentrations. The results reveal that RH facilitates the conversion of NO2 to HONO by constraining the availability of aerosol surfaces. This study demonstrates the coupling of HONO with the HOx-O3 cycle in the Seoul Metropolitan Area (SMA) and provides practical evidence of the heterogeneous formation of HONO by employing the ANN model.
ABSTRACT
Analysis of formaldehyde measurements by the Pandora spectrometer systems between 2016 and 2019 suggested that there was a temperature dependent process inside Pandora head sensor that emitted formaldehyde. Some parts in the head sensor were manufactured from thermal plastic polyoxymethylene homopolimer (E.I. Du Pont de Nemour & Co., USA: POM-H Delrin®) and were responsible for formaldehyde production. Laboratory analysis of the four Pandora head sensors showed that internal formaldehyde production had exponential temperature dependence with a damping coefficient of 0.0911±0.0024 °C-1 and the exponential function amplitude ranging from 0.0041 DU to 0.049 DU. No apparent dependency on the head sensor age and heating/cooling rates was detected. The total amount of formaldehyde internally generated by the POM-H Delrin components and contributing to the direct sun measurements were estimated based on the head sensor temperature and solar zenith angle of the measurements. Measurements in winter, during colder (<10°C) days in general and at high solar zenith angles (> 75 °) were minimally impacted. Measurements during hot days (>28°C) and small solar zenith angles had up to 1 DU (2.69×1016 molecules/cm2) contribution from POM-H Delrin parts. Multi-axis differential slant column densities were minimally impacted (< 0.01 DU) due to the reference spectrum collected within a short time period with a small difference in head sensor temperature. Three new POM-H Delrin free Pandora head sensors (manufactured in summer 2019) were evaluated for temperature dependent attenuation across the entire spectral range (300 to 530 nm). No formaldehyde or any other absorption above the instrumental noise was observed across the entire spectral range.
ABSTRACT
The Lake Michigan Ozone Study 2017 (LMOS 2017) was a collaborative multiagency field study targeting ozone chemistry, meteorology, and air quality observations in the southern Lake Michigan area. The primary objective of LMOS 2017 was to provide measurements to improve air quality modeling of the complex meteorological and chemical environment in the region. LMOS 2017 science questions included spatiotemporal assessment of nitrogen oxides (NO x = NO + NO2) and volatile organic compounds (VOC) emission sources and their influence on ozone episodes; the role of lake breezes; contribution of new remote sensing tools such as GeoTASO, Pandora, and TEMPO to air quality management; and evaluation of photochemical grid models. The observing strategy included GeoTASO on board the NASA UC-12 aircraft capturing NO2 and formaldehyde columns, an in situ profiling aircraft, two ground-based coastal enhanced monitoring locations, continuous NO2 columns from coastal Pandora instruments, and an instrumented research vessel. Local photochemical ozone production was observed on 2 June, 9-12 June, and 14-16 June, providing insights on the processes relevant to state and federal air quality management. The LMOS 2017 aircraft mapped significant spatial and temporal variation of NO2 emissions as well as polluted layers with rapid ozone formation occurring in a shallow layer near the Lake Michigan surface. Meteorological characteristics of the lake breeze were observed in detail and measurements of ozone, NOx, nitric acid, hydrogen peroxide, VOC, oxygenated VOC (OVOC), and fine particulate matter (PM2.5) composition were conducted. This article summarizes the study design, directs readers to the campaign data repository, and presents a summary of findings.
ABSTRACT
Water above 374 °C and 22.1 MPa, becomes supercritical, a special state where organic solubility increases and oxidation processes are accelerated. Supercritical water oxidation (SCWO) has been previously shown to destroy hazardous substances such as halogenated compounds. Three separate providers of SCWO technology were contracted to test the efficacy of SCWO systems to reduce per- and poly-fluoroalkyl substances (PFAS) concentrations from solutions of dilute aqueous film-forming foam (AFFF). The findings of all three demonstration studies, showed greater than 99% reduction of the total PFAS identified in a targeted-compound analysis, including perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA). PFOS was reduced from 26.2 mg/L to 240 µg/L, 30.4 mg/L to 0.310 µg/L, and 190 mg/L to 8.57 µg/L, from the Aquarden, Battelle, and 374Water demonstrations, respectively. Similarly, PFOA was reduced from 930 to 0.14 µg/L, 883 to 0.102 µg/L, and 3,100 µg/L to non-detect in the three evaluations. Additionally, chemical oxygen demand of the dilute AFFF was shown to reduce from 4,750 to 5.17 mg/L after treatment, indicating significant organic compound destruction. In one demonstration, a mass balance of the influent and effluent found that the targeted compounds accounted for only 27% of the generated fluoride, suggesting that more PFAS were destroyed than measured and emphasizing the limitations of targeted analysis alone. As a destructive technology, SCWO may be an alternative to incineration and could be a permanent solution for PFAS-laden wastewaters rather than disposal by injection into a deep-well or landfilling. Additional investigation of reaction by-products remains to be conducted for a complete assessment of SCWO's potential as a safe and effective PFAS treatment technology.
ABSTRACT
To understand the characteristics of air quality in the Seoul Metropolitan Area, intensive measurements were conducted under the Korea-United States Air Quality (KORUS-AQ) campaign. Trace gases such as O3, NOx, NOy, SO2, CO, and volatile organic compounds (VOCs), photochemical byproducts such as H2O2 and HCHO, aerosol species, and meteorological variables including planetary boundary layer height were simultaneously measured at Olympic Park in Seoul. During the measurement period, high O3 episodes that exceeded the 90 ppbv hourly maximum occurred on 14 days under four distinct synoptic meteorological conditions. Furthermore, local circulation such as land-sea breeze and diurnal evolution of the boundary layer were crucial in determining the concentrations of precursor gases, including NOx and VOC as well as O3. During such episodes, the nighttime NOx and VOC and daytime UV levels were higher compared to non-episode days. The overall precursor levels and photochemical activity were represented fairly well by variations in the HCHO, which peaked in the morning during the high O3 episodes. This study revealed that toluene was the most abundant VOC in Seoul, and its concentration increased greatly with NOx due to the large local influence under stagnant conditions. When O3 was highly elevated concurrently with PM2.5 under dominant westerlies, NOx and VOCs were relatively lower and CO was noticeably higher than in other episodes. Additionally, the O3 production efficiency was the highest due to a low NOx with the highest NOz/NOy ratio among the four episodes. When westerlies were dominant in transport-south episode, the nighttime concentration of O 3 remained as high as 40~50 ppbv due to the minimum level of NOx titration. Overall, the Seoul Metropolitan Area is at NOx-saturated and VOC-limited conditions, which was diagnosed by indicator species and VOC/NOx ratios.
ABSTRACT
Mobile mapping of air pollution has the potential to provide pollutant concentration data at unprecedented spatial scales. Characterizing instrument performance in the mobile context is challenging, but necessary to analyze and interpret the resulting data. We used robust statistical methods to assess mobile platform performance using data collected with the Aclima Inc. mobile air pollution measurement and data acquisition platform installed on three Google Street View cars. They were driven throughout the greater Denver metropolitan area between July 25, 2014 and August 14, 2014, measuring ozone (O3), nitrogen dioxide (NO2), nitric oxide (NO), black carbon (BC), and size-resolve particle number counts (PN) between 0.3 µm and 5.0 µm diameter. August 6, 2014 was dedicated to parked and moving collocations among the three cars, allowing an assessment of measurement precision and bias. We used the median absolute deviation (MAD) to estimate instrument precision from outdoor, parked collocations. Bias was assessed by measurements obtained from parked cars using the standard deviation of median values over a collocated measurement period, as well as by Passing-Bablok regression statistics while the cars were moving and collocated. For the moving collocation periods, we compared the distribution of 1-σ standard deviations among the 3 cars to the estimated distribution assuming only measurement uncertainty (precision and bias). The distribution of mobile measurements agreed well with the theoretical uncertainty distribution at the lower end of the distribution for O3, NO2, and PN. We assert that the difference between the actual and theoretical distributions is due to real spatial variability between pollutants. The agreement between the parked car estimates of uncertainty and that measured during the mobile collocations (at the lower quantiles) provides evidence that on-road collocation while parked could be sufficient for estimating measurement uncertainties of a mobile platform, even when extended to the moving environment.
ABSTRACT
The Korea - United States Air Quality Study (May - June 2016) deployed instrumented aircraft and ground-based measurements to elucidate causes of poor air quality related to high ozone and aerosol concentrations in South Korea. This work synthesizes data pertaining to aerosols (specifically, particulate matter with aerodynamic diameters <2.5 micrometers, PM2.5) and conditions leading to violations of South Korean air quality standards (24-hr mean PM2.5 < 35 µg m-3). PM2.5 variability from AirKorea monitors across South Korea is evaluated. Detailed data from the Seoul vicinity are used to interpret factors that contribute to elevated PM2.5. The interplay between meteorology and surface aerosols, contrasting synoptic-scale behavior vs. local influences, is presented. Transboundary transport from upwind sources, vertical mixing and containment of aerosols, and local production of secondary aerosols are discussed. Two meteorological periods are probed for drivers of elevated PM2.5. Clear, dry conditions, with limited transport (Stagnant period), promoted photochemical production of secondary organic aerosol from locally emitted precursors. Cloudy humid conditions fostered rapid heterogeneous secondary inorganic aerosol production from local and transported emissions (Transport/Haze period), likely driven by a positive feedback mechanism where water uptake by aerosols increased gas-to-particle partitioning that increased water uptake. Further, clouds reduced solar insolation, suppressing mixing, exacerbating PM2.5 accumulation in a shallow boundary layer. The combination of factors contributing to enhanced PM2.5 is challenging to model, complicating quantification of contributions to PM2.5 from local versus upwind precursors and production. We recommend co-locating additional continuous measurements at a few AirKorea sites across South Korea to help resolve this and other outstanding questions: carbon monoxide/carbon dioxide (transboundary transport tracer), boundary layer height (surface PM2.5 mixing depth), and aerosol composition with aerosol liquid water (meteorologically-dependent secondary production). These data would aid future research to refine emissions targets to further improve South Korean PM2.5 air quality.
ABSTRACT
Prescribed pasture burning plays a critical role in ecosystem maintenance in tallgrass prairie ecosystems and may contribute to agricultural productivity but can also have negative impacts on air quality. Volatile organic compound (VOC) concentrations were measured immediately downwind of prescribed tallgrass prairie fires in the Flint Hills region of Kansas, United States. The VOC mixture is dominated by alkenes and oxygenated VOCs, which are highly reactive and can drive photochemical production of ozone downwind of the fires. The computed emission factors are comparable to those previous measured from pasture maintenance fires in Brazil. In addition to the emission of large amounts of particulate matter, hazardous air pollutants such as benzene and acrolein are emitted in significant amounts and could contribute to adverse health effects in exposed populations.
ABSTRACT
The Korea-United States Air Quality Study (KORUS-AQ) conducted during May-June 2016 offered the first opportunity to evaluate direct-sun observations of formaldehyde (HCHO) total column densities with improved Pandora spectrometer instruments. The measurements highlighted in this work were conducted both in the Seoul megacity area at the Olympic Park site (37.5232° N, 27.1260° E; 26 ma.s.l.) and at a nearby rural site downwind of the city at the Mount Taehwa research forest site (37.3123° N, 127.3106° E; 160ma.s.l.). Evaluation of these measurements was made possible by concurrent ground-based in situ observations of HCHO at both sites as well as overflight by the NASA DC-8 research aircraft. The flights provided in situ measurements of HCHO to characterize its vertical distribution in the lower troposphere (0-5km). Diurnal variation in HCHO total column densities followed the same pattern at both sites, with the minimum daily values typically observed between 6:00 and 7:00 local time, gradually increasing to a maximum between 13:00 and 17:00 before decreasing into the evening. Pandora vertical column densities were compared with those derived from the DC-8 HCHO in situ measured profiles augmented with in situ surface concentrations below the lowest altitude of the DC-8 in proximity to the ground sites. A comparison between 49 column densities measured by Pandora vs. aircraft-integrated in situ data showed that Pandora values were larger by 16% with a constant offset of 0.22DU (Dobson units; R 2 = 0.68). Pandora HCHO columns were also compared with columns calculated from the surface in situ measurements over Olympic Park by assuming a well-mixed lower atmosphere up to a ceilometer-measured mixed-layer height (MLH) and various assumptions about the small residual HCHO amounts in the free troposphere up to the tropopause. The best comparison (slope = 1.03±0.03; intercept = 0.29±0.02DU; and R 2 = 0.78±0.02) was achieved assuming equal mixing within ceilometer-measured MLH combined with an exponential profile shape. These results suggest that diurnal changes in HCHO surface concentrations can be reasonably estimated from the Pandora total column and information on the mixed-layer height. More work is needed to understand the bias in the intercept and the slope relative to columns derived from the in situ aircraft and surface measurements.
ABSTRACT
Millimeter-wave detected, millimeter-wave optical double resonance (mmODR) spectroscopy is a powerful tool for the analysis of dense, complicated regions in the optical spectra of small molecules. The availability of cavity-free microwave and millimeter wave spectrometers with frequency-agile generation and detection of radiation (required for chirped-pulse Fourier-transform spectroscopy) opens up new schemes for double resonance experiments. We demonstrate a multiplexed population labeling scheme for rapid acquisition of double resonance spectra, probing multiple rotational transitions simultaneously. We also demonstrate a millimeter-wave implementation of the coherence-converted population transfer scheme for background-free mmODR, which provides a â¼10-fold sensitivity improvement over the population labeling scheme. We analyze perturbations in the CÌ state of SO2, and we rotationally assign a b2 vibrational level at 45,328 cm(-1) that borrows intensity via a c-axis Coriolis interaction. We also demonstrate the effectiveness of our multiplexed mmODR scheme for rapid acquisition and assignment of three predissociated vibrational levels of the CÌ state of SO2 between 46,800 and 47,650 cm(-1).
ABSTRACT
Nitrous oxide is an important greenhouse gas and ozone-depleting-substance. Its sources are diffuse and poorly characterized, complicating efforts to understand anthropogenic impacts and develop mitigation policies. Online, spectroscopic analysis of N2O isotopic composition can provide continuous measurements at high time resolution, giving new insight into N2O sources, sinks, and chemistry. We present a new preconcentration unit, "Stheno II", coupled to a tunable infrared laser direct absorption spectroscopy (TILDAS) instrument, to measure ambient-level variations in (18)O and site-specific (15)N N2O isotopic composition at remote sites with a temporal resolution of <1 h. Trapping of N2O is quantitative up to a sample size of â¼4 L, with an optimal sample size of 1200-1800 mL at a sampling frequency of 28 min. Line shape variations with the partial pressure of the major matrix gases N2/O2 and CO2 are measured, and show that characterization of both pressure broadening and Dicke narrowing is necessary for an optimal spectral fit. Partial pressure variations of CO2 and bath gas result in a linear isotopic measurement offset of 2.6-6.0 mbar(-1). Comparison of IR MS and TILDAS measurements shows that the TILDAS technique is accurate and precise, and less susceptible to interferences than IR MS measurements. Two weeks of measurements of N2O isotopic composition from Cambridge, MA, in May 2013 are presented. The measurements show significant short-term variability in N2O isotopic composition larger than the measurement precision, in response to meteorological parameters such as atmospheric pressure and temperature.
ABSTRACT
Signatures of mass-independent isotope fractionation (MIF) are found in the oxygen ((16)O,(17)O,(18)O) and sulfur ((32)S, (33)S, (34)S, (36)S) isotope systems and serve as important tracers of past and present atmospheric processes. These unique isotope signatures signify the breakdown of the traditional theory of isotope fractionation, but the physical chemistry of these isotope effects remains poorly understood. We report the production of large sulfur isotope MIF, with Δ(33)S up to 78 and Δ(36)S up to 110, from the broadband excitation of SO2 in the 250-350-nm absorption region. Acetylene is used to selectively trap the triplet-state SO2 ( (3)B1), which results from intersystem crossing from the excited singlet ( (1)A2/ (1)B1) states. The observed MIF signature differs considerably from that predicted by isotopologue-specific absorption cross-sections of SO2 and is insensitive to the wavelength region of excitation (above or below 300 nm), suggesting that the MIF originates not from the initial excitation of SO2 to the singlet states but from an isotope selective spin-orbit interaction between the singlet ( (1)A2/ (1)B1) and triplet ( (3)B1) manifolds. Calculations based on high-level potential energy surfaces of the multiple excited states show a considerable lifetime anomaly for (33)SO2 and (36)SO2 for the low vibrational levels of the (1)A2 state. These results demonstrate that the isotope selectivity of accidental near-resonance interactions between states is of critical importance in understanding the origin of MIF in photochemical systems.