ABSTRACT
BACKGROUND: To improve understanding of the antibody response to SARS-CoV-2 infection, we examined seroprevalence, incidence of infection, and seroconversion among a cohort of young adults living on university campuses during the fall of 2020. METHODS: At the beginning (semester start) and end (semester end) of an 11-week period, serum collected from 107 students was tested using the qualitative Abbott Architect SARS-CoV-2 IgG and AdviseDx SARS-CoV-2 IgG II assays. Results were matched to interim weekly surveillance viral testing and symptom data. RESULTS: With the SARS-CoV-2 IgG assay, 15 (14.0%) students were seropositive at semester start; 29 (27.1%) students were seropositive at semester end; 10 (9.3%) were seropositive at both times. With the AdviseDx SARS-CoV-2 IgG II assay, 17 (16.3%) students were seropositive at semester start, 37 (35.6%) were seropositive at semester end, and 16 (15.3%) were seropositive at both times. Overall, 23 students (21.5%) had positive viral tests during the semester. Infection was identified by serial testing in a large majority of individuals who seroconverted using both assays. Those seropositive at semester end more frequently reported symptomatic infections (56.5%) than asymptomatic infections (30.4%). CONCLUSION: Differences between antibody targets were observed, with more declines in antibody index values below the threshold of positivity with the anti-nucleocapsid assay compared to the anti-spike assay. Serology testing, combined with serial viral testing, can detect seroconversions, and help understand the potential correlates of protection provided by antibodies to SARS-CoV-2.
Subject(s)
COVID-19 , SARS-CoV-2 , Antibodies, Viral , COVID-19/diagnosis , COVID-19/epidemiology , Cohort Studies , Enzyme-Linked Immunosorbent Assay , Humans , Seroconversion , Seroepidemiologic Studies , Students , UniversitiesABSTRACT
Ending the hepatitis C virus (HCV) epidemic requires stopping transmission among networks of persons who inject drugs. Identifying transmission networks by using genomic epidemiology may inform community responses that can quickly interrupt transmission. We retrospectively identified HCV RNA-positive specimens corresponding to 459 persons in settings that use the state laboratory, including correctional facilities and syringe services programs, in Wisconsin, USA, during 2016-2017. We conducted next-generation sequencing of HCV and analyzed it for phylogenetic linkage by using the Centers for Disease Control and Prevention Global Hepatitis Outbreak Surveillance Technology platform. Analysis showed that 126 persons were linked across 42 clusters. Phylogenetic clustering was higher in rural communities and associated with female sex and younger age among rural residents. These data highlight that HCV transmission could be reduced by expanding molecular-based surveillance strategies to rural communities affected by the opioid crisis.
Subject(s)
Drug Users , Hepatitis C , Substance Abuse, Intravenous , Female , Hepacivirus/genetics , Hepatitis C/epidemiology , Humans , Phylogeny , Prisons , Public Health , Retrospective Studies , Substance Abuse, Intravenous/epidemiology , Wisconsin/epidemiologyABSTRACT
Mild traumatic brain injuries are typically caused by nonpenetrating head impacts that accelerate the skull and result in deformation of the brain within the skull. The shear and compressive strains caused by these deformations damage neural and vascular structures and impair their function. Accurate head acceleration measurements are necessary to define the nature of the insult to the brain. A novel murine head tracking system was developed to improve the accuracy and efficiency of kinematic measurements obtained with high-speed videography. A three-dimensional (3D)-printed marker carrier was designed for rigid fixation to the upper jaw and incisors with an elastic strap around the snout. The system was evaluated by impacting cadaveric mice with the closed head impact model of engineered rotational acceleration (CHIMERA) system using an energy of 0.7 J (5.29 m/s). We compared the performance of the head-marker system to the previously used skin-tracking method and documented significant improvements in measurement repeatability (aggregate coefficient of variation (CV) within raters from 15.8 to 1.5 and between raters from 15.5 to 1.5), agreement (aggregate percentage error from 24.9 to 8.7), and temporal response (aggregate temporal curve agreement from 0.668 to 0.941). Additionally, the new system allows for automated software tracking, which dramatically decreases the analysis time required (74% reduction). This novel head tracking system for mice offers an efficient, reliable, and real-time method to measure head kinematics during high-speed impacts using CHIMERA or other rodent or small mammal head impact models.
Subject(s)
Brain Concussion , Acceleration , Biomechanical Phenomena , RotationABSTRACT
OBJECTIVES: The prevalence of infections caused by OXA-48-like carbapenemase-producing organisms in Ireland has increased dramatically since 2011 and is an urgent public health issue. Genome-based high-resolution genotyping was used to analyse clinical isolates submitted to the Irish Carbapenemase-Producing Enterobacteriaceae Reference Laboratory Service for a 13 month period (2016-17). METHODS: A total of 109 OXA-48-producing non-duplicate clinical isolates from 16 submitting centres were sequenced. Using a gene-by-gene approach, isolate genomes were characterized by MLST and core genome MLST, and the presence of antimicrobial resistance determinants was determined. Reference mapping and a novel plasmid MLST-type approach was applied to determine plasmid background. RESULTS: The OXA-48-like-producing isolates were Escherichia coli (nâ=â56), Klebsiella spp. (nâ=â46) and Enterobacter cloacae (nâ=â7). Amongst the E. coli isolates there were 37 different STs and amongst the Klebsiella spp. isolates there were 27 different STs. blaOXA-48 was present in 105/109 (96.3%) of isolates. Based on mapping analysis and detection of the pOXA-48 IncL-type plasmid replicon and backbone genes, a pOXA-48-like plasmid was identified in 93/109 isolates (85.3%). The remaining isolates (nâ=â16; 14.7%) harboured blaOXA-48-like genes in unknown environments. Using a gene-by-gene approach two pOXA-48-like plasmid groups with 2/71 pOXA-48-like locus differences between them were identified. CONCLUSIONS: In Ireland we found a diversity of genotypes associated with OXA-48-like-producing clinical isolates with the IncL pOXA-48 plasmid type predominating as the blaOXA-48 genetic environment. A plasmid MLST approach can rapidly identify plasmids associated with outbreaks and monitor spread of types temporally and geographically.
Subject(s)
Bacterial Proteins/genetics , Carbapenem-Resistant Enterobacteriaceae/isolation & purification , Disease Outbreaks , Enterobacteriaceae Infections/epidemiology , Genotype , Multilocus Sequence Typing/methods , Plasmids/analysis , beta-Lactamases/genetics , Carbapenem-Resistant Enterobacteriaceae/classification , Carbapenem-Resistant Enterobacteriaceae/enzymology , Carbapenem-Resistant Enterobacteriaceae/genetics , Enterobacteriaceae Infections/microbiology , Humans , Ireland/epidemiology , Molecular Epidemiology/methods , Prevalence , Sequence Analysis, DNAABSTRACT
Although spinal cord deformation is thought to be a predictor of injury severity, few researchers have investigated dynamic cord deformation, in vivo, during impact. This is needed to establish correlations among impact parameters, internal cord deformation, and histological and functional outcomes. Relying on surface deformations alone may not sufficiently represent spinal cord deformation. The objective of this study was to develop a high-speed fluoroscopic method of tracking the surface and internal cord deformations of rat spinal cord during experimental cord injury. Two radio-opaque beads were injected into the cord at C5/6 in the dorsal and ventral white matter. Four additional beads were glued to the surface of the cord. Dynamic bead displacement was tracked during a dorsal impact (130 mm/sec, 1 mm depth) by high-speed radiographic imaging at 3000 FPS, laterally. The internal spinal cord beads displaced significantly more than the surface beads in the ventral direction (1.1-1.9 times) and more than most surface beads in the cranial direction (1.2-1.5 times). The dorsal beads (internal and surface) displaced more than the ventral beads during all impacts. The bead displacement pattern implies that the spinal cord undergoes complex internal and surface deformations during impact. Residual displacement of the internal beads was significantly greater than that of the surface beads in the cranial-caudal direction but not the dorsoventral direction. Finite element simulation confirmed that the additional bead mass likely had little effect on the internal cord deformations. These results support the merit of this technique for measuring in vivo spinal cord deformation.
Subject(s)
Fluoroscopy/methods , Neuroimaging/methods , Spinal Cord Injuries/pathology , Animals , Disease Models, Animal , Rats , Rats, Sprague-DawleyABSTRACT
We report here the full coding sequence of nine paramyxovirus genomes, including two full-length mumps virus genomes (genotypes G and H) and seven measles virus genomes (genotypes B3 and D4, D8, and D9), from respiratory samples of patients from California, Virginia, and Alabama obtained between 2010 and 2014.
ABSTRACT
OBJECTIVE: Facial impacts are both common and injurious for helmeted motorcyclists who crash; however, there is no facial impact requirement in major motorcycle helmet standards. This study examined the effect of full-face motorcycle helmet protection on brain injury risk in facial impacts using a test device with biofidelic head and neck motion. A preliminary investigation of energy absorbing foam in the helmet chin bar was carried out. METHOD: Flat-faced rigid pendulum impacts were performed on a THOR dummy in an unprotected (no helmet) and protected mode (two full-face helmet conditions). The head responses of the dummy were input into the simulated injury monitor finite element head model to analyse the risk of brain injury in these impacts. RESULTS: Full-face helmet protection provides a significant reduction in brain injury risk in facial impacts at increasing impact speeds compared with an unprotected rider (p<0.05). The effect of low-density crushable foam added to the chin bar could not be distinguished from an unpadded chin bar impact. CONCLUSIONS: Despite the lack of an impact attenuation requirement for the face, full-face helmets do provide a reduction in head injury risk to the wearer in facial impacts. The specific helmet design factors that influence head injury risk in facial impacts need further investigation if improved protection for helmeted motorcyclists is to be achieved.
Subject(s)
Accidents, Traffic , Brain Injuries/prevention & control , Equipment Design/standards , Facial Injuries/prevention & control , Finite Element Analysis , Head Protective Devices/standards , Motorcycles , Head Protective Devices/statistics & numerical data , Humans , Injury Severity Score , Manikins , Materials TestingABSTRACT
Despite an improved understanding of traumatic head and neck injury mechanisms, the impact tests required by major motorcycle helmet standards have remained unchanged for decades. Development of new test methods must reflect the specific impact loads causing injury in real crashes as well as test criteria appropriate for the observed injury profiles. This study analysed a collection of in-depth crash investigations of fatally injured helmeted riders in the Adelaide metropolitan region between 1983 and 1994 inclusive to review the head and neck injury patterns that resulted from specific types of impact. Inertial brain injury was sustained in 49% of examined cases, most often resulting from facial impacts but also in a large proportion of tangential, run over, and occipital impact cases. Focal brain and brainstem injury was also common (53%) and regularly associated with skull vault (11/12) and skull base fractures (22/31). Prevention of these fractures in impacts outside the area of required protection and in impacts with a straight edge would provide a significant increase in helmeted rider protection. Cervical spinal cord injury was sustained in facial, straight edge, and tangential impacts on the head. Motorcycle helmets are effective for preventing local skull fractures in impacts for which they are designed, whereas other serious injuries such as basilar skull fracture (BSF) and inertial brain injury persist despite helmet protection. Further impact test procedures should be developed for injurious impact types not currently assessed by major helmet standards, in particular facial impacts, and using test criteria based on commonly observed injuries. This study provides the necessary link, from impact load to injury, for guiding impact test development.
ABSTRACT
In this study, a multicenter evaluation of the Life Technologies TaqMan(®) Array Card (TAC) with 21 custom viral and bacterial respiratory assays was performed on the Applied Biosystems ViiA™ 7 Real-Time PCR System. The goal of the study was to demonstrate the analytical performance of this platform when compared to identical individual pathogen specific laboratory developed tests (LDTs) designed at the Centers for Disease Control and Prevention (CDC), equivalent LDTs provided by state public health laboratories, or to three different commercial multi-respiratory panels. CDC and Association of Public Health Laboratories (APHL) LDTs had similar analytical sensitivities for viral pathogens, while several of the bacterial pathogen APHL LDTs demonstrated sensitivities one log higher than the corresponding CDC LDT. When compared to CDC LDTs, TAC assays were generally one to two logs less sensitive depending on the site performing the analysis. Finally, TAC assays were generally more sensitive than their counterparts in three different commercial multi-respiratory panels. TAC technology allows users to spot customized assays and design TAC layout, simplify assay setup, conserve specimen, dramatically reduce contamination potential, and as demonstrated in this study, analyze multiple samples in parallel with good reproducibility between instruments and operators.