ABSTRACT
Subcutaneous immunization with SYI, a peptide construct based on Streptococcus mutans glucan binding protein B (GbpB) residues 113-132, significantly reduces experimental dental caries. Since mucosal immunization may be preferred for human vaccine applications, the present objective was to determine what formulation of SYI combined with polylactide-coglycolide microparticles could give rise to significant levels of salivary IgA antibody reactive with the native GbpB protein. A comparison of the SYI construct, loaded into or mixed with polylactide-coglycolide revealed the SYI-loaded microparticles to induce significant and sustainable levels of salivary and nasal wash IgA antibody to the peptide and the native protein. SYI mixed with unloaded microparticles was less effective in mucosal antibody response induction. These studies indicate that mucosal immunization with the SYI construct can induce salivary IgA antibody to a pathogenesis-associated component of S. mutans if delivered within polylactide-coglycolide microparticles, suggesting that this approach could successfully induce protective salivary immunity to dental caries caused by S. mutans.
Subject(s)
Antigens, Bacterial/immunology , Bacterial Proteins/immunology , Bacterial Vaccines/immunology , Glycoproteins/immunology , Saliva/immunology , Streptococcus mutans/immunology , Animals , Dental Caries/prevention & control , Particle Size , Rats , Rats, Sprague-Dawley , Streptococcus mutans/drug effectsABSTRACT
Pain is the most common and feared symptom for patients, especially those with cancer. Treatment of chronic pain with conventional ways of medication usually fails with increasing severity of the pain. New approaches enabling the prolonged provision of pain relievers are required. We designed a controlled release system of pain relievers, mainly for opioids (morphine, M, codeine, C, and hydromorphone, HM), and a local anesthetic (bupivacaine, BP) in the form of poly(L-lactide-co-glycolide) (PLGA) rods. The efficacy of these rods implanted alone or in combination in relieving chronic pain in rats caused by the ligation of the sciatic nerve of their right hind limbs was studied. The two most common tests for measuring analgesia, i.e. tail-flick tests, that show analgesia at sites other than the site of injury, were used to study the degree of systemic distribution of the drugs and paw-withdrawal tests were used to study the analgesia at the site of injury. Alleviation of this chronic and severe neuropathic pain could be obtained for about 3-4 days when rods for two drugs, 'dual drug' (analgesic-anesthetic), were used. This duration is decreased by half (2 days) with the single-drug rods. Also the dual-drug rods, though at half the dose of each single drug application, enhanced the degree of analgesia of the first day. These in vivo results are also consistent with the previous in vitro results as in the case with codeine which had a higher first-day analgesia than morphine, despite a lower potency due to the faster in vitro release rate. Similarly, slower release of hydromorphone from PLGA (85:15) rods resulted in less systemic analgesia than the more rapidly eroding PLGA (50:50) rods of the same drug.
Subject(s)
Analgesics, Opioid/administration & dosage , Anesthetics, Local/administration & dosage , Drug Implants/administration & dosage , Pain/drug therapy , Animals , Behavior, Animal/drug effects , Biocompatible Materials , Biodegradation, Environmental , Bupivacaine/administration & dosage , Codeine/administration & dosage , Codeine/therapeutic use , Drug Delivery Systems/methods , Female , Hydromorphone/administration & dosage , Lactic Acid/chemistry , Lactic Acid/metabolism , Morphine/administration & dosage , Polyglycolic Acid/chemistry , Polyglycolic Acid/metabolism , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers/chemistry , Polymers/metabolism , Rats , Rats, Sprague-Dawley , Time FactorsABSTRACT
Intranasally administered dental caries vaccines show significant promise for human application. Alternate mucosal routes may be required, however, to induce caries-protective salivary IgA antibody in children with respiratory diseases. Since rectal mucosa contains inductive lymphoid tissue, we hypothesized that the rectal route could be used to induce salivary immunity to mutans streptococcal glucosyltransferase (GTF), resulting in protective immunity to experimental dental caries. We first explored the ability of glucosyltransferase, incorporated into polylactide-co-glycolide (PLGA) microparticles (MP), and administered rectally together with mucosal adjuvant, to induce a salivary IgA antibody response. Groups of Sprague-Dawley rats (6/group) were immunized rectally on days 0, 7, 14 and 21 with a) GTF-MP alone, b) GTF-MP with cholera toxin, c) GTF-MP with detoxified mutant Escherichia coli toxin (dLT), or d) sham immunized with PLGA and cholera toxin. An additional group was immunized intranasally with GTF-MP alone. Saliva and nasal washes of all intranasally immunized rats contained IgA antibody to glucosyltransferase on day 28. Salivary IgA antibody was also detected in 7/12 rats rectally immunized with GTF-MP and cholera toxin or dLT, although responses were lower than those obtained by intranasal immunization. Most fecal extracts from rectally delivered GTF-MP plus cholera toxin or dLT rats contained IgA antibody to GTF-MP. Low levels of fecal IgA antibody were detected in 3/6 intranasally immunized rats and 2/6 rats rectally immunized with GTF-MP alone. We then examined the extent to which salivary IgA antibody induced by the rectal route could be protective. At 25, 31 and 38 days of age, two groups of female Sprague-Dawley rats (13/group) were rectally immunized with GTF-MP and cholera toxin or with empty microparticles and cholera toxin (sham group). A third group was intranasally immunized with GTF-MP alone. After demonstrating salivary IgA responses to GTF in most GTF-immunized rats, all animals were infected with streptomycin-resistant Streptococcus sobrinus and placed on diet 2000. After 79 days of infection, total caries on molar surfaces were lower in both rectally (7.9 +/- 1.0) and intranasally (7.1 +/- 0.9; P < 0.0.03) immunized groups compared with the sham-immunized group (11.9 +/- 1.6). Smooth surface caries were significantly lower (P < 0.05) in both rectally and intranasally immunized groups. These results support the interconnectedness of the mucosal immune system and indicate that rectal immunization with GTF-MP, together with adjuvant, or intranasal immunization with GTF-MP alone, can induce protective levels of salivary antibody in rats.
Subject(s)
Antibodies, Bacterial/biosynthesis , Dental Caries/prevention & control , Glucosyltransferases/immunology , Saliva/immunology , Streptococcal Vaccines/administration & dosage , Administration, Rectal , Animals , Dental Caries/immunology , Female , Immunity, Mucosal , Immunoglobulin A, Secretory/biosynthesis , Lactic Acid , Polyglycolic Acid , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers , Rats , Rats, Sprague-Dawley , Streptococcus mutans/immunology , Streptococcus sobrinus/enzymologyABSTRACT
Intraspinal drug delivery, based on the concept of controlling pain by delivering drug to a nociceptive target rich in opioid and other relevant receptors is increasingly used clinically. The therapeutic ratio for opioids or other centrally acting agents is potentially greater if they are administered intrathecally (i.t.) than outside the central nervous system (CNS). The present study was designed with the ultimate goal of formulating a controlled release system for intrathecal analgesia characterized by effectiveness, rapid onset and few side effects for chronic pain control. A biodegradable copolymer poly(L-lactide-co-glycolide) (PLGA) was used to prepare a rod-shaped drug delivery system containing hydromorphone (HM), bupivacaine (BP), both HM and BP, or biphalin (BI). In vitro drug release kinetics of these systems showed a zero-order release rate for HM and BP from PLGA (85:15) rods. Drug-loaded rods were implanted i.t. Control groups received only placebo implants. Measurement of analgesic efficacy was carried out with tail flick and paw-withdrawal tests. In vivo studies showed potent, prolonged analgesia in comparison to controls for all active treatments. Analgesic synergy was observed with HM and BP. With further refinements of drug release rate, these rods may offer a clinically relevant alternative for intrathecal analgesia.
Subject(s)
Bupivacaine/administration & dosage , Drug Implants/administration & dosage , Enkephalins/administration & dosage , Hydromorphone/administration & dosage , Injections, Spinal/methods , Lactic Acid , Pain/drug therapy , Polyglycolic Acid , Polymers , Analgesics/administration & dosage , Animals , Drug Delivery Systems/methods , Male , Pain Measurement/methods , Polylactic Acid-Polyglycolic Acid Copolymer , Rats , Rats, Sprague-DawleyABSTRACT
In this study a matrix of poly(propylene fumarate) (PPF) was crosslinked with N-vinylpyrrolidone (NVP), 2-hydroxyethylmethacrylate (HEMA), or a mixture of NVP and ethyleneglycol dimethacrylate (EGDMA) in the presence of poly(lactide-co-glycolide) (PLGA) to reinforce and preserve the form of PLGA bone plates. The degree of crosslinkage varied depending on the crosslinker as shown by the rapid and almost complete leaching of NVP upon incubation in phosphate buffered saline at 37 degrees C in 900 h and retention of 92% of HEMA. With the reinforced bone plates extracted for 72 h at room temperature methylene chloride, the extracted PLGA from NVP/PPF, NVP-EGDMA/PPF, and HEMA/PPF were 75.42% (w/w), 59.52% (w/w), and 30.86% (w/w), respectively. The flexural modulus and compressive strength of the crosslinked PPF reinforced bone plates were higher than that of the unreinforced bone plate. Atomic force microscopy showed that NVP/PPF reinforced PLGA bone plates eroded substantially (a mean surface roughness of 19.319 nm) whereas NVP-EGDMA-PPF reinforced bone plate showed a distinct crystalline organization (and a higher roughness, 43.525 nm). In conclusion, we propose the consideration of NVP-EGDMA/PPF reinforced PLGA as a biodegradable orthopedic implant material that has a lower likelihood of warping or failing catastrophically than the currently available materials.
ABSTRACT
Techniques of liver replacement would benefit patients awaiting donor livers and may be a substitute for transplantation in patients whose livers can regenerate. Poly(lactic-co-glycolic acid) (PLGA) copolymers are biodegradable and have been shown to be useful as scaffolds for seeding and culturing various types of cells. In this study, foam disks were prepared from PLGA (lactic-to-glycolic mole ratio of 85:15) by lyophilization of benzene (5% w/v) solutions. These disks were then used as scaffolds for rat hepatocyte culture. Foams were coated with either a type I collagen gel (0.1% w/v), coated with gelatin (5% w/v), or treated with oxygen plasma (25 W, 90 s) to modify their surface chemistry and wettability. The disks were then seeded with rat hepatocytes (10(6)/mL) and cultured for a period of 2 weeks. All surface treatments resulted in increased hydrophilicity, the greatest being obtained by collagen treatment (contact angle < 10 degrees ), and a minimal decrease in void fraction (5%). DNA content after a 2-week culture period increased proportionally with the wettability of the treated foam surface. Urea synthesis in untreated foams averaged 15.3 +/- 2.3 microg/h/microg DNA, which was significantly higher than that for controls, whereas gelatin and collagen treated foams exhibited urea synthetic rates below the control levels at all times. The DNA content decreased significantly by about 50% between days 1 and 12. PLGA foams, treated and untreated, represent a promising scaffold for scaling up hepatocyte cultures.
Subject(s)
Biocompatible Materials , Lactic Acid , Liver/physiology , Polyglycolic Acid , Polymers , Tissue Engineering , Animals , Bioprosthesis , Cell Adhesion/physiology , Cells, Cultured , Liver/cytology , Liver Transplantation , Male , Polylactic Acid-Polyglycolic Acid Copolymer , Rats , Rats, Inbred F344ABSTRACT
Synthetic peptide vaccines which are derived from functional domains of Streptococcus mutans glucosyltransferases (GTF) have been shown to induce protective immunity in Sprague-Dawley rats after subcutaneous injection in the salivary gland region. Since mucosal induction of salivary immunity would be preferable in humans, we explored methods to induce mucosal antibody in the rat to the GTF peptide vaccines HDS and HDS-GLU after intranasal administration. Several methods of facilitation of the immune response were studied: the incorporation of peptides in bioadhesive poly(D,L-lactide-coglycolide) (PLGA) microparticles, the use of monoepitopic (HDS) or diepitopic (HDS-GLU) peptide constructs, or the use of mucosal adjuvants. Salivary immunoglobulin A (IgA) responses were not detected after intranasal administration of diepitopic HDS-GLU peptide constructs in alum or after incorporation into PLGA microparticles. However, significant primary and secondary salivary IgA and serum IgG antibody responses to HDS were induced in all rats when cholera holotoxin (CT) or a detoxified mutant Escherichia coli heat-labile enterotoxin (R192G LT) were intranasally administered with HDS peptide constructs in PLGA. Coadministration of LT with HDS resulted in predominantly IgG2a responses in the serum, while coadministration with CT resulted in significant IgG1 and IgG2a responses to HDS. Serum IgG antibody, which was induced to the HDS peptide construct by coadministration with these adjuvants, also bound intact mutans streptococcal GTF in an enzyme-linked immunosorbent assay and inhibited its enzymatic activity. Thus, immune responses which are potentially protective for dental caries can be induced to peptide-based GTF vaccines after mucosal administration if combined with the CT or LT R192G mucosal adjuvant.
Subject(s)
Adjuvants, Immunologic , Bacterial Toxins/immunology , Cholera Toxin/immunology , Enterotoxins/immunology , Escherichia coli Proteins , Glucosyltransferases/immunology , Peptides/immunology , Streptococcal Vaccines/immunology , Streptococcus mutans/enzymology , Vaccines, Synthetic/immunology , Administration, Intranasal , Amino Acid Sequence , Animals , Epitopes, B-Lymphocyte/immunology , Female , Immunity, Mucosal/immunology , Immunization, Secondary , Immunoglobulin A/metabolism , Male , Molecular Sequence Data , Rats , Rats, Sprague-Dawley , Saliva/immunology , Streptococcus mutans/immunologyABSTRACT
Biodegradable materials have various important applications in the biomedical field. There are basically two groups of polyesters which have significant importance in this field. These are polylactides and polyhydroxybutyrates. Both groups degrade via hydrolysis with the rates of degradation depending on medium properties such as pH, temperature, solvent and presence of biocatalysts, as well as on chemical compositions. In order for these biomaterials to be suitable for use in load bearing applications without deformation or warping their strengths and their capability to maintain their form must be improved. To insure dimensional stability during degradation and to match modulus and strength to that of bone, introduction of a reinforcing structure for those applications to plate fixation through the creation of an interpenetrating network might be a feasible approach. In this study, poly(lactide-co-glycolide) (PLGA), was the major structural element to be strengthened by a three-dimensional network or "scaffold" of another biodegradable polymer, poly(propylene fumarate) (PPF). PPF would be crosslinked with a biocompatible vinyl monomer, vinylpyrrolidone (VP). Three different approaches were tested to create dimensionally stable bone plates. First, via in situ crosslinking of PPF in the presence of PLGA. Secondly, by blending of precrosslinked PPF with PLGA. Finally, by simultaneous crosslinking and molding of the PLGA, PPF and VP. These were compared against extruded or compression molded PLGA controls. Results showed that compression molding at room temperature followed by crosslinking under pressure at elevated temperature and subsequently by gamma-irradiation appeared to yield the most favorable product as judged by swelling, hardness and flexural strength data. The composition of the implant material, PLGA(3):PPF(1):VP(0.7), appeared to be suitable and formed the compositional and procedural basis for in vivo biocompatibility studies.
Subject(s)
Absorbable Implants , Fumarates , Lactic Acid , Polyglycolic Acid , Polymers , Polypropylenes , Pyrrolidinones , Absorption , Animals , Biocompatible Materials , Biodegradation, Environmental , Biopolymers , Bone Plates , Hardness Tests , Male , Polylactic Acid-Polyglycolic Acid Copolymer , Rats , Rats, Sprague-DawleyABSTRACT
Biodegradable bone plates were prepared as semi-interpenetrating networks (SIPN) of crosslinked polypropylene fumarate (PPF) within a host matrix of either poly(lactide-co-glycolide)-85:15 (PLGA) or poly(1-lactide-co-d,l-lactide)-70:30 (PLA) using N-vinylpyrrolidone (NVP), ethylene glycol dimethacrylate (EGDMA), 2-hydroxyethyl methacrylate (HEMA), and methyl methacrylate (MMA) as crosslinking agents. Hydroxyapatite (HAP), an inorganic filler material, was used to further augment mechanical strength. The control crosslinking agent (NVP) was replaced partially and totally with other crosslinking agents. The amount of crosslinking agent lost, the characterization change in the mechanical properties and the dimensional stability of the bone plates after in vitro treatment was calculated. The optimum crosslinking agent was selected on the basis of low in vitro release of NVP from SIPN matrix. Bone plates were then prepared using this crosslinking agent at 5 MPa pressure and at temperatures between 100-140 degrees C to determine if there was any augmentation of mechanical properties in the presence of the crosslinked network. In vitro analysis showed that 90% of the crosslinking agent was lost on plates using NVP as a crosslinking agent. This loss was reduced to 50% when NVP was partially replaced with EGDMA or MMA. EGDMA was determined to be superior because (1) its low release as a crosslinking agent, (2) flexural plate strength of 50-67 MPa, (3) flexural modulus of 7-13 GPa, and (4) manufacturability stiffness of 300-600 N/m. HAP-loading resulted in an additional increase in values of mechanical parameters. Substituting PLGA with PLA in the PPF-SIPN did not show any additional improvement of mechanical properties.
Subject(s)
Absorbable Implants , Biocompatible Materials/chemistry , Bone Plates , Cross-Linking Reagents/chemistry , Durapatite/chemistry , Elasticity , Equipment Design , Fumarates/chemistry , Hot Temperature , Humans , Lactic Acid/chemistry , Methacrylates/chemistry , Methylmethacrylate/chemistry , Pliability , Polyesters/chemistry , Polyglycolic Acid/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers/chemistry , Polypropylenes/chemistry , Pressure , Pyrrolidinones/chemistry , Stress, MechanicalABSTRACT
Clinical outcomes of bone allograft procedures may be improved by modifying the surface of the graft with an osteoconductive biopolymeric coating. In this comparative in vitro study, we evaluated the dimensional stability, mechanical strength, hydrophilicity, and water uptake of biodegradable foams of poly(propylene fumarate) (PPF) and poly(d,l-lactic-co glycolic acid) (PLGA) when applied as surface coatings to cortical bone. Cortical bone samples were divided into four groups: Type I, untreated bone; Type II, laser-perforated bone; Type III, partially demineralized bone; and Type IV, laser-perforated and partially demineralized bone. Results show that PPF wets easily, achieving 12.5% wt/wt in 30 min. Compressive tests on the PPF foam material showed that the compressive strength was 6.8 MPa prior to in vitro incubation but then gradually reduced to 1.9 MPa at 8 weeks. Push-out and pulloff strength tests showed that initially both PPF and PLGA foam coatings had comparable adherence strengths to the cortical bone samples (100-150 N). When additional geometrical surface alteration by perforation and demineralization of the bony substrate was employed, in vitro adherence of the PPF foam coating was further increased to 120 N, demonstrating a statistically significant improvement of push-out strength throughout the entire 8-week observation period (p<0.0002 for all four data points). The pore geometry of PPF-foam coatings changed little over the 2-month evaluation period. In comparison, PLGA foam coating around the cortical bone samples rapidly lost structure with a decrease of 67% in strength seen after 1-week in vitro incubation. These new types of bone allografts may be particularly useful where the use of other replacement materials is not feasible or practical.
Subject(s)
Bone Remodeling , Bone Substitutes , Bone Transplantation , Fumarates , Lactic Acid , Polyglycolic Acid , Polymers , Polypropylenes , Tibia , Polylactic Acid-Polyglycolic Acid Copolymer , Transplantation, HomologousABSTRACT
Plates for internal fixation fabricated from biodegradable polymers degrade via an autocatalytic route. When they are used in bone implants of significant size and thickness, hollowing of the implant may occur while the overall dimensions appear unchanged. We hypothesized that incorporation of a cross-linked polypropylene fumarate matrix into polylactide-co-glycolide bone plates may provide an internal molecular network which prevents implant collapse. Cross-linking reagents of varying hydrophilicity including N-vinylpyrrolidone (VP), hydroxyethylmethacrylate (HEMA), and ethyleneglycol dimethacrylate (EGDMA) were employed. With the objective of determining the most biocompatible and structurally sound composition for molecular reinforcement, we investigated tissue responses in both subcutaneous and orthotopic rodent implantation models in relation to maintenance of implant integrity by histologic, histomorphometric, and stereomicroscopic analysis. Results showed that tissue responses were correlated with dimensional stability of the implants. The most favorable results were seen with the hydrophobic cross-linker EGDMA; this may have been related to the initial reduction of the water uptake by the implant. Cross-linking of polypropylene fumarate with EGDMA within a polylactide-co-glycolide bone plate may offer a means to maintain excellent biocompatibility while improving dimensional stability of biodegradable bone plates.
Subject(s)
Biocompatible Materials/chemistry , Prostheses and Implants , Animals , Biocompatible Materials/pharmacology , Bone and Bones/chemistry , Bone and Bones/metabolism , Cross-Linking Reagents/pharmacology , Lactic Acid/chemistry , Male , Methacrylates/chemistry , Polyglycolic Acid/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers/chemistry , Pyrrolidinones/pharmacology , Rats , Rats, Long-Evans , Tibia/chemistryABSTRACT
Bioresorbable bone graft substitutes may significantly reduce the disadvantages associated with autografts, allografts and other synthetic materials currently used in bone graft procedures. We investigated the biocompatibility and osteointegration of a bioresorbable bone graft substitute made from the unsaturated polyester poly(propylene-glycol-co-fumaric acid), or simply poly(propylene fumarate), PPF, which is crosslinked in the presence of soluble and insoluble calcium filler salts. Four sets of animals each having three groups of 8 were evaluated by grouting bone graft substitutes of varying compositions into 3-mm holes that were made into the anteromedial tibial metaphysis of rats. Four different formulations varying as to the type of soluble salt filler employed were used: set 1--calcium acetate, set 2--calcium gluconate, set 3--calcium propionate, and set 4--control with hydroxapatite, HA, only. Animals of each of the three sets were sacrificed in groups of 8 at postoperative week 1, 3, and 7. Histologic analysis revealed that in vivo biocompatibility and osteointegration of bone graft substitutes was optimal when calcium acetate was employed as a soluble salt filler. Other formulations demonstrated implant surface erosion and disintegration which was ultimately accompanied by an inflammatory response. This study suggested that PPF-based bone graft substitutes can be designed to provide an osteoconductive pathway by which bone will grow in faster because of its capacity to develop controlled porosities in vivo. Immediate applicability of this bone graft substitute, the porosity of which can be tailored for the reconstruction of defects of varying size and quality of the recipient bed, is to defects caused by surgical debridement of infections, previous surgery, tumor removal, trauma, implant revisions and joint fusion. Clinical implications of the relation between developing porosity, resulting osteoconduction, and bone repair in vivo are discussed.
Subject(s)
Bone Substitutes , Osseointegration , Polymers , Propylene Glycols , Animals , Bone Cements , Fumarates , Male , Materials Testing , Polypropylenes , Rats , Rats, Sprague-DawleyABSTRACT
We have investigated an injectable form of a resorbable bone cement based on in situ crosslinking of the unsaturated polyester, poly(propylene glycol-co-fumaric acid) (PPF). This material, filled with calcium gluconate/hydroxyapatite (CG/HA), cures to a hard cement degradable by hydrolysis. The purpose of this study was to evaluate the osteoconductive properties of this injectable cement. The cement was used as an adjunct to fixation with an intramedullary rod in the rat femoral osteotomy model. Ingrowth of new bone into the cement was examined in vivo. Negative and positive controls with rigid and loose internal fixation were included for comparison. Animals were evaluated histologically and histomorphometrically at 4 weeks postoperatively. Results of this study showed osteoblastic activity and new bone formation at the interface between the femoral bone and the cement in the experimental group. However, there was little bone remodeling at the endosteal surface in positive and negative controls. Histologic evaluation of the cement revealed the formation of cavitations, which likely resulted from leaching of the highly soluble calcium gluconate portion of the filler from the cement. These cavitations were sites of ingrowth of vascular and bony tissues. Intimate contact between the bone cement and the endosteal surface of the cortex was found. Quantitative histomorphometric analysis corroborated these observations. Findings of this study demonstrated the osteoconductivity of this type of injectable PPF-based bone cement.
Subject(s)
Bone Cements , Bone Remodeling , Fumarates , Polypropylenes , Animals , Male , Rats , Rats, Sprague-DawleyABSTRACT
The effect of mucosal delivery of Streptococcus sobrinus glucosyltransferase (GTF) in bioadhesive poly (D,L-lactide-co-glycolide) (PLGA) microparticles on induction of salivary IgA and serum IgG antibody responses was measured in Sprague-Dawley rats. Preparations of GTF/PLGA/gelatin microparticles, or PLGA/gelatin microparticles or GTF in alum, were administered four times at weekly intervals by intranasal or intragastric routes. Two subcutaneous injections of GTF in PLGA/gelatin microparticles or in alum were given to separate groups of rats. Significant elevations in salivary IgA antibody levels to S. sobrinus GTF were observed only in the groups immunized intranasally 28 days after immunizations were begun. Five of six rats given the GTF microparticles intranasally had positive salivary IgA antibody responses to GTF, and the mean salivary IgA antibody level of this group was 30-fold higher than any other mucosally or systemically immunized group. Salivary IgA responses in the GTF-microparticle group remained significantly higher than all other mucosally immunized groups for at least 10 weeks after the primary immunization. All rats in this group demonstrated aspects of anamnesis following a more limited secondary course of intranasal administration. Intranasal administration of GTF in microparticles also induced a serum IgG response to GTF in some rats. After secondary intranasal GTF microparticle administration, several rats had sustained serum IgG antibody levels that were within the range of sera from rats subcutaneously injected with GTF in microparticles or in alum. Thus intranasal delivery of GTF-containing bioadhesive microparticles induced the highest and longest lasting salivary immune response of any mucosal or systemic route or vehicle tested and could be expected to be a useful method for induction of mucosal immunity.
Subject(s)
Antibodies, Bacterial/analysis , Glucosyltransferases/immunology , Lactic Acid/immunology , Saliva/immunology , Streptococcus sobrinus/immunology , Administration, Intranasal , Alum Compounds , Animals , Antibodies, Bacterial/blood , Gelatin/immunology , Glucosyltransferases/administration & dosage , Immunity, Mucosal , Immunization, Secondary , Immunoglobulin A/analysis , Immunoglobulin G/blood , Polyglycolic Acid , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers , Rats , Rats, Sprague-Dawley , Time Factors , VaccinationABSTRACT
Bioresorbable bone graft substitutes could eliminate disadvantages associated with the use of autografts, allografts and other synthetic materials. We investigated a bioresorbable bone graft substitute made from the unsaturated polyester poly(propylene fumarate) which is crosslinked in the presence of soluble and insoluble calcium filler salts. This compact bone graft substitute material develops porosity in vivo by leaching of the soluble filler salts. In attempt to develop materials whose in vivo porosity can be designed such that implant degradation would occur at a rate that remains supportive of the overall structural integrity of the repairing defect site, we studied the early tissue response upon implantation in a bony defect. Three grout formulations of varying solubilities using slightly soluble hydroxyapatite (HA) and soluble calcium acetate (CA) were evaluated in 3 mm holes made in the anteromedial tibial metaphysis of 200 g Sprague Dawley rats (n = 16 per formulation for a total of 48 animals). Grout formulations cured in situ. Animals from each formulation were sacrificed in groups of 8 at 4 days and 3 weeks postoperatively. Histologic analysis of the healing process revealed improved in vivo osteointegration of bone graft substitutes when a higher loading of calcium acetate was employed. All formulations maintained implant integrity and did not provoke sustained inflammatory responses. This study suggested that the presence of a soluble salt permits in vivo development of porosity of a poly(propylene fumarate) based bone graft substitute material.
Subject(s)
Bone Transplantation/methods , Bone and Bones/physiology , Polymers/pharmacology , Propylene Glycols/pharmacology , Acetates/chemistry , Acetates/pharmacology , Animals , Bone Development/physiology , Bone and Bones/chemistry , Calcium/chemistry , Calcium Compounds , Durapatite/chemistry , Kinetics , Male , Prostheses and Implants , Rats , Rats, Sprague-Dawley , Tibia/chemistry , Tibia/pathology , Time FactorsABSTRACT
Regeneration of skeletal tissues has been recognized as a new means for reconstruction of skeletal defects. We investigated the feasibility of an injectable and expandable porous implant system for in situ regeneration of bone. Therefore, a composite biodegradable foaming cement based on poly(propylene fumarate) was injected into a critical size defect made in the rat tibia. Animals were divided into two groups comparing the foam in the experimental group against sham-operated animals having a drill hole but no implant in the control group. Eight animals were included in each group. Animals were sacrificed at 1, 3, and 7 weeks postoperatively. Implantation sites were then evaluated with histologic and histomorphometric methods. Results of this study showed that defects did not heal in sham-operated animals. In the experimental group, metaphyseal and cortical defects healed within the first postoperative week by formation of immature woven bone. At the site of the cortical drill hole defect, healing was noted to progress to complete closure by formation of mature bone. Histomorphometry corroborated these findings and showed that metaphyseal bone remodeling peaked at 1 week postoperatively and then decreased as healing of the cortical defect progressed. This suggests that near-complete restoration of the original state of the tibial bone occurred in this animal model supporting the concept of in situ bone regeneration by application of engineered biodegradable porous scaffolds. () ()
Subject(s)
Bone Cements , Fumarates , Polypropylenes , Tibia/injuries , Wound Healing , Animals , Biodegradation, Environmental , Bone Cements/pharmacokinetics , Fumarates/chemistry , Fumarates/pharmacokinetics , Male , Microscopy, Electron, Scanning , Polypropylenes/chemistry , Polypropylenes/pharmacokinetics , Rats , Rats, Sprague-Dawley , Tibia/surgeryABSTRACT
OBJECTIVE: To establish the chemotherapeutic value of a depot drug preparation of isoniazid and pyrazinamide against experimental tuberculosis. DESIGN: To see whether sustained levels of pyrazinamide are available for prolonged periods after a single subcutaneous administration of a biodegradable polylactic-glycolic acid (PLGA) polymer containing the drug, studies were done to ascertain whether a single administration of isoniazid and pyrazinamide in separate PLGA polymers could offer chemotherapeutic protection against a heavy intravenous challenge of susceptible mice with a virulent strain of Mycobacterium tuberculosis similar to that rendered by daily administration of the two drugs for 8 weeks. RESULTS: Even with three times the daily dose of pyrazinamide contained in the single PLGA polymer implant, no abnormally high (burst) levels of the drug were evident after administration, but sustained levels of the drug were seen up to 54 days. The chemotherapeutic activity of the single PLGA polymer implants was similar to that obtained with standard oral treatment with the two drugs given daily for the entire 8 weeks, as judged by mortality and colony forming unit (CFU) counts of tubercle bacilli from lungs and spleen. CONCLUSION: Treatment with single implants of the PLGA polymer containing anti-mycobacterial drugs offers a strong possibility of circumventing the compliance problem.
Subject(s)
Antitubercular Agents/administration & dosage , Isoniazid/administration & dosage , Pyrazinamide/administration & dosage , Tuberculosis/drug therapy , Administration, Oral , Analysis of Variance , Animals , Antitubercular Agents/pharmacokinetics , Biocompatible Materials/administration & dosage , Biological Availability , Delayed-Action Preparations/administration & dosage , Disease Models, Animal , Drug Administration Schedule , Drug Implants , Isoniazid/pharmacokinetics , Lactic Acid/administration & dosage , Male , Mice , Mice, Inbred C57BL , Polyglycolic Acid/administration & dosage , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers/administration & dosage , Pyrazinamide/pharmacokinetics , Sensitivity and SpecificityABSTRACT
For the treatment of periodontal diseases, design of a controlled release system seemed very appropriate for an effective, long term result. In this study a novel, biodegradable microbial polyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV of various valerate contents containing a well established antibiotic, tetracycline, known to be effective against many of the periodontal disease related microorganisms, was used in the construction of a controlled release system. Tetracycline was loaded in the PHBV microspheres and microcapsules both in its acidic (TC) and in neutral form (TCN). Microcapsules of PHBV were prepared under different conditions using w/o/w double emulsion and their properties such as encapsulation efficiency, loading, release characteristics, and morphological properties were investigated. It was found that concentration of emulsifiers polyvinyl alcohol (PVA) and gelatin (varied between 0-4%) influenced the encapsulation efficiency appreciably. In order to increase encapsulation efficiency (from the obtained range of 18.1-30.1%) and slow down the release of the highly soluble tetracycline.HCl, it was neutralized with NaOH. Encapsulation efficiency of neutralized tetracycline was much higher (51.9-65.3%) due to the insoluble form of the drug used during encapsulation. The release behaviour of neither of the drugs was found to be of zero order. Rather the trends fitted reasonably well to Higuchi's approach for release from spherical micropheres. Biodegradability was not an appreciable parameter in the release from microcapsules because release was complete before any signs of degradation were observed.
Subject(s)
Bacteria/chemistry , Delayed-Action Preparations/pharmacokinetics , Polyesters/chemistry , Tetracycline/pharmacokinetics , Biodegradation, Environmental , Capsules , Gelatin/chemistry , Hydrogen-Ion Concentration , Microscopy, Electron, Scanning , Microspheres , Particle Size , Polyvinyl Alcohol/chemistryABSTRACT
Alteration of the geometrical surface configuration of cortical bone allografts may improve incorporation into host bone. A porous biodegradable coating that would maintain immediate structural recovery and subsequently allow normal graft healing and remodeling by promoting bony ingrowth could provide an osteoconductive surface scaffold. We investigated the feasibility of augmenting cortical bone grafts with osteoconductive biodegradable polymeric scaffold coatings. Three types of bone grafts were prepared: Type I--cortical bone without coating (control), Type II--cortical bone coated with PLGA-foam, Type III--cortical bone coated with PPF-foam. The grafts were implanted into the rat tibial metaphysis (16 animals for each type of bone graft). Post-operatively the animals were sacrificed at 2 weeks and 4 weeks (8 animals for each type of bone graft at each time point). Histologic and histomorphometric analysis of grafts showed that the amount of new bone forming around the foam-coated grafts was significantly higher than in the control group (uncoated; p < 0.02). Although both foam formulations were initially equally osteoconductive, PLGA-based foam coatings appeared to have degraded at two weeks postoperatively, whereas PPF-based foam coatings were still present at 4 weeks postoperatively. While significant resorption was present in control allografts with little accompanying reactive new bone formation, PLGA-coated bone grafts showed evidence of bone resorption and subsequent bony ingrowth earlier than those coated with PPF-based foams suggesting that PPF-coated cortical bone grafts were longer protected against host reactions resulting in bone resorption.
Subject(s)
Absorbable Implants , Bone Transplantation/physiology , Coated Materials, Biocompatible/chemistry , Osteogenesis/physiology , Polymers/chemistry , Animals , Bone Cements/chemistry , Bone Regeneration/physiology , Bone Remodeling , Bone Resorption/pathology , Bone Transplantation/pathology , Bone and Bones/anatomy & histology , Decalcification Technique , Feasibility Studies , Follow-Up Studies , Fumarates/chemistry , Graft Survival , Humans , Lactic Acid/chemistry , Male , Polyglycolic Acid/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer , Polypropylenes/chemistry , Porosity , Protective Agents/chemistry , Rats , Rats, Sprague-Dawley , Surface Properties , Tibia/surgery , Tissue Preservation , Transplantation, HeterologousABSTRACT
We investigated the feasibility of enhancing the regeneration of skeletal tissues by augmenting bone grafts with a composite biodegradable bone graft extender material based on the polymer poly(propylene fumarate), PPF. The material was mixed with autograft and allograft and placed directly into a cylindrical metaphyseal defect made in the rat tibia. These formulations were compared to defects without any graft material, autografts, allografts and PPF alone. Nine animals were included in each group. Animals were sacrificed at 1 and 4 weeks postoperatively. Implantation sites were then evaluated using histologic and histomorphometric methods. Results of this study showed that defects did not heal in sham operated animals. In the experimental groups, there was early new woven bone formation in the autograft group with near complete healing of the defect at four weeks. When PPF was used alone, gradual ingrowth of new bone was seen. Mixing of the PPF bone graft extender with either allograft or autograft material resulted in enhancement of new bone formation with both allo- and autograft. However, significantly more new bone formation than in the autograft group was only seen when the PPF bone graft extender was mixed with fresh autograft. Histomorphometry corroborated these findings. Results of this study suggest that a PPF-based material may be used to increase the volume of smaller amounts of bone grafts supporting the concept of "bone graft extenders" by application of engineered biodegradable porous scaffolds.