Broström ankle ligament repair augmented with suture tape : Results of magnetic resonance imaging evaluation.

BACKGROUND: The Broström procedure is an established procedure in cases of primary lateral ankle ligament repair (LALR). To improve postoperative stability an augmentation device, InternalBrace™ (Arthrex, Naples, FL) has been introduced. This study evaluates remodelling of the anterior talofibular ligament (ATFL) in patients undergoing a tape augmented Broström technique as well as clinical outcomes. METHODS: In this study 32 patients with chronic lateral ankle instability (CLAI) receiving augmented LALR were included. Clinical outcomes were evaluated at a one-time postoperative visit between 12 and 18 months. A 3 T magnetic resonance imaging (MRI) was done to evaluate the morphology of the ATFL. Statistical analysis was completed with the free software and environment R version 3.6.3 (Bell Laboratories, Murray Hill, NJ, USA) and P-values < 0.05 were considered statistically significant. RESULTS: The mean follow-up time was 15.3 ± 1.8 months with a return to sport time of 4.0 ± 2.4 months. The average AOFAS (American Orthopaedic Foot and Ankle Society Score) score was 94.4 ± 7.2, the FAOS (Foot and Ankle Outcome Score) demonstrated 87.3 ± 10.4 points and the FFI (Foot Function Index - 2 scores (pain and function score)) was 22.9 ± 20.1 and 15.4 ± 10.4, respectively. The MRI findings demonstrated an average length of the ATFL of 18.6 ± 4.3 mm and the width was 3.6 ± 0.9 mm. A clear differentiation between the ATFL and the augmentation device could be shown in 28 cases. The Fisher's exact test could not depict a significant correlation between the presence of a bone marrow edema and the tension of the augmentation device with a level of significance of α = 0.05. CONCLUSION: An anatomical healing tendency of the ligament repair and good integrity of the augmentation device could be shown based on MRI findings. The lateral ligament repair augmented with suture tape is an effective and safe procedure regarding surgical treatment in chronic lateral ankle instability producing good clinical outcome.

Comparison of revision rates and epidemiological data of a single total knee arthroplasty system of different designs (cruciate retaining, posterior stabilized, mobile bearing, and fixed bearing): a meta-analysis and systematic review of clinical trials and national arthroplasty registries.

BACKGROUND: This study aimed to meta-analyze epidemiological data, revision rates, and incidences of different designs of a single Total Knee Arthroplasty System and compare these factors across different countries. METHODS: A systematic review was conducted on clinical studies and arthroplasty registries of ATTUNE TKA from 1999 to 2020. The main endpoints analyzed were revision rates and epidemiological data. RESULTS: The average age of patients was 67.8 years, with a gender distribution of 60% female and 40% male. The pooled average BMI was 29.4 kg/m2. Eight clinical studies showed a pooled revision rate per 100 observed CY of 0.5 (n = 1343 cases). Cumulative revision rates after 1, 3, and 5 years varied among registries, with the Swiss registry having the highest revision data (after 5 years: 6.3%) and the American registry having the lowest revision data (after 5 years: 1.7%). A comparison of the revision rates of mobile bearing and fixed bearing (41,200 cases) as well as cruciate retaining and posterior stabilized (n = 123,361 cases) showed no significant advantage in the first 5 years after implantation. CONCLUSION: In conclusion, pooled data from 41,200 cases of TKA with a single Total Knee Arthroplasty System in two arthroplasty registries revealed that there was no significant difference in revision rates between the mobile bearing and fixed bearing design within the first 5 years after implantation. In addition, a comparison of the revision rates in n = 123,361 cases showed no significant advantage for cruciate retaining or posterior stabilized in the first 5 years after implantation.

Enhancing Precision and Efficiency in Knee Arthroplasty: A Comparative Analysis of Computer-Assisted Measurements with a Novel Software Tool versus Manual Measurements for Lower Leg Geometry.

(1) Background: The aim of this prospective study was to evaluate measurement software in comparison with manual measurements using inter-observer and intra-observer variability on radiographs in the preoperative planning of total knee arthroplasty. (2) Methods: Two independent observers retrospectively measured the mechanical lateral proximal femoral angle (mLPFA), the mechanical lateral distal femoral angle (mLDFA), the joint line convergence angle (JLCA), the mechanical medial proximal tibial angle (mMPTA), the mechanical lateral distal tibial angle (mLDTA), the hip-knee angle or mechanical tibial-femoral axis angle (HKA), and the anatomical-mechanical angle (AMA) on 55 long-leg anteroposterior radiographs manually twice, followed by measurements using dedicated software. Variability between manual and computer-aided planning was assessed, and all measurements were performed a second time after 14 days in order to assess intra-observer variability. (3) Results: Concerning intra-observer variability, no statistically significant difference was observed regarding the software-based measurements. However, significant differences were noted concerning intra-observer variability when measuring the mLDFA and AMA manually. Testing for statistical significance regarding variability between manual and software-based measurements showed that the values varied strongly between manual and computer-aided measurements. Statistically significant differences were detected for mLPFA, mLDFA, mMPTA, and mLPTA on day 1, and mLPFA, mMPTA, and mLPTA on day 15, respectively. (4) Conclusions: Preoperative planning of leg axis angles and alignment using planning software showed less inter- and intra-observer variability in contrast to manual measurements, and results differed with respect to manual planning. We believe that the planning software is more reliable and faster, and we would recommend its use in clinical settings.

Evaluation of Neuropathic Pain after Total Knee Arthroplasty: Do Yellow Flags Matter?

Up to 20% of total knee arthroplasty (TKA) patients continue to experience chronic postsurgical pain. Various factors have been identified as potential contributors, including so-called "yellow flags", encompassing symptoms of depression, anxiety, and catastrophizing, which were examined in this study to assess their predictive value concerning functional outcomes after TKA. METHODS: Fifty TKA patients were categorized into high-risk and low-risk groups based on clinical assessment, demographic data, medication, and patient-reported outcome measures (DN4, SF-36, WOMAC, NRS, Fibromyalgia Survey Questionnaire, Pain Catastrophizing Scale, and Hospital Anxiety and Depression Scale). Postoperative outcomes within six months after TKA were then compared. RESULTS: Both groups exhibited significant (p < 0.001) improvements in all WOMAC and NRS subscales, as well as in the physical function, role physical, pain, and energy/fatigue subdomains of the SF-36 after six months, while the high-risk group showed lower WOMAC scores regarding stiffness (19.0 ± 18.3 vs. 27.2 ± 20.7, p < 0.001) and pain (13.5 ± 13.3 vs. 15.1 ± 16.3, p = 0.029). The high-risk group showed significantly worse preoperative DN4 scores (1.8 ± 1.3 vs. 3.0 ± 1.1, p = 0.002) than the low-risk group, which persisted for one day (2.3 ± 1.2 vs. 3.5 ± 1.5, p = 0.005) and six weeks (2.2 ± 1.9 vs. 3.6 ± 2.3, p = 0.041) postoperatively. CONCLUSIONS: Our results indicate that pre-existing yellow flags contribute to a more challenging early postoperative phase, underscoring the importance of considering individual patient characteristics and psychological factors to optimize TKA outcomes.

High-Throughput Phenotypic Screening and Machine Learning Methods Enabled the Selection of Broad-Spectrum Low-Toxicity Antitrypanosomatidic Agents.

Broad-spectrum anti-infective chemotherapy agents with activity against Trypanosomes, Leishmania, and Mycobacterium tuberculosis species were identified from a high-throughput phenotypic screening program of the 456 compounds belonging to the Ty-Box, an in-house industry database. Compound characterization using machine learning approaches enabled the identification and synthesis of 44 compounds with broad-spectrum antiparasitic activity and minimal toxicity against Trypanosoma brucei, Leishmania Infantum, and Trypanosoma cruzi. In vitro studies confirmed the predictive models identified in compound 40 which emerged as a new lead, featured by an innovative N-(5-pyrimidinyl)benzenesulfonamide scaffold and promising low micromolar activity against two parasites and low toxicity. Given the volume and complexity of data generated by the diverse high-throughput screening assays performed on the compounds of the Ty-Box library, the chemoinformatic and machine learning tools enabled the selection of compounds eligible for further evaluation of their biological and toxicological activities and aided in the decision-making process toward the design and optimization of the identified lead.

Artificial Bone Graft Substitutes for Curettage of Benign and Low-Grade Malignant Bone Tumors: Clinical and Radiological Experience with Cerasorb.

Background: Artificial bone graft substitutes (ABGS) for curettage of bone tumors are becoming increasingly popular. The aim of this retrospective analysis was to determine the efficacy of the ABGS Cerasorb (Curasan-AG, Kleinostheim, Germany), a beta-tricalcium phosphate (beta-TCP), concerning resorption profile, bone healing, and remodeling after surgery and to evaluate potential complications. Methods: Forty-three patients suffering from benign and low-grade malignant bone tumors were treated with curettage and refilling of the bony cavity using the ABGS Cerasorb between 2018 and 2021 and included in the final analysis. Clinical follow-up exams with X-rays in two planes were performed 6 weeks, 3 months, 6 months, and 1 year after surgery. Results: After a mean follow-up period of 14.6 months, radiological consolidation following curettage was observed in all patients. Total resorption was observed in 16.3% of patients; in the other 83.7%, resorption was partial. In four patients, of whom two had a tumor in the distal femur and two in the humeral diaphysis, fractures occurred within 6 weeks after primary surgery. Conclusion: In conclusion, the beta-TCP Cerasorb seems to be a reliable bone graft substitute with low complication rates and is a suitable alternative to autologous bone grafts or allografts. Nonetheless, it shows a tendency of delayed resorption. Level of Evidence: III; retrospective cohort study.

Does surgical reconstruction of the distal oblique bundle (DOB) provide similar stability as the intact bundle or Adams procedure? A systematic review.

INTRODUCTION: The aim of this review was to summarize the available evidence for biomechanical stability following surgical DOB reconstruction, and to determine whether distal radioulnar joint (DRUJ) stability with a reconstructed DOB was similar to the native intact condition or that after the Adams procedure. MATERIAL AND METHODS: A systematic literature search according to the PRISMA guidelines was performed using the databases PubMed and Embase. The following search algorithm was used: ("DOB" OR "Distal Oblique Bundle") AND "Reconstruction". Biomechanical or human cadaveric studies that measured stability of the DRUJ after reconstruction of the DOB were included. RESULTS: Four articles were included in the final analysis. DOB incidence was reported to be between 50% and 70%. Two studies observed no differences between the intact situation and the reconstructed DOB, respectively the Adams procedure. A further author group found no signs of major instability after the Adams reconstruction or after DOB reconstruction, except for decreased stability during supination in the DOB sample. In another study, similar results could be shown for the Adams and DOB reconstruction groups; however, the DOB sample showed decreased dorsal translation of the radius during forearm supination. CONCLUSION: In conclusion, DOB reconstruction was proven to stabilize the DRUJ adequately. Moreover, the reconstructed DOB showed the same stability as the native DOB, except for one study, in which stability following reconstruction was reduced during supination. No significant difference between the DOB and the Adams reconstruction could be observed.

Improved insights into the SABIO-RK database via visualization.

SABIO-RK is a database for biochemical reactions and their kinetics. Data in SABIO-RK are inherently multidimensional and complex. The complex relationships between the data are often difficult to follow or even not represented when using standard tabular views. With an increasing number of data points the mismatch between tables and insights becomes more obvious, and getting an overview of the data becomes harder. Such complex data benefit from being presented using specially adapted visual tools. Visualization is a natural and user-friendly way to quickly get an overview of the data and to detect clusters and outliers. Here, we describe the implementation of a variety of visualization concepts into a common interface within the SABIO-RK biochemical reaction kinetics database. For that purpose, we use a heat map, parallel coordinates and scatter plots to allow the interactive visual exploration of general entry-based information of biochemical reactions and specific kinetic parameter values. Database URL https://sabiork.h-its.org/.

EnzymeML: seamless data flow and modeling of enzymatic data.

The design of biocatalytic reaction systems is highly complex owing to the dependency of the estimated kinetic parameters on the enzyme, the reaction conditions, and the modeling method. Consequently, reproducibility of enzymatic experiments and reusability of enzymatic data are challenging. We developed the XML-based markup language EnzymeML to enable storage and exchange of enzymatic data such as reaction conditions, the time course of the substrate and the product, kinetic parameters and the kinetic model, thus making enzymatic data findable, accessible, interoperable and reusable (FAIR). The feasibility and usefulness of the EnzymeML toolbox is demonstrated in six scenarios, for which data and metadata of different enzymatic reactions are collected and analyzed. EnzymeML serves as a seamless communication channel between experimental platforms, electronic lab notebooks, tools for modeling of enzyme kinetics, publication platforms and enzymatic reaction databases. EnzymeML is open and transparent, and invites the community to contribute. All documents and codes are freely available at https://enzymeml.org .

Two fingerbreadths, one finger's width: on the proximity of the radial nerve to the deltoid tuberosity.

INTRODUCTION: The aim of this study was to find a convenient technique to evaluate the location of the radial nerve (RN) with reference to the deltoid tuberosity (DT). MATERIALS AND METHODS: Sixty-eight upper extremities, embalmed using a modified version of Thiel's method, were included in the study. The interval between the tip of the greater tubercle of the humerus and the distal tip of the lateral humeral epicondyle (LE) was defined as humeral length (HL). The most prominent point of the DT was used as the point of reference. Through this point, a horizontal reference line which met the humeral axis at the dorsal side of the humeral shaft was simulated. The longitudinal distance between the crossing point of the horizontal line and the humeral axis and the RN was measured (distance 1). The interval between the intersection point and the reference point at the DT was measured (distance 2). Data were evaluated in centimeters. RESULTS: For the whole sample, the HL averaged 31.0 cm (SD: 2.3; range 26.2-36.9). Distance 1 averaged 2.2 cm (SD: 0.3; range 1.6-3.1), and distance 2 averaged 1.2 cm (SD: 1.0; range 0-2.8). The HL was larger in the male group when compared to females (p < 0.001; males mean: 32.2 cm; females mean 29.5 cm). There was no difference regarding distance 2 (p = 0.59; males mean: 1.2 cm; females mean: 1.3 cm) between the sexes. Distance 1 was significantly (p = 0.02) larger in the male group (mean: 2.3 cm) when compared to females (mean: 2.1 cm). Concerning sides, there were no differences regarding all evaluated parameters (HL: p = 0.6; Distance 1: p = 0.6; distance 2: p = 0.8). CONCLUSIONS: This study provides an easily applicable technique to localize the RN with reference to the DT.

Emergency approach to the femoral artery.

PURPOSE: The purpose of this study was to evaluate the applicability and potentially associated harms of emergency access to the femoral artery and vein in a sample of physicians working together in the emergency department of a level I trauma center. In addition, to investigate whether there are differences between participants in terms of different levels of training. METHODS: A sample of 36 orthopedic trauma and anesthesiology assistant doctors, specialists, and senior physician was recruited from the emergency room management at a level I trauma center in Graz, Austria. Emergency approach to the femoral vessels was performed on 33 fresh cadavers. Attention was paid to time, successful clamping of the vessels, self-assessment and learning curve. RESULTS: The approach was performed correctly in 97.2% (35/36) of all cases. 97.2% of all participants (35/36) were confident to perform the emergency access. They were proven right, since especially the resident and senior subgroups achieved satisfactory results concerning the correct performance of the approach to the femoral vessels as well as correct identification of the femoral artery and vein. CONCLUSION: In conclusion, we evaluated the emergency access to the femoral artery (FA) and femoral vein (FV) as an easily teachable procedure including high success rates (correct performance in 97.2%).

Impact of the COVID-19 pandemic on early clinical outcome after total knee arthroplasty: a retrospective comparative analysis.

INTRODUCTION: To help combat the SARS-CoV-2 (COVID-19) pandemic, elective inpatient procedures have been reduced. The authors hypothesized that a nationwide lockdown would negatively affect the postoperative outcome after total knee arthroplasty (TKA) due to reduced physiotherapy as well as restrictions in external facilities of physiotherapy and rehabilitation. MATERIALS AND METHODS: We conducted a retrospective, comparative study including 41 patients who had undergone primary TKA during the first lockdown of the COVID-19 pandemic from March 2020 to April 2020 and a comparable control group consisting of 47 patients with a minimum follow-up of 6 months before the COVID-19 pandemic from 2019. Relevant end points were the visual analogue scale (VAS) for pain, Knee Society Function Score (KSS), Oxford Knee Score (OKS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and range of motion (ROM). RESULTS: The lockdown group had a significantly worse outcome compared to the control group 6 months after TKA regarding WOMAC (p = 0.001), KSS (p < 0.001), OKS (p < 0.001), and length of hospital stay (p < 0.001). We found no statistically significant difference between the groups in ROM (p = 0.132), KSFS (p = 0.933), VAS at rest (p = 0.9.22), and exercise (p = 0.304). CONCLUSION: The COVID-19 pandemic negatively affected early clinical outcome parameters of elective primary TKA at 6 months of follow-up due to restrictions in postoperative care. We believe that standardized protocols for physiotherapy will improve clinical outcomes for TKA in the event of future lockdowns and underline the importance of appropriate postoperative care during this pandemic.

Higher use of fixed-bearing over mobile-bearing and posterior-stabilized over medial pivot designs in total knee arthroplasty (TKA): a systematic comparative analysis using worldwide arthroplasty registers from England and Wales, Australia, Norway, New Zealand, Germany and Switzerland.

INTRODUCTION: The aim of this study was to compare the use of mobile-bearing, fixed-bearing, posterior-stabilized (PS) and medial pivot design to describe epidemiological differences and subsequent outcomes. MATERIALS AND METHODS: A systematic literature search was performed using the NORE website to identify the relevant arthroplasty registers. Inclusion criteria were the following: (1) reports had to be publicly available, (2) reports had to be written in German or English language, (3) differentiation between mobile- and fixed-bearing, posterior-stabilized, and if possible, medial pivot designs had to be possible from the present reports, and (4) data had to be reported for at least three consecutive years and the latest report had to be from the year 2020 to retrieve recent data. RESULTS: Six registries (England and Wales, Australia, Norway, New Zealand, Germany, Switzerland) offered sufficient data according to the inclusion criteria. In all countries, the dominant type of bearing used for total knee arthroplasty (TKA) was fixed-bearing, with percentages ranging from 60.8% to 84.1% in 2018, 63.6% to 85.7% in 2019 and 66.2% to 87.4% in 2020. A large variation was observed concerning mobile-bearing design, which showed a range from 2.8% to 39.2% in 2018, 2.6% to 36.4% in 2019 and 2.9% to 33.8% in 2020. Some variation was found regarding the use of PS TKA, as its percentage frequency ranged from 9.7% to 29.2% in 2018, 9.8% to 29.4% in 2019 and 10.1% to 28.5% in 2020. Medial pivot design had a share of 9.1% in 2018, 8.6% in 2019 and 8.4% in 2020 in Australia, while it only accounted for 1.4% in 2018, 2.1% in 2019 and 2.5% in 2020 in Germany. CONCLUSION: The comparison of arthroplasty registers from England and Wales, Australia, Norway, New Zealand, Germany and Switzerland revealed large differences regarding the application of posterior-stabilized designs, but also common ground considering the overwhelming use of fixed-bearing inserts, which, when inserted correctly, eradicate the potential complication of bearing dislocation. Arthroplasty registers offer a real-world clinical perspective with the aim to improve quality and patient safety.

Musculoskeletal tuberculosis revisited: bone and joint tuberculosis in Austria.

BACKGROUND: To prevent further spread of the disease and secondary deformity, musculoskeletal tuberculosis (TB) remains a challenge in terms of early diagnosis and treatment. This study gives an overview on TB trends in Austria (pulmonary and extrapulmonary TB) (A) and analyses a retrospective series of musculoskeletal TB cases diagnosed and treated at an Austrian tertiary centre (B). METHODS: (A) We analysed data obtained from the Austrian national TB registry to provide information on TB patients´ demographics and manifestation sites between 1995 and 2019. (B) Furthermore, we performed an observational study of all patients with a confirmed diagnosis of musculoskeletal TB who were admitted to the Department of Orthopaedics and Trauma, Medical University of Graz (2005-2019). Demographic, diagnostic, clinical and follow-up data were retrieved from the medical records. RESULTS: (A) From 1995 to 2019, a significant linear reduction in overall Austrian tuberculosis incidence rates occurred (p < 0.001). In the period investigated, Austria recorded a total of 307 patients with musculoskeletal TB. (B) Our retrospective case-series included 17 individuals (9 males, 8 females; average follow-up 48.4 months; range 0-116). There was a biphasic age distribution with a peak in elderly native Austrians (median 69, range 63-92), and a second peak in younger patients with a migration background (median 29, range 18-39). Sites of manifestation were the spine (n = 10), peripheral joints (n = 5), and the soft tissues (n = 2). Diagnosis was based on histology (n = 13), PCR (n = 14), and culture (n = 12). Eleven patients underwent surgery (64.7%). Secondary deformities were frequent (n = 9), and more often observed in patients with spinal TB (n = 6). CONCLUSION: Musculoskeletal TB should be considered if untypical joint infections or nonspecific bone lesions occur in younger patients with a migration background or in patients with specific risk factors.

All-arthroscopic reconstruction of the anterior talofibular ligament is comparable to open reconstruction: a systematic review.

The aim of this study was to determine whether all-arthroscopic repair would lead to improved clinical outcomes, lower complication rates, shorter postoperative immobilization and earlier return to activity compared to open Broström repair in the surgical treatment of chronic lateral ankle instability (CLAI). A systematic literature search was conducted using Pubmed and Embase to identify studies dealing with a comparison of outcomes between all-arthroscopic and open Broström repair for CLAI. The search algorithm was 'ankle instability' AND 'Brostrom' AND 'arthroscopic' AND 'open'. The study had to be written in English language, include a direct comparison of all-arthroscopic and open Broström repair to treat CLAI and have full text available. Exclusion criteria were former systematic reviews, biomechanical studies and case reports. Overall, eight studies met the inclusion criteria and were included in the analysis. Clinical outcomes did not differ substantially between patients treated with either arthroscopic or open Broström repair. Studies that reported on return to activity and sports following surgery suggested that patients that had all-arthroscopic Broström repair returned at a quicker rate. Overall complication rate tended to be lower after arthroscopic Broström repair. Similar to open repair, all-arthroscopic ligament repair for CLAI is a safe treatment option that yields excellent clinical outcomes. Level of Evidence: Level III evidence (systematic review of level I, II and III studies).

Improved Outcome and Earlier Return to Activity After Suture Tape Augmentation Versus Broström Repair for Chronic Lateral Ankle Instability? A Systematic Review.

PURPOSE: To determine whether the use of suture tape augmentation (ST) would lead to improved clinical outcomes, increased stability, shorter postoperative immobilization, and earlier return to activity and sports compared with Broström repair (BR) in surgical treatment of chronic lateral ankle instability (CLAI). METHODS: A systematic literature search was performed using Pubmed and Embase according to PRISMA guidelines. The following search terms were used: ankle instability, suture tape, fiber tape, and internal brace. Full-text articles in English that directly compared BR and ST cohorts were included, with a minimum cohort size of 40 patients. Exclusion criteria were former systematic reviews, biomechanical studies, and case reports. RESULTS: Ultimately, 7 clinical trials were included in this systematic review. Regarding the clinical and radiologic outcomes and complication rates, no major differences were detected between groups. Recurrence of instability and revision surgeries tended to occur more often after BR, whereas irritation of the peroneal nerve and tendons seemed to occur more frequently after ST. Postoperative rehabilitation protocols were either the same for both groups or more aggressive in the ST groups. When both techniques were performed with arthroscopic assistance, return to sports was significantly faster in the ST groups. CONCLUSIONS: In conclusion, suture tape augmentation showed excellent results and is a safe technique comparable to traditional Broström repair. No major differences regarding clinical and radiologic outcomes or complications were found. LEVEL OF EVIDENCE: III, systematic review of level I, II, and III studies.

Can Hardware Removal be Avoided Using Bioresorbable Mg-Zn-Ca Screws After Medial Malleolar Fracture Fixation? Mid-Term Results of a First-In-Human Study.

Ankle is the most common site of hardware removal, mainly performed within 12 months of the primary surgery. The prominence of the metallic hardware is a frequent cause of pain after fracture fixation. Over the last decade, the development of bioresorbable materials based on magnesium (Mg) has increased. Bioresorbable metals aim to avoid a second surgery for hardware removal. METHODS: Twenty patients with isolated, bimalleolar, or trimalleolar ankle fractures were treated with bioresorbable screws made of Mg, 0.45wt% calcium (Ca) and 0.45wt% zinc (Zn) (ZX00). Patient-reported outcome measures (PROMs) including visual analogue scale (VAS) for pain, the presence of complications 6 and 12 months after surgery and the AOFAS scale after 12 months were reported. The functional outcomes were analysed through the range of motion (ROM) of the ankle joint with a standard goniometer. Degradation products and the bioresorbability of the screws were evaluated using plane radiographs. RESULTS: One patient was lost to follow-up. All patients were free of pain, no complications, shoe conflict or misalignement were reported after 12 months of follow-up. No Mg screws were surgically removed. An additional fixation of the distal fibula or the dorsal tibial fragment with conventional titanium implants (Ti) was performed in 17 patients. Within 12 months after primary refixation, 12 of these patients (71%) underwent a second surgery for Ti hardware removal. The mean AOFAS score was 89.8±7.1 and the difference between the treated and the non-treated site in the ROM of the talocrural joint was 2°±11° after 12 months. Radiolucent areas around the screws were attributed to degradation and did not affect clinical or functional outcomes. After one year, the Mg screw heads could not be detected in the plane radiographs of 17 patients which suggests that the majority of the screw head is degraded without introducing adverse reactions. CONCLUSIONS: At 6 and 12 months, the bioresorbable Mg screws show excellent PROMs without complications or need for screw removal. The resorbability of the screw heads in most of the patients after one year could also provide an advantage over conventional bio-inert implants by avoiding related skin irritation due for instance to shoe conflict.

EnzymeML-a data exchange format for biocatalysis and enzymology.

EnzymeML is an XML-based data exchange format that supports the comprehensive documentation of enzymatic data by describing reaction conditions, time courses of substrate and product concentrations, the kinetic model, and the estimated kinetic constants. EnzymeML is based on the Systems Biology Markup Language, which was extended by implementing the STRENDA Guidelines. An EnzymeML document serves as a container to transfer data between experimental platforms, modeling tools, and databases. EnzymeML supports the scientific community by introducing a standardized data exchange format to make enzymatic data findable, accessible, interoperable, and reusable according to the FAIR data principles. An application programming interface in Python supports the integration of software tools for data acquisition, data analysis, and publication. The feasibility of a seamless data flow using EnzymeML is demonstrated by creating an EnzymeML document from a structured spreadsheet or from a STRENDA DB database entry, by kinetic modeling using the modeling platform COPASI, and by uploading to the enzymatic reaction kinetics database SABIO-RK.

Systems Biology in ELIXIR: modelling in the spotlight.

In this white paper, we describe the founding of a new ELIXIR Community - the Systems Biology Community - and its proposed future contributions to both ELIXIR and the broader community of systems biologists in Europe and worldwide. The Community believes that the infrastructure aspects of systems biology - databases, (modelling) tools and standards development, as well as training and access to cloud infrastructure - are not only appropriate components of the ELIXIR infrastructure, but will prove key components of ELIXIR's future support of advanced biological applications and personalised medicine. By way of a series of meetings, the Community identified seven key areas for its future activities, reflecting both future needs and previous and current activities within ELIXIR Platforms and Communities. These are: overcoming barriers to the wider uptake of systems biology; linking new and existing data to systems biology models; interoperability of systems biology resources; further development and embedding of systems medicine; provisioning of modelling as a service; building and coordinating capacity building and training resources; and supporting industrial embedding of systems biology. A set of objectives for the Community has been identified under four main headline areas: Standardisation and Interoperability, Technology, Capacity Building and Training, and Industrial Embedding. These are grouped into short-term (3-year), mid-term (6-year) and long-term (10-year) objectives.

Implementing FAIR data management within the German Network for Bioinformatics Infrastructure (de.NBI) exemplified by selected use cases.

This article describes some use case studies and self-assessments of FAIR status of de.NBI services to illustrate the challenges and requirements for the definition of the needs of adhering to the FAIR (findable, accessible, interoperable and reusable) data principles in a large distributed bioinformatics infrastructure. We address the challenge of heterogeneity of wet lab technologies, data, metadata, software, computational workflows and the levels of implementation and monitoring of FAIR principles within the different bioinformatics sub-disciplines joint in de.NBI. On the one hand, this broad service landscape and the excellent network of experts are a strong basis for the development of useful research data management plans. On the other hand, the large number of tools and techniques maintained by distributed teams renders FAIR compliance challenging.