ABSTRACT
Molecular imprinting technology is well established in areas where a high selectivity is required, such as catalysis, sensing, and separations/sample preparation. However, according to the Principles of Green Chemistry, it is evident that the various steps required to obtain molecularly imprinted polymers (MIPs) are far from ideal. In this regard, greener alternatives to the synthesis of MIPs have been proposed in recent years. However, although it is intuitively possible to design new green MIPs, it would be desirable to have a quantitative measure of the environmental impact of the changes introduced for their synthesis. In this regard, this work proposes, for the first time, a metric tool and software (termed AGREEMIP) to assess and compare the greenness of MIP synthesis procedures. AGREEMIP is based on 12 assessment criteria that correspond to the greenness of different reaction mixture constituents, energy requirements, and the details of MIP synthesis procedures. The input data of the 12 criteria are transformed into individual scores on a 0-1 scale that in turn produce an overall score through the calculation of the weighted average. The assessment can be performed using user-friendly open-source software, freely downloadable from mostwiedzy.pl/agreemip. The assessment result is an easily interpretable pictogram and visually appealing, showing the performance in each of the criteria, the criteria weights, and overall performance in terms of greenness. The application of AGREEMIP is presented with selected case studies that show good discrimination power in the greenness assessment of MIP synthesis pathways.
ABSTRACT
A simple, fast, and green smartphone-based procedure for total biogenic amines content determination in wine was developed and validated. Sample preparation and analysis were simplified to make the method suitable for routine analyses even in resource-scarce settings. The commercially available S0378 dye and smartphone-based detection were used for this purpose. The developed method has satisfactory figures of merit for putrescine equivalent determination with R2 of 0.9981. The method's greenness was also assessed using the Analytical Greenness Calculator. Samples of Polish wine were analysed to demonstrate the applicability of the developed method. Finally, results obtained with the developed procedure were compared with those previously obtained with GC-MS in order to evaluate the equivalence of the methods.
Subject(s)
Wine , Wine/analysis , Smartphone , Biogenic Amines/analysis , Gas Chromatography-Mass Spectrometry , PolandABSTRACT
Stereolithography three-dimensional printing is used increasingly in biomedical applications to create components for use in healthcare and therapy. The exposure of patients to volatile organic compounds (VOCs) emitted from cured resins represents an element of concern in such applications. Here, we investigate the biocompatibility in relation to inhalation exposure of volatile emissions of three different cured commercial resins for use in printing a mouthpiece adapter for sampling exhaled breath. VOC emission rates were estimated based on direct analysis using a microchamber/thermal extractor coupled to a proton transfer reaction-mass spectrometer. Complementary analyses using comprehensive gas chromatography-mass spectrometry aided compound identification. Major VOCs emitted from the cured resins were associated with polymerization agents, additives, and postprocessing procedures and included alcohols, aldehydes, ketones, hydrocarbons, esters, and terpenes. Total VOC emissions from cubes printed using the general-purpose resin were approximately an order of magnitude higher than those of the cubes printed using resins dedicated to biomedical applications at the respective test temperatures (40 and 25 °C). Daily inhalation exposures were estimated and compared with daily tolerable intake levels or standard thresholds of toxicological concerns. The two resins intended for biomedical applications were deemed suitable for fabricating an adapter mouthpiece for use in breath research. The general-purpose resin was unsuitable, with daily inhalation exposures for breath sampling applications at 40 °C estimated at 310 µg day-1 for propylene glycol (tolerable intake (TI) limit of 190 µg day-1) and 1254 µg day-1 for methyl acrylate (TI of 43 µg day-1).
Subject(s)
Volatile Organic Compounds , Humans , Volatile Organic Compounds/analysis , Stereolithography , Gas Chromatography-Mass Spectrometry , Mass Spectrometry , Hydrocarbons/analysisABSTRACT
Indoor air is a complex and dynamic mixture comprising manifold volatile organic compounds (VOCs) that may cause physiological and/or psychological discomfort, depending on the nature of exposure. This technical note presents a novel approach to analyze VOC emissions by coupling a microchamber/thermal extractor (µ-CTE) system to a proton transfer reaction-mass spectrometer (PTR-MS). This configuration provides an alternative to conventional emissions testing of small objects. The dynamic emission profiles of VOCs from a representative 3D-printed model are presented as a proof-of-concept analysis. Emission profiles are related to the target compound volatility, whereby 2-propanol and acetaldehyde exhibited the highest emissions and most rapid changes compared to the less volatile vinyl crotonate, 2-hydroxymethyl methacrylate, and mesitaldehyde, which were present at lower concentrations and showed different dynamics. Comparative measurements of the emission profiles of these compounds either with or without prior static equilibration yielded stark differences in their dynamics, albeit converging to similar values after 15 min of sampling time. Further, the utility of this system to determine the time required to capture a specific proportion of volatile emissions over the sampling period was demonstrated, with a mean duration of 8.4 ± 0.3 min to sample 50% of emissions across all compounds. This novel configuration provides a means to characterize the dynamic nature of VOC emissions from small objects and is especially suited to measuring highly volatile compounds, which can present a challenge for conventional sampling and analysis approaches. Further, it represents an opportunity for rapid, targeted emissions analyses of products to screen for potentially harmful volatiles.
Subject(s)
Air Pollutants , Volatile Organic Compounds , Volatile Organic Compounds/analysis , Protons , Mass Spectrometry/methods , Air Pollutants/analysisABSTRACT
Polyphenols, organic acids and metal ions are an important group of compounds that affect the human health and quality of food and beverage products, including wines. It is known that a specific correlation between these groups exist. While wines coming from the New World and the Old World countries are extensively studied, wines coming from cool-climate countries are rarely discussed in the literature. One of the goals of this study was to determine the elemental composition of the wine samples, which later on, together as polyphenols and organic acids content, was used as input data for chemometric analysis. The multivariate statistical approach was applied in order to find specific correlations between the selected group of compounds in the cool-climate wines and the features that distinguish the most and differ between red and white wines and rosé wines. Moreover, special attention was paid to resveratrol and its correlation with selected wine constituents.
Subject(s)
Wine , Acids/analysis , Humans , Metals/analysis , Organic Chemicals/analysis , Polyphenols/analysis , Resveratrol/analysis , Wine/analysisABSTRACT
In this short communication we characterize the emission of volatile organic compounds (VOCs) from fused filament fabrication (FFF) 3D printing using four polymer materials, namely polyethylene terephthalate glycol-modified (PETG), acrylonitrile styrene acrylate (ASA), Nylon, and acrylonitrile butadiene styrene (ABS). Detailed emission profiles are obtained during thermal degradation of the polymers as a function of temperature and also in real-time during 3D printing. Direct quantitative measurement was performed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Qualitative determination of the volatiles emitted from the printed elements at various temperatures was accomplished using gas chromatography-mass spectrometry (GC-MS). The emission rates of VOCs differ significantly between the different polymer filaments, with the emission from Nylon and PETG more than an order of magnitude lower than that of ABS.
Subject(s)
Acrylonitrile , Air Pollution, Indoor , Volatile Organic Compounds , Air Pollution, Indoor/analysis , Butadienes/chemistry , Nylons , Particulate Matter/analysis , Polymers , Printing, Three-Dimensional , Styrene/analysis , Thiogalactosides , Volatile Organic Compounds/analysisABSTRACT
Establishing the emission profile of volatile organic compounds generated during fused deposition modeling 3D printing using polymer filaments is important in terms of both understanding the processes taking place during thermal degradation of thermoplastics, and assessing the user's exposure to potentially harmful volatiles. However, obtaining detailed, real-time qualitative and quantitative results poses a challenge. In this paper solid-phase microextraction-gas chromatography-time-of-flight mass spectrometry and proton transfer reaction time-of-flight mass spectrometry were used to identify and monitor the emission of volatiles during thermal degradation of polylactide filaments and during 3D printing. Filaments of two different grades and three colours were used. It was possible to obtain detailed, time- and temperature-resolved emission profiles of the main products of thermal decomposition of lactide and polylactide 3D printing filaments at concentration levels of a few µg/g. This revealed different temperature-dependent emission characteristics of particular volatiles, such as, among others, lactide, acetaldehyde, acetic acid, and 2-butanone between various polylactide 3D printing filaments. This approach can be used to monitor the emission associated with printing with various other types of polymer 3D printing materials.
Subject(s)
Volatile Organic Compounds , Gas Chromatography-Mass Spectrometry , Polyesters , Printing, Three-Dimensional , Volatile Organic Compounds/analysisABSTRACT
The concentration of biogenic amines (BAs) in beer depends, among other factors, on the activity of microorganisms, in particular lactic acid bacteria. In this work an analytical method based on derivatization with tosyl chloride and high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was used to determine 17 BAs in samples of commercially available beers, and to monitor the changes in concentration of several BAs throughout the fermentation process. In some of the analysed samples the concentration of BAs exceeded the safety threshold for consumers. During the fermentation stage of home-brewing of ale the concentration of spermine in the wort increased until the end of the stormy fermentation, to then drop below the initial concentration at the end of fermentation, and below the LOQ after refermentation. The results of the study indicate that monitoring the total content of BAs is required due to the potential risk to human health.
ABSTRACT
Volatile compounds carry valuable information regarding the properties of foodstuffs. Volatiles emitted from food can be used as, for example, indicators of quality, shelf-life, or authenticity. A better understanding of the multitude of transformations which occur during food processing could facilitate the optimisation of production, increase the desirability of food products, and also their wholesomeness. However, as some of these transformations are fast-paced, it is necessary to monitor them using techniques which enable real-time determination of volatiles, such as proton transfer reaction-mass spectrometry (PTR-MS). Recent years have seen a marked increase in its use in food analysis, since it can be used to obtain insight into the dynamics of the monitored processes and can be the basis for precise quality control methods for food processing. This review highlights recent works in which PTR-MS was used in monitoring during foodstuffs production, preparation and storage.
Subject(s)
Volatile Organic Compounds , Food Analysis , Food Handling , Mass Spectrometry , Protons , Volatile Organic Compounds/analysisABSTRACT
Linden trees are a source of food products called lime flowers (Tiliae flos), traditionally used in the form of infusion for the treatment of feverish colds and coughs. Lime flowers should include flowers of Tilia cordata Mill, T.x europaea L., and T. platyphyllos Scop. or a mixture of these. The aim of current research was to establish a fast, sensitive HPTLC (high-performance thin-layer chromatography) method that would allow the differentiation of material obtained from five species of lime occurring in Europe. The fingerprints for distinguishing these species were established, as well as a key for identification based on a visual evaluation of chromatograms. The results obtained were also subjected to chemometric analyses. It was shown that each species contains characteristic compounds i.e. linarin that can be used for their identification. The method developed can, in theory, be introduced for the quality control or authentication of linden flowers on the European market.
Subject(s)
Chromatography, Thin Layer , Flowers/chemistry , Food Analysis/methods , Teas, Herbal/analysis , Tilia/chemistry , Quality ControlABSTRACT
We describe a concept study in which the changes of concentration of benzene, toluene, ethylbenzene, and xylene (BTEX) compounds and styrene within a 3D printer enclosure during printing with different acrylonitrile butadiene styrene (ABS) filaments were monitored in real-time using a proton transfer reaction mass spectrometer and an electronic nose. The quantitative data on the concentration of the BTEX compounds, in particular the concentration of carcinogenic benzene, were then used as reference values for assessing the applicability of an array of low-cost electrochemical sensors in monitoring the exposure of the users of consumer-grade fused deposition modelling 3D printers to potentially harmful volatiles. Using multivariate statistical analysis and machine learning, it was possible to determine whether a set threshold limit value for the concentration of BTEX was exceeded with a 0.96 classification accuracy and within a timeframe of 5 min based on the responses of the chemical sensors.
ABSTRACT
Green analytical chemistry focuses on making analytical procedures more environmentally benign and safer to humans. The amounts and toxicity of reagents, generated waste, energy requirements, the number of procedural steps, miniaturization, and automation are just a few of the multitude of criteria considered when assessing an analytical methodology's greenness. The use of greenness assessment criteria requires dedicated tools. We propose the Analytical GREEnness calculator, a comprehensive, flexible, and straightforward assessment approach that provides an easily interpretable and informative result. The assessment criteria are taken from the 12 principles of green analytical chemistry (SIGNIFICANCE) and are transformed into a unified 0-1 scale. The final score is calculated based on the SIGNIFICANCE principles. The result is a pictogram indicating the final score, performance of the analytical procedure in each criterion, and weights assigned by the user. Freely available software makes the assessment procedure straightforward. It is open-source and downloadable from https://mostwiedzy.pl/AGREE.
Subject(s)
Green Chemistry Technology , Software , HumansABSTRACT
The use of the 'omics techniques in environmental research has become common-place. The most widely implemented of these include metabolomics, proteomics, genomics, and transcriptomics. In recent years, a similar approach has also been taken with the analysis of volatiles from biological samples, giving rise to the so-called 'volatilomics' in plant analysis. Developments in direct infusion mass spectrometry (DI-MS) techniques have made it possible to monitor the changes in the composition of volatile flux from parts of plants, single specimens, and entire ecosystems in real-time. The application of these techniques enables a unique insight into the dynamic metabolic processes that occur in plants. Here, we provide an overview of the use of DI-MS in real-time volatilomics research involving plants.
Subject(s)
Ecosystem , Metabolomics , Genomics , Mass Spectrometry , ProteomicsABSTRACT
The biogenic amines index of fresh chicken meat samples during refrigerated storage was predicted based on the headspace analysis using an electronic nose equipped with an array of electrochemical sensors. The reference biogenic amines index values were obtained using dispersive liquidâ»liquid microextractionâ»gas chromatographyâ»mass spectrometry. A prototype electronic nose with modular construction and a dedicated sample chamber was used to rapidly analyze the volatile fraction of chicken meat samples, with a single measurement time of five minutes. Back-propagation artificial neural network was used to estimate the biogenic amines index of the samples with a determination coefficient of 0.954 based on ten-fold stratified cross-validation. The results indicate that the determination of the biogenic amines index is a good reference method for studies in which the freshness of meat products is assessed based on headspace analysis and fingerprinting, and that the described electronic device can be used to assess poultry meat freshness based on this value with high accuracy.
Subject(s)
Biogenic Amines/analysis , Electronic Nose , Meat/analysis , Animals , Biogenic Amines/isolation & purification , Chickens , Gas Chromatography-Mass Spectrometry , Limit of Detection , Liquid Phase Microextraction , Neural Networks, ComputerABSTRACT
BACKGROUND: Electronic nose technology is being developed in order to analyse complex mixtures of volatiles in a way parallel to biologic olfaction. When applied in the field of medicine, the use of such devices should enable the identification and discrimination between different diseases. In this review, a comprehensive summary of research in medical diagnostics using electronic noses is presented. A special attention has been paid to the application of these devices and sensor technologies, in response to current trends in medicine. METHODS: Peer-reviewed research literature pertaining to the subject matter was identified based on a search of bibliographic databases. The quality and relevance of retrieved papers was assessed using standard tools. Their content was critically reviewed and certain information contained therein was compiled in tabularized form. RESULTS: The majority of reviewed studies show promising results, often surpassing the accuracy and sensitivity of established diagnostic methods. However, only a relatively small number of devices have been field tested. The methods used for sample collection and data processing in various studies were listed in a table, together with electronic nose models used in these investigations. CONCLUSION: Despite the fact that devices equipped with arrays of chemical sensors are not routinely used in everyday medical practice, their prospective use would solve some established issues in medical diagnostics, as well as lead to developments in prophylactics by facilitating a widespread use of non-invasive screening tests.
Subject(s)
Diagnostic Techniques and Procedures/instrumentation , Electronic Nose , HumansABSTRACT
This tutorial review is a critical commentary on the combined use of two instrumental analytical techniques, namely GC-MS and PTR-MS. The first mention of such an analytical approach likely appeared after the year 2000 and despite many advantages, it has not been applied very often. Therefore, the aim of this article is to elaborate on the concept of their combined use and to provide a curse tutorial for those considering taking such an approach. The issue of complementarity was raised in a broad sense of this term. Special emphasis was placed on indicating the possibilities of complementary utilization of GC-MS and PTR-MS and presenting the advantages and disadvantages as well as the current application of these techniques when used together.
ABSTRACT
ABSTRACT: To supplement the currently used methods for poultry meat shelf life assessment, it might be necessary to develop a technique for rapid headspace analysis of volatiles with no prior sample preparation step. Biogenic amines, in particular cadaverine, are considered meat spoilage indicators. Described in this article are the results of a preliminary investigation of the applicability of proton transfer reaction mass spectrometry in the determination of cadaverine concentration in the volatile fraction of poultry meat samples stored in aerobic conditions. Dispersive liquid-liquid microextraction-gas chromatography-mass spectrometry and determination of total viable bacteria were used as reference methods. It was determined that there is a good correlation (Pearson correlation of 0.96) between the concentration of cadaverine in the headspace of chicken meat samples stored over a period of 5 days and the total viable bacteria count. Based on the results, it can be concluded that the changes of cadaverine concentration in the meat samples' volatile fraction can be successfully monitored with a short time of a single analysis and with no sample preparation.
ABSTRACT
ABSTRACT: To safeguard the consumers' well-being, it is necessary to develop novel methods for determination of carcinogens in food, including volatiles generated during frying. The currently used procedures for analysis of volatile fraction of vegetable oils are not based on real-time measurements and thus do not enable the determination of carcinogenic compounds in frying fumes; instead, only the headspace or liquid fraction is sampled. In this article, described is an approach in which proton transfer reaction mass spectrometry with time-of-flight analyser (PTR-TOFMS) was used for real-time monitoring of carcinogenic compounds generated during thermal degradation of rapeseed oil. Using PTR-MS, it was possible to monitor the concentration of known volatile carcinogens according to the International Agency for Research on Cancer (IARC), alongside BTEX compounds, acrolein, and selected aldehydes. Moreover, the applicability of several supervised data analysis methods for the classification of oil samples according to their degree of thermal degradation was presented, with best results obtained using the k-nearest neighbours algorithm. Proton transfer reaction mass spectrometry is a powerful technique for the determination of carcinogenic compounds generated during thermal degradation of edible oils. Further investigation of the chemical processes which occur during frying can lead to improvement of food safety.
ABSTRACT
Odour nuisance poses a serious problem in many urban areas, yet its evaluation and mitigation is often omitted in the urban planning process. By identifying its range and spatio-temporal variations, it could be taken into consideration by planners in urban development strategies and land use decisions. The aim of the study was to present the application of odour evaluation techniques in the improvement of the quality of life in the built environment. The problem of odours is discussed in regard to human health, social aspects and current practices in the management of spatial development. The application possibilities of field olfactometry are demonstrated based on a case study of a municipal landfill which is a major source of odour nuisance for the adjacent areas. The results of odour nuisance measurements were field olfactometry combined with topographical and meteorological data. Using dispersion modelling (non-steady-state Lagrangian Gaussian puff model CALPUFF with dedicated meteorological pre-processor CALMET) it was possible to calculate odour concentrations and to place the measured odour concentrations in a specific spatial context. The obtained results were juxtaposed with local development strategies and discussed in the context of environmental-based planning. We suggest that odour evaluation and dispersion modelling are valid tools in managing the dynamics of urban growth.