Effect of Glass Transition Temperature on Enhanced Dielectric Breakdown Strength and Lifetime of Multilayer Polymer Films.

High temperature, high energy density, and low loss dielectric films are promising candidates for miniaturized capacitors in electric vehicles and high-speed trains. However, single-component polymers could not achieve these desired properties simultaneously. Polymer multilayer films (MLFs), which combine a high dielectric constant polymer [e.g., poly(vinylidene fluoride) (PVDF)] and a high breakdown/low loss polymer [e.g., polycarbonate (PC)] in a unique layered structure, have the potential achieve them at the same time. In this work, the effects of PC glass transition temperature (Tg) on the dielectric insulation properties (breakdown strength and lifetime) were investigated at high temperatures of 100-150 °C. Three PC materials had Tg values of 145 (PC1), 165 (PC2), and 185 °C (PC3), respectively. It is observed that MLF-PC3 with the highest Tg of PC exhibited the highest Weibull direct/alternating current (DC/AC) breakdown strength and the longest DC/AC lifetime, whereas MLF-PC1 with the lowest Tg showed the lowest Weibull DC/AC breakdown strength and the shortest DC/AC lifetime. A high-temperature high-volage leakage current study revealed that MLF-PC3 exhibited the lowest bulk conductivity at all temperatures under different electric fields. The knowledge obtained from this study will help us design better MLFs with high performance for next-generation miniaturized capacitors.

A humanized nanobody phage display library yields potent binders of SARS CoV-2 spike.

Neutralizing antibodies targeting the SARS-CoV-2 spike protein have shown a great preventative/therapeutic potential. Here, we report a rapid and efficient strategy for the development and design of SARS-CoV-2 neutralizing humanized nanobody constructs with sub-nanomolar affinities and nanomolar potencies. CryoEM-based structural analysis of the nanobodies in complex with spike revealed two distinct binding modes. The most potent nanobody, RBD-1-2G(NCATS-BL8125), tolerates the N501Y RBD mutation and remains capable of neutralizing the B.1.1.7 (Alpha) variant. Molecular dynamics simulations provide a structural basis for understanding the neutralization process of nanobodies exclusively focused on the spike-ACE2 interface with and without the N501Y mutation on RBD. A primary human airway air-lung interface (ALI) ex vivo model showed that RBD-1-2G-Fc antibody treatment was effective at reducing viral burden following WA1 and B.1.1.7 SARS-CoV-2 infections. Therefore, this presented strategy will serve as a tool to mitigate the threat of emerging SARS-CoV-2 variants.

High-throughput Confocal Imaging of Quantum Dot-Conjugated SARS-CoV-2 Spike Trimers to Track Binding and Endocytosis in HEK293T Cells.

The development of new technologies for cellular fluorescence microscopy has facilitated high-throughput screening methods for drug discovery. Quantum dots are fluorescent nanoparticles with excellent photophysical properties imbued with bright and stable photoluminescence as well as narrow emission bands. Quantum dots are spherical in shape, and with the proper modification of the surface chemistry, can be used to conjugate biomolecules for cellular applications. These optical properties, combined with the ability to functionalize them with biomolecules, make them an excellent tool for investigating receptor-ligand interactions and cellular trafficking. Here, we present a method that uses quantum dots to track the binding and endocytosis of SARS-CoV-2 spike protein. This protocol can be used as a guide for experimentalists looking to utilize quantum dots to study protein-protein interactions and trafficking in the context of cellular physiology.

A humanized nanobody phage display library yields potent binders of SARS CoV-2 spike.

Neutralizing antibodies targeting the SARS-CoV-2 spike protein have shown a great preventative/therapeutic potential. Here, we report a rapid and efficient strategy for the development and design of SARS-CoV-2 neutralizing humanized nanobody constructs with sub-nanomolar affinities and nanomolar potencies. CryoEM-based structural analysis of the nanobodies in complex with spike revealed two distinct binding modes. The most potent nanobody, RBD-1-2G(NCATS-BL8125), tolerates the N501Y RBD mutation and remains capable of neutralizing the B.1.1.7 (Alpha) variant. Molecular dynamics simulations provide a structural basis for understanding the neutralization process of nanobodies exclusively focused on the spike-ACE2 interface with and without the N501Y mutation on RBD. A primary human airway air-lung interface (ALI) ex vivo model showed that RBD-1-2G-Fc antibody treatment was effective at reducing viral burden following WA1 and B.1.1.7 SARS-CoV-2 infections. Therefore, this presented strategy will serve as a tool to mitigate the threat of emerging SARS-CoV-2 variants.

Fluorescent quantum dots enable SARS-CoV-2 antiviral drug discovery and development.

INTRODUCTION: SARS-CoV-2 is a highly infectious and deadly coronavirus whose study requires the use of a biosafety level 3 (BSL-3) containment facility to investigate viral biology and pathogenesis, which limits the study of live virus and slows progress toward finding suitable treatments for infection. While vaccines from several companies have proven very effective in combating the virus, few treatments exist for those who do succumb to the viral-induced systemic disease called COVID-19. AREAS COVERED: This short review focuses on fluorescent quantum dot-based modeling of SARS-CoV-2. New BSL-2 viral models are essential for finding small molecules and biologics that may be effective in stopping viral infection, as well as treating already infected individuals. Nanoparticles are invaluable tools for biological research as they can be used to both model pathogens and serve as a platform for developing vaccines. EXPERT OPINION: Visualizing viral activity with fluorescent quantum dots enables both biochemical and cell-based assays to detect virus-host receptor interactions, cellular activity after binding to the cell plasma membrane, screening for interventions using small-molecule drug repurposing, and testing of novel biologics. Quantum dots can also be used for diagnostic assays, vaccine development, and importantly, pan-antiviral drugs to address variants that may escape the immune response.

The SARS-CoV-2 Cytopathic Effect Is Blocked by Lysosome Alkalizing Small Molecules.

Understanding the SARS-CoV-2 virus' pathways of infection, virus-host-protein interactions, and mechanisms of virus-induced cytopathic effects will greatly aid in the discovery and design of new therapeutics to treat COVID-19. Chloroquine and hydroxychloroquine, extensively explored as clinical agents for COVID-19, have multiple cellular effects including alkalizing lysosomes and blocking autophagy as well as exhibiting dose-limiting toxicities in patients. Therefore, we evaluated additional lysosomotropic compounds to identify an alternative lysosome-based drug repurposing opportunity. We found that six of these compounds blocked the cytopathic effect of SARS-CoV-2 in Vero E6 cells with half-maximal effective concentration (EC50) values ranging from 2.0 to 13 µM and selectivity indices (SIs; SI = CC50/EC50) ranging from 1.5- to >10-fold. The compounds (1) blocked lysosome functioning and autophagy, (2) prevented pseudotyped particle entry, (3) increased lysosomal pH, and (4) reduced (ROC-325) viral titers in the EpiAirway 3D tissue model. Consistent with these findings, the siRNA knockdown of ATP6V0D1 blocked the HCoV-NL63 cytopathic effect in LLC-MK2 cells. Moreover, an analysis of SARS-CoV-2 infected Vero E6 cell lysate revealed significant dysregulation of autophagy and lysosomal function, suggesting a contribution of the lysosome to the life cycle of SARS-CoV-2. Our findings suggest the lysosome as a potential host cell target to combat SARS-CoV-2 infections and inhibitors of lysosomal function could become an important component of drug combination therapies aimed at improving treatment and outcomes for COVID-19.

Quantum Dot-Conjugated SARS-CoV-2 Spike Pseudo-Virions Enable Tracking of Angiotensin Converting Enzyme 2 Binding and Endocytosis.

The first step of SARS-CoV-2 infection is binding of the spike protein's receptor binding domain to the host cell's ACE2 receptor on the plasma membrane. Here, we have generated a versatile imaging probe using recombinant Spike receptor binding domain conjugated to fluorescent quantum dots (QDs). This probe is capable of engaging in energy transfer quenching with ACE2-conjugated gold nanoparticles to enable monitoring of the binding event in solution. Neutralizing antibodies and recombinant human ACE2 blocked quenching, demonstrating a specific binding interaction. In cells transfected with ACE2-GFP, we observed immediate binding of the probe on the cell surface followed by endocytosis. Neutralizing antibodies and ACE2-Fc fully prevented binding and endocytosis with low nanomolar potency. Importantly, we will be able to use this QD nanoparticle probe to identify and validate inhibitors of the SARS-CoV-2 Spike and ACE2 receptor binding in human cells. This work enables facile, rapid, and high-throughput cell-based screening of inhibitors for coronavirus Spike-mediated cell recognition and entry.

Effects of Interphase Modification and Biaxial Orientation on Dielectric Properties of Poly(ethylene terephthalate)/Poly(vinylidene fluoride-co-hexafluoropropylene) Multilayer Films.

Recently, poly(vinylidene fluoride) (PVDF)-based multilayer films have demonstrated enhanced dielectric properties, combining high energy density and high dielectric breakdown strength from the component polymers. In this work, further enhanced dielectric properties were achieved through interface/interphase modulation and biaxial orientation for the poly(ethylene terephthalate)/poly(methyl methacrylate)/poly(vinylidene fluoride-co-hexafluoropropylene) [PET/PMMA/P(VDF-HFP)] three-component multilayer films. Because PMMA is miscible with P(VDF-HFP) and compatible with PET, the interfacial adhesion between PET and P(VDF-HFP) layers should be improved. Biaxial stretching of the as-extruded multilayer films induced formation of highly oriented fibrillar crystals in both P(VDF-HFP) and PET, resulting in improved dielectric properties with respect to the unstretched films. First, the parallel orientation of PVDF crystals reduced the dielectric loss from the αc relaxation in α crystals. Second, biaxial stretching constrained the amorphous phase in P(VDF-HFP) and thus the migrational loss from impurity ions was reduced. Third, biaxial stretching induced a significant amount of rigid amorphous phase in PET, further enhancing the breakdown strength of multilayer films. Due to the synergistic effects of improved interfacial adhesion and biaxial orientation, the PET/PMMA/P(VDF-HFP) 65-layer films with 8 vol % PMMA exhibited optimal dielectric properties with an energy density of 17.4 J/cm(3) at breakdown and the lowest dielectric loss. These three-component multilayer films are promising for future high-energy-density film capacitor applications.

Electric Field Modulation of Semiconductor Quantum Dot Photoluminescence: Insights Into the Design of Robust Voltage-Sensitive Cellular Imaging Probes.

The intrinsic properties of quantum dots (QDs) and the growing ability to interface them controllably with living cells has far-reaching potential applications in probing cellular processes such as membrane action potential. We demonstrate that an electric field typical of those found in neuronal membranes results in suppression of the QD photoluminescence (PL) and, for the first time, that QD PL is able to track the action potential profile of a firing neuron with millisecond time resolution. This effect is shown to be connected with electric-field-driven QD ionization and consequent QD PL quenching, in contradiction with conventional wisdom that suppression of the QD PL is attributable to the quantum confined Stark effect.

Dynamics of energy transfer of a dioxolane-substituted pentacene dispersed in 4,4-bis[N-1-naphthyl-N-phenylamino]biphenyl.

We examine the steady-state and time-resolved photoluminescence of guest-host films featuring a dioxolane-substituted pentacene derivative (2,2,10,10-tetraethyl-6,14-bis(triisopropylsilylethynyl)-1,3,9,11-tetraoxadicyclopenta[b,m]pentacene, EtTP-5) dispersed in the hole transporting material (4,4-bis[N-1-naphthyl-N-phenylamino]biphenyl, alpha-NPD). The films show bright red emission (lambda(max) = 640 nm) as a result of efficient Förster energy transfer from alpha-NPD host molecules to EtTP-5 guest molecules. High absolute photoluminescence (PL) quantum yield (phi(PL) = 76% +/- 4%) and fluorescence lifetime (tau = 18.6 +/- 0.8 ns) were measured at low concentration (0.28 mol % EtTP-5), with moderate PL quenching observed upon increasing the EtTP-5 concentration. The concentrated films (> or = 1.50 mol % EtTP-5) show less evidence of aggregation than previously seen when EtTP-5 was dispersed in tris(quinolin-8-olato)aluminum(III), making alpha-NPD a superior host for the red-emitting EtTP-5.

Photophysical properties of dioxolane-substituted pentacene derivatives dispersed in tris(quinolin-8-olato)aluminum(III).

Two novel dioxolane-substituted pentacene derivatives, namely, 6,14-bis-(triisopropylsilylethynyl)-1,3,9,11-tetraoxa-dicyclopenta[b,m]pentacene (TP-5) and 2,2,10,10-tetraethyl-6,14-bis-(triisopropylsilylethynyl)-1,3,9,11-tetraoxa-dicyclopenta[b,m]pentacene (EtTP-5), have been synthesized and spectroscopically characterized. Here, we examine the steady-state and time-resolved photoluminescence (PL) of solid-state composite films containing these pentacene derivatives dispersed in tris(quinolin-8-olato)aluminum(III) (Alq(3)). The films show narrow red emission and high absolute photoluminescence quantum yields (phi(PL) = 59% and 76% for films containing approximately 0.25 mol % TP-5 and EtTP-5, respectively). The Förster transfer radius for both guest-host systems is estimated to be approximately 33 A. The TP-5/Alq(3) thin films show a marked decrease in phi(PL) with increasing guest molecule concentrations, accompanied by dramatic changes in the PL spectra, suggesting that intermolecular interactions between pentacene molecules result in the formation of weakly radiative aggregates. In contrast, a lesser degree of fluorescence quenching is observed for EtTP-5/Alq(3) films. The measured fluorescence lifetimes of TP-5 and EtTP-5 are similar (approximately 18 ns) at low concentrations but deviate at higher concentrations as aggregation begins to play a role in the TP-5/Alq(3) films. The onset of aggregation in EtTP-5/Alq(3) films occurs at higher guest molecule concentrations (>1.00 mol %). The addition of ethyl groups on the terminal dioxolane rings leads to an increase in the intermolecular spacing in the solid, thereby reducing the tendency for pi-pi molecular stacking and aggregation.

Excitation energy transfer in tris(8-hydroxyquinolinato)aluminum doped with a pentacene derivative.

We investigate the excitation energy transfer in a guest-host molecular system consisting of a pentacene derivative, namely 6,13-bis(2,6-dimethylphenyl)pentacene (DMPP), doped into tris(8-hydroxyquinolinato)aluminum (Alq(3)) using steady-state and time-resolved photoluminescence (PL) spectroscopy. The concentration dependent energy transfer rate and efficiency are calculated and analyzed in terms of the Förster resonance energy transfer model. A relatively long excitation transfer time ( approximately 0.6-3.4 ns depending on the DMPP concentration) and a large transfer radius (31-36 A) are obtained. The Förster radius calculated directly from the Alq(3) PL-DMPP absorption spectral overlap (26 A) is smaller than the transfer radii obtained from the PL studies, which suggests that excitation energy migration within Alq(3) plays an important role in the energy transfer process, effectively elongating the transfer radius and increasing the transfer rate and efficiency.

Thermolysis of fluorinated cycloalkylidene fulgides yields a new class of photochromic compounds.

A series of fluorinated cycloalkylidene indolylfulgides has been designed, synthesized and characterized; most of the thermolysis products of these fulgides maintain photochromicity and display outstanding thermal and photochemical stability.

Tuning the optical properties of fluorinated indolylfulgimides.

Photochromic fluorinated indolylfulgides have been identified as potential candidates for a wide range of applications including optical switches, photoregulators of biological processes, and optical memory media. In humid environments or biological systems, hydrolytic stability is essential. In an effort to improve hydrolytic stability, a series of indolylfulgimides has been synthesized from a parent trifluoromethyl-substituted indolylfulgide. The nitrogen of the succinimide moiety is linked to either a dimethyl amino or one of seven substituted phenyl groups. The phenyl groups feature substituents with increasing electron-withdrawing ability. The spectral characteristics of each compound have been examined, revealing that the wavelength absorption maxima of each form increases with increasing electron-withdrawing ability of the substituted N-phenyl ring. The quantum yields of the photoreactions have been determined with the N-(phenyl)fulgimide showing a ring closure value of nearly 0.30 in toluene. In addition, the hydrolytic, thermal, and photochemical stabilities of each compound have been measured. The fulgimides exhibit at least a 200-fold enhancement of hydrolytic stability for the Z-form and over a 1000-fold enhancement for the C-form in comparison to the same form of the parent fulgide. The N-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)fulgimide can undergo up to 3000 photochemical cycles (coloration followed by bleaching) before losing 20% of its initial absorbance at photostationary state.

Structural properties of a series of photochromic fluorinated indolylfulgides.

Fluorinated indolylfulgides are a class of photochromic organic compounds that meet many of the requirements for use as optical memory media and optical switches. The X-ray crystal structures of a series of five photochromic fluorinated indolylfulgides have been determined, namely (3Z)-3-[1-(1,2-dimethyl-1H-indol-3-yl)-2,2,2-trifluoroethylidene]-4-(1-methylethylidene)dihydrofuran-2,5-dione (trifluoromethylisopropylideneindolylfulgide), C(19)H(16)F(3)NO(3), (I), (3Z)-3-[1-(1,2-dimethyl-1H-indol-3-yl)-2,2,3,3,3-pentafluoropropylidene]-4-(1-methylethylidene)dihydrofuran-2,5-dione (pentafluoroethylisopropylideneindolylfulgide), C(20)H(16)F(5)NO(3), (II), (3Z)-3-[1-(1,2-dimethyl-1H-indol-3-yl)-2,2,3,3,4,4,4-heptafluorobutylidene]-4-(1-methylethylidene)dihydrofuran-2,5-dione (heptafluoropropylisopropylideneindolylfulgide), C(21)H(16)F(7)NO(3), (III), (3Z)-3-[1-(1,2-dimethyl-1H-indol-3-yl)-2,2,2-trifluoroethylidene]-4-(tricyclo[3.3.1.1(3,7)]decylidene)dihydrofuran-2,5-dione (trifluoromethyladamantylideneindolylfulgide), C(26)H(24)F(3)NO(3), (IV), and (3Z)-3-[1-(1,2-dimethyl-1H-indol-3-yl)-2,2,3,3,4,4,4-heptafluorobutylidene]-4-(tricyclo[3.3.1.1(3,7)]decylidene)dihydrofuran-2,5-dione (heptafluoropropyladamantylideneindolylfulgide), C(28)H(24)F(7)NO(3), (V). The photochromic property of fulgides is based on the photochemically allowed electrocyclic ring closure of a hexatriene system to form a cyclohexadiene. For each fulgide examined, the bond lengths within the hexatriene system alternate between short and long, as expected. Comparing the structures of the five fulgides with each other demonstrates no significant difference in bond lengths, bond angles or dihedral angles within the hexatriene systems. The distance between the bond-forming C atoms at each end of the hexatriene system does vary. Correlations of structural properties with optical properties are addressed.