ABSTRACT
Pressure-sensitive paints (PSP) enable non-intrusive visualization of surface pressure distribution on model surface which is important for aerodynamic studies. However, conventional PSP materials suffer from photobleaching and inadequate sensitivity. In this work, we rationally designed and synthesized novel dendritic oxygen probes (PT1 and PT2) by covalently grafting fluorinated dendrons onto platinum tetrakis(pentafluorophenyl)porphyrin (PT0) (a common oxygen probe). Subsequently, PT2 loaded nanofibers membranes from polycaprolactone (PCL) were fabricated by electrospinning. Fabricated membranes showed high oxygen sensitivity (I0/I100 = 35.3) with excellent flexibility, good reversibility, and outstanding photostability (merely 2.0% intensity loss after prolonged irradiation). The pressure sensitivity was found around 0.73 % per kilopascal. Furthermore, significant variation in emission intensity with respect to the variation in air pressure (1.3-101.32 kPa), facilitates the naked eye visualization of the pressure distribution on the membrane surface. Such excellent oxygen and pressure sensitivity and photostability might be due to high fluorine contents of complex dendritic structure of PT2. This flexible fluorine-functionalized dendritic oxygen probe puts forward a facile and effective strategy to develop advanced PSP materials enabling accurate pressure mapping for aerodynamic studies.
ABSTRACT
The development of a robust quasi-ohmic contact with minimal resistance, good stability and cost-effectiveness is crucial for perovskite solar cells. We introduce a generic approach featuring a Lewis-acid layer sandwiched between dopant-free semicrystalline polymer and metal electrode in perovskite solar cells, resulting in an ideal quasi-ohmic contact even at elevated temperature up to 85 °C. The solubility of Lewis acid in alcohol facilitates nondestructive solution processing on top of polymer, which boosts hole injection from polymer into metal by two orders of magnitude. By integrating the polymer-acid-metal structure into solar cells, devices exhibit remarkable resilience, retaining 96% ± 3%, 96% ± 2% and 75% ± 7% of their initial efficiencies after continuous operation in nitrogen at 35 °C for 2212 h, 55 °C for 1650 h and 85 °C for 937 h, respectively. Leveraging the Arrhenius relation, we project an impressive T80 lifetime of 26,126 h at 30 °C.
ABSTRACT
High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of the molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle "Like dissolves like," we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electronic properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production.
ABSTRACT
4,4'-Spiro-bis[cyclopenta[2,1-b;3,4-b']dithiophene] (SCT) is a versatile building block for constructing three-dimensional (3D) π-conjugated molecules for use in organic electronics. In this paper, we report a more convenient synthetic route to SCT and its derivatives, where a structurally symmetric 3,3'-dibromo-5,5'-bis(trimethylsilyl)-2,2'-bithiophene (2) serves as the precursor for both the synthesis of 4H-cyclopenta[2,1-b:3,4-b']dithiophen-4-one (4) and 4-(5,5'-bis(trimethylsilyl)-2,2'-bithiophen-3-yl)-2,6-bis(trimethylsilyl)-4-hydroxy-cyclopenta[2,1-b;3,4-b']dithiophene (5). The later one is the key intermediate for the final brominated SCT building block. Such a "two birds with one stone" strategy simplifies the synthetic approach to the SCT core. Functionalization on the SCT core with different terminal electron-deficient groups, including 1H-indene-1,3(2H)-dione (ID), 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC), and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (FIC), was carried out, yielding three spiro-conjugated A-D-A type molecules, SCT-(TID)4, SCT-(TIC)4, SCT-(TFIC)4, respectively. The optical spectroscopy and electrochemical properties of these three compounds were investigated and compared to the corresponding linear oligomers. Results revealed that the IC and TFIC terminated compounds showed low-lying HOMO/LUMO energy levels with reduced optical bandgap, making them more suitable for use in polymer solar cells. A power conversion efficiency of 3.73% was achieved for the SCT-(TFIC)4 based cell, demonstrating the application perspective of 3D molecules.
ABSTRACT
Electrochromic devices can modulate their light absorption under a small driving voltage, but the requirement for external electrical supplies causes response-lag. To address this problem, self-powered electrochromic devices have been studied recently. However, insensitivity to the surrounding light and unsatisfactory stability of electrochromic devices have hindered their critical applications. Herein, novel perovskite solar cell-powered all-in-one gel electrochromic devices have been assembled and studied in order to achieve automatic light adjustment. Two alkynyl-containing viologen derivatives are synthesized as electrochromic materials, the devices with very high stability (up to 70000 cycles) serves as the energy storage and smart window, while the perovskite solar cell with power-conversion-efficiency up to 18.3% serves as the light detector and power harvester. The combined devices can automatically switch between bleached and colored state to adjust light absorption with variable surrounding light intensity in real-time swiftly, which establish significant potentials for applications as modern all-day intelligent windows.
ABSTRACT
Side-chain polymers have the potential to be excellent dopant-free hole-transporting materials (HTMs) for perovskite solar cells (PSCs) because of their unique characteristics, such as tunable energy levels, high charge mobility, good solubility, and excellent film-forming ability. However, there has been less research focusing on side-chain polymers for PSCs. Here, two side-chain polystyrenes with triphenylamine substituents on carbazole moieties were designed and characterized. The properties of the side-chain polymers were tuned finely, including the photophysical and electrochemical properties and charge mobilities, by changing the positions of triphenylamine substituents on carbazole. Owing to the higher mobility and charge extraction ability, the polymer P2 with the triphenylamine substituent on the 3,6-positions of the carbazole unit showed higher performance with power conversion efficiency (PCE) of 18.45%, which was much higher than the PCE (16.78%) of P1 with 2,7-positions substituted. These results clearly demonstrated that side-chain polymers can act as promising HTMs for PSC applications and the performance of side-chain polymers could be optimized by carefully tuning the structure of the monomer, which provides a new strategy to design new kinds of side-chain polymers and obtain high-performance dopant-free HTMs.
