Facet-Dependent Surface Restructuring on Nickel (Oxy)hydroxides: A Self-Activation Process for Enhanced Oxygen Evolution Reaction.

Unraveling the catalyst surface structure and behavior during reactions is essential for both mechanistic understanding and performance optimization. Here we report a phenomenon of facet-dependent surface restructuring intrinsic to ß-Ni(OH)2 catalysts during oxygen evolution reaction (OER), discovered by the correlative ex situ and operando characterization. The ex situ study after OER reveals ß-Ni(OH)2 restructuring at the edge facets to form nanoporous Ni1-xO, which is Ni deficient containing Ni3+ species. Operando liquid transmission electron microscopy (TEM) and Raman spectroscopy further identify the active role of the intermediate ß-NiOOH phase in both the OER catalysis and Ni1-xO formation, pinpointing the complete surface restructuring pathway. Such surface restructuring is shown to effectively increase the exposed active sites, accelerate Ni oxidation kinetics, and optimize *OH intermediate bonding energy toward fast OER kinetics, which leads to an extraordinary activity enhancement of ∼16-fold. Facilitated by such a self-activation process, the specially prepared ß-Ni(OH)2 with larger edge facets exhibits a 470-fold current enhancement than that of the benchmark IrO2, demonstrating a promising way to optimize metal-(oxy)hydroxide-based catalysts.

Synthesis of core@shell catalysts guided by Tammann temperature.

Designing high-performance thermal catalysts with stable catalytic sites is an important challenge. Conventional wisdom holds that strong metal-support interactions can benefit the catalyst performance, but there is a knowledge gap in generalizing this effect across different metals. Here, we have successfully developed a generalizable strong metal-support interaction strategy guided by Tammann temperatures of materials, enabling functional oxide encapsulation of transition metal nanocatalysts. As an illustrative example, Co@BaAl2O4 core@shell is synthesized and tracked in real-time through in-situ microscopy and spectroscopy, revealing an unconventional strong metal-support interaction encapsulation mechanism. Notably, Co@BaAl2O4 exhibits exceptional activity relative to previously reported core@shell catalysts, displaying excellent long-term stability during high-temperature chemical reactions and overcoming the durability and reusability limitations of conventional supported catalysts. This pioneering design and widely applicable approach has been validated to guide the encapsulation of various transition metal nanoparticles for environmental tolerance functionalities, offering great potential to advance energy, catalysis, and environmental fields.

Hollow-Carbon Confinement Annealing: A New Synthetic Approach to Make High-Entropy Solid-Solution and Intermetallic Nanoparticles.

High-entropy alloy (HEA) nanoparticles (NPs) have been emerging with superior compositional tunability and multielemental synergy, presenting a unique platform for material discovery and performance optimization. Here we report a synthetic approach utilizing hollow-carbon confinement in the ordinary furnace annealing to achieve the nonequilibrium HEA-NPs such as Pt0.45Fe0.18Co0.12Ni0.15Mn0.10 with uniform size ∼5.9 nm. The facile temperature control allows us not only to reveal the detailed reaction pathway through ex situ characterization but also to tailor the HEA-NP structure from the crystalline solid solution to intermetallic. The preconfinement of metal precursors is the key to ensure the uniform distribution of metal nanoparticles with confined volume, which is essential to prevent the thermodynamically favored phase separation even during the ordinary furnace annealing. Besides, the synthesized HEA-NPs exhibit remarkable activity and stability in oxygen reduction catalysis. The demonstrated synthetic approach may significantly expand the scope of HEA-NPs with uncharted composition and performance.

In situ X-ray spectroscopies beyond conventional X-ray absorption spectroscopy on deciphering dynamic configuration of electrocatalysts.

Realizing viable electrocatalytic processes for energy conversion/storage strongly relies on an atomic-level understanding of dynamic configurations on catalyst-electrolyte interface. X-ray absorption spectroscopy (XAS) has become an indispensable tool to in situ investigate dynamic natures of electrocatalysts but still suffers from limited energy resolution, leading to significant electronic transitions poorly resolved. Herein, we highlight advanced X-ray spectroscopies beyond conventional XAS, with emphasis on their unprecedented capabilities of deciphering key configurations of electrocatalysts. The profound complementarities of X-ray spectroscopies from various aspects are established in a probing energy-dependent "in situ spectroscopy map" for comprehensively understanding the solid-liquid interface. This perspective establishes an indispensable in situ research model for future studies and offers exciting research prospects for scientists and spectroscopists.

Highly defective graphene quantum dots-doped 1T/2H-MoS2 as an efficient composite catalyst for the hydrogen evolution reaction.

We present a new composite catalyst system of highly defective graphene quantum dots (HDGQDs)-doped 1T/2H-MoS2 for efficient hydrogen evolution reactions (HER). The high electrocatalytic activity, represented by an overpotential of 136.9 mV and a Tafel slope of 57.1 mV/decade, is due to improved conductivity, a larger number of active sites in 1T-MoS2 compared to that in 2H-MoS2, and additional defects introduced by HDGQDs. High-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, x-ray diffraction (XRD) and x-ray photoelectron spectroscopy (XPS) were used to characterize both the 1T/2H-MoS2 and GQDs components while Fourier-transform infrared spectroscopy (FTIR) was employed to identify the functional groups on the edge and defect sites in the HDGQDs. The morphology of the composite catalyst was also examined by field emission scanning electron microscopy (FESEM). All experimental data demonstrated that each component contributes unique advantages that synergistically lead to the significantly improved electrocatalytic activity for HER in the composite catalyst system.

Photo-Induced Active Lewis Acid-Base Pairs in a Metal-Organic Framework for H2 Activation.

The establishment of active sites as the frustrated Lewis pair (FLP) has recently attracted much attention ranging from homogeneous to heterogeneous systems in the field of catalysis. Their unquenched reactivity of Lewis acid and base pairs in close proximity that are unable to form stable adducts has been shown to activate small molecules such as dihydrogen heterolytically. Herein, we show that grafted Ru metal-organic framework-based catalysts prepared via N-containing linkers are rather catalytically inactive for H2 activation despite the application of elevated temperatures. However, upon light illumination, charge polarization of the anchored Ru bipyridine complex can form a transient Lewis acid-base pair, Ru+-N- via metal-to-ligand charge transfer, as confirmed by time-dependent density functional theory (TDDFT) calculations to carry out effective H2-D2 exchange. FTIR and 2-D NMR endorse the formation of such reactive intermediate(s) upon light irradiation.

Confined Ru Sites in a 13X Zeolite for Ultrahigh H2 Production from NH3 Decomposition.

Catalytic NH3 synthesis and decomposition offer a new promising way to store and transport renewable energy in the form of NH3 from remote or offshore sites to industrial plants. To use NH3 as a hydrogen carrier, it is important to understand the catalytic functionality of NH3 decomposition reactions at an atomic level. Here, we report for the first time that Ru species confined in a 13X zeolite cavity display the highest specific catalytic activity of over 4000 h-1 for the NH3 decomposition with a lower activation barrier, compared to most reported catalytic materials in the literature. Mechanistic and modeling studies clearly indicate that the N-H bond of NH3 is ruptured heterolytically by the frustrated Lewis pair of Ruδ+-Oδ- in the zeolite identified by synchrotron X-rays and neutron powder diffraction with Rietveld refinement as well as other characterization techniques including solid-state nuclear magnetic resonance spectroscopy, in situ diffuse reflectance infrared transform spectroscopy, and temperature-programmed analysis. This contrasts with the homolytic cleavage of N-H displayed by metal nanoparticles. Our work reveals the unprecedented unique behavior of cooperative frustrated Lewis pairs created by the metal species on the internal zeolite surface, resulting in a dynamic hydrogen shuttling from NH3 to regenerate framework Brønsted acid sites that eventually are converted to molecular hydrogen.

Cu-Co Dual-Atom Catalysts Supported on Hierarchical USY Zeolites for an Efficient Cross-Dehydrogenative C(sp2)-N Coupling Reaction.

A cross-coupling reaction via the dehydrogenative route over heterogeneous solid atomic catalysts offers practical solutions toward an economical and sustainable elaboration of simple organic substrates. The current utilization of this technology is, however, hampered by limited molecular definition of many solid catalysts. Here, we report the development of Cu-M dual-atom catalysts (where M = Co, Ni, Cu, and Zn) supported on a hierarchical USY zeolite to mediate efficient dehydrogenative cross-coupling of unprotected phenols with amine partners. Over 80% isolated yields have been attained over Cu-Co-USY, which shows much superior reactivity when compared with our Cu1 and other Cu-M analogues. This amination reaction has hence involved simple and non-forceful reaction condition requirements. The superior reactivity can be attributed to (1) the specifically designed bimetallic Cu-Co active sites within the micropore for "co-adsorption-co-activation" of the reaction substrates and (2) the facile intracrystalline (meso/micropore) diffusion of the heterocyclic organic substrates. This study offers critical insights into the engineering of next-generation solid atomic catalysts with complex reaction steps.

General Strategy toward Hydrophilic Single Atom Catalysts for Efficient Selective Hydrogenation.

Well dispersible and stable single atom catalysts (SACs) with hydrophilic features are highly desirable for selective hydrogenation reactions in hydrophilic solvents towards important chemicals and pharmaceutical intermediates. A general strategy is reported for the fabrication of hydrophilic SACs by cation-exchange approach. The cation-exchange between metal ions (M = Ni, Fe, Co, Cu) and Na+ ions introduced in the skeleton of metal oxide (TiO2 or ZrO2 ) nanoshells plays the key role in forming M1 /TiO2 and M1 /ZrO2 SACs, which efficiently prevents the aggregation of the exchanged metal ions. The as-obtained SACs are highly dispersible and stable in hydrophilic solvents including alcohol and water, which greatly facilitates the catalysis reaction in alcohol. The Ni1 /TiO2 SACs have been successfully utilized as catalysts for the selective C=C hydrogenation of cinnamaldehyde to produce phenylpropanal with 98% conversion, over 90% selectivity, good recyclability, and a turnover frequency (TOF) of 102 h-1 , overwhelming most reported catalysts including noble metal catalysts.

Single-Atom Molybdenum-N3 Sites for Selective Hydrogenation of CO2 to CO.

The design of efficient non-noble metal catalysts for CO2 hydrogenation to fuels and chemicals is desired yet remains a challenge. Herein, we report that single Mo atoms with a MoN3 (pyrrolic) moiety enable remarkable CO2 adsorption and hydrogenation to CO, as predicted by density functional theory studies and evidenced by a high and stable conversion of CO2 reaching about 30.4 % with a CO selectivity of almost 100 % at 500 °C and very low H2 partial pressure. Atomically dispersed MoN3 is calculated to facilitate CO2 activation and reduces CO2 to CO* via the direct dissociation path. Furthermore, the highest transition state energy in CO formation is 0.82 eV, which is substantially lower than that of CH4 formation (2.16 eV) and accounts for the dominant yield of CO. The enhanced catalytic performances of Mo/NC originate from facile CO desorption with the help of dispersed Mo on nitrogen-doped carbon (Mo/NC), and in the absence of Mo nanoparticles. The resulting catalyst preserves good stability without degradation of CO2 conversion rate even after 68 hours of continuous reaction. This finding provides a promising route for the construction of highly active, selective, and robust single-atom non-precious metal catalysts for reverse water-gas shift reaction.

Visualization and (Semi-)quantification of submicrometer plastics through scanning electron microscopy and time-of-flight secondary ion mass spectrometry.

Increasing numbers of studies have demonstrated the existence of nanoplastics (1-999 nm) in the environment and commercial products, but the current technologies for detecting and quantifying nanoplastics are still developing. Herein, we present a combination of two techniques, e.g., scanning electron microscopy (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), to analyze submicron-sized plastics. A drop-casting of a 20-nL particle suspension on a Piranha solution-cleaned silicon wafer with dry ice incubation and subsequent freeze-drying was used to suppress the coffee-ring effect. SEM images were used to quantify particles, and this technique is applicable for 0.195-1.04-µm polystyrene (PS), 0.311-µm polyethylene terephthalate (PET), and 0.344-µm polyethylene (PE) at a minimum concentration of 2.49 × 109 particles/mL. ToF-SIMS could not quantify the particle number, while it could semi-quantitatively estimate number ratios of submicron PE, PET, polyvinyl chloride (PVC), and PS particles in the mixture. Analysis of submicron plastics released from three hot water-steeped teabags (respectively made of PET/PE, polylactic acid (PLA), and PET) was revisited. The SEM-derived sizes and particle numbers were comparable to those measured by a nanoparticle tracking analysis (NTA) regardless of whether or not the hydro-soluble oligomers were removed. ToF-SIMS further confirmed the number ratios of different particles from a PET/PE composite teabag leachate. This method shows potential for application in analyzing more-complex plastic particles released from food contact materials.

Formation of Co-O bonds and reversal of thermal annealing effects induced by X-ray irradiation in (Y, Co)-codoped CeO2 nanocrystals.

We report an unconventional effect of synchrotron X-ray irradiation in which Co-O bonds in thermally annealed (Y, Co)-codoped CeO2 nanocrystal samples were formed due to, instead of broken by, X-ray irradiation. Our experimental data indicate that escaping oxygen atoms from X-ray-broken Ce-O bonds may be captured by Co dopant atoms to form additional Co-O bonds. Consequently, the Co dopant atoms were pumped by X-rays from the energetically-favored thermally-stable Co-O4 square-planar structure to the metastable octahedral Co-O6 environment, practically a reversal of thermal annealing effects in (Y, Co)-codoped CeO2 nanocrystals. The band gap of doped CeO2 with Co dopant in the Co-O6 structure was previously found to be 1.61 eV higher than that with Co in the Co-O4 environment. Therefore, X-ray irradiation can work with thermal annealing in opposing directions to fine tune and optimize the band gap of the material for specific technological applications.

Extraction method development for nanoplastics from oyster and fish tissues.

Nanoplastics are now found in some environmental media and consumer products. However, very limited data on nanoplastics are available for one of the main human consumption sources of microplastics: seafood. Unlike microplastics, a method for extracting nanoplastics from seafood is still lacking. Herein, a combination of common extraction techniques including enzymatic digestion, sequential membrane filtration, centrifugal concentration, and purification (dialysis and sodium dodecylsulfate (SDS) incubation), was developed to extract nanoplastics from oyster and fish tissues. Corolase with subsequent lipase treatment achieved the highest digestion efficiencies (88- 89%) for non-homogenized tissues compared to other proteases and additional cellulase or H2O2 treatment. With the exception of polyethylene terephthalate (PET), enzymatic digestion did not change the morphology or structure of polyvinyl chloride (PVC), polyethylene (PE), or polystyrene (PS) nanoplastic particles, and the subsequent extraction procedures had good recoveries of 71- 110% for fluorescence-labeled 76-nm PVC and 100- and 750-nm PS, as validated by a Nanoparticle Tracking Analysis (NTA). Few of the 1011 digested residual particles of 150- 300 nm in diameter per oyster or per serving of fish tissue were left in the method blank. Consequently, this efficient approach could be used as a pretreatment protocol for current potential nanoplastic detection methods.

Cluster Nanozymes with Optimized Reactivity and Utilization of Active Sites for Effective Peroxidase (and Oxidase) Mimicking.

Single-atom catalysts have attracted attention in the past decade since they maximize the utilization of active sites and facilitate the understanding of product distribution in some catalytic reactions. Recently, this idea has been extended to single-atom nanozymes (SAzymes) for the mimicking of natural enzymes such as horseradish peroxidase (HRP) often used in bioanalytical applications. Herein, it is demonstrated that those SAzymes without constructing the reaction pocket of HRP still undergo the OH radical-mediated pathway like most of the reported nanozymes. Their positively charged single-atom centers resulting from support electronegative oxygen/nitrogen hinder the reductive conversion of H2 O2 to OH radicals and hence display low activity per site. In contrast, it is found that this step can be facilitated over their metallic counterparts on cluster nanozymes with much higher site activity and atom efficiency (cf. SAzymes with 100% atom utilization). Besides the mimicking of HRP in glucose detection, cluster nanozymes are also demonstrated as a better oxidase mimetic for glutathione detection.

Visualizing Ferroelectric Uniformity of Hf1-xZrxO2 Films Using X-ray Mapping.

Hf1-xZrxO2 (HZO) is a complementary metal-oxide-semiconductor (CMOS)-compatible ferroelectric (FE) material with considerable potential for negative capacitance field-effect transistors, ferroelectric memory, and capacitors. At present, however, the deployment of HZO in CMOS integrated circuit (IC) technologies has stalled due to issues related to FE uniformity. Spatially mapping the FE distribution is one approach to facilitating the optimization of HZO thin films. This paper presents a novel technique based on synchrotron X-ray nanobeam absorption spectroscopy capable of mapping the three main phases of HZO (i.e., orthorhombic (O), tetragonal (T), and monoclinic (M)). The practical value of the proposed methodology when implemented in conjunction with kinetic-nucleation modeling is demonstrated by our development of a T → O annealing (TOA) process to optimize HZO films. This process produces an HZO film with the largest polarization values (Ps = 64.5 µC cm-2; Pr = 35.17 µC cm-2) so far, which can be attributed to M-phase suppression followed by low-temperature annealing for the induction of a T → O phase transition.

Rapid Interchangeable Hydrogen, Hydride, and Proton Species at the Interface of Transition Metal Atom on Oxide Surface.

Hydrogen spillover is the phenomenon where a hydrogen atom, generated from the dissociative chemisorption of dihydrogen on the surface of a metal species, migrates from the metal to the catalytic support. This phenomenon is regarded as a promising avenue for hydrogen storage, yet the atomic mechanism for how the hydrogen atom can be transferred to the support has remained controversial for decades. As a result, the development of catalytic support for such a purpose is only limited to typical reducible oxide materials. Herein, by using a combination of in situ spectroscopic and imaging technique, we are able to visualize and observe the atomic pathway for which hydrogen travels via a frustrated Lewis pair that has been constructed on a nonreducible metal oxide. The interchangeable status between the hydrogen, proton, and hydride is carefully characterized and demonstrated. It is envisaged that this study has opened up new design criteria for hydrogen storage material.

High Loading of Transition Metal Single Atoms on Chalcogenide Catalysts.

Transition metal doped chalcogenides are one of the most important classes of catalysts that have been attracting increasing attention for petrochemical and energy related chemical transformations due to their unique physiochemical properties. For practical applications, achieving maximum atom utilization by homogeneous dispersion of metals on the surface of chalcogenides is essential. Herein, we report a detailed study of a deposition method using thiourea coordinated transition metal complexes. This method allows the preparation of a library of a wide range of single atoms including both noble and non-noble transition metals (Fe, Co, Ni, Cu, Pt, Pd, Ru) with a metal loading as high as 10 wt % on various ultrathin 2D chalcogenides (MoS2, MoSe2, WS2 and WSe2). As demonstrated by the state-of-the-art characterization, the doped single transition metal atoms interact strongly with surface anions and anion vacancies in the exfoliated 2D materials, leading to high metal dispersion in the absence of agglomeration. Taking Fe on MoS2 as a benchmark, it has been found that Fe is atomically dispersed until 10 wt %, and beyond this loading, formation of coplanar Fe clusters is evident. Atomic Fe, with a high electron density at its conduction band, exhibits a superior intrinsic activity and stability in CO2 hydrogenation to CO per Fe compared to corresponding surface Fe clusters and other Fe catalysts reported for reverse water-gas-shift reactions.

Reduction of dopant ions and enhancement of magnetic properties by UV irradiation in Ce-doped TiO2.

We report the experimental observation of and theoretical explanation for the reduction of dopant ions and enhancement of magnetic properties in Ce-doped TiO2 diluted magnetic semiconductors from UV-light irradiation. Substantial increase in Ce3+ concentration and creation of oxygen vacancy defects in the sample due to UV-light irradiation was observed by X-ray and optical methods. Magnetic measurements demonstrate a combination of paramagnetism and ferromagnetism up to room temperatures in all samples. The magnetization of both paramagnetic and ferromagnetic components was observed to be dramatically enhanced in the irradiated sample. First-principle theoretical calculations show that valence holes created by UV irradiation can substantially lower the formation energy of oxygen vacancies. While the electron spin densities for defect states near oxygen vacancies in pure TiO2 are in antiferromagnetic orientation, they are in ferromagnetic orientations in Ce-doped TiO2. Therefore, the ferromagnetically-oriented spin densities near oxygen vacancies created by UV irradiation are the most probable cause for the experimentally observed enhancement of magnetism in the irradiated Ce-doped TiO2.

Controlled synthesis of Bi- and tri-nuclear Cu-oxo nanoclusters on metal-organic frameworks and the structure-reactivity correlations.

Precisely tuning the nuclearity of supported metal nanoclusters is pivotal for designing more superior catalytic systems, but it remains practically challenging. By utilising the chemical and molecular specificity of UiO-66-NH2 (a Zr-based metal-organic framework), we report the controlled synthesis of supported bi- and trinuclear Cu-oxo nanoclusters on the Zr6O4 nodal centres of UiO-66-NH2. We revealed the interplay between the surface structures of the active sites, adsorption configurations, catalytic reactivities and associated reaction energetics of structurally related Cu-based 'single atoms' and bi- and trinuclear species over our model photocatalytic formic acid reforming reaction. This work will offer practical insight that fills the critical knowledge gap in the design and engineering of new-generation atomic and nanocluster catalysts. The precise control of the structure and surface sensitivities is important as it can effectively lead to more reactive and selective catalytic systems. The supported bi- and trinuclear Cu-oxo nanoclusters exhibit notably different catalytic properties compared with the mononuclear 'Cu1' analogue, which provides critical insight for the engineering of more superior catalytic systems.