ABSTRACT
Multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters hold promise for efficient organic light-emitting diodes (OLEDs) and wide gamut displays. An azepine donor is introduced into the boron-nitrogen system for the first time. The highly twisted conformation of a seven-ring embedded new molecule, TAzBN, increases the intermolecular distances, suppressing self-aggregation emission quenching. Meanwhile, the azepine donor is crucial to achieve a narrow singlet-triplet gap (0.03 eV) as well as boost the reverse intersystem crossing (RISC) rate to 8.50 × 105 s-1. It is noteworthy that TAzBN demonstrates an impressive photoluminescence quantum yield of 94%. In addition, its nonsensitized OLED displayed a remarkable external quantum efficiency (EQEmax) with values peaking at 27.3%, and an EQE of 21.4% at 500 cd m-2. This finding shows that when TAzBN is used at a high concentration of 10 wt%, its device maintains efficiency even at higher brightness levels, highlighting TAzBN's resistance to aggregation quenching. Furthermore, TAzBN enantiomers showed circularly polarized photoluminescence characteristics with dissymmetry factors |g PL| of up to 1.07 × 10-3 in doped films. The curved heptagonal geometry opens an avenue to design the MR-TADF emitters with fast spin-flip and chiroptical properties.
ABSTRACT
This work reports an efficient synthesis of novel benzo[7,8]indolizino[2,3,4,5-ija]quinazoline derivatives between 2-(2-ethynylaryl)acetonitriles 1 and anthranils 2. The synthetic approach involves the initial formation of 7-formylindole intermediates that can be implemented by DBU to activate a novel indole-nitrile-aldehyde cyclization.
ABSTRACT
Converting solar energy into hydrogen energy using conjugated polymers (CP) is a promising solution to the energy crisis. Improving water solubility plays one of the critical factors in enhancing the hydrogen evolution rate (HER) of CP photocatalysts. In this study, a novel concept of incorporating hydrophilic side chains to connect the backbones of CPs to improve their HER is proposed. This concept is realized through the polymerization of carbazole units bridged with octane, ethylene glycol, and penta-(ethylene glycol) to form three new side-chain-braided (SCB) CPs: PCz2S-OCt, PCz2S-EG, and PCz2S-PEG. Verified through transient absorption spectra, the enhanced capability of PCz2S-PEG for ultrafast electron transfer and reduced recombination effects has been demonstrated. Small- and wide-angle X-ray scattering (SAXS/WAXS) analyses reveal that these three SCB-CPs form cross-linking networks with different mass fractal dimensions (f) in aqueous solution. With the lowest f value of 2.64 and improved water/polymer interfaces, PCz2S-PEG demonstrates the best HER, reaching up to 126.9 µmol h-1 in pure water-based photocatalytic solution. Moreover, PCz2S-PEG exhibits comparable performance in seawater-based photocatalytic solution under natural sunlight. In situ SAXS analysis further reveals nucleation-dominated generation of hydrogen nanoclusters with a size of ≈1.5 nm in the HER of PCz2S-PEG under light illumination.
ABSTRACT
Circularly polarized luminescence (CPL) materials are promising candidates for future display technology. However, such highly efficient emitters suffer from the issues of difficult chiral separation and low photoluminescence quantum yield (PLQY). In this work, the chiral 4,4'-biphenanthrene-3,3'-diol (BIPOL) unit was introduced into a thermally activated delayed fluorescence (TADF) framework for the first time. We presented two series of enantiomers, R/S-o-DCzBPNCN and R/S-p-DCzBPNCN, and the synthesis of enantiopure BIPOL can be prepared via normal column chromatography. Notably, o-DCzBPNCN showed narrow singlet-triplet gap of 0.05â eV, efficient TADF, and high PLQYs of 82 % in doped films. In addition, R/S-o-DCzBPNCN exhibited high luminescence dissymmetry factor (gPL ) values of -1.94×10-2 /+1.91×10-2 in doped films. The strategy of BIPOL introduction offers a new approach to organic emitters with stereospecific synthesis, TADF, and chiroptical properties.
ABSTRACT
The strategy of acceptor modification is a powerful technique for tuning the emission color of thermally activated delayed fluorescence (TADF) emitters. In this study, we have successfully designed and synthesized three TADF emitters with donor-acceptor (D-A) structures using a 4-(diphenylamino)-2,6-dimethylphenyl (TPAm) donor and various pyridine-3,5-dicarbonitrile (PC) acceptor units. As a result, three compounds named TPAmbPPC, TPAm2NPC, and TPAmCPPC exhibited greenish-yellow to orange-red emissions with high photoluminescent quantum yields (76-100%) in thin films. Remarkably, a greenish-yellow device based on TPAmbPPC and TPAm2NPC showed a high maximum external quantum efficiency (EQEmax) of 39.1 and 39.0%, respectively. Furthermore, benefiting from the suitable steric hindrance between the acceptor and donor, the nondoped organic light-emitting diodes (OLEDs) based on TPAmbPPC demonstrated an exceptional EQEmax of 21.6%, indicating its promising potential as an efficient emitter for the application of OLED applications. Furthermore, orange-red OLED devices based on TPAmCPPC exhibited a high EQEmax of 26.2%, a CE of 50.1 cd A-1, and a PE of 52.4 lm W-1.
ABSTRACT
Owing to the high technology maturity of thermally activated delayed fluorescence (TADF) emitter design with a specific molecular shape, extremely high-performance organic light-emitting diodes (OLEDs) have recently been achieved via various doping techniques. Recently, undoped OLEDs have drawn immense attention because of their manufacturing cost reduction and procedure simplification. However, capable materials as host emitters are rare and precious because general fluorophores in high-concentration states suffer from serious aggregation-caused quenching (ACQ) and undergo exciton quenching. In this work, a series of diboron materials, CzDBA, iCzDBA, and tBuCzDBA, is introduced to realize the effect of steric hindrance and the molecular aspect ratio via experimental and theoretical studies. We computed transition electric dipole moment (TEDM) and molecular dynamics (MD) simulations as a proof-of-concept model to investigate the molecular stacking in neat films. It is worth noting that the pure tBuCzDBA film with a high horizontal ratio of 92% is employed to achieve a nondoped OLED with an excellent external quantum efficiency of 26.9%. In addition, we demonstrated the first ultrathin emitting layer (1 nm) TADF device, which exhibited outstanding power efficiency. This molecular design and high-performance devices show the potential of power-saving and economical fabrication for advanced OLEDs.
ABSTRACT
Highly efficient thermally activated delayed fluorescence (TADF) molecules are in urgent demand for solid-state lighting and full-color displays. Here, the design and synthesis of three triarylamine-pyridine-carbonitrile-based TADF compounds, TPAPPC, TPAmPPC, and tTPAmPPC, are shown. They exhibit excellent photoluminescence quantum yields of 79-100% with small ΔEST values, fast reverse intersystem crossing (RISC), and high horizontal dipole ratios (Θ// = 86-88%) in the thin films leading to the enhancement of device light outcoupling. Consequently, a green organic light-emitting diode (OLED) based on TPAmPPC shows a high average external quantum efficiency of 38.8 ± 0.6%, a current efficiency of 130.1 ± 2.1 cd A-1 , and a power efficiency of 136.3 ± 2.2 lm W-1 . The highest device efficiency of 39.8% appears to be record-breaking among TADF-based OLEDs to date. In addition, the TPAmPPC-based device shows superior operation lifetime and high-temperature resistance. It is worth noting that the TPA-PPC-based materials have excellent optical properties and the potential for making them strong candidates for TADF practical application.
ABSTRACT
For the application of organic light-emitting diodes (OLEDs) in lighting and panels, the basic requirement is to include a full spectrum color range. Compared with the development of blue and green luminophores in thermally activated delayed fluorescence (TADF) technology, the progress of orange-to-red materials is slow and needs further investigation. In this study, three diboron compound-based materials, dPhADBA, dmAcDBA, and SpAcDBA, were designed and synthesized by nucleophilic arylation of three amine donors on 9,10-diboraanthracene (DBA) in a two-step reaction. With increasing electron-donating ability, they show orange-to-red emission with TADF characteristics. The electroluminescence of these diboron compounds exhibits emissions λmax at 613, 583, and 567 nm for dPhADBA, dmAcDBA, and SpAcDBA, respectively. It is noteworthy that the rod-like D-A-D structures can achieve high horizontal ratios (84-86%) and outstanding device performance for orange-to-red TADF OLEDs: the highest external quantum efficiencies for dPhADBA, dmAcDBA, and SpAcDBA are 11.1 ± 0.5, 24.9 ± 0.5, and 30.0 ± 0.8%, respectively. Therefore, these diboron-based molecules offer a promising avenue for the design of orange-to-red TADF emitters and the development of highly efficient orange-to-red OLEDs.
ABSTRACT
Exciplex emitters have emerged as an important class of thermally activated delayed fluorescence (TADF) materials for highly efficient OLEDs. A TADF exciplex emitter requires an intermolecular donor/acceptor pair. We have synthesized a bipolar donor-type material, DPSTPA, which was used to pair with known acceptor materials (2CzPN, 4CzIPN, or CzDBA). The OLEDs based on the exciplex emitters, DPSTPA/X, where X = 2CzPN and CzDBA, give green and orange-red colors with record-high external quantum efficiencies (EQEs) of 19.0 ± 0.6 and 14.6 ± 0.4%, respectively. In contrast, the exciplex pair DPSTPA/4CzIPN gave a very low photoluminescence quantum yield (PLQY) and a very low EQE value of the device. The DFT calculations indicate that the intermolecular distance between the donor and the acceptor plays a key factor for the PLQY and EQE. The observed low PLQY and the poor device performance for the DPSTPA/4CzIPN pair are probably because of the relatively long distance between the DPSTPA and 4CzIPN in the thin film caused by the four congested carbazole (Cz) groups of 4CzIPN, which effectively block the interaction of the nitrile acceptor with the triphenylamino donor of DPSTPA.
ABSTRACT
Three pyridine-carbonitrile-carbazole-based thermally activated delayed fluorescence (TADF) materials with highly sterically congested structures have been synthesized. The donor-acceptor-type TADF emitters (26-, 246-, and 35tCzPPC) consist of a 2,6-diphenylpyridine-3,5-dicarbonitrile core (PPC) as the acceptor and a di( t-butyl)carbazole-substituted phenyl group attached to C4 of the PC core as the donor. The molecules show a unique structure containing two consecutive large twisted angles along the donor and acceptor groups. The structure leads to a nearly complete space separation of the highest occupied molecular orbital and lowest unoccupied molecular orbital, a small Δ EST value, and excellent TADF property. Moreover, the 26- and 246tCzPPC dopants favor a horizontal alignment enhancing the light outcoupling of the device. In contrast, 35tCzPPC favors a perpendicular alignment reducing the light outcoupling efficiency of the device. The 246tCzPPC-based devices show external quantum efficiency as high as 29.6% because of excellent TADF property, very high photoluminescence quantum yield, and high Θ value in the thin films. The device performance is the best among the pyridine-carbonitrile-based TADF emitters.
ABSTRACT
Five emitters CzAZB, tBuCzAZB, tmCzAZB, dmAcAZB, and PxzAZB based on dibenzo-1,4-azaborine as the electron acceptors and two identical amine groups as the donors were designed and synthesized. The dihedral angles between the planes of dibenzo-1,4-azaborine acceptors and amine-based donors greatly affect the thermally activated delayed fluorescence (TADF) property of these materials. A simple concept "steric switching" is introduced to predict whether the emitter possesses TADF property. CzAZB and tBuCzAZB, with very high photoluminescence quantum yields (PLQYs) but small dihedral angles, do not show TADF. In contrast, tmCzAZB reveals a PLQY of only 56% but with a large dihedral angle due to the presence of two methyl groups at C1 and C8 of the carbazole groups, the steric switching operates, and the compound shows TADF property with a deep-blue color having CIE coordinates of (0.14, 0.15). In a similar manner, in dmAcAZB and PxzAZB with high PLQYs and large dihedral angles between the donor and acceptor planes, the "TADF steric switch" readily operates to achieve device external quantum efficiencies as high as 20.8 ± 1.2 and 27.5 ± 1.9% with blue and green emissions, respectively.
ABSTRACT
In this study, a novel perovskite quantum dot (QD) spray-synthesis method is developed by combining traditional perovskite QD synthesis with the technique of spray pyrolysis. By utilizing this new technique, the synthesis of cubic-shaped perovskite QDs with a homogeneous size of 14 nm is demonstrated, which shows an unprecedented stable absolute photoluminescence quantum yield ≈100% in the solution and even in the solid-state neat film. The highly emissive thin films are integrated with light emission devices (LEDs) and organic light emission displays (OLEDs). The color conversion type QD-LED (ccQD-LED) hybrid devices exhibit an extremely saturated green emission, excellent external quantum efficiency of 28.1%, power efficiency of 121 lm W-1 , and extraordinary forward-direction luminescence of 8 500 000 cd m-2 . The conceptual ccQD-OLED hybrid display also successfully demonstrates high-definition still images and moving pictures with a 119% National Television System Committee 1931 color gamut and 123% Digital Cinema Initiatives-P3 color gamut. These very-stable, ultra-bright perovskite QDs have the properties necessary for a variety of useful applications in optoelectronics.
ABSTRACT
Atomically thin two-dimensional (2D) materials have attracted increasing attention for optoelectronic applications in view of their compact, ultrathin, flexible, and superior photosensing characteristics. Yet, scalable growth of 2D heterostructures and the fabrication of integrable optoelectronic devices remain unaddressed. Here, we show a scalable formation of 2D stacks and the fabrication of phototransistor arrays, with each photosensing element made of a graphene-WS2 vertical heterojunction and individually addressable by a local top gate. The constituent layers in the heterojunction are grown using chemical vapor deposition in combination with sulfurization, providing a clean junction interface and processing scalability. The aluminum top gate possesses a self-limiting oxide around the gate structure, allowing for a self-aligned deposition of drain/source contacts to reduce the access (ungated) channel regions and to boost the device performance. The generated photocurrent, inherently restricted by the limited optical absorption cross section of 2D materials, can be enhanced by 2 orders of magnitude by top gating. The resulting photoresponsivity can reach 4.0 A/W under an illumination power density of 0.5 mW/cm2, and the dark current can be minimized to few picoamperes, yielding a low noise-equivalent power of 2.5 × 10-16 W/Hz1/2. Tailoring 2D heterostacks as well as the device architecture moves the applications of 2D-based optoelectronic devices one big step forward.
ABSTRACT
The hole-injection barrier between the anode and the hole-injection layer (HIL) is of critical importance to determine the device performance of organic light-emitting diodes (OLEDs). Here, we report on a record-high external quantum efficiency (EQE) (24.6% in green phosphorescence) of OLEDs fabricated on both rigid and flexible substrates, with the performance enhanced by the use of nearly defect-free and high-mobility boron-doped graphene as an effective anode and hexaazatriphenylene hexacarbonitrile as a new type of HIL. This new structure outperforms the existing graphene-based OLEDs, in which MoO3, AuCl3, or bis(trifluoromethanesulfonyl)amide are typically used as a doping source for the p-type graphene. The improvement of the OLED performance is attributed mainly to the appreciable increase of the hole conductivity in the nearly defect-free boron-doped monolayer graphene, along with the high work function achieved by the use of a newly developed hydrocarbon precursor containing boron in the graphene growth by chemical vapor deposition.
ABSTRACT
A short synthesis of unsubstituted chrysene is described to provide a cheap source of this compound. This chrysene was used to prepare 3,6,9,12-tetrabromochrysene, which was subsequently transformed into various 3,6,9,12-tetrasubstituted chrysenes bearing four aryl, alkynyl, or amino groups by means of the Suzuki, Sonogashira, or Buchwald-Hartwig coupling reaction, respectively. These substituents result in large bathochromic shifts in the chrysene absorption and emission spectra. These new chrysene derivatives show blue fluorescent emission (401-471 nm) with high quantum yields (0.44-0.87). DFT calculations on these chrysenes rationalize well the substituent effects on their HOMO and LUMO energy levels. One representative chrysene (6g) was used as a blue fluorescent emitter in an OLED device that showed an outstanding external quantum efficiency (η = 6.31%) with blue emission [CIE (x, y) = (0.13, 0.20)] and a low turn-on voltage (3.0 V).
ABSTRACT
Ongoing brain activity can be recorded as electroencephalograph (EEG) to discover the links between emotional states and brain activity. This study applied machine-learning algorithms to categorize EEG dynamics according to subject self-reported emotional states during music listening. A framework was proposed to optimize EEG-based emotion recognition by systematically 1) seeking emotion-specific EEG features and 2) exploring the efficacy of the classifiers. Support vector machine was employed to classify four emotional states (joy, anger, sadness, and pleasure) and obtained an averaged classification accuracy of 82.29% +/- 3.06% across 26 subjects. Further, this study identified 30 subject-independent features that were most relevant to emotional processing across subjects and explored the feasibility of using fewer electrodes to characterize the EEG dynamics during music listening. The identified features were primarily derived from electrodes placed near the frontal and the parietal lobes, consistent with many of the findings in the literature. This study might lead to a practical system for noninvasive assessment of the emotional states in practical or clinical applications.
Subject(s)
Electroencephalography/methods , Emotions/physiology , Evoked Potentials, Auditory/physiology , Music/psychology , Pattern Recognition, Automated/methods , Adult , Algorithms , Artificial Intelligence , Bayes Theorem , Electrodes , Female , Humans , Male , Signal Processing, Computer-AssistedABSTRACT
We report an efficient synthesis of dibenzo[a,m]rubicenes and tetrabenzo[a,f,r,m]rubicenes involving ICl-mediated benzannulation of 1,4-diphenyl-2,5-dialkynylbenzene 5 as the key step. Preliminary data on the photophysical properties of these new indeno-PAHs are reported.