ABSTRACT
Microplastics (MPs) with different physical-chemical properties are considered as vectors for the propagation of microbes in aquatic environments. It remains unclear how plastic types impact on the plastisphere and whether different MPs spread microbes more rapidly than natural materials in microbes across distinct water bodies as proposed previously. We used in-situ incubation to investigate the microbes attached on MPs of polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), versus that on two natural microcarriers (quartz sands and bamboo) during the travel from aquaculture ponds with impacted by fish farming to adjacent freshwater stream. The results showed that the microbial communities on the carriers were shaped not only by environmental conditions, which were primary determinants but also by carrier types. All the tested plastics did not carry more microbes than the natural carriers during the journey. The biofilm community composition on PVC is distinct from that on PE and PP MPs and natural carriers. The plastisphere of PE and PP kept microbial proportions as natural materials did but PVC retained less than nature materials. Bamboo carried more potential pathogens than plastic polymers and quartz. The results indicated that the communities of plastisphere is polymer-type dependent, and, compared with the natural materials, MPs did not show enhanced propagation of microbes, including pathogens, cross distinct environments.
Subject(s)
Aquaculture , Microbiota , Microplastics , Ponds , Ponds/microbiology , Rivers/microbiology , Rivers/chemistry , Biofilms , Water Pollutants, Chemical , Polyethylene/chemistry , Polyvinyl Chloride/chemistry , Sand/microbiology , Bacteria , Water MicrobiologyABSTRACT
Recent discoveries indicate that several insect larvae are capable of ingesting and biodegrading plastics rapidly and symbiotically, but the ecological adaptability of the larval gut microbiome to microplastics (MPs) remains unclear. Here, we described the gut microbiome assemblage and MP biodegradation of superworms (Zophobas atratus larvae) fed MPs of five major petroleum-based polymers (polyethylene, polypropylene, polystyrene, polyvinyl chloride, and polyethylene terephthalate) and antibiotics. The shift of molecular weight distribution, characteristic peaks of CâO, and metabolic intermediates of residual polymers in egested frass proved depolymerization and biodegradation of all MPs tested in the larval intestines, even under antibiotic suppression. Superworms showed a wide adaptation to the digestion of the five polymer MPs. Antibiotic suppression negatively influenced the survival rate and plastic depolymerization patterns. The larval gut microbiomes differed from those fed MPs and antibiotics, indicating that antibiotic supplementation substantially shaped the gut microbiome composition. The larval gut microbiomes fed MPs had higher network complexity and stability than those fed MPs and antibiotics, suggesting that the ecological robustness of the gut microbiomes ensured the functional adaptability of larvae to different MPs. In addition, Mantel's test indicated that the gut microbiome assemblage was obviously related to the polymer type, the plastic degradability, antibiotic stress, and larval survival rate. This finding provided novel insights into the self-adaptation of the gut microbiome of superworms in response to different MPs.
Subject(s)
Anti-Bacterial Agents , Gastrointestinal Microbiome , Microplastics , Animals , Gastrointestinal Microbiome/drug effects , Anti-Bacterial Agents/pharmacology , Larva/drug effects , Biodegradation, Environmental , PlasticsABSTRACT
The detrimental effects of plastics on aquatic organisms, including those of macroplastics, microplastics, and nanoplastics, have been well established. However, knowledge on the interaction between plastics and terrestrial insects is limited. To develop effective strategies for mitigating the impact of plastic pollution on terrestrial ecosystems, it is necessary to understand the toxicity effects and influencing factors of plastic ingestion by insects. An overview of current knowledge regarding plastic ingestion by terrestrial insects is provided in this Review, and the factors influencing this interaction are identified. The pathways through which insects interact with plastics, which can lead to plastic accumulation and microplastic transfer to higher trophic levels, are also discussed using an overview and a conceptual model. The diverse impacts of plastic exposure on insects are discussed, and the challenges in existing studies, such as a limited focus on certain plastic types, are identified. Further research on standardized methods for sampling and analysis is crucial for reliable research, and long-term monitoring is essential to assess plastic trends and ecological impacts in terrestrial ecosystems. The mechanisms underlying these effects need to be uncovered, and their potential long-term consequences for insect populations and ecosystems require evaluation.
Subject(s)
Insecta , Microplastics , Animals , Microplastics/toxicity , Insecta/drug effects , Plastics/toxicity , Ecosystem , Environmental MonitoringABSTRACT
The insect Tenebrio molitor exhibits ultrafast efficiency in biodegrading polystyrene (PS). However, the generation and fate of nanoplastics (NPs) in the intestine during plastic biodegradation remain unknown. In this study, we investigated the biodegradation of PS microplastics (MPs) mediated by T. molitor larvae over a 4-week period and confirmed biodegradation by analyzing Δδ13C in the PS before and after biotreatment (-28.37 versus -24.88) as an effective tool. The ·OH radicals, primarily contributed by gut microbiota, and H2O2, primarily produced by the host, both increased after MP digestion. The size distribution of residual MP particles in excrements fluctuated within the micrometer ranges. PS NPs were detected in the intestine but not in the excrements. At the end of Weeks 1, 2, 3, and 4, the concentrations of PS NPs in gut tissues were 3.778, 2.505, 2.087, and 2.853 ng/lava, respectively, while PS NPs in glands were quantified at 0.636, 0.284, and 0.113 ng/lava and eventually fell below the detection limit. The PS NPs in glands remained below the detection limit at the end of Weeks 5 and 6. This indicates that initially, NPs generated in the gut entered glands, then declined gradually and eventually disappeared or possibly biodegraded after Week 4, associated with the elevated plastic-degrading capacities of T. molitor larvae. Our findings unveil rapid synergistic MP biodegradation by the larval host and gut microbiota, as well as the fate of generated NPs, providing new insights into the risks and fate associated with NPs during invertebrate-mediated plastic biodegradation.
Subject(s)
Biodegradation, Environmental , Larva , Microplastics , Polystyrenes , Tenebrio , Animals , Microplastics/metabolism , Tenebrio/metabolism , Larva/metabolism , Plastics/metabolism , Gastrointestinal MicrobiomeABSTRACT
Plastic pollution poses a significant threat to terrestrial ecosystems, yet the potential for soil fauna to contribute to plastic biodegradation remains largely unexplored. In this study, we reveal that soil-dwelling grubs, Protaetia brevitarsis larvae, can effectively biodegrade polystyrene (PS) plastics. Over a period of 4 weeks, these grubs achieved a remarkable 61.5 % reduction in PS foam mass. This biodegradation was confirmed by the depolymerization of ingested PS, formation of oxidative functional groups, noticeable chemical modifications, and an increase of δ13C of residual PS in frass. Additionally, antibiotic treatment to suppress gut microbes led to variations in the biodegradation process. PS ingestion induced a significant shift in the gut microbiome, promoting the growth of degradation-related bacteria such as Promicromonosporaceae, Bacillaceae, and Paenibacillaceae. Furthermore, the digestion of plastic triggered extensive metabolomic reprogramming of grubs' intestines, enhancing redox capabilities and facilitating PS biodegradation. These results indicate that responsive adaptation of both the gut microbiome and the host's intestinal metabolism contributes to PS degradation. Collectively, these findings demonstrate P. brevitarsis larvae's capability to alleviate soil plastic pollution, and highlight the potential of researching soil fauna further for sustainable plastic waste management solutions.
Subject(s)
Biodegradation, Environmental , Gastrointestinal Microbiome , Larva , Polystyrenes , Gastrointestinal Microbiome/drug effects , Animals , Soil Pollutants/metabolism , Soil/chemistry , Soil MicrobiologyABSTRACT
The biodegradation of polypropylene (PP), a highly persistent nonhydrolyzable polymer, by Tenebrio molitor has been confirmed using commercial PP microplastics (MPs) (Mn 26.59 and Mw 187.12 kDa). This confirmation was based on the reduction of the PP mass, change in molecular weight (MW), and a positive Δδ13C in the residual PP. A MW-dependent biodegradation mechanism was investigated using five high-purity PP MPs, classified into low (0.83 and 6.20 kDa), medium (50.40 and 108.0 kDa), and high (575.0 kDa) MW categories to access the impact of MW on the depolymerization pattern and associated gene expression of gut bacteria and the larval host. The larvae can depolymerize/biodegrade PP polymers with high MW although the consumption rate and weight losses increased, and survival rates declined with increasing PP MW. This pattern is similar to observations with polystyrene (PS) and polyethylene (PE), i.e., both Mn and Mw decreased after being fed low MW PP, while Mn and/or Mw increased after high MW PP was fed. The gut microbiota exhibited specific bacteria associations, such as Kluyvera sp. and Pediococcus sp. for high MW PP degradation, Acinetobacter sp. for medium MW PP, and Bacillus sp. alongside three other bacteria for low MW PP metabolism. In the host transcriptome, digestive enzymes and plastic degradation-related bacterial enzymes were up-regulated after feeding on PP depending on different MWs. The T. molitor host exhibited both defensive function and degradation capability during the biodegradation of plastics, with high MW PP showing a relatively negative impact on the larvae.
Subject(s)
Microbiota , Tenebrio , Animals , Tenebrio/metabolism , Tenebrio/microbiology , Plastics , Polypropylenes/metabolism , Microplastics , Molecular Weight , Polystyrenes , Larva/metabolism , Bacteria/metabolism , Biodegradation, EnvironmentalABSTRACT
Polyethylene (PE) is the most productive plastic product and includes three major polymers including high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE) and low-density polyethylene (LDPE) variation in the PE depends on the branching of the polymer chain and its crystallinity. Tenebrio obscurus and Tenebrio molitor larvae biodegrade PE. We subsequently tested larval physiology, gut microbiome, oxidative stress, and PE degradation capability and degradation products under high-purity HDPE, LLDPE, and LDPE powders (<300 µm) diets for 21 days at 65 ± 5% humidity and 25 ± 0.5 °C. Our results demonstrated the specific PE consumption rates by T. molitor was 8.04-8.73 mg PE â 100 larvae-1â day-1 and by T. obscurus was 7.68-9.31 for LDPE, LLDPE and HDPE, respectively. The larvae digested nearly 40% of the ingested three PE and showed similar survival rates and weight changes but their fat content decreased by 30-50% over 21-day period. All the PE-fed groups exhibited adverse effects, such as increased benzoquinone concentrations, intestinal tissue damage and elevated oxidative stress indicators, compared with bran-fed control. In the current study, the digestive tract or gut microbiome exhibited a high level of adaptability to PE exposure, altering the width of the gut microbial ecological niche and community diversity, revealing notable correlations between Tenebrio species and the physical and chemical properties (PCPs) of PE-MPs, with the gut microbiome and molecular weight change due to biodegradation. An ecotoxicological simulation by T.E.S.T. confirmed that PE degradation products were little ecotoxic to Daphnia magna and Rattus norvegicus providing important novel insights for future investigations into the environmentally-friendly approach of insect-mediated biodegradation of persistent plastics.
Subject(s)
Biodegradation, Environmental , Larva , Microplastics , Polyethylene , Tenebrio , Animals , Tenebrio/metabolism , Polyethylene/metabolism , Microplastics/toxicity , Gastrointestinal Microbiome/drug effects , Oxidative StressABSTRACT
Microplastic (MP) pollution is widely spread in oceans, freshwater, and terrestrial environments but MPs in mountainous headwater ecosystem are rarely reported. This study focuses on the headwater of Yangtze tributaries of the Hindu Kush-Himalayan (HKH) region. Five streams at elevations of 900 to 3300 m were selected to investigate the distribution of MPs in water and sediments across altitudes. MPs were found in all water and sediment samples from top stream zone nearly in absence of anthropogenic activity, low anthropogenic zone, and high anthropogenic zone, increased from 12-54, 81-185 to 334-847 items/L, and 2-35, 26-84 to 124-428 items/kg, respectively. This elevation-dependent MP distribution indicated that as elevation decreased, anthropogenic activities intensified and increased MPs input and their abundance, size, and diversity. Notably, hydraulic projects, such as damming, were identified as potential barriers to the migration of MPs downstream. Microbiome analyses revealed the presence of bacterial genes associated with plastic biodegradation in all sediment samples. The study indicates that Shangri-la mountainous streams have been polluted with MPs for years with potential risk of generation of nano-sized particles via natural fragmentation and biodegradation, and thus raises concern on MPs pollution in headwaters streams in mountainous regions.
Subject(s)
Ecosystem , Environmental Monitoring , Geologic Sediments , Microplastics , Rivers , Water Pollutants, Chemical , Microplastics/toxicity , Microplastics/analysis , Water Pollutants, Chemical/toxicity , Water Pollutants, Chemical/analysis , Rivers/chemistry , Geologic Sediments/chemistry , China , Anthropogenic EffectsABSTRACT
Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.
ABSTRACT
Polyethylene terephthalate (PET or polyester) is a commonly used plastic and also contributes to the majority of plastic wastes. Mealworms (Tenebrio molitor larvae) are capable of biodegrading major plastic polymers but their degrading ability for PET has not been characterized based on polymer chain size molecular size, gut microbiome, metabolome and transcriptome. We verified biodegradation of commercial PET by T. molitor larvae in a previous report. Here, we reported that biodegradation of commercial PET (Mw 29.43 kDa) was further confirmed by using the δ13C signature as an indication of bioreaction, which was increased from - 27.50 to - 26.05. Under antibiotic suppression of gut microbes, the PET was still depolymerized, indicating that the host digestive enzymes could degrade PET independently. Biodegradation of high purity PET with low, medium, and high molecular weights (MW), i.e., Mw values of 1.10, 27.10, and 63.50 kDa with crystallinity 53.66%, 33.43%, and 4.25%, respectively, showed a mass reduction of > 95%, 86%, and 74% via broad depolymerization. Microbiome analyses indicated that PET diets shifted gut microbiota to three distinct structures, depending on the low, medium, and high MW. Metagenome sequencing, transcriptomic, and metabolic analyses indicated symbiotic biodegradation of PET by the host and gut microbiota. After PET was fed, the host's genes encoding degradation enzymes were upregulated, including genes encoding oxidizing, hydrolyzing, and non-specific CYP450 enzymes. Gut bacterial genes for biodegrading intermediates and nitrogen fixation also upregulated. The multiple-functional metabolic pathways for PET biodegradation ensured rapid biodegradation resulting in a half-life of PET less than 4 h with less negative impact by PET MW and crystallinity.
Subject(s)
Tenebrio , Animals , Tenebrio/metabolism , Tenebrio/microbiology , Polystyrenes/metabolism , Polyethylene Terephthalates/metabolism , Polymers , Larva/metabolism , Polyethylene/metabolism , Plastics/metabolism , Biodegradation, Environmental , MetabolomeABSTRACT
It remains unknown whether plastic-biodegrading macroinvertebrates generate microplastics (MPs) and nanoplastics (NPs) during the biodegradation of plastics. In this study, we utilized highly sensitive particle analyzers and pyrolyzer-gas chromatography mass spectrometry (Py-GCMS) to investigate the possibility of generating MPs and NPs in frass during the biodegradation of polystyrene (PS) and low-density polyethylene (LDPE) foams by mealworms (Tenebrio molitor larvae). We also developed a digestive biofragmentation model to predict and unveil the fragmentation process of ingested plastics. The mealworms removed 77.3% of ingested PS and 71.1% of ingested PE over a 6-week test period. Biodegradation of both polymers was verified by the increase in the δ13C signature of residual plastics, changes in molecular weights, and the formation of new oxidative functional groups. MPs accumulated in the frass due to biofragmentation, with residual PS and PE exhibiting the maximum percentage by number at 2.75 and 7.27 µm, respectively. Nevertheless, NPs were not detected using a laser light scattering sizer with a detection limit of 10 nm and Py-GCMS analysis. The digestive biofragmentation model predicted that the ingested PS and PE were progressively size-reduced and rapidly biodegraded, indicating the shorter half-life the smaller plastic particles have. This study allayed concerns regarding the accumulation of NPs by plastic-degrading mealworms and provided critical insights into the factors controlling MP and NP generation during macroinvertebrate-mediated plastic biodegradation.
Subject(s)
Polystyrenes , Tenebrio , Animals , Polyethylene , Tenebrio/metabolism , Plastics , Larva/metabolism , Biodegradation, Environmental , MicroplasticsABSTRACT
It is widely understood that microplastics (MPs) can induce various biological stresses in macroinvertebrates that are incapable of biodegrading plastics. However, the biodegradation and physiological responses of plastic-degrading macroinvertebrates toward MPs of different degradability levels remain unexplored. In this study, Tenebrio molitor larvae (mealworms) were selected as a model of plastics-degrading macroinvertebrate, and were tested against three common plastics of different degradability rankings: polyvinyl chloride (PVC), polystyrene (PS), and polylactic acid (PLA) MPs (size <300 µm). These three MPs were biodegraded with the rate sequence of PLA > PS > PVC, resulting in a reversed order of negative physiological responses (body weight loss, decreased survival, and biomass depletion) of mealworms. Simultaneously, the levels of reactive oxygen species (ROS), antioxidant enzyme activities, and lipid peroxidation were uniformly increased as polymer degradability decreased and intermediate toxicity increased. PVC MPs exhibited higher toxicity than the other two polymers. The oxidative stresses were effectively alleviated by supplementing co-diet bran. The T. molitor larvae fed with PLA plus bran showed sustainable growth without an increase in oxidative stress. The results provide new insights into the biotoxicity of MPs on macroinvertebrates and offer comprehensive information on the physiological stress responses of plastic-degrading macroinvertebrates during the biodegradation of plastics with different degradability levels.
Subject(s)
Polystyrenes , Tenebrio , Animals , Polystyrenes/toxicity , Larva/metabolism , Tenebrio/metabolism , Plastics , Microplastics/toxicity , Microplastics/metabolism , Polyvinyl Chloride , Polyesters/metabolism , Antioxidants/metabolismABSTRACT
Polyethylene terephthalate (PET) is a mass-produced fossil-based plastic polymer that contributes to catastrophic levels of plastic pollution. Here we demonstrated that Tenebrio molitor (mealworms) was capable of rapidly biodegrading two commercial PET resins (microplastics) with respective weight-average molecular weight (Mw) of 39.33 and 29.43 kDa and crystallinity of 22.8 ± 3.06% and 18 ± 2.25%, resulting in an average mass reduction of 71.03% and 73.28% after passage of their digestive tract, and respective decrease by 9.22% and 11.36% in Mw of residual PET polymer in egested frass. Sequencing of 16 S rRNA gene amplicons of gut microbial communities showed that dominant bacterial genera were enriched and associated with PET degradation. Also, PICRUSt prediction exhibited that oxidases (monooxygenases and dioxygenases), hydrolases (cutinase, carboxylesterase and chitinase), and PET metabolic enzymes, and chemotaxis related functions were up-regulated in the PET-fed larvae. Additionally, metabolite analyses revealed that PET uptake caused alterations of stress response and plastic degradation related pathways, and lipid metabolism pathways in the T. molitor larvae could be reprogrammed when the larvae fed on PET. This study provides new insights into gut microbial community adaptation to PET diet under nutritional stress (especially nitrogen deficiency) and its contribution to PET degradation.
Subject(s)
Gastrointestinal Microbiome , Tenebrio , Animals , Larva/metabolism , Tenebrio/metabolism , Tenebrio/microbiology , Plastics/metabolism , Polymers , Polyethylene Terephthalates/metabolism , Polystyrenes/metabolismABSTRACT
Tenebrio molitor and Tenebrio obscurus (Coleoptera: Tenebrionidae) larvae are two commercial insects that eat plant and crop residues as diets and also biodegrade synthetic plastics polyethylene (PE). We examined biodegradation of low-density PE (LDPE) foam (Mn = 28.9 kDa and Mw = 342.0 kDa) with and without respective co-diets, i.e., wheat brain (WB) or corn flour (CF), corn straw (CS), and rice straw (RS) at 4:1 (w/w), and their gut microbiome and genetic metabolic functional groups at 27.0 ± 0.5 °C after 28 days of incubation. The presence of co-diets enhanced LDPE consumption in both larvae and broad-depolymerized the ingested LDPE. The diet type shaped gut microbial diversity, potential pathways, and metabolic functions. The sequence of effectiveness of co-diets was WB or CF > CS > RS for larval development and LDPE degradation. Co-occurrence networks indicated that the larvae co-fed with LDPE displayed more complex correlations of gut microbiome than the larvae fed with single diets. The primary diet of WB or CF and crop residues CS and RS provided energy and nitrogen source to significantly enhance LDPE biodegradation with synergistic activities of the gut microbiota. For the larvae fed LDPE and LDPE plus co-diets, nitrogen fixation function was stimulated compared to normal diets and associated with LDPE biodegradation.
Subject(s)
Coleoptera , Gastrointestinal Microbiome , Tenebrio , Animals , Larva/metabolism , Tenebrio/metabolism , Polyethylene , Polystyrenes , Carbon/metabolism , Coleoptera/metabolism , DietABSTRACT
Biodegradation of polystyrene (PS) in mealworms (Tenebrio molitor lavae) has been identified with commercial PS foams. However, there is currently limited understanding of the influence of molecular weight (MW) on insect-mediated plastic biodegradation and the corresponding responses of mealworms. In this study, we provided the results of PS biodegradation, gut microbiome, and metabolome by feeding mealworms with high-purity PS microplastics with a wide variety of MW. Over 24 days, mealworms (50 individuals) fed with 0.20 g of PS showed decreasing removal of 74.1 ± 1.7, 64.1 ± 1.6, 64.4 ± 4.0, 73.5 ± 0.9, 60.6 ± 2.6, and 39.7 ± 4.3% for PS polymers with respective weight-average molecular weights (Mw) of 6.70, 29.17, 88.63, 192.9, 612.2, and 1346 kDa. The mealworms degraded most PS polymers via broad depolymerization but ultrahigh-MW PS via limited-extent depolymerization. The gut microbiome was strongly associated with biodegradation, but that with low- and medium-MW PS was significantly distinct from that with ultrahigh-MW PS. Metabolomic analysis indicated that PS biodegradation reprogrammed the metabolome and caused intestinal dysbiosis depending on MW. Our findings demonstrate that mealworms alter their gut microbiome and intestinal metabolic pathways in response to in vivo biodegradation of PS polymers of various MWs.
Subject(s)
Gastrointestinal Microbiome , Tenebrio , Humans , Animals , Tenebrio/metabolism , Polystyrenes , Plastics , Gastrointestinal Microbiome/physiology , Molecular Weight , Polymers , Larva/metabolism , MetabolomeABSTRACT
Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.
Subject(s)
Microplastics , Water Pollutants, Chemical , Plastics , Environmental Monitoring , Water Pollutants, Chemical/analysis , RiversABSTRACT
It is generally believed that the ability of nanoplastics (NPs) to mobilize other contaminants is due to direct adsorption; however, this intuitive belief is questioned in this study when it comes to a historically contaminated soil where mining activities since 1958 have resulted in arsenic (As) and cadmium (Cd) enrichment. Negatively charged polystyrene (PS) NPs were used in this study, which should theoretically stimulate Cd (metal cation) instead of As (negatively charged oxyanion) leaching if direct adsorption accounted for co-transport. Surprisingly, PS NPs enhanced the leaching of As by up to over 5 times (p value < 0.05), but had almost no effect on Cd leaching (p value > 0.05). A novel indirect displacement model was therefore developed to describe the phenomenon of enhanced As leaching. It has been found that negatively charged NPs interacted with As via competition for soil binding sites. Underlying mechanistic insights were further explored via both theoretical calculations with the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) approach, and direct characterization using Scanning Electron Microscopy (SEM) and Computed X-ray Microtomography (µCT) showing binding sites and flow channels, respectively. The overall results provide new and valuable insights into NP-metal(loid) interactions in the natural soil environment, which can be integrated in future studies regarding the transport and risk assessment of NPs, and toxic metal(loid)s.
Subject(s)
Arsenic , Metalloids , Soil Pollutants , Arsenic/chemistry , Cadmium/chemistry , Metals , Microplastics , Polystyrenes/chemistry , Soil/chemistry , Soil Pollutants/analysisABSTRACT
Yellow and dark mealworms (Tenebrio molitor and Tenebrio obscurus) biodegrade commercial polyethylene (PE) materials at a high rate. We examined the impact of physical and chemical properties on biodegradation using high purity microplastics (MPs). These included high-density polyethylene (HDPE), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE), all with different weight average molecular weights (Mw) and different crystallinity degrees in T. molitor and T. obscurus larvae. The biodegradation extent in the two mealworms was similar but strongly depended on the polymer type in sequence, since LDPE > LLDPE> HDPE (with respective Mw of 222.5, 110.5 and 182 kDa). When LDPE MPs with Mw of 0.84, 6.4 and 106.8 kDa and HDPE with Mw of 52, 105 and 132.7 kDa were tested, the PE MPs with lower Mw showed a greater extent of depolymerization. The results of dominance analysis indicated that less branching structure and higher crystallinity degree negatively impacted depolymerization and biodegradation. Py-GC/MS analysis confirmed the breaking of the macromolecule backbone as well as the formation of oxidized functional groups after all the tested PE materials passed through the mealworm intestine. The results demonstrated that molecular weight, PE type, branching, and crystallinity degree significantly affect the biodegradation capability of PE by the mealworms, and possibly by other biological systems as well.
Subject(s)
Tenebrio , Animals , Biodegradation, Environmental , Larva/metabolism , Microplastics , Plastics/metabolism , Polyethylene/metabolism , Polystyrenes/metabolism , Tenebrio/metabolismABSTRACT
Plastic biodegradation by mealworm is regarded as an emerging strategy for plastic disposal. In this study, the polystyrene (PS) and low density polyethylene (LDPE) degradation efficiency by yellow mealworms (Tenebrio molitor larvae) supplemented with bran and the effects of plastics on the gut core microbiome were explored to construct a circular and continuous reactor for plastic biodegradation in the future. The gut microbiome was also investigated with dietary shift to explore the relationship between specific diets and gut microbes. The bran plus plastic (7:1 ratio, w/w) co-diet contributed to the mealworm survival and growth. The formation of -CËO-/-C-O- groups in the plastic-fed mealworms frass represented the oxidation process of plastic biodegradation in the mealworm gut. The changes in molecular weights (Mw, Mn and Mz) of residual PS and LDPE in mealworms frass compared with that of PS and PE feedstock confirmed the plastic depolymerization and biodegradation. Lactobacillus and Mucispirillum were significantly associated with PE + bran diet compared to bran diet and PE diet, representing the response of mealworm gut microbiome to the bran and plastic mixture was distinguished from either bran or plastics alone. The gut microbiome changed substantially with the diet shift, indicating that microbial community assembly was a stochastic process and diverse plastic-degrading bacteria might occur in the mealworm gut.
Subject(s)
Gastrointestinal Microbiome , Tenebrio , Animals , Diet , Polyethylene , PolystyrenesABSTRACT
Terrestrial soils are not only a large reservoir for Microplastics (MPs), but also a possible entrance to the subsurface environment, posing potential risks to the subterranean habitats and groundwater. In this study, we examined the vertical transport of MPs of four polymers, i.e., polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP) and polyamide (PA), in porous sand media driven by wet-dry cycling. The effects of polymer properties, MP size, sand particle size, wet-dry cycles, and dissolved organic matter (DOM) on their migration behavior were investigated. Surface hydrophobicity showed a strong positive correlation with MP mobility, with PA exhibiting the greatest movement potential, followed by PE, PET, and PP. The penetration depth of MP particles increased with decreasing MP particle size (dMP) and increasing sand diameter (dsand). MP particles migrated deeper in sand media when dMP/dsand < 0.11. Furthermore, frequent wet-dry cycles and the presence of DOM promoted the vertical migration of MPs in the sand. The results revealed multiple factors influencing the vertical migration of MPs in sand, which is instructive for understanding the ecological risk of MPs in potentially contaminated soil (e.g., farmland with long-term mulching) to the subsurface environment and potential negative impact to public health.