[A theoretical study on a method for estimating dynamic intrinsic positive end-expiratory pressure in invasive mechanical ventilation].

OBJECTIVE: To explore a simple method for measuring the dynamic intrinsic positive end-expiratory pressure (PEEPi) during invasive mechanical ventilation. METHODS: A 60-year-old male patient was admitted to the critical care medicine department of Dongying People's Hospital in September 2020. He underwent invasive mechanical ventilation treatment for respiratory failure due to head and chest trauma, and incomplete expiratory flow occurred during the treatment. The expiratory flow-time curve of this patient was served as the research object. The expiratory flow-time curve of the patient was observed, the start time of exhalation was taken as T0, the time before the initiation of inspiratory action (inspiratory force) was taken as T1, and the time when expiratory flow was reduced to zero by inspiratory drive (inspiratory force continued) was taken as T2. Taking T1 as the starting point, the follow-up tracing line was drawn according to the evolution trending of the natural expiratory curve before the T1 point, until the expiratory flow reached to 0, which was called T3 point. According to the time phase, the intrapulmonary pressure at the time just from expiratory to inspiratory (T1 point) was called PEEPi1. When the expiratory flow was reduced to 0 (T2 point), the intrapulmonary pressure with the inhaling power being removed hypothetically was called PEEPi2. And it was equal to positive end-expiratory pressure (PEEP) set in the ventilator at T3 point. The area under the expiratory flow-time curve (expiratory volume) between T0 and T1 was called S1. And it was S2 between T0 and T2, S3 between T0 and T3. After sedation, in the volume controlled ventilation mode, approximately one-third of the tidal volume was selected, and the static compliance of patient's respiratory system called "C" was measured using the inspiratory pause method. PEEPi1 and PEEP2 were calculated according to the formula "C = ΔV/ΔP". Here, ΔV was the change in alveolar volume during a certain period of time, and ΔP represented the change in intrapulmonary pressure during the same time period. This estimation method had obtained a National Invention Patent of China (ZL 2020 1 0391736.1). RESULTS: (1) PEEPi1: according to the formula "C = ΔV/ΔP", the expiratory volume span from T1 to T3 was "S3-S1", and the intrapulmonary pressure decreased span was "PEEPi1-PEEP". So, C = (S3-S1)/(PEEPi1-PEEP), PEEPi1 = PEEP+(S3-S1)/C. (2)PEEPi2: the expiratory volume span from T2 to T3 was "S3-S2", and the intrapulmonary pressure decreased span was "PEEPi2-PEEP". So, C = (S3-S2)/(PEEPi2-PEEP), PEEPi2 = PEEP+(S3-S2)/C. CONCLUSIONS: For patients with incomplete expiratory during invasive mechanical ventilation, the expiratory flow-time curve extension method can theoretically be used to estimate the dynamic PEEPi in real time.

Essential oil from Citrus depressa peel exhibits antimicrobial, antioxidant and cancer chemopreventive effects.

BACKGROUND: Many diseases may be caused by pathogens and oxidative stress resulting from carcinogens. Earlier studies have highlighted the antimicrobial and antioxidant effects of plant essential oils (EO). It is crucial to effectively utilize agricultural waste to achieve a sustainable agricultural economy and protect the environment. The present study aimed to evaluate the potential benefits of EO extracted from the discarded peels of Citrus depressa Hayata (CD) and Citrus microcarpa Bunge (CM), synonyms of Citrus deliciosa Ten and Citrus japonica Thunb, respectively. RESULTS: Gas chromatography-mass spectrometry analysis revealed that the main compounds in CD-EO were (R)-(+)-limonene (38.97%), γ-terpinene (24.39%) and linalool (6.22%), whereas, in CM-EO, the main compounds were (R)-(+)-limonene (48.00%), ß-pinene (13.60%) and γ-terpinene (12.07%). CD-EO exhibited inhibitory effects on the growth of common microorganisms, including Candida albicans, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. However, CM-EO showed only inhibitory effects on E. coli. Furthermore, CD-EO exhibited superior antioxidant potential, as demonstrated by its ability to eliminate 1,1-diphenyl-2-picrylhydrazyl and 2,2'-azinobis-3-ethylbenzthiazoline-6-sulfonate free radicals. Furthermore, CD-EO at a concentration of 100 µg mL-1 significantly inhibited 12-O-tetradecanoylphorbol-13-acetate-induced cancer transformation in mouse epidermal JB6 P+ cells (P < 0.05), possibly by up-regulating protein expression of nuclear factor erythroid 2-related factor 2 and its downstream antioxidant enzymes, such as NAD(P)H:quinone oxidoreductase 1, heme oxygenase-1 and UGT1A. CONCLUSION: These findings suggest that CD-EO exhibits inhibitory effects on pathogenic microorganisms, possesses antioxidant properties and has cancer chemopreventive potential. © 2024 Society of Chemical Industry.

[Respiratory mechanics analysis of inspiratory trigger in mechanical ventilation].

OBJECTIVE: To find out the circuit pressure and flow at the trigger point by observing the characteristics of the inspiratory trigger waveform of the ventilator, confirm the intra-alveolar pressure as the index to reflect the effort of the trigger according to the working principle of the ventilator combined with the laws of respiratory mechanics, establish the related mathematical formula, and analyze its influencing factors and logical relationship. METHODS: A test-lung was connected to the circuit in a PB840 ventilator and a SV600 ventilator set in pressure-support mode. The positive end-expiratory pressure (PEEP) was set at 5 cmH2O (1 cmH2O ≈ 0.098 kPa), and the wall of test-lung was pulled outwards till an inspiratory was effectively triggered separately in slow, medium, fast power, and separately in flow-trigger mode (sensitivity VTrig 3 L/min, 5 L/min) and pressure-trigger mode (sensitivity PTrig 2 cmH2O, 4 cmH2O). By adjusting the scale of the curve in the ventilator display, the loop pressure and flow corresponding to the trigger point under different triggering conditions were observed. Taking intraalveolar pressure (Pa) as the research object, the Pa (called Pa-T) needed to reach the effective trigger time (TT) was analyzed in the method of respiratory mechanics, and the amplitude of pressure change (ΔP) and the time span (ΔT) of Pa during triggering were also analyzed. RESULTS: (1) Corresponding relationship between pressure and flow rate at TT time: in flow-trigger mode, in slow, medium and fast trigger, the inhalation flow rate was VTrig, and the circuit pressure was separately PEEP, PEEP-Pn, and PEEP-Pn' (Pn, Pn', being the decline range, and Pn' > Pn). In pressure-trigger mode, the inhalation flow rate was 1 L/min (PB840 ventilator) or 2 L/min (SV600 ventilator), and the circuit pressure was PEEP-PTrig. (2) Calculation of Pa-T: in flow-trigger mode, in slow trigger: Pa-T = PEEP-VTrigR (R represented airway resistance). In medium trigger: Pa-T = PEEP-Pn-VTrigR. In fast trigger: Pa-T = PEEP-Pn'-VTrigR. In pressure-trigger mode: Pa-T = PEEP-PTrig-1R. (3) Calculation of ΔP: in flow trigger mode, in flow trigger: without intrinsic PEEP (PEEPi), ΔP = VTrigR; with PEEPi, ΔP = PEEPi-PEEP+VTrigR. In medium trigger: without PEEPi, ΔP = Pn+VTrigR; with PEEPi, ΔP = PEEPi-PEEP+Pn+VTrigR. In fast trigger: without PEEPi, ΔP = Pn'+VTrigR; with PEEPi, ΔP = PEEPi-PEEP+Pn'+VTrigR. In pressure-trigger mode, without PEEPi, ΔP = PTrig+1R; with PEEPi, ΔP = PEEPi-PEEP+PTrig+1R. (4) Pressure time change rate of Pa (FP): FP = ΔP/ΔT. In the same ΔP, the shorter the ΔT, the greater the triggering ability. Similarly, in the same ΔT, the bigger the ΔP, the greater the triggering ability. The FP could better reflect the patient's triggering ability. CONCLUSIONS: The patient's inspiratory effort is reflected by three indicators: the minimum intrapulmonary pressure required for triggering, the pressure span of intrapulmonary pressure, and the pressure time change rate of intrapulmonary pressure, and formula is established, which can intuitively present the logical relationship between inspiratory trigger related factors and facilitate clinical analysis.

Triggering Lattice Oxygen Activation of Single-Atomic Mo Sites Anchored on Ni-Fe Oxyhydroxides Nanoarrays for Electrochemical Water Oxidation.

Tuning the reactivity of lattice oxygen is of significance for lowering the energy barriers and accelerating the oxygen evolution reaction (OER). Herein, single-atomic Mo sites are anchored on Ni-Fe oxyhydroxide nanoarrays by a facile metal-organic-framework-derived strategy, exhibiting superior performance toward the OER in alkaline media. In situ electrochemical spectroscopy and isotope-labeling experiments reveal the involvement of lattice oxygen during OER cycles. Combining theoretical and experimental investigations of the electronic configuration, it is comprehensively confirmed that the incorporation of single-atomic Mo sites enables higher oxidation state of the metal and strengthened metal-oxygen hybridization, as well as the formation of oxidized ligand holes above the Fermi level. In a word, the considerable acceleration of water oxidation is achieved via enhancing the reactivity of lattice oxygen and triggering the lattice oxygen activation. This work may provide new insights for designing ideal electrocatalysts via tuning the chemical state and activating the anions ligands.

Effects of Gender and Age in Mandibular Leeway Space for Taiwanese Children.

PURPOSE: Leeway space is clinically crucial in pediatric dentistry because it is utilized to resolve tooth crowding and allow the first molars to drift mesially to establish a Class I molar relationship in the later stages of mixed dentition. This study investigated leeway space in the mixed dentition of Taiwanese children of different sexes and ages. MATERIALS AND METHODS: The digital panoramic dental films of 182 lower arches of 119 boys and 63 girls aged 5-10 years were analyzed in this retrospective study. The mesiodistal crown widths of the primary canines and first and second molars and the permanent canines and first and second premolars were measured using medical imaging software. Differences in leeway space were statistically analyzed. RESULTS: The average leeway space was 1.29 ± 1.48 mm on each side of the lower arch. The leeway space of children aged 5-6 years was significantly greater than that of children aged 7-8 years. No gender difference in crown width was discovered, except with regard to the primary first molar. Although no gender difference in leeway space was observed, permanent teeth affected leeway space more for girls than for boys. CONCLUSION: In Taiwanese children, although leeway space does not differ by sex, age affects leeway space. However, permanent tooth size has an influence on the leeway space of girls.

Evaluation of Gallic Acid-Coated Gold Nanoparticles as an Anti-Aging Ingredient.

Hyperglycemic environment-induced oxidative stress-mediated matrix metalloproteinase-1 (MMP-1) plays a crucial role in the degradation of the extracellular matrix (ECM), which might contribute to premature skin aging. Synthesized, environmentally friendly gallic acid-coated gold nanoparticles (GA-AuNPs) have been evaluated as an anti-aging antioxidant. Their microstructure was characterized by transmission electron microscopy (TEM), which showed that GA-AuNPs are spherical when prepared at pH 11. Dynamic light scattering (DLS) analysis revealed that the average hydrodynamic diameter of a GA-AuNP is approximately 40 nm and with a zeta potential of -49.63 ± 2.11 mV. Additionally, the present data showed that GA-AuNPs have a superior ability to inhibit high glucose-mediated MMP-1-elicited type I collagen degradation in dermal fibroblast cells. Collectively, our data indicated that high-glucose-mediated ROS production was reduced upon cell treatment with GA-AuNPs, which blocked p38 MAPK/ERK-mediated c-Jun, c-Fos, ATF-2 phosphorylation, and the phosphorylation of NFκB, leading to the down-regulation of MMP-1 mRNA and protein expression in high glucose-treated cells. Our findings suggest that GA-AuNPs have a superior ability to inhibit high-glucose-mediated MMP-1-elicited ECM degradation, which highlights its potential as an anti-aging ingredient.

Engineering Single-Atomic Ni-N4-O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting.

Direct photoelectrochemical (PEC) water splitting is a promising solution for solar energy conversion; however, there is a pressing bottleneck to address the intrinsic charge transport for the enhancement of PEC performance. Herein, a versatile coupling strategy was developed to engineer atomically dispersed Ni-N4 sites coordinated with an axial direction oxygen atom (Ni-N4-O) incorporated between oxygen evolution cocatalyst (OEC) and semiconductor photoanode, boosting the photogenerated electron-hole separation and thus improving PEC activity. This state-of-the-art OEC/Ni-N4-O/BiVO4 photoanode exhibits a record high photocurrent density of 6.0 mA cm-2 at 1.23 V versus reversible hydrogen electrode (vs RHE), over approximately 3.97 times larger than that of BiVO4, achieving outstanding long-term photostability. From X-ray absorption fine structure analysis and density functional theory calculations, the enhanced PEC performance is attributed to the construction of single-atomic Ni-N4-O moiety in OEC/BiVO4, facilitating the holes transfer, decreasing the free energy barriers, and accelerating the reaction kinetics. This work enables us to develop an effective pathway to design and fabricate efficient and stable photoanodes for feasible PEC water splitting application.

Engineering Lattice Oxygen Activation of Iridium Clusters Stabilized on Amorphous Bimetal Borides Array for Oxygen Evolution Reaction.

Developing robust oxygen evolution reaction (OER) catalysts requires significant advances in material design and in-depth understanding for water electrolysis. Herein, we report iridium clusters stabilized surface reconstructed oxyhydroxides on amorphous metal borides array, achieving an ultralow overpotential of 178 mV at 10 mA cm-2 for OER in alkaline medium. The coupling of iridium clusters induced the formation of high valence cobalt species and Ir-O-Co bridge between iridium and oxyhydroxides at the atomic scale, engineering lattice oxygen activation and non-concerted proton-electron transfer to trigger multiple active sites for intrinsic pH-dependent OER activity. The lattice oxygen oxidation mechanism (LOM) was confirmed by in situ 18 O isotope labeling mass spectrometry and chemical recognition of negative peroxo-like species. Theoretical simulations reveal that the OER performance on this catalyst is intrinsically dominated by LOM pathway, facilitating the reaction kinetics. This work not only paves an avenue for the rational design of electrocatalysts, but also serves the fundamental insights into the lattice oxygen participation for promising OER application.

Two-Dimensional Defective Boron-Doped Niobic Acid Nanosheets for Robust Nitrogen Photofixation.

Direct nitrogen photofixation is a feasible solution toward sustainable production of ammonia under mild conditions. However, the generation of active sites for solar-dirven nitrogen fixation not only limits the fundamental understanding of the relationship among light absorption, charge transfer, and catalytic efficiency but also influences the photocatalytic activity. Herein, we report two-dimensional boron-doped niobic acid nanosheets with oxygen vacancies (B-Vo-HNbO3 NSs) for efficient N2 photofixation in the absence of any scavengers and cocatalysts. Impressively, B-Vo-HNbO3 NS as a model catalyst achieves the enhanced ammonia evolution rate of 170 µmol gcat-1 h-1 in pure water under visible-light irradiation. The doublet coupling representing 15NH4+ in an isotopic labeling experiment and in situ infrared spectra confirm the reliable ammonia generation. The experimental analysis and density functional theory (DFT) calculations indicate that the strong synergy of boron dopant and oxygen vacancy regulates band structure of niobic acid, facilitates photogenerated charge transfer, reduces free energy barriers, accelerates reaction kinetics, and promotes the high rates of ammonia evolution. This work provides a general strategy to design active photocatalysts toward solar N2 conversion.

Engineering single-atomic ruthenium catalytic sites on defective nickel-iron layered double hydroxide for overall water splitting.

Rational design of single atom catalyst is critical for efficient sustainable energy conversion. However, the atomic-level control of active sites is essential for electrocatalytic materials in alkaline electrolyte. Moreover, well-defined surface structures lead to in-depth understanding of catalytic mechanisms. Herein, we report a single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets (Ru1/D-NiFe LDH). Under precise regulation of local coordination environments of catalytically active sites and the existence of the defects, Ru1/D-NiFe LDH delivers an ultralow overpotential of 18 mV at 10 mA cm-2 for hydrogen evolution reaction, surpassing the commercial Pt/C catalyst. Density functional theory calculations reveal that Ru1/D-NiFe LDH optimizes the adsorption energies of intermediates for hydrogen evolution reaction and promotes the O-O coupling at a Ru-O active site for oxygen evolution reaction. The Ru1/D-NiFe LDH as an ideal model reveals superior water splitting performance with potential for the development of promising water-alkali electrocatalysts.

Wheat TaPUB1 protein mediates ABA response and seed development through ubiquitination.

Abscisic acid (ABA) is an important regulator of plant growth, development, and biotic and abiotic stress responses. Ubiquitination plays important roles in regulating ABA signaling. E3 ligase, a key member in ubiquitination, actively participates in the regulation of biosynthesis, de-repression, and activation of ABA response and degradation of signaling components. In this study, we found that that overexpression of wheat E3 ligase TaPUB1 decreased the sensitivity of wheat seedlings to ABA, whereas TaPUB1-RNA interference (TaPUB1-RNAi) lines increased wheat sensitivity to ABA during germination, root growth, and stomatal opening. TaPUB1 influenced the expression of several ABA-responsive genes, and also interacted with TaPYL4 and TaABI5, which are involved in ABA signal transduction, and promoted their degradation. Additionally, we observed that TaPUB1-OE lines resulted in lower single-split grain numbers, larger seed size, and higher thousand kernel weight, when compared with the WT lines. Contrasting results were obtained for TaPUB1-RNAi lines. It suggests that TaPUB1 acts as a negative regulator in the ABA signaling pathway by interacting with TaPYL4 and TaABI5, subsequently affecting seed development in wheat. In addition, the enhanced abiotic tolerance of overexpression lines due to enhanced photosynthesis and root development may be related to the degradation of TaABI5 by TaPUB1.

Wheat TaPUB1 Regulates Cd Uptake and Tolerance by Promoting the Degradation of TaIRT1 and TaIAA17.

Cadmium (Cd) accumulation in agricultural soils is an increasingly serious problem, as plants absorb Cd, which inhibits their growth and development. Nonetheless, the molecular mechanisms underlying Cd detoxification and accumulation in wheat (Triticum aestivum L.) are unclear. Here, we isolated the U-box E3 ligase TaPUB1 from wheat and reported the functional characterization of TaPUB1 in Cd uptake and tolerance in wheat. Under Cd stress, TaPUB1 overexpression lines displayed higher photosynthetic rates than the wild type; opposite results were observed in the TaPUB1-RNAi lines. In addition, TaPUB1 overexpression lines showed reduced Cd uptake and accumulation, whereas RNAi plants exhibited a significant increase in Cd accumulation after Cd treatment. We further found that TaPUB1 enhanced the resistance of wheat to Cd stress in three ways. First, TaPUB1 interacts with and ubiquitinates TaIRT1, resulting in the inhibition of Cd uptake. Second, TaPUB1 interacts directly with and ubiquitinates TaIAA17, facilitates its degradation, and results in primary root elongation by activating the Aux signaling pathway under Cd stress. Moreover, TaPUB1 decreases ROS accumulation by regulating antioxidant-related gene expression and antioxidant enzyme activity under Cd stress. Thus, a molecular mechanism by which TaPUB1 regulates Cd uptake and tolerance by modulating the stability of TaIRT1 and TaIAA17 proteins was revealed.

[A theoretical analysis of respiratory mechanics in mechanical ventilation].

As a non-physiological way of ventilation, mechanical ventilation has a great effect on the respiratory mechanics. The biggest problem of artificial airway is that it brings extra airway resistance to the respiratory tract. For different parts of the lung, positive pressure ventilation could cause different mechanic states. We can find the formation and influencing factors of transpulmonary pressure, transchest wall pressure, trans-lung-chest pressure, trans-diaphragmatic pressure, trans-pulmonary-diaphragmatic pressure, intrapleural pressure, plateau pressure and driving pressure, by analyzing the mechanic state in a unit area of the chest or diaphragm position in the way of basic mechanics. It is obviously different in the pulmonary pressure gradient caused by inspiratory driving between in spontaneous breathing and in mechanical ventilation. The pressure is transmitted from the periphery to the center in spontaneous breathing in physiological state, playing a traction role for lung tissue. The pressure is transmitted from the center to the periphery in positive pressure ventilation without spontaneous breathing, playing a pushing role for lung tissue. It can be divided into two stages in positive pressure ventilation with spontaneous breathing. The first stage is from inspiratory trigger effort to trigger sensitivity. It is similar to spontaneous inspiration in physiological state. The pressure gradient in this stage is from the peripheral to center. But the period is very short. The second stage is the positive pressure ventilation progress after the trigger sensitivity. The pressure gradient is caused by the pulling of the patient's spontaneous inhalation and the pushing of the positive pressure ventilation of the ventilator. There is a certain complementarity in the distribution and transmission of pressure, especially for non-physiological positive pressure ventilation. Therefore, through these basic mechanical analysis, clinical medical staff can better understand the impact of mechanical ventilation on respiratory mechanics.

Engineering active sites on hierarchical transition bimetal oxides/sulfides heterostructure array enabling robust overall water splitting.

Rational design of the catalysts is impressive for sustainable energy conversion. However, there is a grand challenge to engineer active sites at the interface. Herein, hierarchical transition bimetal oxides/sulfides heterostructure arrays interacting two-dimensional MoOx/MoS2 nanosheets attached to one-dimensional NiOx/Ni3S2 nanorods were fabricated by oxidation/hydrogenation-induced surface reconfiguration strategy. The NiMoOx/NiMoS heterostructure array exhibits the overpotentials of 38 mV for hydrogen evolution and 186 mV for oxygen evolution at 10 mA cm-2, even surviving at a large current density of 500 mA cm-2 with long-term stability. Due to optimized adsorption energies and accelerated water splitting kinetics by theory calculations, the assembled two-electrode cell delivers the industrially relevant current densities of 500 and 1000 mA cm-2 at record low cell voltages of 1.60 and 1.66 V with excellent durability. This research provides a promising avenue to enhance the electrocatalytic performance of the catalysts by engineering interfacial active sites toward large-scale water splitting.

The wheat E3 ligase TaPUB26 is a negative regulator in response to salt stress in transgenic Brachypodium distachyon.

Various abiotic stresses, including high salinity, affect the growth and yield of crop plants. We isolated a gene, TaPUB26, from wheat that encodes a protein containing a U-box domain and armadillo (ARM) repeats. The TaPUB26 transcript levels were upregulated by high salinity, temperature, drought and phytohormones, suggesting the involvement of TaPUB26 in abiotic stress responses. An in vitro ubiquitination assay revealed that TaPUB26 is an E3 ubiquitin ligase. We overexpressed TaPUB26 in Brachypodium distachyon to evaluate TaPUB26 regulation of salt stress tolerance. Compared with the wild type (WT) line, the overexpression lines showed higher salt stress sensitivity under salt stress conditions, but lower chlorophyll (Chl) content, lower photosynthetic levels and overall reduced salt stress tolerance. Additionally, the transgenic plants showed more severe membrane damage, lower antioxidant enzyme activity and more reactive oxygen species (ROS) accumulation than WT plants under salt stress, which might be related to the changes in the expression levels of some antioxidant genes. In addition, the transgenic plants also had higher Na+ and lower K+ contents, thus maintaining a higher cytosolic Na+/K+ ratio in leaves and roots than that in WT plants. Further analysis of the molecular mechanisms showed that TaPUB26 interacted with TaRPT2a, an ATPase subunit of the 26S proteasome complex in wheat. We speculated that TaPUB26 negatively regulates salt stress tolerance by interacting with other proteins, such as TaRPT2a, and that this mechanism involves altered antioxidant competition and cytosolic Na+/K+ equilibrium.

Overexpression of wheat α-mannosidase gene TaMP impairs salt tolerance in transgenic Brachypodium distachyon.

KEY MESSAGE: The TaMP gene from wheat encodes an α-mannosidase induced by salt stress that functions as negative regulator of salt tolerance in plants. Salt stress significantly affects growth and yield of crop plants. The α-mannosidases function in protein folding, trafficking, and endoplasmic reticulum-associated degradation in eukaryotic cells, and they are involved in abiotic stress tolerance in plants. Previously, we identified the α-mannosidase gene TaMP in wheat (Triticum aestivum). In this study, we investigated the function of TaMP in salt stress tolerance. TaMP expression was induced in wheat leaves by salt, drought, abscisic acid, and H2O2 treatments. Overexpressing TaMP in Brachypodium distachyon was associated with a salt-sensitive phenotype. Under salt stress, the overexpressing plants had reduced height, delayed growth status, low photosynthetic rate, decreased survival rate, and diminished yield. Moreover, the overexpression of TaMP aggravated the tendency for ions to become toxic under salt stress by significantly affecting the Na+ and K+ contents in cells. In addition, TaMP could negatively regulate salt tolerance by affecting the antioxidant enzyme system capacity and increasing the reactive oxygen species accumulation. Our study was helpful to understand the underlying physiological and molecular mechanisms of salt stress tolerance in plants.

The involvement of wheat U-box E3 ubiquitin ligase TaPUB1 in salt stress tolerance.

U-box E3 ubiquitin ligases play important roles in the ubiquitin/26S proteasome machinery and in abiotic stress responses. TaPUB1-overexpressing wheat (Triticum aestivum L.) were generated to evaluate its function in salt tolerance. These plants had more salt stress tolerance during seedling and flowering stages, whereas the TaPUB1-RNA interference (RNAi)-mediated knock-down transgenic wheat showed more salt stress sensitivity than the wild type (WT). TaPUB1 overexpression upregulated the expression of genes related to ion channels and increased the net root Na+ efflux, but decreased the net K+ efflux and H+ influx, thereby maintaining a low cytosolic Na+ /K+ ratio, compared with the WT. However, RNAi-mediated knock-down plants showed the opposite response to salt stress. TaPUB1 could induce the expression of some genes that improved the antioxidant capacity of plants under salt stress. TaPUB1 also interacted with TaMP (Triticum aestivum α-mannosidase protein), a regulator playing an important role in salt response in yeast and in plants. Thus, low cytosolic Na+ /K+ ratios and better antioxidant enzyme activities could be maintained in wheat with overexpression of TaPUB1 under salt stress. Therefore, we conclude that the U-box E3 ubiquitin ligase TaPUB1 positively regulates salt stress tolerance in wheat.

Wheat F-box Protein TaFBA1 Positively Regulates Plant Drought Tolerance but Negatively Regulates Stomatal Closure.

The phytohormone abscisic acid (ABA) regulates plant growth and development, as well as responses to various stresses, such as salt and drought. The wheat TaFBA1 gene, which encodes an F-box protein, was previously identified in our laboratory by homologous cloning. We previously found that TaFBA1 expression was induced by ABA and drought stress. In this study, wild-type (WT), TaFBA1 over-expressing (OEs), TaFBA1 homologous gene mutants, and TaFBA1 recovery (Rs) Arabidopsis plants were used. We found that the germination rate, the cotyledon greening rate, the root length, and the photosynthetic performance of TaFBA1 OE plants were better than those of WT under drought and ABA conditions, but mutant plants showed the opposite trend, and overexpression of TaFBA1 in mutants can recover their phenotype. In addition, TaFBA1 was found to be a negative regulator of ABA-induced stoma movement; mRNA transcription of certain ABA signaling-related genes was lower in TaFBA1 OE plants than in WT plants following ABA treatment. Further, we found that TaFBA1 can interact with RCAR1 (an ABA receptor) and ABI5. BiFC assay showed that TaFBA1 may interact with RCAR1 in the plasma membrane. In addition, accumulation of ROS and MDA in TaFBA1 OE plants was lower than that in the WT plants after ABA and drought treatments. Based on these results, we suggest that TaFBA1-regulated ABA insensitivity may be dependent on regulating ABA-mediated gene expression through interacting with RCAR1 and ABI5. Increased antioxidant competence and decreased ROS accumulation may be an important mechanism that underlies improved drought tolerance in TaFBA1 OE plants.

[A mathematical calculation model of replacement fluid and citric acid infusion in continuous veno-venous hemofiltration].

OBJECTIVE: To design a mathematical calculation model for better understanding and grasping the logical problem of replacement fluid and citric acid anticoagulant infusion in continuous veno-venous hemofiltration (CVVH). METHODS: (1) Parameter definition: A, B, and T were respectively called the main part of pre-replacement fluid, 5% sodium bicarbonate solution, and 4% sodium citrate infused before filter. And a and b were respectively called the main part of post-replacement fluid, and 5% sodium bicarbonate solution infused after filter. (2) Logic conversion: The liquid in back terminal (Z) was artificially divided into two parts. One (X) was the original residual plasma after filtration. The second (Y) was the part excluding the plasma, including the left part of pre-replacement fluid with sodium citrate, and the post-replacement fluid. (3) The mathematical formulas of liquid volume and electrolyte concentration at X, Y and Z in unit time were listed according to the principle of CVVH and the screening coefficient of filter for different substances. (4) The calculation formulas were entered into Excel form, and a mathematical calculation model was made, and a simulation calculation with examples was carried out. RESULTS: An Excel model was established by inserting the calculation formulas of volume, electrolyte, and total calcium at X, Y and Z. And it was found that the concentration of Na+, K+, Cl-, HCO3- at Y point remained unchanged only when A, B and (or) a, b was kept in same side and proportion even with the change of blood flow and other parameters without sodium citrate as anticoagulant. Once any of the parameters (such as blood flow, replacement fluid volume, etc.) were adjusted in other infusion methods (such as different ratios, different directions of the same year, etc.), the calculation results at Y would vary, and the electrolyte concentration at Z would change accordingly. A change of dilution model or parameter would result in the change of the electrolyte concentration at Y and Z with sodium citrate as anticoagulant. The concentration of total calcium scarcely changed no matter in what model and parameters. CONCLUSIONS: All kinds of infusion ways could be included in the Excel model. The infusion results of all kinds of infusion matching could be intuitively evaluated. It is helpful for the medical staff to make a logical analysis and risk prediction in CVVH.

[Reason analysis of ineffective triggering caused by a continuous nebulization airflow in mechanical ventilation].

OBJECTIVE: To analyze the ineffective triggering caused by nebulization in the way of respiratory mechanics. METHODS: A test-lung and an oxygen-driven jet nebulizer were connected to the circuit in a PB840 ventilator. The test-lung was pulled outwards in manual way till an inspiration was effectively triggered separately in different flow-trigger modes [flow-trigger sensitivity (VTrig) 3 L/min and 5 L/min] and pressure-trigger modes [pressure-trigger sensitivity (PTrig) 2 cmH2O and 4 cmH2O, 1 cmH2O = 0.098 kPa] with the nebulizer being closed and opened in turn. The corresponding relationship and characteristics between the flow and pressure in the circuit under different triggering conditions were observed by adjusting the curve amplitude in the screen. The minimum alveolar pressure (Pa) which could cause an effective triggering and the variation span of Pa during the triggering period were analyzed in respiratory mechanics. RESULTS: (1) In flow-trigger mode: Pa was pulled down from positive end-expiratory pressure (PEEP) or intrinsic positive end-expiratory pressure (PEEPi) to "PEEP-VTrigR" (R meant airway resistance) without nebulization, and the span of Pa was "VTrigR" or "PEEPi-PEEP+VTrigR". Pa was pulled down from PEEP or PEEPi to "PEEP-(VTrig+N)R" (N meant nebulization airflow) with nebulization, and the span of Pa was "(VTrig+N)R" or "PEEPi-PEEP+(VTrig+N)R". (2) In pressure-trigger mode: Pa was pulled down from PEEP or PEEPi to "PEEP-PTrig-1R" without nebulization, and the span of Pa was "PTrig+1R" or "PEEPi-PEEP+PTrig+1R". Pa was pulled down from PEEP or PEEPi to "PEEP-PTrig-(N+1)R" with nebulization, and the span of Pa was "PTrig+(N+1)R" or "PEEPi-PEEP+PTrig+(N+1)R". CONCLUSIONS: Nebulization airflow increases the difficulty of inspiratory triggering in mechanical ventilation. PEEPi makes it more difficult.