ABSTRACT
BACKGROUND: This study aims to establish and validate a predictive nomogram for the short-term clinical outcomes of myasthenia gravis (MG) patients treated with low-dose rituximab. METHODS: We retrospectively reviewed 108 patients who received rituximab of 600 mg every 6 months in Huashan Hospital and Tangdu Hospital. Of them, 76 patients from Huashan Hospital were included in the derivation cohort to develop the predictive nomogram, which was externally validated using 32 patients from Tangdu Hospital. The clinical response is defined as a ≥ 3 points decrease in QMG score within 6 months. Both clinical and genetic characteristics were included to screen predictors via multivariate logistic regression. Discrimination and calibration were measured by the area under the receiver operating characteristic curve (AUC-ROC) and Hosmer-Lemeshow test, respectively. RESULTS: Disease duration (OR = 0.987, p = 0.032), positive anti-muscle-specific tyrosine kinase antibodies (OR = 19.8, p = 0.007), and genotypes in FCGR2A rs1801274 (AG: OR = 0.131, p = 0.024;GG:OR = 0.037, p = 0.010) were independently associated with clinical response of post-rituximab patients. The nomogram identified MG patients with clinical response with an AUC-ROC (95% CI) of 0.875 (0.798-0.952) in the derivation cohort and 0.741(0.501-0.982) in the validation cohort. Hosmer-Lemeshow test showed a good calibration (derivation: Chi-square = 3.181, p = 0.923; validation: Chi-square = 8.098, p = 0.424). CONCLUSIONS: The nomogram achieved an optimal prediction of short-term outcomes in patients treated with low-dose rituximab.
Subject(s)
Myasthenia Gravis , Nomograms , Rituximab , Humans , Rituximab/therapeutic use , Rituximab/administration & dosage , Myasthenia Gravis/drug therapy , Myasthenia Gravis/diagnosis , Male , Female , Middle Aged , Adult , Retrospective Studies , Immunologic Factors/administration & dosage , Immunologic Factors/therapeutic use , Treatment Outcome , Aged , Young Adult , Receptors, IgG/geneticsABSTRACT
INTRODUCTION/AIMS: GNE myopathy is a rare autosomal recessive disorder caused by pathogenic variants in the GNE gene, which is essential for the sialic acid biosynthesis pathway. Although over 300 GNE variants have been reported, some patients remain undiagnosed with monoallelic pathogenic variants. This study aims to analyze the entire GNE genomic region to identify novel pathogenic variants. METHODS: Patients with clinically compatible GNE myopathy and monoallelic pathogenic variants in the GNE gene were enrolled. The other GNE pathogenic variant was verified using comprehensive methods including exon 2 quantitative polymerase chain reaction and nanopore long-read single-molecule sequencing (LRS). RESULTS: A deep intronic GNE variant, c.862+870C>T, was identified in nine patients from eight unrelated families. This variant generates a cryptic splice site, resulting in the activation of a novel pseudoexon between exons 5 and 6. It results in the insertion of an extra 146 nucleotides into the messengerRNA (mRNA), which is predicted to result in a truncated humanGNE1(hGNE1) protein. Peanut agglutininï¼PNAï¼ lectin staining of muscle tissues showed reduced sialylation of mucin O-glycans on sarcolemmal glycoproteins. Notably, a third of patients with the c.862+870C>T variant exhibited thrombocytopenia. A common core haplotype harboring the deep intronic GNE variant was found in all these patients. DISCUSSION: The transcript with pseudoexon activation potentially affects sialic acid biosynthesis via nonsense-mediated mRNA decay, or resulting in a truncated hGNE1 protein, which interferes with normal enzyme function. LRS is expected to be more frequently incorporated in genetic analysis given its efficacy in detecting hard-to-find pathogenic variants.
Subject(s)
Exons , Introns , Multienzyme Complexes , Thrombocytopenia , Humans , Male , Female , Multienzyme Complexes/genetics , Exons/genetics , Introns/genetics , Adult , Thrombocytopenia/genetics , Distal Myopathies/genetics , Young Adult , Adolescent , Child , Muscle, Skeletal/metabolism , Muscle, Skeletal/pathology , Pedigree , Middle AgedABSTRACT
Organic molecules have been regarded as ideal candidates for near-infrared (NIR) optoelectronic active materials due to their customizability and ease of large-scale production. However, constrained by the intricate molecular design and severe energy gap law, the realization of optoelectronic devices in the second near-infrared (NIR (II)) region with required narrow band gaps presents more challenges. Herein, we have originally proposed a cocrystal strategy that utilizes intermolecular charge-transfer interaction to drive the redshift of absorption and emission spectra of a series BFXTQ (X = 0, 1, 2, 4) cocrystals, resulting in the spectra located at NIR (II) window and reducing the optical bandgap to â¼0.98 eV. Significantly, these BFXTQ-based optoelectronic devices can exhibit dual-mode optoelectronic characteristics. An investigation of a series of BFXTQ-based photodetectors exhibits detectivity (D*) surpassing 1013 Jones at 375 to 1064 nm with a maximum of 1.76 × 1014 Jones at 1064 nm. Moreover, the radiative transition of CT excitons within the cocrystals triggers NIR emission over 1000 nm with a photoluminescence quantum yield (PLQY) of â¼4.6% as well as optical waveguide behavior with a low optical-loss coefficient of 0.0097 dB/µm at 950 nm. These results promote the advancement of an emerging cocrystal approach in micro/nanoscale NIR multifunctional optoelectronics.
ABSTRACT
Surveys and retrospective studies have revealed considerable delays in diagnosing late-onset Pompe disease (LOPD) in China, where the contributing factors remain poorly represented. Our study analyzed the diagnostic journey of 34 LOPD patients seen at our neuromuscular clinic from 2005 to 2022. We defined diagnostic delay as the time from the onset of the first relevant symptoms and laboratory findings suggestive of LOPD to the eventual diagnosis, and we constructed a correlation matrix to assess relationships among these variables. The cohort consisted of 34 patients with an equal male-to-female ratio, and the mean age at diagnosis was 27.68 ± 10.03 years. We found the median diagnostic delay to be 5 years, with a range of 0.3 to 20 years, with 97.1% having been misdiagnosed previously, most commonly with "Type II Respiratory insufficiency" (36.7%). Notably, patients at earlier onset (mean age, 18.19 years vs. 31 years; p < 0.005) tended to have higher creatine kinase (CK) levels. Furthermore, 92.6% reported difficulty in sitting up from a supine position since childhood. Our research emphasizes the role of early indicators like dyspnea and difficulty performing sit-ups in adolescents for timely LOPD diagnosis and treatment initiation. The importance of early high-risk screening using dried blood spot testing cannot be overstated.
ABSTRACT
BACKGROUND: Oculopharyngodistal myopathy (OPDM) is a rare adult-onset neuromuscular disease, associated with CGG repeat expansions in the 5' untranslated region of LRP12, GIPC1, NOTCH2NLC and RILPL1. However, the genetic cause of a proportion of pathoclinically confirmed cases remains unknown. METHODS: A total of 26 OPDM patients with unknown genetic cause(s) from 4 tertiary referral hospitals were included in this study. Clinical data and laboratory findings were collected. Muscle samples were observed by histological and immunofluorescent staining. Long-read sequencing was initially conducted in six patients with OPDM. Repeat-primed PCR was used to screen the CGG repeat expansions in LOC642361/NUTM2B-AS1 in all 26 patients. RESULTS: We identified CGG repeat expansion in the non-coding transcripts of LOC642361/NUTM2B-AS1 in another two unrelated Chinese cases with typical pathoclinical features of OPDM. The repeat expansion was more than 70 times in the patients but less than 40 times in the normal controls. Both patients showed no leucoencephalopathy but one showed mild cognitive impairment detected by Montreal Cognitive Assessment. Rimmed vacuoles and p62-positive intranuclear inclusions (INIs) were identified in muscle pathology, and colocalisation of CGG RNA foci with p62 was also found in the INIs of patient-derived fibroblasts. CONCLUSIONS: We identified another two unrelated cases with CGG repeat expansion in the long non-coding RNA of the LOC642361/NUTM2B-AS1 gene, presenting with a phenotype of OPDM. Our cases broadened the recognised phenotypic spectrum and pathogenesis in the disease associated with CGG repeat expansion in LOC642361/NUTM2B-AS1.
Subject(s)
Muscular Dystrophies , Adult , Humans , Muscular Dystrophies/genetics , Phenotype , Intranuclear Inclusion Bodies/genetics , Trinucleotide Repeat Expansion/geneticsABSTRACT
Two-dimensional organic lateral heterostructures (2D OLHs) are attractive for the fabrication of functional materials. However, it is difficult to control the nucleation, growth and orientation of two distinct components. Here we report the combination of two methods-liquid-phase growth and vapour-phase growth-to synthesize 2D OLHs from perylene and a perylenecarboxaldehyde derivative, with a lateral size of ~20 µm and a tunable thickness ranging from 20 to 400 nm. The screw dislocation growth behaviour of the 2D crystals shows the spiral arrangement of atoms within the crystal lattice, which avoids volume expansion and contraction of OLH, thereby minimizing lateral connection defects. Selective control of the nucleation and sequential growth of 2D crystals leads to structural inversion of the 2D OLHs by the vapour-phase growth method. The resulting OLHs show good light-transport capabilities and tunable spatial exciton conversion, useful for photonic applications. This synthetic strategy can be extended to other families of organic polycyclic aromatic hydrocarbons, as demonstrated with other pyrene and perylene derivatives.
ABSTRACT
Global motion greatly increases the number of false alarms for object detection in video sequences against dynamic backgrounds. Therefore, before detecting the target in the dynamic background, it is necessary to estimate and compensate the global motion to eliminate the influence of the global motion. In this paper, we use the SURF (speeded up robust features) algorithm combined with the MSAC (M-Estimate Sample Consensus) algorithm to process the video. The global motion of a video sequence is estimated according to the feature point matching pairs of adjacent frames of the video sequence and the global motion parameters of the video sequence under the dynamic background. On this basis, we propose an inverse transformation model of affine transformation, which acts on each adjacent frame of the video sequence in turn. The model compensates the global motion, and outputs a video sequence after global motion compensation from a specific view for object detection. Experimental results show that the algorithm proposed in this paper can accurately perform motion compensation on video sequences containing complex global motion, and the compensated video sequences achieve higher peak signal-to-noise ratio and better visual effects.
ABSTRACT
Organic charge transfer (CT) cocrystals open a new door for the exploitation of low-dimensional near-infrared (NIR) emitters by a convenient self-assembly approach. However, research about the fabrication of sheet-like NIR-emitting microstructures that are significant for structural construction and integrated application is limited by the unidirectional molecular packing mode. Herein, via regulation of the biaxial intermolecular CT interaction, single-crystalline microsheets with remarkable NIR emission from 720 to 960 nm were synthesized via the solution self-assembly process of dithieno[3,2-b:2',3'-d]thiophene and 7,7,8,8-tetracyanoquinodimethane. The expected sheet-like structure is conducive to achieving a two-dimensional (2D) optical waveguide with an ultralow optical loss rate of 0.250 dB/µm at 860 nm. More significantly, these as-prepared organic microsheets with tunable thicknesses (h) from 100 to 1100 nm exhibit thickness-dependent NIR optical transportation performance. These findings could pave the way to a new class of low-dimensional NIR emitters for 2D photonics at telecom wavelengths.
ABSTRACT
We report multifunctional tendon-mimetic hydrogels constructed from anisotropic assembly of aramid nanofiber composites. The stiff nanofibers and soft polyvinyl alcohol in these anisotropic composite hydrogels (ACHs) mimic the structural interplay between aligned collagen fibers and proteoglycans in tendons. The ACHs exhibit a high modulus of ~1.1 GPa, strength of ~72 MPa, fracture toughness of 7333 J/m2, and many additional characteristics matching those of natural tendons, which was not achieved with previous synthetic hydrogels. The surfaces of ACHs were functionalized with bioactive molecules to present biophysical cues for the modulation of morphology, phenotypes, and other behaviors of attached cells. Moreover, soft bioelectronic components can be integrated on ACHs, enabling in situ sensing of various physiological parameters. The outstanding mechanics and functionality of these tendon mimetics suggest their further applications in advanced tissue engineering, implantable prosthetics, human-machine interactions, and other technologies.
Subject(s)
Nanofibers , Tissue Scaffolds , Humans , Tissue Scaffolds/chemistry , Hydrogels/chemistry , Tissue Engineering , Polyvinyl Alcohol/chemistry , Tendons , Nanofibers/chemistryABSTRACT
Bioprinting is a biofabrication technology which allows efficient and large-scale manufacture of 3D cell culture systems. However, the available biomaterials for bioinks used in bioprinting are limited by their printability and biological functionality. Fabricated constructs are often homogeneous and have limited complexity in terms of current 3D cell culture systems comprising multiple cell types. Inspired by the phenomenon that hydrogels can exchange liquids under the infiltration action, infiltration-induced suspension bioprinting (IISBP), a novel printing technique based on a hyaluronic acid (HA) suspension system to modulate the properties of the printed scaffolds by infiltration action, was described in this study. HA served as a suspension system due to its shear-thinning and self-healing rheological properties, simplicity of preparation, reusability, and ease of adjustment to osmotic pressure. Changes in osmotic pressure were able to direct the swelling or shrinkage of 3D printed gelatin methacryloyl (GelMA)-based bioinks, enabling the regulation of physical properties such as fiber diameter, micromorphology, mechanical strength, and water absorption of 3D printed scaffolds. Human umbilical vein endothelial cells (HUVEC) were applied as a cell culture model and printed within cell-laden scaffolds at high resolution and cell viability with the IISBP technique. Herein, the IISBP technique had been realized as a reliable hydrogel-based bioprinting technique, which enabled facile modulation of 3D printed hydrogel scaffolds properties, being expected to meet the scaffolds requirements of a wide range of cell culture conditions to be utilized in bioprinting applications.
Subject(s)
Bioprinting , Bioprinting/methods , Gelatin , Human Umbilical Vein Endothelial Cells , Humans , Hydrogels , Methacrylates , Printing, Three-Dimensional , Tissue Engineering/methods , Tissue ScaffoldsABSTRACT
The plasma membrane separates the interior of the cells from the extracellular fluid and protects the cell from disruptive external factors. Therefore, the self-repairing capability of the membrane is crucial for cells to maintain homeostasis and survive in a hostile environment. Here, we found that micron-sized membrane pores induced by cylindrical atomic force microscope probe puncture resealed significantly (~1.3-1.5 times) faster in drug-resistant non-small cell lung cancer (NSCLC) cell lines than in their drug-sensitive counterparts. Interestingly, we found that such enhanced membrane repairing ability was due to the overexpression of annexin in drug-resistant NSCLC cells. In addition, a further ~50% reduction in membrane resealing time (i.e., from ~23 s to ~13 s) was observed through the epithelial-mesenchymal-transition, highlighting the superior viability and potential of highly aggressive tumor cells using membrane resealing as an indicator for assessing the drug-resistivity and pathological state of cancer.
ABSTRACT
The ability to quantitatively monitor various cellular activities is critical for understanding their biological functions and the therapeutic response of cells to drugs. Unfortunately, existing approaches such as fluorescent staining and impedance-based methods are often hindered by their multiple time-consuming preparation steps, sophisticated labeling procedures, and complicated apparatus. The cost-effective, monolithic gallium nitride (GaN) photonic chip has been demonstrated as an ultrasensitive and ultracompact optical refractometer in a previous work, but it has never been applied to cell studies. Here, for the first time, the so-called GaN chipscope is proposed to quantitatively monitor the progression of different intracellular processes in a label-free manner. Specifically, the GaN-based monolithic chip enables not only a photoelectric readout of cellular/subcellular refractive index changes but also the direct imaging of cellular/subcellular ultrastructural features using a customized differential interference contrast (DIC) microscope. The miniaturized chipscope adopts an ultracompact design, which can be readily mounted with conventional cell culture dishes and placed inside standard cell incubators for real-time observation of cell activities. As a proof-of-concept demonstration, its applications are explored in 1) cell adhesion dynamics monitoring, 2) drug screening, and 3) cell differentiation studies, highlighting its potential in broad fundamental cell biology studies as well as in clinical applications.
Subject(s)
Gallium , Cell Adhesion , Gallium/chemistry , Incubators , RefractometryABSTRACT
The mechanism of extracellular ligand nano-geometry in ex vivo T cell activation for immunotherapy remains elusive. Herein, the authors demonstrate large aspect ratio (AR) of gold nanorods (AuNRs) conjugated on cell culture substrate enhancing both murine and human T cell activation through the nanoscale anisotropic presentation of stimulatory ligands (anti-CD3(αCD3) and anti-CD28(αCD28) antibodies). AuNRs with large AR bearing αCD3 and αCD28 antibodies significantly promote T cell expansion and key cytokine secretion including interleukin-2 (IL-2), interferon-gamma (IFN-γ), and tumor necrosis factor-alpha (TNF-α). High membrane tension observed in large AR AuNRs regulates actin filament and focal adhesion assembly and develops maturation-related morphological features in T cells such as membrane ruffle formation, cell spreading, and large T cell receptor (TCR) cluster formation. Anisotropic stimulatory ligand presentation promotes differentiation of naïve CD8+ T cells toward the effector phenotype inducing CD137 expression upon co-culture with human cervical carcinoma. The findings suggest the importance of manipulating extracellular ligand nano-geometry in optimizing T cell behaviors to enhance therapeutic outcomes.
Subject(s)
CD8-Positive T-Lymphocytes , Nanoparticles , Animals , CD3 Complex/pharmacology , CD8-Positive T-Lymphocytes/metabolism , Humans , Interleukin-2/metabolism , Ligands , Lymphocyte Activation , MiceABSTRACT
Metastasis plays a crucial role in tumor development, however, lack of quantitative methods to characterize the capability of cells to undergo plastic deformations has hindered the understanding of this important process. Here, a microfluidic system capable of imposing precisely controlled cyclic deformation on cells and therefore probing their viscoelastic and plastic characteristics is developed. Interestingly, it is found that significant plastic strain can accumulate rapidly in highly invasive cancer cell lines and circulating tumor cells (CTCs) from late-stage lung cancer patients with a characteristic time of a few seconds. In constrast, very little irreversible deformation is observed in the less invasive cell lines and CTCs from early-stage lung cancer patients, highlighting the potential of using the plastic response of cells as a novel marker in future cancer study. Furthermore, author showed that the observed irreversible deformation should originate mainly from cytoskeleton damage, rather than plasticity of the cell nucleus.
Subject(s)
Lung Neoplasms , Neoplastic Cells, Circulating , Cell Count , Cell Nucleus , Humans , Lung Neoplasms/pathology , Microfluidics/methods , Neoplasm Metastasis/pathology , Neoplastic Cells, Circulating/pathologyABSTRACT
Dynamic hydrogels cross-linked by weak and reversible physical interactions enhance the 3-dimensional (3D) spreading and mechanosensing abilities of encapsulated cells in a matrix. However, the highly dynamic nature of these physical cross-links also results in low mechanical stiffness in the hydrogel network and high tether compliance of the cell adhesion motifs attached to the network. The resulting low force feedback of the soft hydrogel network impedes the efficient activation of mechanotransduction signalling in the encapsulated cells. Herein, we demonstrate that the chemical incorporation of acryloyl nanoparticle-based cross-linkers creates regionally stiff network structures in the dynamic supramolecular hydrogels without compromising the dynamic properties of the cell-adaptable inter-nanoparticle hydrogel network. The obtained dynamic hydrogels with a heterogeneous hydrogel network topology expedite the development of adhesion structures, 3D spreading, and mechanosensing of the encapsulated stem cells, as evidenced by the upregulated expression of key biomarkers such as vinculin, FAK, and YAP. This enhanced spreading and mechanotransduction promotes the osteogenic differentiation of the encapsulated stem cells. In contrast, doping with physically entrapped nanoparticles or molecular cross-linkers (PEGDA) cannot locally reinforce the dynamic hydrogel network and therefore fails to facilitate cell mechanosensing or differentiation in the 3D hydrogels. We further show that the dynamic hydrogels with a locally stiffened network promote the in situ regeneration of bone defects in an animal model. Our findings provide valuable insights into the design of the supramolecular dynamic hydrogels with biomimetic hierarchical biomechanical structures as the optimized carrier material for stem cell-based therapies.
Subject(s)
Hydrogels , Osteogenesis , Animals , Bone Regeneration , Mechanotransduction, Cellular , Stem CellsABSTRACT
As one of the most important cellular compartments, the nucleus contains genetic materials and separates them from the cytoplasm with the nuclear envelope (NE), a thin membrane that is susceptible to deformations caused by intracellular forces. Interestingly, accumulating evidence has also indicated that the morphology change of NE is tightly related to nuclear mechanotransduction and the pathogenesis of diseases such as cancer and Hutchinson-Gilford Progeria Syndrome. Theoretically, with the help of well-designed experiments, significant progress has been made in understanding the physical mechanisms behind nuclear shape transformation in different cellular processes as well as its biological implications. Here, we review different continuum-level (i.e., energy minimization, boundary integral and finite element-based) approaches that have been developed to predict the morphology and shape change of the cell nucleus. Essential gradients, relative advantages and limitations of each model will be discussed in detail, with the hope of sparking a greater research interest in this important topic in the future.
ABSTRACT
A new regeneration method of ion exchange resin named Adjacent Bed Electrically Regenerated Ion-exchange (ABERI) was proposed to eliminate the environmental impact of traditional chemical regeneration and improve the economy of replacing chemical regeneration with electrical regeneration. The desalting operation of ABERI was the same as the conventional mixed bed. When the resins were exhausted, anion and cation resins were separated and then packed in a dedicated regenerator adjacently. The resins were regenerated by the H+ and OH- ions produced from a pair of electrodes installed on both sides of the resin bed. By optimizing the regeneration time, current, and feed water flow rate, the energy consumption of ABERI was 0.38 kWh/m3 water; that is, 54% of that of another electrical regeneration technology, membrane-free electrodeionization (MFEDI). Compared with MFEDI, the quality and quantity of purified water produced after regeneration were improved. In ABERI, the average conductivity and the volume (times of bed volumes) of the purified water are 0.9 µS/cm and 109; that is, 75 and 133% of that of MFEDI, respectively. The preliminary economic analysis showed that ABERI offers the potential to regenerate ion exchange resin in an eco-friendly and cost-effective manner.
Subject(s)
Water Pollutants, Chemical , Water Purification , Ion Exchange , Ion Exchange Resins , Water , Water Pollutants, Chemical/analysisABSTRACT
A novel electroporation system was developed to introduce transient membrane pores to cells in a spatially and temporally controlled manner, allowing us to achieve fast electrotransfection and live cell staining as well as to systematically interrogate the dynamics of the cell membrane. Specifically, using this platform, we showed that both reversible and irreversible electroporation could be induced in the cell population, with nano-sized membrane pores in the former case being able to self-reseal in ~10 min. In addition, green fluorescent protein(GFP)-vinculin plasmid and 543 phalloidin have been delivered successively into fibroblast cells, which enables us to monitor the distinct roles of vinculin and F-actin in cell adhesion and migration as well as their possible interplay during these processes. Compared to conventional bulk electroporation and staining methods, the new system offers advantages such as low-voltage operation, cellular level manipulation and testing, fast and adjustable transfection/staining and real-time monitoring; the new system therefore could be useful in different biophysical studies in the future.
ABSTRACT
A Sr-based metal-organic framework (MOF) is introduced as ketoprofen carrier to form a comprehensive system for treating osteoarthritis (OA), and the drug loading amount and release rate is investigated. Structural characterization of the samples showed that Sr/PTA-MOF had good crystal morphology and structure, and chemical and thermal stability. Ketoprofen was successfully loaded on the MOF carrier, which had been identified by high performance liquid chromatography (HPLC) and thermogravimetric analysis (TGA). The release experiment manifested that more than 90% of ketoprofen released from Sr/PTA-MOF after 24 h, and ketoprofen delivery was mainly governed by the Higuchi model. Furthermore, cytotoxicity experiment manifested that synthesized MOF carrier had no poisonous effect on OA chondrocytes, which provided a preliminary foundation for the realization of comprehensive treating OA.