High-Performance Wearable Organic Photodetectors by Molecular Design and Green Solvent Processing for Pulse Oximetry and Photoplethysmography.

White-light detection from the visible to the near-infrared region is central to many applications such as high-speed cameras, autonomous vehicles, and wearable electronics. While organic photodetectors (OPDs) are being developed for such applications, several challenges must be overcome to produce scalable high-detectivity OPDs. This includes issues associated with low responsivity, narrow absorption range, and environmentally friendly device fabrication. Here, an OPD system processed from 2-methyltetrahydrofuran (2-MeTHF) sets a record in light detectivity, which is also comparable with commercially available silicon-based photodiodes is reported. The newly designed OPD is employed in wearable devices to monitor heart rate and blood oxygen saturation using a flexible OPD-based finger pulse oximeter. In achieving this, a framework for a detailed understanding of the structure-processing-property relationship in these OPDs is also developed. The bulk heterojunction (BHJ) thin films processed from 2-MeTHF are characterized at different length scales with advanced techniques. The BHJ morphology exhibits optimal intermixing and phase separation of donor and acceptor moieties, which facilitates the charge generation and collection process. Benefitting from high charge carrier mobilities and a low shunt leakage current, the newly developed OPD exhibits a specific detectivity of above 1012  Jones over 400-900 nm, which is higher than those of reference devices processed from chlorobenzene and ortho-xylene.

Additive-free molecular acceptor organic solar cells processed from a biorenewable solvent approaching 15% efficiency.

We report on the use of molecular acceptors (MAs) and donor polymers processed with a biomass-derived solvent (2-methyltetrahydrofuran, 2-MeTHF) to facilitate bulk heterojunction (BHJ) organic photovoltaics (OPVs) with power conversion efficiency (PCE) approaching 15%. Our approach makes use of two newly designed donor polymers with an opened ring unit in their structures along with three molecular acceptors (MAs) where the backbone and sidechain were engineered to enhance the processability of BHJ OPVs using 2-MeTHF, as evaluated by an analysis of donor-acceptor (D-A) miscibility and interaction parameters. To understand the differences in the PCE values that ranged from 9-15% as a function of composition, the surface, bulk, and interfacial BHJ morphologies were characterized at different length scales using atomic force microscopy, grazing-incidence wide-angle X-ray scattering, resonant soft X-ray scattering, X-ray photoelectron spectroscopy, and 2D solid-state nuclear magnetic resonance spectroscopy. Our results indicate that the favorable D-A intermixing that occurs in the best performing BHJ film with an average domain size of ∼25 nm, high domain purity, uniform distribution and enhanced local packing interactions - facilitates charge generation and extraction while limiting the trap-assisted recombination process in the device, leading to high effective mobility and good performance.

Design of Furan-Based Acceptors for Organic Photovoltaics.

We explore a series of furan-based non-fullerene acceptors and report their optoelectronic properties, solid-state packing, photodegradation mechanism and application in photovoltaic devices. Incorporating furan building blocks leads to the expected enhanced backbone planarity, reduced band gap and red-shifted absorption of these acceptors. Still, their position in the molecule is critical for stability and device performance. We found that the photodegradation of these acceptors originates from two distinct pathways: electrocyclic photoisomerization and Diels-Alder cycloaddition of singlet oxygen. These mechanisms are of general significance to most non-fullerene acceptors, and the photostability depends strongly on the molecular structure. Placement of furans next to the acceptor termini leads to better photostability, well-balanced hole/electron transport, and significantly improved device performance. Methylfuran as the linker offers the best photostability and power conversion efficiency (>14 %), outperforming all furan-based acceptors reported to date and all indacenodithiophene-based acceptors. Our findings show the possibility of photostable furan-based alternatives to the currently omnipresent thiophene-based photovoltaic materials.

Understanding the Photovoltaic Behavior of A-D-A Molecular Semiconductors through a Permutation of End Groups.

The facile synthesis of a series of benzodithiophene (BDT)- and indacenodithiophene (IDT)-based A-D-A oligomers with different end groups is reported, and their properties are studied by optical spectroscopy, electrochemistry, and density functional theory calculations. The permutation of central and terminal units tunes the optoelectronic properties and photovoltaic device characteristics in a predictable way, aiding in the rational design of small molecule semiconducting materials. Among the three rhodanine-derived terminal groups, N-alkylthiazolonethione revealed the strongest electron-withdrawing character, resulting in the lowest band gap, the highest stability, and the best photovoltaic device performance. The crystallographic analysis of two IDT derivatives yielded a highly unusual three-dimensional packing of the conjugated backbone, which is likely responsible for the remarkable photovoltaic performance of such A-D-A semiconductors.

Pretreatment of a primary and secondary sludge blend at different thermal hydrolysis temperatures: Impacts on anaerobic digestion, dewatering and filtrate characteristics.

A study was performed to evaluate the effect of thermal hydrolysis pretreatment (THP) temperature on subsequent digestion performance and operation, as well as downstream parameters such as dewatering and cake quality. A blend of primary and secondary solids from the Blue Plains treatment plant in Washington, DC was dewatered to about 16% total solids (TS), and thermally hydrolyzed at five different temperatures 130, 140, 150, 160, 170 °C. The thermally hydrolyzed solids were then fed to five separate, 10 L laboratory digesters using the same feed concentration, 10.5% TS and a solids retention time (SRT) of 15 days. The digesters were operated over a six month period to achieve steady state conditions. The higher thermal hydrolysis temperatures generally improved the solids reduction and methane yields by about 5-6% over the temperature range. The increased temperature reduced viscosity of the solids and increased the cake solids after dewatering. The dissolved organic nitrogen and UV absorbance generally increased at the higher THP temperatures. Overall, operating at a higher temperature improved performance with a tradeoff of higher dissolved organic nitrogen and UV adsorbing materials in the return liquor.

Molecular weight effect on the efficiency of polymer solar cells.

In this study, we report the investigation of the influence of molecular weight (MW) on power conversion efficiency (PCE) of bulk heterojunction (BHJ) polymer solar cells (PSCs). It was found that PCEs of PSCs fabricated by poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PTB7) blended with [6,6]-phenyl-C71 butyric acid methyl ester (PC71BM) as the active layer, are significantly enhanced from 5.41 to 6.27 and 8.50% along with the MW of PTB7 increased from 18 to 40 and 128 kg/mol, respectively. This enhancement is attributed to the enhanced light absorption and increased charge carrier mobility of PTB7 with high MW, and a proper phase separation in BHJ composite of PTB7:PC71BM interpenetrating network. All these results demonstrate that the MW of donor polymer plays an important role in the performance of BHJ PSCs.

Variable-force tapping atomic force microscopy as a tool in the characterization of organic devices.

A common method for characterizing the phase separation of materials in mixtures is tapping mode atomic force microscopy (AFM). However, AFM results are influenced by surface-energy effects and the employed tapping force, and it might therefore be difficult to attain correct information regarding the bulk with such a surface-imaging technique. In this work, we present a way of imaging material phase separation in an improved manner by recording a series of AFM images at different tapping force. More specifically, we have employed the variable-force AFM method on organic mixtures, comprising a conjugated polymer (MEH-PPV) and an ion-conducting polymer electrolyte (PEO-XCF(3)SO(3), X=Li, K, Rb), and we demonstrate that it is capable of reversibly sampling such materials not only on the surface, but also (indirectly) in the topmost part of the bulk. The analysis of the evolution of AFM phase images allows us to (indirectly) gain information about the bulk-phase separation of materials. We find that the variable-force AFM results correlate well with the device performance of light-emitting electrochemical cells employing such organic mixtures as the active material.