In situ cleaning of foulants by gas scouring on the membrane-electrode in an electro-membrane bioreactor.

Low-maintenance membrane cleaning is essential for the stable operation of membrane bioreactors. This work proposes an in-situ electrical-cleaning method using an electro-MBR. When the applied bias was transiently increased, the membrane flux recovered rapidly because of the scouring effect from gas evolution reactions. The exfoliation of the cake layer induced by gas scouring played a major role in mitigating membrane fouling, recovering the transmembrane pressure (TMP) by 88.6 % under optimal conditions. Membrane modules did not require replacement during the operation period due to the efficacy of electrical cleaning, with the TMP varying between 37.5 % and 62.5 % of the ultimate pressure requiring change of the membrane modules. Despite the increase in power consumption of 0.66 Wh·m-3 due to the additional applied bias, there was no need for chemical additives or manual maintenance. Therefore, the electrical cleaning method enhanced the service life and reduced the maintenance costs of the electro-MBR.

Non-Covalent Interactions between Polyvinyl Chloride and Conjugated Polymers Enable Excellent Mechanical Properties and High Stability in Organic Solar Cells.

The incorporation of insulating polymers into conjugated polymers has been widely explored as a strategy to improve mechanical properties of flexible organic electronics. However, phase separation due to the immiscibility of these polymers has limited their effectiveness. In this study, we report the discovery of multiple non-covalent interactions that enhances the miscibility between insulating and conjugated polymers, resulting in improved mechanical properties. Specifically, we have added polyvinyl chloride (PVC) into the conjugated polymer PM6 and observed a significant increase in solution viscosity, indicative of favorable miscibility between these two polymers. This phenomenon has been rarely observed in other insulating/conjugated polymer composites. Thin films of PM6/PVC exhibit a much-improved crack-onset strain of 19.35 %, compared to 10.12 % for pristine PM6 films. Analysis reveal that a "cyclohexyl-like" structure formed through dipole-dipole interactions and hydrogen bonding between PVC and PM6 acted as a cross-linking site in the thin films, leading to improved mechanical properties. Moreover, PM6/PVC blend films have demonstrated excellent thermal and bending stability when applied as an electron donor in organic solar cells. These findings provide new insights into non-covalent interactions that can be utilized to enhance the properties of conjugated polymers and may have potential applications in flexible organic electronics.

13% Single-Component Organic Solar Cells based on Double-Cable Conjugated Polymers with Pendent Y-Series Acceptors.

Double-cable conjugated polymers with pendent electron acceptors, including fullerene, rylene diimides, and nonfused acceptors, have been developed for application in single-component organic solar cells (SCOSCs) with efficiencies approaching 10%. In this work, Y-series electron acceptors have been firstly incorporated into double-cable polymers in order to further improve the efficiencies of SCOSCs. A highly crystalline Y-series acceptor based on quinoxaline core and the random copolymerized strategy are used to optimize the ambipolar charge transport and the nanophase separation of the double-cable polymers. As a result, an efficiency of 13.02% is obtained in the random double-cable polymer, representing the highest performance in SCOSCs, while the regular double-cable polymer only provides a low efficiency of 2.75%. The significantly enhanced efficiencies are attributed to higher charge carrier mobilities, better ordering conjugated backbones and Y-series acceptors in random double-cable polymers.

Spatial Distribution and Assessment of the Human Health Risks of Heavy Metals in a Retired Pharmaceutical Industrial Area, Southwest China.

Heavy metals pollution in pharmaceutical industries received increasing attention. A total of 94 soil samples were collected in this study. Results showed the mean contents of Hg, Cd, As, Pb, Ni and Cu were 0.21, 0.26, 9.59, 55.06, 51.52 and 50.81 mg·kg-1, respectively. The spatial distribution of metals in topsoil largely attributed to the pharmaceutical production process. The distribution of Hg and As were related to the production of medical absorbent cotton. While Ni was related to the fuel supply of Ni-rich coal. Cr, Cu and Pb mainly distributed in the process which they were used as catalysts. The vertical migration of metals was complex in soil. To a great extent, it was related to the texture of the soil and the properties of metals in this filed. The total non-cancer and cancer human health risk were within the limits of USEPA (10-6 a-1). This demonstrated the health risks of individual's exposure to heavy metals in this factory was acceptable.

Insulating Polymers as Additives to Bulk-Heterojunction Organic Solar Cells: The Effect of Miscibility.

Adding insulating polymers to conjugated polymers is an efficient strategy to tailor their mechanical properties for flexible organic electronics. In this work, we selected two insulating polymers as additives for high-performance photoactive layers and investigated the mechanical and photovoltaic properties in organic solar cells (OSCs). The insulating polymers were found to reduce the electron mobilities in the photoactive layers, and hence the power conversion efficiencies were significantly decreased. More importantly, we found that the insulating polymers exhibited negative effect on the mechanical properties of the photoactive layers, with reduced Young's modulus and low crack onset strains. Further studies revealed that the insulating polymers had poor miscibility with the photoactive layers, providing large domains and more cavities in blend thin films, which act as negative effect for the tensile test. The studies indicate that rational selection of insulating polymers, especially enhancing the non-covalent interaction with the photoactive layers, will be critically important for the stretchable OSCs.

Mechanical Robust Flexible Single-Component Organic Solar Cells.

Owing to the advantages of being lightweight and compatible with surfaces with different deformations, flexible organic solar cells (OSCs) have broad scopes of applications, including wearable electronics and portable devices. Most flexible OSCs focus on the two-component bulk-heterojunction (BHJ) photo-active layers, but they usually suffer from degradation problems both in efficiency and mechanical durability derived from the limited phase stability under mechanical and thermal stress. Whereas, single-component organic solar cells (SCOSCs) based on the double-cable conjugated polymer are supposed to possess excellent mechanical robustness and long-term stability. Here, the first flexible SCOSCs based on a double-cable polymer are fabricated on a transparent silver nanowires (AgNWs) electrode on a plastic foil. Impressively, the obtained flexible SCOSCs exhibited a power conversion efficiency (PCE) of 7.21%. The flexible SCOSCs are further demonstrated to possess superior mechanical robustness (>95% retention after 1000 bending cycles) and storage stability (>97% retention after 430 h in nitrogen atmosphere) compared to several BHJ-type flexible OSCs. The pseudo-free-standing tensile test and morphology investigation are conducted to reveal the distinction in mechanical durability of the single-component polymer film and the BHJ-type films. Besides, ultraflexible SCOSCs are also fabricated, indicating the application prospect and superiority in flexible devices and wearable electronic products.

Melatonin-assisted phytoremediation of Pb-contaminated soil using bermudagrass.

Exogenous application of melatonin to plants is a promising approach for assisted phytoremediation of soil lead (Pb). In this study, we investigated the effects of foliar applications of melatonin to mature bermudagrass (Cynodon dactylon (L.) Pers.), a fast-growing perennial with potential as a non-hyperaccumulator plant for Pb phytoremediation. Following exposure to Pb (3000 mg kg-1) for 30 days, decreases in biomass and chlorophyll production, degradation of thylakoid membranes, reduced photosynthesis and PSII (reaction center of photosystem II) efficiency, and elevated oxidative stress were found. Foliar applications of melatonin to Pb-stressed bermudagrass mitigated these negative effects, restoring photosynthetic pigments and chloroplast ultrastructure, subsequently improving photosynthesis and photochemistry efficiency of PSII. Exogenous melatonin also eliminated the excessive accumulations of reactive oxygen species (ROS) and methylglyoxal (MG) which associated with cellular redox homeostasis by improving ascorbic acid (AsA) and reduced glutathione (GSH) contents, redox status of GSH/GSSG (oxidative glutathione), and key enzymes activities in both AsA-GSH and glyoxalase systems. Ultimately, treating bermudagrass plants with exogenous melatonin elevated biomass production and disproportionally greater Pb translocation to roots and senescent leaves. This collectively resulted in 21% greater recovery of Pb compared to Pb-stressed bermudagrass lacking melatonin application. Overall, results from this study demonstrated the beneficial roles of melatonin for improving the effectiveness of bermudagrass as a non-hyperaccumulator plant for soil Pb phytoremediation.

Effect of 24-epibrassinolide on reactive oxygen species and antioxidative defense systems in tall fescue plants under lead stress.

Lead is one of the most hazardous pollutants to both the environment as well as human beings. As one of the approaches to enhance phytoremediation, brassinosteroids are predicted as a potential candidate phytohormone for assisted phytoremediation. Few studies have focused on the physiological regulations of tall fescue plants (Festuca arundinacea Schreb.), a potential phytoremediation species, for its responses to applications of brassinosteroids under lead stress. Therefore, the objectives of this study were to investigate the effects of foliar application of 24-epibrassinolide, a brassinosteroids analogue, on reactive oxygen species accumulation and antioxidative defense systems of tall fescue when exposed to lead, and ultimately its potential to be used in phytoremediation. When exposed to lead (1000 mg/kg) for 80 d, decreases in shoot and root biomass of tall fescue biomass as well as chlorophyll and carotenoid productions were found. Foliar application of 24-epibrassinolide at three rates and five applications every 7 d improved the biomass of both shoots and roots, and increased the photosynthetic pigments. The improved lead tolerance in tall fescue plants after 24-epibrassinolide applications was associated with reduced H2O2 and O2.- accumulations and increased antioxidative enzyme activities including superoxide dismutase, catalase, and guaiacol peroxidase. Additionally, osmoprotectants increased and lipid peroxidation decreased. Ultimately, foliar applications of 24-epibrassinolide enhanced the lead recovery rate of tall fescue plants, proving its potential role in phytoremediation for soil contaminated with heavy metals such as lead.

YKL107W from Saccharomyces cerevisiae encodes a novel aldehyde reductase for detoxification of acetaldehyde, glycolaldehyde, and furfural.

The aldehyde reductases from the short-chain dehydrogenase/reductase (SDR) family were identified as a series of critical enzymes for the improved tolerance of Saccharomyces cerevisiae to the aldehydes by catalyzing the detoxification reactions of aldehydes. Herein, we report that a novel aldehyde reductase Ykl107wp deduced from YKL107W from S. cerevisiae belongs to the classical SDR group and can catalyze the reduction reactions of acetaldehyde (AA), glycolaldehyde (GA), furfural (FF), formaldehyde (FA), and propionaldehyde (PA) but cannot reduce the six representative ketones. Ykl107wp displayed the best maximum velocity (Vmax), catalytic rate constant (Kcat), catalytic efficiency (Kcat/Km), and highest affinity (Km) to acetaldehyde. The optimum pH of Ykl107wp was 6.0 for the reduction of AA and 7.0 for the reduction of GA and FF, and the optimum temperatures were 40, 35, and 30 °C for the reduction of AA, GA, and FF, respectively. Ykl107wp for the reduction of AA was greatly affected by metal ions, chemical additives, and salts and showed poor thermal and pH stability, but its stability was slightly affected by a substrate. Ykl107wp was localized in endoplasmic reticulum and prevented the yeast cells from damage caused by furfural via the detoxification of furfural to furfural alcohol. This research provides guidelines for the study of uncharacterized classical SDR aldehyde reductases and exploration of their protective mechanisms on the corresponding organelles.

Anatase titania coated CNTs and sodium lignin sulfonate doped chitosan proton exchange membrane for DMFC application.

Anatase titania coated CNTs (TCNTs) and sodium lignin sulfonate (SLS) were introduced to chitosan membrane to improve the conductivity based on extra proton transfer channels built by TCNTs and sulfonate groups supplied by SLS. Water uptake, mechanical properties, oxidation stability and methanol-rejecting property of composite membranes were characterized. The results show that TCNTs and SLS doped membranes have enhanced conductivity and the sample with 5% TCNTs and 2% SLS doped (CS/TCNT-5/SLS-2) achieved a conductivity of 0.0367 S cm-1 at room temperature and 0.0647 S cm-1 at 60 °C, which is much higher than pure chitosan membrane. Moreover, with TCNTs incorporation, the mechanical properties, oxidation stability and methanol-rejecting property also improved. Overall, selectivity of CS/TCNT-5/SLS-2 sample achieved 28.2 × 104 S s cm-3 which is much higher than 3.8 × 104 S s cm-3 of pure chitosan membrane. Thus, with enhanced properties, chitosan composite membrane could be promising as proton exchange membrane (PEM) in the use of direct methanol fuel cell (DMFC).

Exogenous melatonin improves lead tolerance of bermudagrass through modulation of the antioxidant defense system.

Lead (Pb) is a major anthropogenic contaminant that can be devastating on both animals and plants. It is essential to develop methods to decrease the Pb contaminant in soil by phytoremediation using plants that are tolerance to Pb. In this study, we investigated the tolerance of bermudagrass (Cynodon dactylon (L.) Pers.) and the role of exogenous application of melatonin for improving its tolerance to Pb. Bermudagrass growing in soil treated with Pb at 1,000 or 2,000 mg kg-1 were assessed with or without melatonin pretreatment at various concentrations. Under Pb stresses, bermudagrass plants showed stunted growth and increased cellular oxidative stress. Pre-treating bermudagrass plants with melatonin at 20 or 100 µM significantly increased the activities of antioxidant enzymes (superoxide dismutase, catalase, peroxidase, ascorbate peroxidase, and glutathione reductase) and the contents of non-enzymatic antioxidants (ascorbic acid and glutathione), and decreased reactive oxygen species (hydrogen peroxide, superoxide), and ultimately reduced membrane lipid peroxidation and permeability. These changes contributed to improvements in the water status, photosynthetic pigment synthesis, and biomass production of bermudagrass under Pb stresses. Our study provides the first evidence that melatonin may be a promising tool for enhancing Pb tolerance and phytoremediation potential of bermudagrass.

[A case control study on the treatment of unstable distal radius fractures with internal and external fixation].

OBJECTIVE: To explore the clinical effects of diaplastic external fixator on the treatment of unstable fractures of distal radius. METHODS: A clinical data of 60 patients with unstable fractures of distal radius admitted to Wangjing Hospital from August 2005 to September 2009 were retrospectively analyzed with the paired design. According to the paired design, 60 patients were equally divided into two groups (internal fixation group and external fixation group), which were respectively treated with open reduction and steel plate internal fixation (internal fixation group) or closed reduction and external fixation (external fixation group), including 8 males and 52 females, with an average age of 60.27 years ranging from 34 to 85 years. Left side was in 33 cases and right side was in 27 cases. All fractures were closed and caused by hand supporting when falling down. According to AO classification, type A3 was in 22 cases, type B2 was in 4 cases, type B3 was in 2 cases, type C1 was in 20 cases, type C2 was in 8 cases, type C3 was in 4 cases. Palmar flexion, dorsiflexion, radial deviation, ulnar deviation, pronation, supination, grip strength, radial angle, radial length, volar tilt were observed before and after operation. RESULTS: All the patients were followed up from 12 to 18 months with an average of 15.4 months. The radial length was (4.85 +/- 2.75) mm,volar tilt (14.66 +/- 10.77) degrees, radial angle (7.90 +/- 4.70) degrees in the external fixation group,while those were (4.29 +/- 1.53) mm, (14.39 +/- 5.01) degrees, (6.19 +/- 3.15) degrees in the internal fixation group, but with no statistical significance (P>0.05). Function comparison of internal and external fixation group, P-value of every function is more than 0.05 or equal to 0.05, with no statistical significance except for supination and radial deviation. The functions of wrist joints were evaluated according to Batra scoring system at 1 year after operation. The average radiological scores of external fixation group was 86.27,in which 15 cases were excellent, 11 good, 1 fair,3 poor,while the average functional scores was 94.93, and all the cases were excellent. The average radiological scores of internal fixation group was 91.27, 16 cases were excellent, 12 good, 2 fair, while the average functional scores was 94.23, in which all the cases were excellent. CONCLUSION: Compared with the open reduction and steel plate fixation, the unstable fractures of distal radius treating by diaplastic external fixator can be achieved a similar result, with no statistical significance.

[Image processing system of visual prostheses based on digital signal processor DM642].

This paper employed a DSP platform to create the real-time and portable image processing system, and introduced a series of commonly used algorithms for visual prostheses. The results of performance evaluation revealed that this platform could afford image processing algorithms to be executed in real time.