Improved Charge Injection Balance in Quantum Dot Light-Emitting Diodes through Interface Texture.

The existing methods to improve the charge balance of quantum dot light-emitting diodes (QLEDs) rely on energy-level matching, but these approaches have been limited by material availability and Fermi-level pinning. Here, we propose a solution that does not require changes to the materials' electronic properties. By using nanoimprinting technology to texture the interface between the hole-transporting layer (HTL) and colloidal quantum dot (CQD) layer, we can increase the HTL-CQD contact area. This significantly enhances the hole injection rate while keeping the electron injection rate essentially unchanged. Compared with the conventional planar structure, QLEDs with textured HTL exhibit lower luminance threshold voltage, significantly higher external quantum efficiency at low bias voltages, improved operational stability, and a similar Lambertian factor. Comprehensive measurements confirm that the HTL-CQD interface texture allows more efficient hole injection into CQDs to occur under lower bias, resulting in less CQD charging and more efficient exciton recombination.

Phytochemicals targeting ferroptosis in cardiovascular diseases: Recent advances and therapeutic perspectives.

Ferroptosis is a form of iron-dependent regulatory cell death that is related to the pathogenesis and progression of various cardiovascular diseases, such as arrhythmia, diabetic cardiomyopathy, myocardial infarction, myocardial ischemia/reperfusion injury, and heart failure. This makes it a promising therapeutic target for cardiovascular diseases. It is interesting that a significant number of cardiovascular disease treatment drugs derived from phytochemicals have been shown to target ferroptosis, thus producing cardioprotective effects. This study offers a concise overview of the initiation and control mechanisms of ferroptosis. It discusses the core regulatory factors of ferroptosis as potential new therapeutic targets for various cardiovascular diseases, elucidating how ferroptosis influences the progression of cardiovascular diseases. In addition, this review systematically summarizes the regulatory effects of phytochemicals on ferroptosis, emphasizing their potential mechanisms and clinical applications in treating cardiovascular diseases. This study provides a reference for further elucidating the molecular mechanisms of phytochemicals in treating cardiovascular diseases. This may accelerate their application in the treatment of cardiovascular diseases and is worth further research in this field.

Hole-Injection-Barrier Effect on the Degradation of Blue Quantum-Dot Light-Emitting Diodes.

Inefficient hole injection presents a major challenge in achieving stable and commercially viable solution-processed blue electroluminescent devices. Here, we conduct an in-depth study on quantum-dot light-emitting diodes (QLEDs) to understand how the energy levels of common electrodes and hole-transporting layers (HTL) affect device degradation. Our experimental findings reveal a design rule that may seem nonintuitive: combining an electrode and HTL with matched energy levels is most effective in preventing voltage rise and irreversible luminance decay, even though it causes a significant energy offset between the HTL and emissive quantum dots. Using an iterative electrostatic model, we discover that the positive outcomes, including a T95 lifetime of 109 h (luminance = 1000 nits, CIE-y = 0.087), are due to the enhanced p-type doping in the HTL rather than the assumed reduction in barrier heights. Furthermore, our modified hole injection dynamics theory, which considers distributed density-of-states, shows that the increased HTL/quantum-dot energy offset is not a primary concern because the effective barrier height is significantly lower than conventionally assumed. Following this design rule, we expect device stability to be enhanced considerably.

Large depth-of-field ultra-compact microscope by progressive optimization and deep learning.

The optical microscope is customarily an instrument of substantial size and expense but limited performance. Here we report an integrated microscope that achieves optical performance beyond a commercial microscope with a 5×, NA 0.1 objective but only at 0.15 cm3 and 0.5 g, whose size is five orders of magnitude smaller than that of a conventional microscope. To achieve this, a progressive optimization pipeline is proposed which systematically optimizes both aspherical lenses and diffractive optical elements with over 30 times memory reduction compared to the end-to-end optimization. By designing a simulation-supervision deep neural network for spatially varying deconvolution during optical design, we accomplish over 10 times improvement in the depth-of-field compared to traditional microscopes with great generalization in a wide variety of samples. To show the unique advantages, the integrated microscope is equipped in a cell phone without any accessories for the application of portable diagnostics. We believe our method provides a new framework for the design of miniaturized high-performance imaging systems by integrating aspherical optics, computational optics, and deep learning.

Two-dimensional biomechanical finite element modeling of the pelvic floor and prolapse.

We developed the pelvic floor model in physiological and pathological states to understand the changes of biomechanical axis and support that may occur from the normal physiological state to the prolapse pathological state of the pelvic floor. Based on the physiological state model of the pelvic floor, we model the uterus to the pathological state position by balancing intra-abdominal pressure (IAP) and uterine pathological position load. Under combined impairments, we compared the patterns of changes in pelvic floor biomechanics that may be induced by different uterine morphological characteristic positions under different IAP. The orientation of the uterine orifice gradually changes from the sacrococcygeal direction to the vertical downward of vaginal orifice, and a large downward prolapse displacement occurs, and the posterior vaginal wall shows "kneeling" profile with posterior wall bulging prolapse. When the abdominal pressure value was 148.1 cmH2O, the descent displacement of the cervix in the normal and pathological pelvic floor system was 11.94, 20, 21.83 and 19.06 mm in the healthy state, and 13.63, 21.67, 22.94 and 19.38 mm in the combined impairment, respectively. The above suggests a maximum cervical descent displacement of the uterus in the anomalous 90° position, with possible cervical-uterine prolapse as well as prolapse of the posterior vaginal wall. The combined forces of the pelvic floor point in the direction of vertical downward prolapse of the vaginal orifice, and the biomechanical support of the bladder and sacrococcygeal bone gradually diminishes, which may exacerbate the soft tissue impairments and biomechanical imbalances of the pelvic floor to occur of POP disease.

Earthworms restructure the distribution of extracellular antibiotics resistance genes of sludge by modifying the structure of extracellular polymeric substances during vermicomposting.

The role of earthworms in reducing the antibiotic resistance genes (ARGs) in sludge vermicompost remains unclear. The structure of extracellular polymeric substance (EPS) of sludge may be associated with the horizontal gene transfer behavior of ARGs in the vermicomposting of sludge. Therefore, this study aimed to investigate the effects of earthworms on the structural characteristics of EPS associated with the fate of ARGs in EPS during the vermicomposting of sludge. The results showed vermicomposting could diminish the abundance of ARGs and mobile genetic elements (MGEs) in the EPS of sludge by 47.93 % and 7.75 %, compared to the control, respectively. Relative to the control, vermicomposting also led to the reduction of MGEs abundances in the soluble EPS of 40.04 %, lightly bound EPS of 43.53 %, and tightly bound EPS of 70.49 %, respectively. The total abundances of certain ARGs dramatically diminished 95.37 % in tightly bound EPS of sludge during vermicomposting. In vermicomposting, the main influencing factor of ARGs distribution was the proteins in LB-EPS, accounting for 48.5 % of the variation. This study suggests that the earthworms lower the total abundances of ARGs by regulating the microbial community and modifying the microbial metabolic pathways associated with ARGs and MGEs in the EPS of sludge.

Accelerating the humification mechanism of dissolved organic matter using biochar during vermicomposting of dewatered sludge.

The use of biochar can accelerate the vermicomposting process of dewatered sludge. However, the underlying mechanism of vermicompost maturity with biochar is still unclear. This study investigated the effect of biochar on sludge maturation during vermicomposting by analyzing the spectroscopic characteristics of dissolved organic matter. For this, dewatered sludge mixed with and without 5 % biochar were separately vermicomposted. The results showed that the biochar could significantly increase the biomass of earthworms as well as the activity and abundances of bacteria and eukaryotes (P < 0.05) during vermicomposting of sludge. The addition of biochar resulted in a 23.35 % increase in the ratio of absorbances at wavelengths of 250 nm and 365 nm (E250/E365), and a 20.50 % decrease in aromatic proteins of sludge during vermicomposting, compared to the control. The ratio of fulvic acid to humic acid contents rapidly increased from 10 to 15 days in biochar added treatment, which was earlier than that in the control. Compared to control, the biochar addition enhanced the contents of fulvic acid and humic acid in sludge vermicompost by 79.97 % and 91.54 %, respectively. During vermicomposting, the DOM maturated parameter displayed stronger correlation (P < 0.05) between each other in the treatment with biochar, rather than the control. This study suggests that the biochar addition significantly modifies the degradation pathway of dissolved organic matter, thus promoting sludge maturation during vermicomposting.

A 2D equivalent mechanical model of the whole pelvic floor and impairment simulation.

We developed a complete 2D equivalent mechanical model of the pelvic floor based on magnetic resonance imaging (MRI) images of a 35-year-old healthy woman. This model can simulate anterior vaginal prolapse (AVP) due to soft tissue impairment. Thus, we can study the mechanism of prolapse formation from a mechanical perspective and improve the assessment and treatment of the condition in clinical practice. Based on 2D MRI image parameter measurements and computer-aided design methods, the 2D equivalent mechanical model of the whole pelvic floor in the sagittal plane was accurately reconstructed, which includes all necessary tissues of the pelvic floor system. Material parameters were mainly from the literature. We simulated the impairment by reducing the tissue's mechanical properties, and numerical simulations predicted the mechanical response and morphological changes of the healthy and impaired pelvic floor in different states. In six intra-abdominal pressure (IAP) states (8.4-208.9 cmH2 O), the maximum cervical descent in the impaired pelvic floor was 0.3-18.521 mm, which was much greater than that in the healthy pelvic floor (0.14-6.55 mm). Once the impairment occurred (0%-25%), there was a significant increase in maximum displacement, stress, and cervical descent (30.9-36.5 mm, 0.56-1.12 MPa, 4.6-12.1 mm), and a clinically similar prolapse shape occurred. Simple supine and standing will not cause prolapse. The formation of prolapse is closely related to vaginal tissue impairment. In the standing position, the main forces on the healthy pelvic floor system are distributed horizontally posteriorly and inferiorly, reducing the burden in the vertically downward direction.

An integrated imaging sensor for aberration-corrected 3D photography.

Planar digital image sensors facilitate broad applications in a wide range of areas1-5, and the number of pixels has scaled up rapidly in recent years2,6. However, the practical performance of imaging systems is fundamentally limited by spatially nonuniform optical aberrations originating from imperfect lenses or environmental disturbances7,8. Here we propose an integrated scanning light-field imaging sensor, termed a meta-imaging sensor, to achieve high-speed aberration-corrected three-dimensional photography for universal applications without additional hardware modifications. Instead of directly detecting a two-dimensional intensity projection, the meta-imaging sensor captures extra-fine four-dimensional light-field distributions through a vibrating coded microlens array, enabling flexible and precise synthesis of complex-field-modulated images in post-processing. Using the sensor, we achieve high-performance photography up to a gigapixel with a single spherical lens without a data prior, leading to orders-of-magnitude reductions in system capacity and costs for optical imaging. Even in the presence of dynamic atmosphere turbulence, the meta-imaging sensor enables multisite aberration correction across 1,000 arcseconds on an 80-centimetre ground-based telescope without reducing the acquisition speed, paving the way for high-resolution synoptic sky surveys. Moreover, high-density accurate depth maps can be retrieved simultaneously, facilitating diverse applications from autonomous driving to industrial inspections.

Computational optical sectioning with an incoherent multiscale scattering model for light-field microscopy.

Quantitative volumetric fluorescence imaging at high speed across a long term is vital to understand various cellular and subcellular behaviors in living organisms. Light-field microscopy provides a compact computational solution by imaging the entire volume in a tomographic way, while facing severe degradation in scattering tissue or densely-labelled samples. To address this problem, we propose an incoherent multiscale scattering model in a complete space for quantitative 3D reconstruction in complicated environments, which is called computational optical sectioning. Without the requirement of any hardware modifications, our method can be generally applied to different light-field schemes with reduction in background fluorescence, reconstruction artifacts, and computational costs, facilitating more practical applications of LFM in a broad community. We validate the superior performance by imaging various biological dynamics in Drosophila embryos, zebrafish larvae, and mice.