Electronic structures and quantum capacitance of twisted bilayer graphene with defects based on three-band tight-binding model.

Twisted bilayer graphene (tBLG) with C vacancies would greatly improve the density of states (DOS) around the Fermi level (EF) and quantum capacitance; however, the single-band tight-binding model only considering pz orbitals cannot accurately capture the low-energy physics of tBLG with C vacancies. In this work, a three-band tight-binding model containing three p orbitals of C atoms is proposed to explore the modulation mechanism of C vacancies on the DOS and quantum capacitance of tBLG. We first obtain the hopping integral parameters of the three-band tight-binding model, and then explore the electronic structures and the quantum capacitance of tBLG at a twisting angle of θ = 1.47° under different C vacancy concentrations. The impurity states contributed by C atoms with dangling bonds located around the EF and the interlayer hopping interaction could induce band splitting of the impurity states. Therefore, compared with the quantum capacitance of pristine tBLG (∼18.82 µF cm-2) at zero bias, the quantum capacitance is improved to ∼172.76 µF cm-2 at zero bias, and the working window with relatively large quantum capacitance in the low-voltage range is broadened in tBLG with C vacancies due to the enhanced DOS around the EF. Moreover, the quantum capacitance of tBLG is further increased at zero bias with an increase of the C vacancy concentration induced by more impurity states. These findings not only provide a suitable multi-band tight-binding model to describe tBLG with C vacancies but also offer theoretical insight for designing electrode candidates for low-power consumption devices with improved quantum capacitance.

Above-Room-Temperature Ferromagnetism in Copper-Doped Two-Dimensional Chromium-Based Nanosheets.

Two-dimensional ferromagnetic materials (2D-FMs) are expected to become ideal candidates for low-power, high-density information storage in next-generation spintronics devices due to their atomically ultrathin and intriguing magnetic properties. However, 2D-FMs with room-temperature Curie temperatures (Tc) are still rarely reported, which greatly hinders their research progress and practical applications. Herein, ultrathin Cu-doped Cr7Te8 FMs were successfully prepared and can achieve above-room-temperature ferromagnetism with perpendicular magnetic anisotropy via a facile chemical vapor deposition (CVD) method, which can be controlled down to an atomic thin layer of ∼3.4 nm. STEM-EDX quantitative analysis shows that the proportion of Cu to metal atoms is ∼5%. Moreover, based on the anomalous Hall effect (AHE) measurements in a six-terminal Hall bar device without any encapsulation as well as an out-of-plane magnetic field, the maximum Tc achieved ∼315 K when the thickness of the sample is ∼28.8 nm; even the ultrathin 7.6 nm sample possessed a near-room-temperature Tc of ∼275 K. Meanwhile, theoretical calculations elucidated the mechanism of the ferromagnetic enhancement of Cu-doped Cr7Te8 nanosheets. More importantly, the ferromagnetism of CVD-synthesized Cu-doped CrSe nanosheets can also be maintained above room temperature. Our work broadens the scope on room-temperature ferromagnets and their heterojunctions, promoting fundamental research and practical applications in next-generation spintronics.

Pressure-Induced Structural Phase Transition and Enhanced Interlayer Coupling in Two-Dimensional Ferromagnet CrSiTe3.

The two-dimensional van der Waals ferromagnetic semiconductor CrSiTe3 has attracted growing interest as an intrinsic topological magnet. Both superconductivity and enhancement of ferromagnetism, usually competing for orders, have been observed in CrSiTe3 at high pressure. However, the high-pressure structure of CrSiTe3 is still unclear, setting obstacles in understanding pressure-induced novel physics. Here, combining the Raman spectra and first-principles calculations, the structure of CrSiTe3 at high pressure has been clarified. The interlayer breathing mode located at ∼42.1 cm-1 has been observed for the first time in CrSiTe3 by ultralow-frequency Raman spectroscopy at high pressure. Theoretical calculations confirm a phase transition from the R3̅ phase to the R3 phase accompanying noticeable enhancement of the Curie temperature. Our results highlight ultralow-frequency Raman spectroscopy combined with high pressure for detecting and modulating the structure and interlayer coupling of two-dimensional materials.

Electronic structures and anisotropic carrier mobilities of monolayer ternary metal iodides MLaI5(M=Mg, Ca, Sr, Ba).

Exploiting two-dimensional (2D) materials with natural band gaps and anisotropic quasi-one-dimensional (quasi-1D) carrier transport character is essential in high-performance nanoscale transistors and photodetectors. Herein, the stabilities, electronic structures and carrier mobilities of 2D monolayer ternary metal iodides MLaI5(M = Mg, Ca, Sr, Ba) have been explored by utilizing first-principles calculations combined with numerical calculations. It is found that exfoliating MLaI5monolayers are feasible owing to low cleavage energy of 0.19-0.21 J m-2and MLaI5monolayers are thermodynamically stable based on phonon spectra. MLaI5monolayers are semiconductors with band gaps ranging from 2.08 eV for MgLaI5to 2.51 eV for BaLaI5. The carrier mobility is reasonably examined considering both acoustic deformation potential scattering and polar optical phonon scattering mechanisms. All MLaI5monolayers demonstrate superior anisotropic and quasi-1D carrier transport character due to the striped structures. In particular, the anisotropic ratios of electron and hole mobilities along different directions reach hundreds and tens for MLaI5monolayers, respectively. Thus, the effective electron-hole spatial separation could be actually achieved. Moreover, the absolute locations of band edges of MLaI5monolayers have been aligned. These results would provide fundamental insights for MLaI5monolayers applying in nano-electronic and optoelectronic devices.

Synthesis and in vitro anti-HSV-1 activity of a novel Hsp90 inhibitor BJ-B11.

In this study, a novel Hsp90 inhibitor BJ-B11, was synthesized and evaluated for in vitro antiviral activity against several viruses. Possible anti-HSV-1 mechanisms were also investigated. BJ-B11 displayed no antiviral activity against coxsackievirus B(3) (CVB(3)), human respiratory syncytial virus (RSV) and influenza virus (H1N1), but exhibited potent anti-HSV-1 and HSV-2 activity with EC(50) values of 0.42±0.18 µM and 0.60±0.21 µM, respectively. Additionally, the inhibitory effects of BJ-B11 against HSV-1 were likely to be introduced at early stage of infection. Our results indicate that BJ-B11 with alternative mechanisms of action is potent as an anti-HSV clinical trial candidate.

Protease immobilization on gamma-Fe2O3/Fe3O4 magnetic nanoparticles for the synthesis of oligopeptides in organic solvents.

The use of nanobiocatalysts, with the combination of nanotechnology and biotechnology, is considered as an exciting and rapidly emerging area. The use of iron oxide magnetic nanoparticles, as enzyme immobilization carriers, has drawn great attention because of their unique properties, such as controllable particle size, large surface area, modifiable surface, and easy recovery. In this study, various gamma-Fe(2)O(3)/Fe(3)O(4) magnetic nanoparticles with immobilized proteases were successfully prepared by three different immobilization strategies including A) direct binding, B) with thiophene as a linker, and C) with triazole as a linker. The oligopeptides syntheses catalyzed by these magnetic nanoparticles (MNPs) with immobilized proteases were systematically studied. Our results show that i) for magnetic nanoparticles immobilized alpha-chymotrypsin, both immobilization strategies A and B furnished good reusability for the Z-Tyr-Gly-Gly-OEt synthesis, the MNPs enzymes can be readily used at least five times without significant loss of its catalytic performance: ii) In the case of Z-Asp-Phe-OMe synthesis catalyzed by magnetic nanoparticles immobilized thermolysin, immobilization Strategy B provided the best recyclability: iii) For the immobilized papain, although Strategy A or B afforded an immobilized enzyme for the first cycle of Z-Ala-Leu-NHNHPh synthesis in good yield, their subsequent catalytic activity decreased rapidly. In general, the gamma-Fe(2)O(3) MNPs were better for use as an immobilization matrix, rather than the Fe(3)O(4) MNPs, owing to their smaller particle size and higher surface area.

Assembly of Anionic Conjugated Polymer with 6-O-Modified PNP-ß-Galactoside for Fluorescence Logic-signal-based Multiplex Detections of Enzymes.

Anionic conjugated polymer (PFP-SO 3-) was assembled with a novel enzymatic substrate 6-O-modified PNP-ß-galactoside (1) for sensitive multiplex enzyme detections. The PFP-SO 3-/1/lipase/ß-galactosidase system has two chemical input signals which are Input 1 (lipase) and Input 2 (ß-galactosidase), and output optical signals such as fluorescence emission at 416 nm or 450 nm. Four types of logic gates, including YES, INH, NAND and AND, were successfully constructed and utilized for multiplex detections of lipase and ß-galactosidase in one tube.