Preparation of PMMA-Based Temperature/pH Responsive Nanoparticles Encapsulating 5-Fluorouracil and Methotrexate In Situ by One-Pot Dispersion Photopolymerization.

In order to achieve long-term and controllable release of anti-tumor drugs at specific sites, temperature/pH responsive nanoparticles encapsulating 5-fluorouracil and methotrexate in situ are prepared through dispersion photopolymerization under green LED irradiation. The physicochemical properties of nanoparticles are characterized by scanning electron microscopy, Fourier transform infrared, dynamic light scattering, thermogravimetric/differential scanning calorimetry, and X-ray diffraction. In vitro drug release at different temperatures and pH values is examined to ascertain the release pattern of two drugs, which can be well described by Korsmeyer-Peppas kinetic model. The cytotoxicity evaluation illustrates that the tumor cells could be more effectively killed by the drug-loaded nanoparticles, and the improved therapeutic effect is attributed to the controllable and sustainable drug release as well as the enhanced cellular uptake. The blood safety and good biocompatibility of nanoparticles are further confirmed by hemolysis assay, indicating the prepared nanoparticles are potential candidates for effective tumor treatment.

Rapid hemostatic antibacterial self-gelling powder based on methacryloylsulfonyl betaine and quaternized carboxymethyl chitosan.

Hemostatic powders can be used for deep wounds and wounds with irregular shapes that are frequently inaccessible to traditional hemostatic dressings like hemostatic gauze, sponges, and foams. In this study, sulfobetaine methacrylate (SBMA) and quaternized carboxymethyl chitosan (QCCS) were combined to create an antibacterial hemostatic hydrogel through photopolymerization under green LED irradiation, which was then changed into PSBMA/QCCS powder. PSBMA/QCCS powder could quickly form hydrogel with strong wet adhesion. The internal structure, water absorption capacity, and adhesion properties of the powder were evaluated. The coagulation ability, antimicrobial properties, and biocompatibility of the powder were also characterized. The PSBMA/QCCS powder could aggregate blood cells and platelets to enhance hemostasis. Meanwhile, PSBMA/QCCS powder also showed effective antibacterial ability against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). In summary, PSBMA/QCCS powder is a promising hemostatic agent with the characteristics of quick hemostasis, tough wet adhesion, satisfactory biocompatibility, considerable antibacterial effect, and adaptability to any irregularly shaped wounds.

Nanogels co-loading paclitaxel and curcumin prepared in situ through photopolymerization at 532 nm for synergistically suppressing breast tumors.

Combined chemotherapy plays an increasingly important and practical role in the clinical treatment of malignant tumor. In this study, paclitaxel (PTX) and curcumin (Cur) are simultaneously encapsulated into nanogels (termed as NG-PC) in situ by microemulsion photopolymerization at 532 nm for synergistically suppressing breast tumors. NG-PC with a size of 180 nm and a low polydispersity index (PDI < 0.2) presents a controlled and cumulative release of PTX and Cur within 90 h. Moreover, NG-PC displays a remarkable killing effect against 4T1 and MCF-7 cells. In vivo antitumor evaluation on 4T1 tumor-bearing mice demonstrates that NG-PC has significantly higher ability to inhibit tumor growth, inducing necrosis, apoptosis and suppression of proliferation than that of a single drug. Our research provides a facile method to prepare a nano-drug delivery platform with excellent drug co-loading ability and synergistic antitumor effect.

ORF355 confers enhanced salinity stress adaptability to S-type cytoplasmic male sterility maize by modulating the mitochondrial metabolic homeostasis.

Moderate stimuli in mitochondria improve wide-ranging stress adaptability in animals, but whether mitochondria play similar roles in plants is largely unknown. Here, we report the enhanced stress adaptability of S-type cytoplasmic male sterility (CMS-S) maize and its association with mild expression of sterilizing gene ORF355. A CMS-S maize line exhibited superior growth potential and higher yield than those of the near-isogenic N-type line in saline fields. Moderate expression of ORF355 induced the accumulation of reactive oxygen species and activated the cellular antioxidative defense system. This adaptive response was mediated by elevation of the nicotinamide adenine dinucleotide concentration and associated metabolic homeostasis. Metabolome analysis revealed broad metabolic changes in CMS-S lines, even in the absence of salinity stress. Metabolic products associated with amino acid metabolism and galactose metabolism were substantially changed, which underpinned the alteration of the antioxidative defense system in CMS-S plants. The results reveal the ORF355-mediated superior stress adaptability in CMS-S maize and might provide an important route to developing salt-tolerant maize varieties.

Influence of glucan on physicochemical and rheology properties of chitin nanofibers prepared from Shiitake stipes.

Procedures for chitin nanofibers extraction from mushroom significantly modify their structure and physicochemical properties, through disintegration and surface oxidation of glucan residue, as well as surface deacetylation of chitin. Here, four kinds of chitin-glucan nanofibers (CGNF) were isolated form Shiitake stipes via different alkali treatment conditions, wherein glucan content ranged from 6.4 % to 46.8 %. Observations with transmission electron microscopy showed that CGNFs possessed average widths with 5.1 ± 1.2 to 7.1 ± 1.5 nm. The glucan showed a negative effect on the crystal index and thermal stability of CGNFs. A strong positive correlation was observed between glucan residues and zeta potential value. The phenomenon about the increase of viscosity, yield stress and elastic modulus upon glucan decrease was discussed. Overall, the residual glucan offers fungi-derived chitin nanomaterials a diversity of material properties and tuning its content is a feasible approach for customize nano chitin fibers used in nutraceutical and food industry.

RppM, Encoding a Typical CC-NBS-LRR Protein, Confers Resistance to Southern Corn Rust in Maize.

Southern corn rust (SCR) caused by Puccinia polysora Underw. poses a major threat to maize production worldwide. The utilization of host SCR-resistance genes and the cultivation of resistant cultivars are the most effective, economical strategies for controlling SCR. Here, we identified and cloned a new SCR resistance gene, RppM, from the elite maize inbred line Jing2416K. RppM was found to encode a typical CC-NBS-LRR protein localized in both the nucleus and cytoplasm. This gene was constitutively expressed at all developmental stages and in all tissues examined, with the strongest expression detected in leaves at the mature stage. A transcriptome analysis provided further evidence that multiple defense systems were initiated in Jing2416K, including pathogen-associated molecular pattern-triggered immunity and effector-triggered immunity, reinforcement of cell walls, accumulation of antimicrobial compounds, and activation of phytohormone signaling pathways. Finally, we developed functional Kompetitive allele-specific PCR markers for RppM using two conserved SNP sites and successfully applied these functional markers for the detection of RppM and the cultivation of resistant maize cultivars, demonstrating their great potential utility in maize breeding.

Temperature/pH-responsive carmofur-loaded nanogels rapidly prepared via one-pot laser-induced emulsion polymerization.

Tumor microenvironment-responsive nanogels loading antitumor drugs can improve the chemotherapy efficiency due to their suitable size, great hydrophilicity, excellent biocompatibility, and sensitivity to specific stimulation. Herein, a simple and effective strategy of one-pot laser-induced emulsion polymerization at 532 nm was developed to prepare carmofur-loaded nanogels based on biocompatible and temperature/pH-sensitive monomers including polyethylene glycol diacrylate (PEGDA), N-vinylcaprolactam (NVCL), and 2-(dimethylamino) ethyl methacrylate (DMAEMA). The nanogels loading carmofur with dual-stimuli responsive drug release properties were rapidly obtained under laser irradiation (beam diameter 2.5 mm, laser power 60 mW) for only 100 s. These nanogels exhibited an average hydrodynamic diameter of 195.9 nm and a low polydispersity index of 0.115. The effect of monomer ratio on the size, morphology, double-bond conversion, and thermo/pH-sensitivity of nanogels was investigated. The cumulative carmofur release from nanogels at pH 5.0 within 48 h was nearly three times that at pH 7.4, while the release amount at 42 °C was twice that at 25 °C, showing the controlled and sustainable release with the change of pH and temperature. The in vitro release kinetics of carmofur was in accord with first-order release model.

Tunable mechanical behavior of collagen-based films: A comparison of celluloses in different geometries.

Collagen (Col) films were reinforced by celluloses in different geometries: microcrystalline cellulose (MCC), cellulosic fines (CF), cellulose nanofiber (CNF) and cellulose nanocrystals (CNC). The reinforcement mechanisms were investigated by the elastoplasticity and fracture appearance. Compared with the fracture stress of collagen film (67.5 MPa), the Col-CNF films effectively borne the stress (95.8 MPa) by intercrystalline fracture, ascribing the abundant hydrogen bonding and mechanical locking between cellulose and collagen. The toughness of Col-CF films was increased by the interfibrillar slippage of CF and pull-off of CF within the matrix, improving the strain-to-break from 8.37% to 12.13%. The films added with MCC and CNC weaken the mechanical behavior, due to the defects and lack of mechanical locking. Besides, the effects of celluloses' geometries on the thickness, density, water-tightness, thermal stability, crystallinity and FTIR of films were also investigated. These provide the evidence that the geometries of fillers diversely improve the behaviors of collagen film offering strategies for the film with adjustable mechanical properties.

Nanogels loading curcumin in situ through microemulsion photopolymerization for enhancement of antitumor effects.

Drug-loaded nanogels for cancer treatment can limit the free diffusion and distribution of drug molecules in the whole body to reduce undesirable side effects and improve the drug absorption efficiency of the tumor. In this study, curcumin as a model drug was encapsulated into nanogels in situ through microemulsion photopolymerization at 532 nm. Nanogels loaded with curcumin (NG-C) displayed a diameter of around 150 nm with good stability and a low polydispersity index of around 0.1. NG-C had a drug-loading capacity of 8.96 ± 1.16 wt%. The cumulative release of curcumin from NG-C was around 25%, 34% and 55% within 90 h in pH 7.4, 6.8 and 5.0 PBS buffer, respectively. NG-C presented prominent cytotoxicity toward Hep G2 and HeLa cancer cells in vitro. Moreover, NG-C exhibited much a stronger inhibition of tumor growth, necrosis, apoptosis, and the suppression of proliferation compared with curcumin on Hep G2 tumor-bearing nude mice.

Effect of TEOA on the Process of Photopolymerization at 532 nm and Properties of Nanogels.

Nanogel is an important kind of biomaterials applied for wound dressings, drug delivery, medical diagnostics and biosensors. The properties of nanogels closely depend on the density of the crosslinking network. In this study, the role of triethanolamine (TEOA) in the effect on the crosslinking degree of nanogels based on poly(ethylene glycol) diacrylate (PEGDA) was investigated and illustrated. The effect of TEOA on the process of photopolymerization at 532 nm and properties of the nanogels was systematically investigated by using UV-vis spectroscopy, FT-IR spectroscopy, 1 H NMR, DLS, SEM, AFM and DSC. In brief, the double-bond conversion of photopolymerization and the crosslinking degree of nanogels can be effectively regulated by TEOA.

Focusing on intramuscular connective tissue: Effect of cooking time and temperature on physical, textual, and structural properties of yak meat.

This study aimed to evaluate the effects of different cooking time (2, 4, and 6 h) and temperature (50, 60, 70, 80, and 90 °C) on physical, textual, and structural properties of longissimus lumborum muscle of yak, and to explore the thermal denaturation process of intramuscular collagen by using a new tool (collagen hybridizing peptide staining, CHP staining). The results showed that tenderness was affected by the interaction of cooking time and temperature and the changes in moisture and collagen composition. In comparison with cooking time, temperature had more obvious effects on cooking loss, moisture content and redness. Scanning electron microscopy showed that as the temperature increased, intramuscular connective tissue gradually degraded, and muscle fibers became more compact. CHP staining showed that the collagen in the perimysium first denatured at 50 °C, and more and more collagen denatured and degraded as the temperature increased.

Design and Applications of Tumor Microenvironment-Responsive Nanogels as Drug Carriers.

In recent years, the exploration of tumor microenvironment has provided a new approach for tumor treatment. More and more researches are devoted to designing tumor microenvironment-responsive nanogels loaded with therapeutic drugs. Compared with other drug carriers, nanogel has shown great potential in improving the effect of chemotherapy, which is attributed to its stable size, superior hydrophilicity, excellent biocompatibility, and responsiveness to specific environment. This review primarily summarizes the common preparation techniques of nanogels (such as free radical polymerization, covalent cross-linking, and physical self-assembly) and loading ways of drug in nanogels (including physical encapsulation and chemical coupling) as well as the controlled drug release behaviors. Furthermore, the difficulties and prospects of nanogels as drug carriers are also briefly described.

Rapid preparation of nanogels by photopolymerization at 532 nm.

The strategy of laser beam expansion was used to rapidly prepare nanogels by photopolymerization at 532 nm under low monomer concentration. According to the unique micellar morphology formed by amphiphilic polyethylene glycol diacrylate (PEGDA) in water, the monomer concentration was largely decreased to increase the distance of micellar aggregates. In this case, the photo-crosslinking could prefer to occur inside the micelles instead of crosslinking between the micellar aggregates. The variations of double bond content with reaction time in different beam expansion experiments were investigated. Finally, nanogels with uniform size could be rapidly prepared by regulating the reaction parameters, including monomer concentration, reaction time and power density.

Preparation of ultrasmall nanogels by facile emulsion-free photopolymerization at 532 nm.

Nanogels have been widely prepared and characterized in recent years due to their unique advantages. Here, an effective, original, and facile method of emulsion-free photopolymerization at 532 nm without surfactant was developed to prepare nanogels based on poly(ethylene glycol) diacrylate (PEGDA). The 532 nm continuous laser with symmetrical energy distribution like a three-dimensional shape of a straw hat was used to control the reaction region. The self-emulsification of PEGDA in water was studied and PEGDA micelles were directly cross-linked by controlling the laser energy. The number of micelles participating in the microreaction region and the double bond crosslinking between micellar aggregates and inside micelles were reasonably regulated. The size of the nanogels could be effectively modulated by controlling reaction parameters including laser power, monomer concentration, initiator concentration, and reaction time. Finally, ultrasmall nanogels with around 30 nm in size were prepared by balancing double bond crosslinking between micellar aggregates and inside micelles.

Identification and Fine Mapping of RppM, a Southern Corn Rust Resistance Gene in Maize.

Southern corn rust (SCR) caused by Puccinia polysora Underw. is a major disease causing severe yield losses during maize production. Here, we identified and mapped the SCR resistance gene RppM from the near-isogenic line Kangxiujing2416 (Jing2416K), which harbors RppM in the genetic background of the susceptible inbred line Jing2416. In this study, the inheritance of SCR resistance was investigated in F2 and F3 populations derived from a cross between Jing2416K and Jing2416. The observed 3:1 segregation ratio of resistant to susceptible plants indicated that the SCR resistance is controlled by a single dominant gene. Using an F2 population, we performed bulked segregant analysis (BSA) sequencing and mapped RppM to a 3.69-Mb region on chromosome arm 10S. To further narrow down the region harboring RppM, we developed 13 insertion/deletion (InDel) markers based on the sequencing data. Finally, RppM was mapped to a region spanning 110-kb using susceptible individuals from a large F2 population. Two genes (Zm00001d023265 and Zm00001d023267) encoding putative CC-NBS-LRR (coiled-coiled, nucleotide-binding site, and leucine-rich repeat) proteins, a common characteristic of R genes, were located in this region (B73 RefGen_v4 reference genome). Sequencing and comparison of the two genes cloned from Jing2416K and Jing2416 revealed sequence variations in their coding regions. The relative expression levels of these two genes in Jing2416K were found to be significantly higher than those in Jing2416. Zm00001d023265 and Zm00001d023267 are thus potential RppM candidates.

Effects of different water management strategies on the stability of cadmium and copper immobilization by biochar in rice-wheat rotation system.

Chemical immobilization of heavy metals is a simple, low-cost, and environment-friendly technology for remediation of heavy metals contaminated soils. However, changes in environmental conditions, such as water management, acid deposition, temperature fluctuation, etc., might result in release of metal ions from the fixation sites, and the long-term stability of immobilization remediation is unclear. This study attempted to investigate the impact of water management strategies (wetting-drying cycle and dry cycle) on the stability of heavy metal immobilization by one-time application of biochar during 3 consecutive years of rice-wheat crop in Cu/Cd-contaminated soil. The transformation and accumulation of Cd and Cu in soil-crop system and the morphololgy and composition of biochar were analyzed. The results revealed that wetting-drying cycle and drying treatments reduced the contents of available Cd and Cu in soil by 15.9%-17.7% and 23.9%-31.5% and by 19.8%-62.7% and 16.1%-65.0%, as well as increased soil pH by 0.11-0.31 and 0.17-0.56, respectively. In the wetting-drying cycle treatment, biochar was more favorable for decrease in Cd and Cu accumulation in crop, when compared with that in dry treatment; however, the differences were insignificant in the subsequent years. Although the different water management strategies had no obvious effect on the soil total C, physicochemical analysis of the biochar collected after pot experiments indicated that the obvious structural decomposition of biochar in the drying treatment may have resulted in the release of heavy metals immobilized in biochar. These findings help in better understanding of the long-term immobilization mechanism of biochar in soil-plant system.

Magnetic nanoparticles encapsulated laccase nanoflowers: evaluation of enzymatic activity and reusability for degradation of malachite green.

Magnetic laccase nanoflowers (MNFs-Lac) were successfully prepared through encapsulating Fe3O4 magnetic nanoparticles into the interior of laccase nanoflowers by grafting N-(phosphonomethyl)iminodiacetic acid (PMIDA) as an interconnecting bridge between the magnetic nanoparticles and copper ions. The characterizations by scanning electron microscopy and transmission electron microscopy showed that MNFs-Lac were spherical, porous and flower-like crystals with diameters of ∼10 µm, and Fe3O4 nanoparticles were encapsulated in the interior of MNFs-Lac evenly. The enzymatic activity and reusability of MNFs-Lac were evaluated based on the degradation efficiency for malachite green (MG). The degradation parameters, concerning initial MG concentration, dosage of MNFs-Lac, reaction temperature, pH value and reaction time, were optimized through single-factor experiments. Under the optimal conditions, 25 mg·L-1 MG can be degraded almost completely by 1.5 g·L-1 MNFs-Lac within 15 min. When the MNFs-Lac were reused for 18 times, the degradation efficiency of MG was still as high as 90%. These results suggested that the modified preparation method improved greatly the reusability of MNFs-Lac, which made them more suitable to degrade MG in a water environment.

Upconversion Nanoparticle-Assisted Photopolymerization.

Near-infrared (NIR) laser has deeper penetration and lower thermal effect compared with ultraviolet-visible (UV/vis) laser. NIR laser can stimulate upconversion nanoparticles (UCNPs) to emit UV/vis light efficiently. Therefore, the UCNPs become an important kind of materials to produce upconversion luminescence through NIR laser. Compared with photopolymerization induced with UV/vis laser, the UV/vis light from UCNP-assisted photopolymerization presents some unique characters. This review focuses on the research progress of UCNP-assisted photopolymerization and its potential applications. We will discuss the influencing factors of UCNP-assisted polymerization, illustrate the relation between the gel size and monomer concentration and propose the development prospects of UCNP-assisted polymerization in the biological field.

A novel cross-linked nanoparticle with aggregation-induced emission properties for cancer cell imaging.

Fluorescent probes have been widely used in bioimaging as an efficient and convenient analytical tool. From the initial inorganic nanoparticles and small organic molecules to polymeric nanoparticles, scientific researchers have been trying to develop a probe with strong fluorescence and excellent biocompatibility. In this study, a tetraphenylethylene derivative with AIE properties and hyaluronic acid modified by methacrylic anhydride were combined to prepare a novel nanoparticle (HA-Ac-Pha-C) as a fluorescent probe by a photochemical cross-linking reaction. The fluorescence intensity and size of the nanoparticles were characterized by different techniques. It was confirmed that cross-linked nanoparticles not only showed stronger fluorescence, but also had better photostability while still maintaining 85.9% of the initial intensity after seven days. Moreover, cells and zebrafish imaging experiments also demonstrated that nanoparticles show specific fluorescence labeling for cancer cells and excellent biocompatibility in living organisms.