Impact of One-Lung Ventilation on Oxygenation and Ventilation Time in Thoracoscopic Heart Surgery: A Comparative Analysis with Median Thoracotomy.

BACKGROUND One-lung ventilation is the separation of the lungs by mechanical methods to allow ventilation of only one lung, particularly when there is pathology in the other lung. This retrospective study from a single center aimed to compare 49 patients undergoing thoracoscopic cardiac surgery using one-lung ventilation with 48 patients undergoing thoracoscopic cardiac surgery with median thoracotomy. MATERIAL AND METHODS This single-center retrospective study analyzed patients who underwent thoracoscopic cardiac surgery based on one-lung ventilation (experimental group, n=49). Other patients undergoing a median thoracotomy cardiac operation were defined as the comparison group (n=48). The oxygenation index and the mechanical ventilation time were also recorded. RESULTS There was no significant difference in the immediate oxygenation index between the experimental group and comparison group (P>0.05). There was no significant difference for the oxygenation index between men and women in both groups (P>0.05). The cardiopulmonary bypass time significantly affected the oxygenation index (F=7.200, P=0.009). Operation methods (one-lung ventilation thoracoscopy or median thoracotomy) affected postoperative ventilator use time (F=8.337, P=0.005). Cardiopulmonary bypass time (F=16.002, P<0.001) and age (F=4.384, P=0.039) had significant effects on ventilator use time. There was no significant effect of sex (F=0.75, P=0.389) on ventilator use time. CONCLUSIONS Our results indicated that one-lung ventilation thoracoscopic cardiac surgery did not affect the immediate postoperative oxygenation index; however, cardiopulmonary bypass time did significantly affect the immediate postoperative oxygenation index. Also, one-lung ventilation thoracoscopic cardiac surgery had a shorter postoperative mechanical ventilation use time than did traditional median thoracotomy cardiac surgery.

Adaptive coded phase mask design and high-quality image reconstruction for interference-less coded aperture correlation holography.

The interference-less coded aperture correlation holography is a non-scanning, motionless, and incoherent technique for imaging three-dimensional objects without two-wave interference. Nevertheless, a challenge lies in that the coded phase mask encodes the system noise, while traditional reconstruction algorithms often introduce unwanted surplus background components during reconstruction. A deep learning-based method is proposed to mitigate system noise and background components simultaneously. Specifically, this method involves two sub-networks: a coded phase mask design sub-network and an image reconstruction sub-network. The former leverages the object's frequency distribution to generate an adaptive coded phase mask that encodes the object wave-front precisely without being affected by the superfluous system noise. The latter establishes a mapping between the autocorrelations of the hologram and the object, effectively suppresses the background components by embedding a prior physical knowledge and improves the neural network's adaptability and interpretability. Experimental results demonstrate the effectiveness of the proposed method in suppressing system noise and background components, thereby significantly improving the signal-to-noise ratio of the reconstructed images.

Preparation and Properties of Attapulgite/Brucite Fiber-Based Highly Absorbent Polymer Composite.

The ATP-BF-P(HEC-AA-AMPS) composite highly absorbent polymer was copolymerized with acrylic acid (AA) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) using an aqueous solution method with attapulgite (ATP) and attapulgite (ATP) as a matrix. The prepared ATP-BF-P(HEC-AA-AMPS) was characterized in terms of microstructure and tested for its water absorption capacity, water retention properties, and pH dynamic sensing ability. The results showed that the synthesized ATP-BF-P(HEC-AA-AMPS) had a rough and porous surface and a high water absorption capacity and rate, almost reaching the maximum water absorption around 20 min, and demonstrated excellent water retention performance at low and medium temperatures. ATP-BF-P(HEC-AA-AMPS) has a sensitive dynamic sensing ability in different pH solutions, with a high swelling capacity between pH 6.0 and 10.0. When the pH value exceeded 10.0, the swelling rate decreased rapidly. Additionally, the thermal stability and mechanical strength of the highly absorbent polymers were significantly improved after blending with ATP and BF.

Surgical treatment improves overall survival of hepatocellular carcinoma with extrahepatic metastases after conversion therapy: a multicenter retrospective study.

Systemic therapy is typically the primary treatment choice for hepatocellular carcinoma (HCC) patients with extrahepatic metastases. Some patients may achieve partial response (PR) or complete response (CR) with systemic treatment, leading to the possibility of their primary tumor becoming resectable. This study aimed to investigate whether these patients could achieve longer survival through surgical resection of their primary tumor. We retrospectively collected data from 150 HCC patients with extrahepatic metastases treated at 15 different centers from January 1st, 2015, to November 30th, 2022. We evaluated their overall survival (OS) and progress-free survival (PFS) and analyzed risk factors impacting both OS and PFS were analyzed. Patients who received surgical treatment had longer OS compared to those who did not (median OS 16.5 months vs. 11.3 months). However, there was no significant difference in progression-free survival between the two groups. Portal vein invasion (P = 0.025) was identified as a risk factor for poor prognosis in patients, while effective first-line treatment (P = 0.039) and surgical treatment (P = 0.005) were protective factors. No factors showed statistical significance in the analysis of PFS. Effective first-line treatment (P = 0.027) and surgical treatment (P = 0.006) were both independent protective factors for prolonging patient prognosis, while portal vein invasion was an independent risk factor (P = 0.044). HCC patients with extrahepatic metastases who achieve PR/CR with conversion therapy may experience longer OS through surgical treatment. This study is the first to analyze the clinical outcomes of patients receiving surgical treatment for HCC with extrahepatic metastases.

Novel insights and new therapeutic potentials for macrophages in pulmonary hypertension.

Inflammation and immune processes underlie pulmonary hypertension progression. Two main different activated phenotypes of macrophages, classically activated M1 macrophages and alternatively activated M2 macrophages, are both involved in inflammatory processes related to pulmonary hypertension. Recent advances suggest that macrophages coordinate interactions among different proinflammatory and anti-inflammatory mediators, and other cellular components such as smooth muscle cells and fibroblasts. In this review, we summarize the current literature on the role of macrophages in the pathogenesis of pulmonary hypertension, including the origin of pulmonary macrophages and their response to triggers of pulmonary hypertension. We then discuss the interactions among macrophages, cytokines, and vascular adventitial fibroblasts in pulmonary hypertension, as well as the potential therapeutic benefits of macrophages in this disease. Identifying the critical role of macrophages in pulmonary hypertension will contribute to a comprehensive understanding of this pathophysiological abnormality, and may provide new perspectives for pulmonary hypertension management.

Household fuel and direct carbon emission disparity in rural China.

Universal access to clean fuels in household use is one explicit indicator of sustainable development while currently still billions of people rely on solid fuels for daily cooking. Despite of the recognized clean transition trend in general, disparities in household energy mix in different activities (e.g. cooking and heating) and historical trends remain to be elucidated. In this study, we revealed the historical changing trend of the disparity in household cooking and heating activities and associated carbon emissions in rural China. The study found that the poor had higher total direct energy consumption but used less modern energy, especially in cooking activities, in which the poor consumed 60 % more energy than the rich. The disparity in modern household energy use decreased over time, but conversely the disparity in total residential energy consumption increased due to the different energy elasticities as income increases. Though per-capita household CO2 and Black Carbon (BC) emissions were decreasing under switching to modern energies, the disparity in household CO2 and BC deepened over time, and the low-income groups emitted âˆ¼ 10 kg CO2 more compared to the high-income population. Relying solely on spontaneous clean cooking transition had limited impacts in reducing disparities in household energy and carbon emissions, whereas improving access to modern energy had substantial potential to reduce energy consumption and carbon emissions and its disparity. Differentiated energy-related policies to promote high-efficiency modern heating energies affordable for the low-income population should be developed to reduce the disparity, and consequently benefit human health and climate change equally.

Bioinspired Thermal Conductive Cellulose Nanofibers/Boron Nitride Coating Enabled by Co-Exfoliation and Interfacial Engineering.

Thermal conductive coating materials with combination of mechanical robustness, good adhesion and electrical insulation are in high demand in the electronics industry. However, very few progresses have been achieved in constructing a highly thermal conductive composites coating that can conformably coat on desired subjects for efficient thermal dissipation, due to their lack of materials design and structure control. Herein, we report a bioinspired thermal conductive coating material from cellulose nanofibers (CNFs), boron nitride (BN), and polydopamine (PDA) by mimicking the layered structure of nacre. Owing to the strong interfacial strength, mechanical robustness, and high thermal conductivity of CNFs, they do not only enhance the exfoliation and dispersion of BN nanoplates, but also bridge BN nanoplates to achieve superior thermal and mechanical performance. The resulting composites coating exhibits a high thermal conductivity of 13.8 W/(m·K) that surpasses most of the reported thermal conductive composites coating owing to the formation of an efficient thermal conductive pathway in the layered structure. Additionally, the coating material has good interface adhesion to conformably wrap around various substrates by scalable spray coating, combined with good mechanical robustness, sustainability, electrical insulation, low-cost, and easy processability, which makes our materials attractive for electronic packaging applications.

Targeting vulnerable microcircuits in the ventral hippocampus of male transgenic mice to rescue Alzheimer-like social memory loss.

BACKGROUND: Episodic memory loss is a prominent clinical manifestation of Alzheimer's disease (AD), which is closely related to tau pathology and hippocampal impairment. Due to the heterogeneity of brain neurons, the specific roles of different brain neurons in terms of their sensitivity to tau accumulation and their contribution to AD-like social memory loss remain unclear. Therefore, further investigation is necessary. METHODS: We investigated the effects of AD-like tau pathology by Tandem mass tag proteomic and phosphoproteomic analysis, social behavioural tests, hippocampal electrophysiology, immunofluorescence staining and in vivo optical fibre recording of GCaMP6f and iGABASnFR. Additionally, we utilized optogenetics and administered ursolic acid (UA) via oral gavage to examine the effects of these agents on social memory in mice. RESULTS: The results of proteomic and phosphoproteomic analyses revealed the characteristics of ventral hippocampal CA1 (vCA1) under both physiological conditions and AD-like tau pathology. As tau progressively accumulated, vCA1, especially its excitatory and parvalbumin (PV) neurons, were fully filled with mislocated and phosphorylated tau (p-Tau). This finding was not observed for dorsal hippocampal CA1 (dCA1). The overexpression of human tau (hTau) in excitatory and PV neurons mimicked AD-like tau accumulation, significantly inhibited neuronal excitability and suppressed distinct discrimination-associated firings of these neurons within vCA1. Photoactivating excitatory and PV neurons in vCA1 at specific rhythms and time windows efficiently ameliorated tau-impaired social memory. Notably, 1 month of UA administration efficiently decreased tau accumulation via autophagy in a transcription factor EB (TFEB)-dependent manner and restored the vCA1 microcircuit to ameliorate tau-impaired social memory. CONCLUSION: This study elucidated distinct protein and phosphoprotein networks between dCA1 and vCA1 and highlighted the susceptibility of the vCA1 microcircuit to AD-like tau accumulation. Notably, our novel findings regarding the efficacy of UA in reducing tau load and targeting the vCA1 microcircuit may provide a promising strategy for treating AD in the future.

Assessing ammonium pollution and mitigation measures through a modified watershed non-point source model.

Watershed water quality modeling is a valuable tool for managing ammonium (NH4+) pollution. However, simulating NH4+ pollution presents unique challenges due to the inherent instability of NH4+ in natural environment. This study modified the widely-used Soil and Water Assessment Tool (SWAT) model to simulate non-point source (NPS) NH4+ processes, specifically incorporating the simulation of land-to-water NH4+ delivery. The Jiulong River Watershed (JRW) is the study area, a coastal watershed in Southeast China with substantial sewage discharge, livestock farming, and fertilizer application. The results demonstrate that the modified model can effectively simulate the NPS NH4+ processes. It is recommended to use multiple sets of observations to calibrate NH4+ simulation to enhance model reliability. Despite constituting a minor proportion (5.6 %), point source inputs significantly contribute to NH4+ load at watershed outlet (32.4∼51.9 %), while NPS inputs contribute 15.3∼17.3 % of NH4+ loads. NH4+ primarily enters water through surface runoff and lateral flow, with negligible leaching. Average NH4+ land-to-water delivery rate is about 2.35 to 2.90 kg N/ha/a. High delivery rates mainly occur at agricultural areas. Notably, proposed NH4+ mitigation measures, including urban sewage treatment enhancement, livestock manure management improvement, and fertilizer application reduction, demonstrate potential to collectively reduce the NH4+ load at watershed outlet by 1/4 to 1/3 and significantly enhance water quality standard compliance frequency. Insights gained from modeling experience in the JRW offer valuable implications for NH4+ modeling and management in regions with similar climates and significant anthropogenic nitrogen inputs.

Identification of SLC2A1 as a predictive biomarker for survival and response to immunotherapy in lung squamous cell carcinoma.

BACKGROUND: As one of the common subtypes of non-small lung cancer, lung squamous cell carcinoma (LUSC) patients with advanced stage have few choices of treatment strategies. Therefore, it is urgent to discover genes that are associated with the survival and efficacy of immunotherapies. METHOD: Differential gene expression analyses were conducted using TCGA LUSC bulk-sequencing and single-cell RNA-sequencing data. Prognostic genes were identified from the TCGA LUSC cohort. Protein expression validation and survival analyses were performed. Experiments were conducted to explore the underlying mechanisms. In addition, the correlation between gene expression and pathological response to adjuvant immunochemotherapy was also investigated. RESULTS: After a series of bioinformatic analyses, solute carrier family 2 member 1(SLC2A1), encoding glucose transporter-1 (GLUT1), was found to be differentially expressed between tumor and normal tissues. GLUT1 was subsequently identified as an independent prognostic factor for LUSC. GSEA analysis revealed the glycolysis metabolism pathway of KEGG enriched in SLC2A1high tumor tissues. LASSO analyses revealed that tumor tissues with high expression of SLC2A1 were associated with high levels of protein lactylation. We found that SLC2A1 was preferentially expressed by SPP1+ macrophages in the tumor microenvironment, and the expression of SLC2A1 was associated with the abundance of SPP1+ macrophages. Immunofluorescence demonstrated GLUT1 and HIF1α colocalization in tumor-infiltrating macrophages. In vitro experiments showed HIF-1α-induced macrophage polarization under hypoxia, and GLUT1 inhibition blocked this polarization. In addition, SLC2A1 was negatively associated with the common immune checkpoint molecules, such as programmed cell death 1(PD-1), T cell immunoreceptor with Ig and ITIM domains (TIGIT), cytotoxic T-lymphocyte associated protein 4 (CTLA4) and lymphocyte activating 3 (LAG3), while showed a positive association with CD44. Finally, we observed that there was a significant correlation between pre-adjuvant-treatment GLUT1 expression and the pathological response. CONCLUSION: SLC2A1 expression was differentially upregulated in tumor tissues, and elevated GLUT1 expression was associated with worse survival and poor pathological response to adjuvant immunochemotherapy. Upregulation of GLUT1 promoted macrophage polarization into the M2 phenotype. The findings will contribute to guiding the treatment selection for LUSC patients and providing personalized immunotherapy strategies.

Generation of tau dephosphorylation-targeting chimeras for the treatment of Alzheimer's disease and related tauopathies.

Abnormal hyperphosphorylation and accumulation of tau protein play a pivotal role in neurodegeneration in Alzheimer's disease (AD) and many other tauopathies. Selective elimination of hyperphosphorylated tau is promising for the therapy of these diseases. We have conceptualized a strategy, named dephosphorylation-targeting chimeras (DEPTACs), for specifically hijacking phosphatases to tau to debilitate its hyperphosphorylation. Here, we conducted the step-by-step optimization of each constituent motif to generate DEPTACs with reasonable effectiveness in facilitating the dephosphorylation and subsequent clearance of pathological tau. Specifically, for one of the selected chimeras, D16, we demonstrated its significant efficiency in rescuing the neurodegeneration caused by neurotoxic K18-tau seeds in vitro. Moreover, intravenous administration of D16 also alleviated tau pathologies in the brain and improved memory deficits in AD mice. These results suggested DEPTACs as targeted modulators of tau phosphorylation, which hold therapeutic potential for AD and other tauopathies.

2D Lateral Heterojunction Arrays with Tailored Interface Band Bending.

Two-dimensional (2D) lateral heterojunction arrays, characterized by well-defined electronic interfaces, hold significant promise for advancing next-generation electronic devices. Despite this potential, the efficient synthesis of high-density lateral heterojunctions with tunable interfacial band alignment remains a challenging. Here, a novel strategy is reported for the fabrication of lateral heterojunction arrays between monolayer Si2Te2 grown on Sb2Te3 (ML-Si2Te2@Sb2Te3) and one-quintuple-layer Sb2Te3 grown on monolayer Si2Te2 (1QL-Sb2Te3@ML-Si2Te2) on a p-doped Sb2Te3 substrate. The site-specific formation of numerous periodically arranged 2D ML-Si2Te2@Sb2Te3/1QL-Sb2Te3@ML-Si2Te2 lateral heterojunctions is realized solely through three epitaxial growth steps of thick-Sb2Te3, ML-Si2Te2, and 1QL-Sb2Te3 films, sequentially. More importantly, the precisely engineering of the interfacial band alignment is realized, by manipulating the substrate's p-doping effect with lateral spatial dependency, on each ML-Si2Te2@Sb2Te3/1QL-Sb2Te3@ML-Si2Te2 junction. Atomically sharp interfaces of the junctions with continuous lattices are observed by scanning tunneling microscopy. Scanning tunneling spectroscopy measurements directly reveal the tailored type-II band bending at the interface. This reported strategy opens avenues for advancing lateral epitaxy technology, facilitating practical applications of 2D in-plane heterojunctions.

Immobilization of C. elegans with different concentrations of an anesthetic for time-lapse imaging of dynamic protein trafficking in neurons.

Here we compare the percentage of anterograde and retrograde trafficking events as well as the average velocity of these events in worms immobilized with microbeads or 0.5-7.5 mM tetramisole. Our results show that the percentage and average velocity of TIR-1 ::GFP moving events in the C. elegans AWC axons are not significantly different between worms immobilized with 7.5 mM tetramisole and other conditions. Our results suggest that 7.5 mM tetramisole, compared to 0.5 mM, 1 mM, and 2 mM tetramisole, does not have a significant effect on the axonal transport of TIR-1 ::GFP along the AWC axons.

Mangiferin alleviates diabetic pulmonary fibrosis in mice via inhibiting endothelial-mesenchymal transition through AMPK/FoxO3/SIRT3 axis.

Diabetes mellitus results in numerous complications. Diabetic pulmonary fibrosis (DPF), a late pulmonary complication of diabetes, has not attracted as much attention as diabetic nephropathy and cardiomyopathy. Mangiferin (MF) is a natural small molecular compound that exhibits a variety of pharmacological effects including anti-inflammatory, anti-cancer, anti-diabetes, and anti-fibrosis effects. In this study, we investigated whether long-term diabetes shock induces DPF, and explored whether MF had a protective effect against DPF. We first examined the lung tissues and sections of 20 diabetic patients obtained from discarded lung surgical resection specimens and found that pulmonary fibrosis mainly accumulated around the pulmonary vessels, accompanied by significantly enhanced endothelial-mesenchymal transition (EndMT). We established a mouse model of DPF by STZ injections. Ten days after the final STZ injection, the mice were administered MF (20, 60 mg/kg, i.g.) every 3 days for 4 weeks, and kept feeding until 16 weeks and euthanized. We showed that pulmonary fibrotic lesions were developed in the diabetic mice, which began around the pulmonary vessels, while MF administration did not affect long-term blood glucose levels, but dose-dependently alleviated diabetes-induced pulmonary fibrosis. In human umbilical vein endothelial cells (HUVECs), exposure to high glucose (33.3 mM) induced EndMT, which was dose-dependently inhibited by treatment with MF (10, 50 µM). Furthermore, MF treatment promoted SIRT3 expression in high glucose-exposed HUVECs by directly binding to AMPK to enhance the activity of FoxO3, which finally reversed diabetes-induced EndMT. We conclude that MF attenuates DPF by inhibiting EndMT through the AMPK/FoxO3/SIRT3 axis. MF could be a potential candidate for the early prevention and treatment of DPF.

Efficient Production of Flavonoid Glucuronides in Escherichia coli Using Flavonoid O-Glucuronosyltransferases Characterized from Marchantia polymorpha.

As a model liverwort, Marchantia polymorpha contains various flavone glucuronides with cardiovascular-promoting effects and anti-inflammatory properties. However, the related glucuronosyltransferases have not yet been reported. In this study, two bifunctional UDP-glucuronic acid/UDP-glucose:flavonoid glucuronosyltransferases/glucosyltransferases, MpUGT742A1 and MpUGT736B1, were identified from M. polymorpha. Extensive enzymatic assays found that MpUGT742A1 and MpUGT736B1 exhibited efficient glucuronidation activity for flavones, flavonols, and flavanones and showed promiscuous regioselectivity at positions 3, 6, 7, 3', and 4'. These enzymes catalyzed the production of a variety of flavonoid glucuronides with medicinal value, including apigenin-7-O-glucuronide and scutellarein-7-O-glucuronide. With the use of MpUGT736B1, apigenin-4'-O-glucuronide and apigenin-7,4'-di-O-glucuronide were prepared by scaled-up enzymatic catalysis and structurally identified by NMR spectroscopy. MpUGT742A1 also displayed glucosyltransferase activity on the 7-OH position of the flavanones using UDP-glucose as the sugar donor. Furthermore, we constructed four recombinant strains by combining the pathway for increasing the UDP-glucuronic acid supply with the two novel UGTs MpUGT742A1 and MpUGT736B1. When apigenin was used as a substrate, the extracellular apigenin-4'-O-glucuronide and apigenin-7,4'-di-O-glucuronide production obtained from the Escherichia coli strain BB2 reached 598 and 81 mg/L, respectively. Our study provides new candidate genes and strategies for the biosynthesis of flavonoid glucuronides.

Structure-Guided Design and Synthesis of Pyridinone-Based Selective Bromodomain and Extra-Terminal Domain (BET)-First Bromodomain (BD1) Inhibitors.

The bromodomain and extra-terminal domain (BET) proteins are epigenetic readers, regulating transcription via two highly homologous tandem bromodomains, BD1 and BD2. Clinical development of nonselective pan-BD BET inhibitors has been challenging, partly due to dose-limiting side effects such as thrombocytopenia. This has prompted the push for domain-selective BET inhibitors to achieve a more favorable therapeutic window. We report a structure-guided drug design campaign that led to the development of a potent BD1-selective BET inhibitor, 33 (XL-126), with a Kd of 8.9 nM and 185-fold BD1/BD2 selectivity. The high selectivity was first assayed by SPR, validated by a secondary time-resolved fluorescence energy transfer assay, and further corroborated by BROMOscan (∼57-373 fold selectivity). The cocrystal of 33 with BRD4 BD1 and BD2 demonstrates the source of selectivity: repulsion with His437 and lost binding with the leucine clamp. Notably, the BD1 selectivity of BET inhibitor 33 leads to both the preservation of platelets and potent anti-inflammatory efficacy.

Optimizing skyrmionium movement and stability via stray magnetic fields in trilayer nanowire constructs.

Skyrmioniums, known for their unique transport and regulatory properties, are emerging as potential cornerstones for future data storage systems. However, the stability of skyrmionium movement faces considerable challenges due to the skyrmion Hall effect, which is induced by deformation. In response, our research introduces an innovative solution: we utilized micro-magnetic simulations to create a sandwiched trilayer nanowire structure augmented with a stray magnetic field. This combination effectively guides the skyrmionium within the ferromagnetic (FM) layer. Our empirical investigations reveal that the use of a stray magnetic field not only reduces the size of the skyrmionium but also amplifies its stability. This dual-effect proficiently mitigates the deformation of skyrmionium movement and boosts their thermal stability. We find these positive outcomes are most pronounced at a particular intensity of the stray magnetic field. Importantly, the required stray magnetic field can be generated using a heavy metal (HM1) layer of suitable thickness, rendering the practical application of this approach plausible in real-world experiments. Additionally, we analyze the functioning mechanism based on the Landau-Lifshitz-Gilbert (LLG) equation and energy variation. We also develop a deep spiking neural network (DSNN), which achieves a remarkable recognition accuracy of 97%. This achievement is realized through supervised learning via the spike timing dependent plasticity rule (STDP), considering the nanostructure as an artificial synapse device that corresponds to the electrical properties of the nanostructure. In conclusion, our study provides invaluable insights for the design of innovative information storage devices utilizing skyrmionium technology. By tackling the issues presented by the skyrmion Hall effect, we outline a feasible route for the practical application of this advanced technology. Our research, therefore, serves as a robust platform for continued investigations in this field.

Efficient spatial separation of charge carriers over Sv-ZnIn2S4/NH2-MIL-88B(Fe) S-scheme heterojunctions for enhanced photocatalytic H2 evolution and antibiotics removal performance.

The exploration of highly efficient sunlight-assisted photocatalyst for photodegradation of organic contaminants or energy conversion is strongly encouraged. In this work, we designed a novel three-dimensional spindle-like Sv-ZIS@NMFe heterojunction made of amino functionalized NH2-MIL-88B(Fe) (NMFe) and ZnIn2S4 nanosheets with abundant sulfur vacancies (Sv-ZIS). The structural properties of NMFe materials, such as a clearly defined system of pores and cavities, were retained by the Sv-ZIS@NMFe composites. Additionally, the incorporation of sulfur vacancies, -NH2 functional groups, and well-matched energy level positions led to various synergistic effects that considerably enhanced internal electron transformation and migration, as well as improved adsorption performance. Consequently, under visible light irradiation, the optimized sample exhibited superior hydrogen production activity and tetracycline hydrochloride photodegradation performance. At last, density functional theory calculations was used to further elucidated the possible photoreactivity mechanism. This study demonstrates that the Sv-ZIS@NMFe heterojunction materials formed by ZnIn2S4 with suitable sulfur vacancies and amino functionalized Fe-MOFs have promising applications in photocatalysis.

Contact engineering for 2D Janus MoSSe/metal junctions.

The flourish of two-dimensional (2D) materials provides a versatile platform for building high-performance electronic devices in the atomic thickness regime. However, the presence of the high Schottky barrier at the interface between the metal electrode and the 2D semiconductors, which dominates the injection and transport efficiency of carriers, always limits their practical applications. Herein, we show that the Schottky barrier can be controllably lifted in the heterostructure consisting of Janus MoSSe and 2D vdW metals by different means. Based on density functional theory calculations and machine learning modelings, we studied the electrical contact between semiconducting monolayer MoSSe and various metallic 2D materials, where a crossover from Schottky to Ohmic/quasi-Ohmic contact is realized. We demonstrated that the band alignment at the interface of the investigated metal-semiconductor junctions (MSJs) deviates from the ideal Schottky-Mott limit because of the Fermi-level pinning effects induced by the interface dipoles. Besides, the effect of the thickness and applied biaxial strain of MoSSe on the electronic structure of the junctions are explored and found to be powerful tuning knobs for electrical contact engineering. It is highlighted that using the sure-independence-screening-and-sparsifying-operator machine learning method, a general descriptor WM3/exp(Dint) was developed, which enables the prediction of the Schottky barrier height for different MoSSe-based MSJ. These results provide valuable theoretical guidance for realizing ideal Ohmic contacts in electronic devices based on the Janus MoSSe semiconductors.

Experimental Realization of Monolayer α-Tellurene.

2D materials emerge as a versatile platform for developing next-generation devices. The experimental realization of novel artificial 2D atomic crystals, which does not have bulk counterparts in nature, is still challenging and always requires new physical or chemical processes. Monolayer α-tellurene is predicted to be a stable 2D allotrope of tellurium (Te), which has great potential for applications in high-performance field-effect transistors. However, the synthesis of monolayer α-tellurene remains elusive because of its complex lattice configuration, in which the Te atoms are stacked in tri-layers in an octahedral fashion. Here, a self-assemble approach, using three atom-long Te chains derived from the dynamic non-equilibrium growth of an a-Si:Te alloy as building blocks, is reported for the epitaxial growth of monolayer α-tellurene on a Sb2 Te3 substrate. By combining scanning tunneling microscopy/spectroscopy with density functional theory calculations, the surface morphology and electronic structure of monolayer α-tellurene are revealed and the underlying growth mechanism is determined. The successful synthesis of monolayer α-tellurene opens up the possibility for the application of this new single-element 2D material in advanced electronic devices.