Ultrathin Ga2O3 Photodetector with Fast Response and Trajectory Tracking Capability Fabricated by Liquid Metal Oxidation.

Low-dimensional Ga2O3 demonstrates a unique ultraviolet photoresponse and could be used in various electronic and optical systems. However, the low-dimensional Ga2O3 photodetector is faced with the challenges of a complex preparation process and poor device performance. In this work, ultrathin Ga2O3 layers with ∼7 nm thickness are prepared on quartz rods by UV exposure to liquid gallium. Benefiting from low-density oxygen vacancy defects cured by UV exposure, the low-dimensional Ga2O3 photodetector exhibits a high response speed (rise: 64.7 µs; fall: 51.4 µs) and an exceptional linear dynamic range of 120 dB. Furthermore, the photodetector array based on these ultrathin Ga2O3 shows an effective trajectory tracking capability by monitoring UV source motion. This work develops a simple preparation method to construct a low-dimensional UV photodetector array with fast response and useful trajectory tracking capability, exhibiting the significance of ultrathin Ga2O3 in UV optoelectronics.

Development and CO2 capture of nitrogen-enriched microporous carbon by coupling waste polyamides with lignocellulosic biomass.

Due to the substantial emissions of global CO2, there has been growing interest in nitrogen-enriched porous carbonaceous materials that possess exceptional CO2 capture capabilities. In this study, a novel N-enriched microporous carbon was synthesized by integrating waste polyamides with lignocellulosic biomass, involving carbonization and physicochemical activation. As-synthesized adsorbents demonstrated significant characteristics including a high specific surface area (1710 m2/g) and a large micropore volume (0.497 cm3/g), as well as abundant N- and O-containing functional groups, achieved through activation at 700 °C. They displayed remarkable CO2 capture capability, achieving uptake levels of up to 6.71 mmol/g at 1 bar and 0 °C, primarily due to the filling effect of narrow micropore along with electrostatic interaction. Furthermore, the adsorbent exhibited a rapid capacity for CO2 capture, achieving 94.9% of its saturation capacity within a mere 5 min at 30 °C. This impressive performance was accurately described by the pseudo second-order dynamic model. Additionally, as-synthesized adsorbents displayed a moderate isosteric heat of CO2 adsorption, as well as superior selectivity over N2. Even after undergoing five consecutive cycles, it maintained ∼100% of its initial capacity. Undoubtedly, such findings hold immense significance in the mitigation of global plastic pollution and greenhouse effect.

Influential Factors for Self-Management Among Patients with Diabetic Retinopathy: A Structural Equation Model Analysis.

Purpose: To investigate the influencing factors of self-management of diabetic retinopathy (DR) by constructing a structural equation model (SEM) to analyze the relationships among self-management behavior, perceived social support, and trait coping style as well as to determine the influencing path in order to provide a theoretical reference for exploring a multipath health management model that can be used to improve the quality of life of DR patients. Patients and Methods: A total of 388 patients with DR were enrolled in this cross-sectional study conducted from January 2020 to January 2023. All subjects completed a general questionnaire and were assessed by the Self-management Scale for Patients with Diabetic Retinopathy, the Perceived Social Support Scale, and the Trait Coping Style Scale. Structural equation modeling was employed to examine the relationship between self-management and its influencing factors. The bootstrap method was used to examine the path relationships among self-management, perceived social support, and trait coping styles in DR patients. Results: A total of 346 valid questionnaires were collected in this study, with a response rate of 89% (346/388). The average score of self-management of DR patients was 69.50±18.32, and it was significantly positively correlated with perceived social support and positive coping (r=0.624, r=0.578, both P<0.01). The total effect of perceived social support on DR self-management was 1.439, with a direct effect of 1.056 and an indirect effect of 0.384. Positive coping played a mediating role in perceived social support and self-management. Conclusion: The self-management of DR was at an intermediate level. Perceived social support and trait coping styles were important influencing factors for self-management behavior in DR patients. Therefore, improving perceived social support and trait coping styles can promote the self-management behavior of DR patients, reduce their psychological burden, and improve their compliance and quality of life.

Incremental Prognostic Value of Coronary Hyper-intensity Plaque on Non-contrast Cardiac Magnetic Resonance with Global Longitudinal Strain for Major Adverse Cardiac Events in Patients with Acute Coronary Syndrome.

RATIONALE AND OBJECTIVES: This study aims to determine the long-term prognostic value of coronary hyper-intensity plaques and left ventricular (LV) myocardial strain for major adverse cardiac events (MACEs). MATERIALS AND METHODS: The study prospectively recruited 71 patients with acute coronary syndrome (ACS). All patients underwent CMR before PCI to determine the plaque-to-myocardium signal intensity ratio and LV strains. The MACEs included all-cause death, reinfarction, and new congestive heart failure. Mann-Whitney U test and chi-square test to compare patients with and without MACE, Kaplan-Meier survival analysis, Cox proportional hazards regression and C-statistics to assess prognosis, Receiver-operating characteristic (ROC) curve analysis to define the cutoff value. A P value of < 0.05 was considered statistically significant. RESULTS: Cox proportional hazard analysis showed that plaque-to-myocardium signal intensity ratio and global longitudinal strain (GLS) were independently associated with MACEs (plaque-to-myocardium signal intensity ratio: hazard ratio (HR) 2.80, 95% CI, 1.25-6.26, P = 0.01; GLS: HR1.21, 95% CI, 1.07-1.38, P＜0.01). ROC showed that a plaque-to-myocardium signal intensity ratio of 1.65 and a GLS of -10% were the best cutoff values for MACEs. The C-statistic values for plaque-to-myocardium signal intensity ratio, GLS, and plaque-to-myocardium signal intensity ratio+GLS for MACEs were 0.691, 0.792, and 0.825, respectively. Compared to GLS alone, the addition of plaque-to-myocardium signal intensity ratio to GLS increased the net reclassification index by 0.664 (P = 0.017). CONCLUSION: Plaque-to-myocardium signal intensity ratio and GLS were significantly associated with MACEs. Adding plaque-to-myocardium signal intensity ratio to GLS substantially improved the prediction for MACEs. Our findings indicate that plaque-to-myocardium signal intensity ratio combined with GLS provides incremental prognostic value for MACEs.

Hemispherical Retina Emulated by Plasmonic Optoelectronic Memristors with All-Optical Modulation for Neuromorphic Stereo Vision.

Binocular stereo vision relies on imaging disparity between two hemispherical retinas, which is essential to acquire image information in three dimensional environment. Therefore, retinomorphic electronics with structural and functional similarities to biological eyes are always highly desired to develop stereo vision perception system. In this work, a hemispherical optoelectronic memristor array based on Ag-TiO2 nanoclusters/sodium alginate film is developed to realize binocular stereo vision. All-optical modulation induced by plasmonic thermal effect and optical excitation in Ag-TiO2 nanoclusters is exploited to realize in-pixel image sensing and storage. Wide field of view (FOV) and spatial angle detection are experimentally demonstrated owing to the device arrangement and incident-angle-dependent characteristics in hemispherical geometry. Furthermore, depth perception and motion detection based on binocular disparity have been realized by constructing two retinomorphic memristive arrays. The results demonstrated in this work provide a promising strategy to develop all-optically controlled memristor and promote the future development of binocular vision system with in-sensor architecture.

Tri-signal CdS@SiO2 nanoprobes for accurate and sensitive detection of human immunoglobulin G with enhanced flexibility and internal validation.

Accurate and sensitive determination of human immunoglobulin G (HIgG) level is critical for diagnosis and treatment of various diseases, including rheumatoid arthritis, humoral immunodeficiencies, and infectious disease. In this study, versatile tri-signal probes were developed by preparing CdS@SiO2 nanorods that integrate photoluminescence (PL), multi-phonon resonant Raman scattering (MRRS) and infrared absorption (IRA) properties. Through the coating of multiple CdS nanoparticles as cores within SiO2 shells, the PL and MRRS properties of CdS were improved, resulting in a significantly lowered limit of detection (LOD), with the lowest LOD of 12.37 ag mL-1. Integration with the distinctive IRA property of SiO2 shells widened the detection range towards higher concentrations, establishing a final linear range of 50 ag mL-1 to 10 µg mL-1. The remarkable consistency among the three signals highlighted the robust internal verification capability for accurate detection. This approach enhances flexibility in selecting detection methodologies to suit diverse scenarios, facilitating HIgG detection. The tri-signal nanoprobes also exhibited excellent detection selectivity, specificity and repeatability. This study presents a fresh idea for developing high-performance detection strategies.

Feature Mixture on Pre-Trained Model for Few-Shot Learning.

Few-shot learning (FSL) aims at recognizing a novel object under limited training samples. A robust feature extractor (backbone) can significantly improve the recognition performance of the FSL model. However, training an effective backbone is a challenging issue since 1) designing and validating structures of backbones are time-consuming and expensive processes, and 2) a backbone trained on the known (base) categories is more inclined to focus on the textures of the objects it learns, which is hard to describe the novel samples. To solve these problems, we propose a feature mixture operation on the pre-trained (fixed) features: 1) We replace a part of the values of the feature map from a novel category with the content of other feature maps to increase the generalizability and diversity of training samples, which avoids retraining a complex backbone with high computational costs. 2) We use the similarities between the features to constrain the mixture operation, which helps the classifier focus on the representations of the novel object where these representations are hidden in the features from the pre-trained backbone with biased training. Experimental studies on five benchmark datasets in both inductive and transductive settings demonstrate the effectiveness of our feature mixture (FM). Specifically, compared with the baseline on the Mini-ImageNet dataset, it achieves 3.8% and 4.2% accuracy improvements for 1 and 5 training samples, respectively. Additionally, the proposed mixture operation can be used to improve other existing FSL methods based on backbone training.

Adaptive Processing Enabled by Sodium Alginate Based Complementary Memristor for Neuromorphic Sensory System.

Adaptive processing allows sensory systems to autonomically adjust their sensitivity with exposure to a constant sensory stimulus and thus organisms to adapt to environmental variations. Bioinspired electronics with adaptive functions are highly desirable for the development of neuromorphic sensory systems (NSSs). Herein, the functions of desensitization and sensitivity changing with background intensity (i.e., Weber's law), as two fundamental cues of sensory adaptation, are biorealistically demonstrated in an Ag nanowire (NW)-embedded sodium alginate (SA) based complementary memristor. In particular, Weber's law is experimentally emulated in a single complementary memristor. Furthermore, three types of adaptive NSS unit are constructed to realize a multiple perceptual capability that processes the stimuli of illuminance, temperature, and pressure signals. Taking neuromorphic vision as an example, scotopic and photopic adaptation functions are well reproduced for image enhancement against dark and bright backgrounds. Importantly, an NSS system with multisensory integration function is demonstrated by combining light and pressure spikes, where the accuracy of pattern recognition is obviously enhanced relative to that of an individual sense. This work offers a new strategy for developing neuromorphic electronics with adaptive functions and paves the way toward developing a highly efficient NSS.

Enhanced Performance of Self-Powered Ga2O3/ZnO:V Heterojunction Solar-Blind Ultraviolet Photodetectors by Coupling Ferroelectricity and Piezoelectricity.

Ferroelectric materials have aroused increasing interest in the field of self-powered ultraviolet (UV) photodetectors (PDs) for their switchable spontaneous polarization. However, the utilization of ferroelectric materials to modulate the built-in electric field and energy band at the junction interface has rarely been investigated. Herein, we design and fabricate self-powered solar-blind UV PDs based on a Ga2O3/ZnO:V heterojunction. The performance of the Ga2O3/ZnO:V PD is significantly enhanced through the reasonable coupling of ferroelectricity and piezoelectricity within the ZnO:V film. The device at 260 nm exhibits excellent photoelectric properties with high peak responsivity of 64.5 mA/W, a specific detectivity of 3.8 × 1010 Jones, and a rise/decay time of 1.9/45.2 µs, together with reproducibility and stability. Systematical energy band diagram analysis reveals that the excellent performance of Ga2O3/ZnO:V PD can be attributed to the driving forces arising from the addition of the depolarization field and piezoelectric field, which increases the intensity of built-in electric field and promotes the separation and transport of photogenerated carriers at the heterojunction interface. The findings of our research provide a novel avenue and valuable guidance for the design of high-performance self-powered photodetectors.

Efficient Carrier Multiplication in Self-Powered Near-Ultraviolet γ-InSe/Graphene Heterostructure Photodetector with External Quantum Efficiency Exceeding 161.

Carrier multiplication (CM) in semiconductors, the process of absorbing a single high-energy photon to form two or more electron-hole pairs, offers great potential for the high-response detection of high-energy photons in the ultraviolet spectrum. However, compared to two-dimensional semiconductors, conventional bulk semiconductors not only face integration and flexibility bottlenecks but also exhibit inferior CM performance. To attain efficient CM for ultraviolet detection, we designed a two-terminal photodetector featuring a unilateral Schottky junction based on a two-dimensional γ-InSe/graphene heterostructure. Benefiting from a strong built-in electric field, the photogenerated high-energy electrons in γ-InSe, an ideal ultraviolet light-absorbing layer, can efficiently transfer to graphene without cooling. It results in efficient CM within the graphene, yielding an ultrahigh responsivity of 468 mA/W and a record-high external quantum efficiency of 161.2% when it is exposed to 360 nm light at zero bias. This work provides valuable insights into developing next-generation ultraviolet photodetectors with high performance and low-power consumption.

Immunogenicity of Tetravalent Protein Vaccine SCTV01E-2 against SARS-CoV-2 EG.5 Subvaraint: A Phase 2 Trial.

The Omicron EG.5 lineage of SARS-CoV-2 is currently on a trajectory to become the dominant strain. This phase 2 study aims to evaluate the immunogenicity of SCTV01E-2, a tetravalent protein vaccine, with a specific emphasis on its immunogenicity against Omicron EG.5, comparing it with its progenitor vaccine, SCTV01E (NCT05933512). As of 12 September 2023, 429 participants aged ≥18 years were randomized into the groups SCTV01E (N = 215) and SCTV01E-2 (N = 214). Both vaccines showed increases in neutralizing antibody (nAb) against Omicron EG.5, with a 5.7-fold increase and a 9.0-fold increase in the SCTV01E and SCTV01E-2 groups 14 days post-vaccination, respectively. The predetermined statistical endpoints were achieved, showing that the geometric mean titer (GMT) of nAb and the seroresponse rate (SRR) against Omicron EG.5 were significantly higher in the SCTV01E-2 group than in the SCTV01E group. Additionally, SCTV01E and SCTV01E-2 induced a 5.5-fold and a 5.9-fold increase in nAb against XBB.1, respectively. Reactogenicity was generally mild and transient. No vaccine-related serious adverse events (SAEs), adverse events of special interest (AESIs), or deaths were reported. In summary, SCTV01E-2 elicited robust neutralizing responses against Omicron EG.5 and XBB.1 without raising safety concerns, highlighting its potential as a versatile COVID-19 vaccine against SARS-CoV-2 variants.

Role of HIF-1α in hypercoagulable state of COPD in rats.

OBJECTIVE: To explore the role of HIF-1α in hypercoagulable state of COPD induced by lipopolysaccharide plus smoking in rats. It also has to explore the regulatory mechanism of HIF-1α-EPO/EDN-1/VEGF pathway by using its activator and inhibitor. METHODS: 60 Sprague-Dawley rats (SD rats) were randomly divided into healthy control group, COPD hypercoagulable control group, activator group, and inhibitor group with 15 rats in each group. The healthy control group was fed freely. The other groups were given smoke and lipopolysaccharide by tracheal instillation to establish the experimental animal model of COPD hypercoagulability. After successful modeling, each experimental group was given 0.9 % sodium chloride solution and corresponding drugs by intraperitoneal injection for 7 days. Lung function was detected after drug administration. Hematoxylin-eosin staining was used to observe the pathological changes of lung tissue. Enzyme-linked immunosorbent assay was used to detect serum D-D,F (1 + 2),IL-6,TNF-α. The mRNA expressions of HIF-1α, EPO, EDN-1, and VEGF were detected by RT-PCR. Western-Blot and IHC were used to detect the expression of HIF-1α, EPO, EDN-1, and VEGF in lung tissue of rats. RESULTS: Compared with the healthy control group, rats in COPD hypercoagulable control group had COPD symptoms/signs, decreased lung function, increased the expression of serum D-D and F (1 + 2), increased the expression of inflammatory factors IL-6,TNF-α, and increased the expression of proteins HIF-1α, EPO, EDN-1 and VEGF. Compared with COPD hypercoagulable control group, lung function in activator group and inhibitor group had no obvious changes. The expressions of serum D-D,F (1 + 2),IL-6,TNF-α in activator group have increased noticeably. The expressions of proteins HIF-1α, EPO, EDN-1, and VEGF have further increased. Compared with COPD hypercoagulable control group, the expression of serum D-D, F (1 + 2), HIF-1α, EPO, EDN-1, and VEGF in the inhibitor group decreased. CONCLUSION: HIF-1α-EPO/EDN-1/VEGF pathway plays an important role in the hypercoagulable state of COPD. HIF-1α inhibitor can improve airway inflammation and reduce hypercoagulability in COPD model rats.

Low temperature and facile synthesis of nitrogen-doped hierarchical porous carbon derived from waste polyethylene terephthalate for efficient CO2 capture.

Waste polyethylene terephthalate (PET) with high carbon content (>60 wt%) has shown great potential in the field of synthesizing carbon materials for CO2 capture, attracting increasing attention. Herein, an innovative strategy was proposed to synthesize nitrogen-doped hierarchical porous carbon (PC) for CO2 capture using PET as precursor and sodium amide (NaNH2) as both nitrogen dopant and low-temperature activator. As-synthesized N-doped PC exhibited a significantly high micropore volume of 0.755 cm3/g and a rich content of N- and O-containing functional groups, offering ample active sites for CO2 molecules. Further, the adsorbents demonstrated excellent CO2 capture capacity, achieving 5.7 mmol/g (0 °C) and 3.3 mmol/g (25 °C) at 1 bar, respectively. This was primarily attributed to the synergistic effect of narrow micropores filling and electrostatic interactions. Moreover, as-synthesized PC exhibited rapid CO2 adsorption capability, and its dynamic adsorption process was effectively described using a pseudo-second-order kinetic model. After five consecutive cycles, PET-derived PC still maintained ~100 % of adsorption capacity. They also possessed good CO2/N2 selectivity and reasonable isosteric heat of adsorption. Therefore, as-synthesized nitrogen-doped PC is a promising CO2 adsorbent through low-temperature activation of carbonized PET with NaNH2. Such findings have substantial implications for waste plastic recycling and mitigating the greenhouse effect.

Ti3C2Tx MXene- and Sulfuric Acid-Treated Double-Network Hydrogel with Ultralow Conductive Filler Content for Stretchable Electromagnetic Interference Shielding.

Hydrogels are emerging as stretchable electromagnetic interference (EMI) shielding materials because of their tissue-like mechanical properties and water-rich porous cellular structures. However, achieving high-performance hydrogel shields remains a challenge because enhancing conductivity often results in a compromise in deformation adoptability. This work proposes a treatment strategy involving sulfuric acid/titanium carbide MXene, which can simultaneously enhance the conductivity and stretchability of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/poly(vinyl alcohol) (PVA) double-network hydrogels. Multiple spectroscopic characterizations reveal that sulfuric acid promotes the linear conformation transition of the PEDOT molecular chain, while MXene increases charge delocalization and hydrogen bond cross-linking sites. The hydrogels, synthesized with a combined content of 0.6 wt % of MXene and PEDOT:PSS, exhibit an average X-band EMI SE of 41 dB. This performance is sustained at 94.5%, even following stretching and release at a strain of 200%. Interestingly, the EMI SE is found to linearly increase, reaching a value of 99 dB as the frequency is increased to 26.5 GHz. This increase is attributed to the enhanced water molecular polarization process, as supported by theoretical calculations of the impedance and attenuation constant. This work introduces a post-treatment technique that optimizes double-network hydrogels, providing deep insights into their EMI shielding mechanism and enabling high-performance EMI shielding with an ultralow conductive filler content.

Low-Dimensional-Materials-Based Photodetectors for Next-Generation Polarized Detection and Imaging.

The vector characteristics of light and the vectorial transformations during its transmission lay a foundation for polarized photodetection of objects, which broadens the applications of related detectors in complex environments. With the breakthrough of low-dimensional materials (LDMs) in optics and electronics over the past few years, the combination of these novel LDMs and traditional working modes is expected to bring new development opportunities in this field. Here, the state-of-the-art progress of LDMs, as polarization-sensitive components in polarized photodetection and even the imaging, is the main focus, with emphasis on the relationship between traditional working principle of polarized photodetectors (PPs) and photoresponse mechanisms of LDMs. Particularly, from the view of constitutive equations, the existing works are reorganized, reclassified, and reviewed. Perspectives on the opportunities and challenges are also discussed. It is hoped that this work can provide a more general overview in the use of LDMs in this field, sorting out the way of related devices for "more than Moore" or even the "beyond Moore" research.

Kinetic constants and transformation products of ornidazole during ozonation.

Ornidazole (ONZ), a nitroimidazole antibiotic detected in water bodies, may negatively impact the aquatic ecosystem. Its reaction kinetics during ozonation which is a feasible and applicable technology to control the contamination of emerging contaminants, however, has not been reported in literature. In this study, we measured the apparent second-order kinetic constant of ONZ with ozone molecules via the excessive ozone method and the competing method which led to an average value of 103.8 ± 2.7 M-1 s-1 at pH 7. The apparent second-order kinetic constant of ONZ with HO• was calculated to be 4.65 × 109 M-1 s-1 with the concept of Rct measured via para-chlorobenzoic acid as a probe. The transformation products (TPs) of ONZ during ozonation at pH 3 and pH 11 were separately analyzed with HPLC-MS/MS and some unique products were found at pH 11, reflecting the influence of HO•. The toxicity of individual TPs was predicted with the tool of T.E.S.T. It was found that 62% of 21 identified TPs could be more toxic than ONZ in terms of at least one acute toxicity endpoint, including chlorinated amines and N-oxides. The analysis with a respirometer further revealed that the toxicity of mixing TPs generated at HO• rich conditions was slightly lower than O3 dominated conditions. In general, this study provides the basic kinetic data for designing ozonation processes to eliminate ONZ and the important reference for understanding the toxicity evolution of ONZ during ozonation.

Dynamic polarization-regulated metasurface with variable focal length.

Polarization and focal length are both critical optical parameters with many applications in many fields, such as optical communications and imaging. The development of metasurfaces provides a new realization of optical systems. In this paper, based on metasurfaces' powerful electromagnetic modulation capability, we integrate polarization conversion with continuous zoom function and propose a dynamic polarization-regulated metasurface with variable focal length. It realizes the reversible conversion of polarization state, which can convert linearly polarized light into elliptically polarized light and circularly polarized light and convert circularly polarized light to linearly polarized light. At the same time, it achieves a 4.4× zoom range, with a constant focal length variation from 70 µm to 309 µm. The metasurface has the advantages of small size, easy integration, and reconfigurability, providing a new design idea for complex functional optical systems.

Acupuncture combined with mifepristone improves sex hormones and inflammatory factors in patients with uterine fibroids.

OBJECTIVE: To analyze the therapeutic effect of acupuncture combined with mifepristone on uterine fibroids and its influence on sex hormones and inflammatory factors. METHODS: Data of 102 patients with uterine fibroids admitted to Shanxi Provincial Hospital of Chinese Medicine from January 2019 to January 2022 were retrospectively analyzed. Among them, there were 50 patients treated with mifepristone alone (control group) and 52 patients undergoing combined treatment of acupuncture and mifepristone (observation group). After 2 months of continuous treatment, the therapeutic efficacy, volume of uterine fibroids and uterus, levels of inflammatory factors (C-reactive protein (CRP) and tumor necrosis factor-α (TNF-α)), as well as levels of estradiol (E2), follicle-stimulating hormone (FSH) and luteinizing hormone (LH), along with hemodynamic levels and incidence of adverse reactions were recorded and compared between the two groups. Logistic analysis was employed to identify the independent risk factors for the recurrence of uterine fibroids in patients. RESULTS: Compared with the control group, the observation group was identified with significantly higher overall response rate (P < 0.05). The uterine fibroid volume and uterine volume significantly improved in both groups after treatment, and the improvements were more prominent in the observation group than in the control group (P < 0.05). After treatment, the serum CRP and TNF-α were both evidently decreased in the two groups, while levels of E2, FSH, LH and peak blood flow velocity were significantly ameliorated, and the improvements in the observation group were more significant than those in the control group (P < 0.05). There was no significant difference in the incidence of adverse reactions between the two groups (P > 0.05). Alcohol intake and treatment regime were independent risk factors for the recurrence of uterine fibroids in patients. CONCLUSION: Combining acupuncture with mifepristone can significantly improve uterine fibroids, estrogen and progesterone levels, as well as reduce inflammation, with a high level of safety, making it a promising treatment for clinical use.

Carotid massive intraplaque hemorrhage, lipid-rich necrotic core, and heavy circumferential calcification were associated with new ipsilateral ischemic cerebral lesions after carotid artery stenting: high-resolution magnetic resonance vessel wall imaging study.

Background: Following carotid artery stenting (CAS), new ipsilateral ischemic lesions (NIILs) in the brain are frequently seen using diffusion-weighted imaging (DWI). This study's goal was to identify the imaging characteristics associated with NIILs after CAS by high-resolution magnetic resonance vessel wall imaging (HR-VWI). Methods: This was a case-control study. 109 patients who received CAS for atherosclerotic carotid stenosis were retrospectively collected and categorized into NIILs positive and NIILs negative groups. Based on the existence or absence of stroke symptoms after CAS, the NIILs positive group was split into two subgroups: the NIILs symptomatic group and the NIILs asymptomatic group. Patients underwent preoperative HR-VWI and brain magnetic resonance imaging (MRI) within 7 days preoperatively and within 3 days postoperatively. Quantitatively assess carotid plaque burden and components using HR-VWI. The baseline and HR-VWI imaging characteristics of all patients were retrospectively analyzed. To ascertain the imaging characteristics connected with NIILs after CAS, logistic regression analysis was carried out. Results: Among 109 patients, 38 patients (34.9%) developed NIILs after CAS. Six patients (5.5%) developed symptomatic stroke with NIILs. The logistic regression analysis revealed that maximum wall thickness (Max WT) [odds ratio (OR), 1.53; 95% confidence interval (CI): 1.20-1.96; P=0.001], the maximum area percentage of lipid-rich necrotic core (LRNC) (OR, 1.05; 95% CI: 1.03-1.07; P<0.001), the volume of LRNC (OR, 1.004; 95% CI: 1.002-1.005; P<0.001), the maximum area percentage of intraplaque hemorrhage (IPH) (OR, 1.17; 95% CI: 1.11-1.24; P<0.001), the volume of IPH (OR, 1.06; 95% CI: 1.03-1.08; P<0.001), and maximum circumference score of calcification in a single slice (OR, 1.66; 95% CI: 1.04-2.63; P=0.03) were linked with NIILs following CAS. Conclusions: The massive IPH, LRNC, and heavy circumferential calcification were associated with NIILs after CAS. Preoperative quantitative assessment of carotid plaque using HR-VWI may be useful for predicting NIILs following CAS.

Characterization, production optimization, and fructanogenic traits of levan in a new Microbacterium isolate.

Levan is a high-valued ß-(2,6)-linked fructan with promising physicochemical and physiological properties and has diverse potential applications in the food, nutraceutical, pharmaceutical and cosmetic industry, but its commercial availability is still restricted to the relatively high costs of production. In this study, a strain identified as Microbacterium sp. XL1 was isolated from soil and highly produced exopolysaccharide (EPS). HPLC, FTIR and NMR spectroscopy revealed XL1-EPS is a levan-type fructan connected by ß-(2, 6) linkages. SEM, DLS and TGA-DSC analysis showed that XL1-EPS processed high morphological versatility, narrow size distribution in its solutions and excellent thermal stability. The levan yield reached 83.67 ± 4.06 g/L with corresponding productivity of 3.49 ± 0.17 g/L/h and a conversion yield of 39.8 ± 1.9 % using sucrose (210 g/L) as substrates under the optimal cultivation conditions concluded by the response surface methodology (RSM). More strikingly, the XL1 strain also has multi-type fructanases to generate levanbiose, kestose, DFA IV and other L-FOSs. These results suggest Microbacterium sp. XL1 is a promising strain to produce levan and can provide various levan/inulin-degrading enzymes to create a great diversity of FOSs.