Comparing the Potential of Silicon Nanoparticles and Conventional Silicon for Salinity Stress Alleviation in Soybean (Glycine max L.): Growth and Physiological Traits and Rhizosphere/Endophytic Bacterial Communities.

In this study, 20-day-old soybean plants were watered with 100 mL of 100 mM NaCl solution and sprayed with silica nanoparticles (SiO2 NPs) or potassium silicate every 3 days over 15 days, with a final dosage of 12 mg of SiO2 per plant. We assessed the alterations in the plant's growth and physiological traits, and the responses of bacterial microbiome within the leaf endosphere, rhizosphere, and root endosphere. The result showed that the type of silicon did not significantly impact most of the plant parameters. However, the bacterial communities within the leaf and root endospheres had a stronger response to SiO2 NPs treatment, showing enrichment of 24 and 13 microbial taxa, respectively, compared with the silicate treatment, which led to the enrichment of 9 and 8 taxonomic taxa, respectively. The rhizosphere bacterial communities were less sensitive to SiO2 NPs, enriching only 2 microbial clades, compared to the 8 clades enriched by silicate treatment. Furthermore, SiO2 NPs treatment enriched beneficial genera, such as Pseudomonas, Bacillus, and Variovorax in the leaf and root endosphere, likely enhancing plant growth and salinity stress resistance. These findings highlight the potential of SiO2 NPs for foliar application in sustainable farming by enhancing plant-microbe interactions to improve salinity tolerance.

The Model Study of Phase-Transitional Magnetic-Driven Micromotors for Sealing Gastric Perforation via Mg-Based Micropower Traction.

Gastric perforation refers to the complete rupture of the gastric wall, leading to the extravasation of gastric contents into the thoracic cavity or peritoneum. Without timely intervention, the expulsion of gastric contents may culminate in profound discomfort, exacerbating the inflammatory process and potentially triggering perilous sepsis. In clinical practice, surgical suturing or endoscopic closure procedures are commonly employed. Magnetic-driven microswarms have also been employed for sealing gastrointestinal perforation. However, surgical intervention entails significant risk of bleeding, while endoscopic closure poses risks of inadequate closure and the need for subsequent removal of closure clips. Moreover, the efficacy of microswarms is limited as they merely adhere to the perforated area, and their sealing effect diminishes upon removal of the magnetic field. Herein, we present a Fe&Mg@Lard-Paraffin micromotor (LPM) constructed from a mixture of lard and paraffin coated with magnesium (Mg) microspheres and iron (Fe) nanospheres for sutureless sealing gastric perforations. Under the control of a rotating magnetic field, this micromotor demonstrates precise control over its movement on gastric mucosal folds and accurately targets the gastric perforation area. The phase transition induced by the high-frequency magnetothermal effect causes the micromotor composed of a mixed oil phase of lard and paraffin to change from a solid to a liquid phase. The coated Mg microspheres are subsequently exposed to the acidic gastric acid environment to produce a magnesium protonation reaction, which in turn generates hydrogen (H2) bubble recoil. Through a Mg-based micropower traction, part of the oil phase could be pushed into the gastric perforation, and it would then solidify to seal the gastric perforation area. Experimental results show that this can achieve long-term (>2 h) gastric perforation sealing. This innovative approach holds potential for improving outcomes in gastric perforation management.

Role of Galectin-3 in intervertebral disc degeneration: an experimental study.

BACKGROUND: This study investigated the role of Galectin-3 in the degeneration of intervertebral disc cartilage. METHODS: The patients who underwent lumbar spine surgery due to degenerative disc disease were recruited and divided into Modic I, Modic II, and Modic III; groups. HE staining was used to detect the pathological changes in endplates. The changes of Galectin-3, MMP3, Aggrecan, CCL3, and Col II were detected by immunohistochemistry, RT-PCR, and Western blot. MTT and flow cytometry were used to detect cartilage endplate cell proliferation, cell cycle, and apoptosis. RESULTS: With the progression of degeneration (from Modic I to III), the chondrocytes and density of the cartilage endplate of the intervertebral disc decreased, and the collagen arrangement of the cartilage endplate of the intervertebral disc was broken and calcified. Meanwhile, the expressions of Aggrecan, Col II, Galectin-3, Aggrecan, and CCL3 gradually decreased. After treatment with Galectin-3 inhibitor GB1107, the proliferation of rat cartilage end plate cells was significantly reduced (P < 0.05). GB1107 (25 µmol/L) also significantly promoted the apoptosis of cartilage endplate cells (P < 0.05). Moreover, the percentage of cartilage endplate cells in the G1 phase was significantly higher, while that in the G2 and S phases was significantly lower (P < 0.05). Additionally, the mRNA and protein expression levels of MMP3, CCL3, and Aggrecan in rat cartilage end plate cells were lower than those in the control group. CONCLUSIONS: Galectin-3 decreases with the progression of the cartilage endplate degeneration of the intervertebral disc. Galectin-3 may affect intervertebral disc degeneration by regulating the degradation of the extracellular matrix.

Constructing Efficient CuO-Based CO Oxidation Catalysts with Large Specific Surface Area Mesoporous CeO2 Nanosphere Support.

CeO2 is an outstanding support commonly used for the CuO-based CO oxidation catalysts due to its excellent redox property and oxygen storage-release property. However, the inherently small specific surface area of CeO2 support restricts the further enhancement of its catalytic performance. In this work, the novel mesoporous CeO2 nanosphere with a large specific surface area (~190.4 m2/g) was facilely synthesized by the improved hydrothermal method. The large specific surface area of mesoporous CeO2 nanosphere could be successfully maintained even at high temperatures up to 500 °C, exhibiting excellent thermal stability. Then, a series of CuO-based CO oxidation catalysts were prepared with the mesoporous CeO2 nanosphere as the support. The large surface area of the mesoporous CeO2 nanosphere support could greatly promote the dispersion of CuO active sites. The effects of the CuO loading amount, the calcination temperature, mesostructure, and redox property on the performances of CO oxidation were systematically investigated. It was found that high Cu+ concentration and lattice oxygen content in mesoporous CuO/CeO2 nanosphere catalysts greatly contributed to enhancing the performances of CO oxidation. Therefore, the present mesoporous CeO2 nanosphere with its large specific surface area was considered a promising support for advanced CO oxidation and even other industrial catalysts.

Strategic Structural Control of Polyserotonin Nanoparticles and Their Application as pH-Responsive Nanomotors.

Serotonin-based nanomaterials have been positioned as promising contenders for constructing multifunctional biomedical nanoplatforms due to notable biocompatibility, advantageous charge properties, and chemical adaptability. The elaborately designed structure and morphology are significant for their applications as functional carriers. In this study, we fabricated anisotropic bowl-like mesoporous polyserotonin (PST) nanoparticles with a diameter of approximately 170 nm through nano-emulsion polymerization, employing P123/F127 as a dual-soft template and 1,3,5-trimethylbenzene (TMB) as both pore expander and emulsion template. Their formation can be attributed to the synchronized assembly of P123/F127/TMB, along with the concurrent manifestation of anisotropic nucleation and growth on the TMB emulsion droplet surface. Meanwhile, the morphology of PST nanoparticles can be regulated from sphere- to bowl-like, with a particle size distribution ranging from 432 nm to 100 nm, experiencing a transformation from a dendritic, cylindrical open mesoporous structure to an approximately non-porous structure by altering the reaction parameters. The well-defined mesopores, intrinsic asymmetry, and pH-dependent charge reversal characteristics enable the as-prepared mesoporous bowl-like PST nanoparticles' potential for constructing responsive biomedical nanomotors through incorporating some catalytic functional materials, 3.5 nm CeO2 nanoenzymes, as a demonstration. The constructed nanomotors demonstrate remarkable autonomous movement capabilities under physiological H2O2 concentrations, even at an extremely low concentration of 0.05 mM, showcasing the 51.58 body length/s velocity. Furthermore, they can also respond to physiological pH values ranging from 4.4 to 7.4, exhibiting reduced mobility with increasing pH. This charge reversal-based responsive nanomotor design utilizing PST nanoparticles holds great promise for advancing the application of nanomotors within complex biological systems.

GIMAP5 deficiency reveals a mammalian ceramide-driven longevity assurance pathway.

Preserving cells in a functional, non-senescent state is a major goal for extending human healthspans. Model organisms reveal that longevity and senescence are genetically controlled, but how genes control longevity in different mammalian tissues is unknown. Here, we report a new human genetic disease that causes cell senescence, liver and immune dysfunction, and early mortality that results from deficiency of GIMAP5, an evolutionarily conserved GTPase selectively expressed in lymphocytes and endothelial cells. We show that GIMAP5 restricts the pathological accumulation of long-chain ceramides (CERs), thereby regulating longevity. GIMAP5 controls CER abundance by interacting with protein kinase CK2 (CK2), attenuating its ability to activate CER synthases. Inhibition of CK2 and CER synthase rescues GIMAP5-deficient T cells by preventing CER overaccumulation and cell deterioration. Thus, GIMAP5 controls longevity assurance pathways crucial for immune function and healthspan in mammals.

Ribosomal protein L8 regulates the expression and splicing pattern of genes associated with cancer-related pathways.

Background/aim: Ribosomal proteins have been shown to perform unique extraribosomal functions in cell apoptosis and other biological processes. Ribosomal protein L8 (RPL8) not only has important nonribosomal regulatory functions but also participates in the oncogenesis and development of tumors. However, the specific biological functions and pathways involved in this process are still unknown. Materials and methods: RPL8 was overexpressed (RPL8-OE) in HeLa cells. MTT assay and flow cytometry were used to detect cell proliferation and apoptosis, respectively. Transcriptome sequencing was performed to analyze the differentially expressed genes (DEGs) and regulated alternative splicing events (RASEs) by RPL8-OE, both of which were validated by quantitative reverse transcription polymerase chain reaction (RT-qPCR) assay. Results: RPL8-OE inhibited cell proliferation and promoted cell apoptosis. RPL8 regulated the differential expression of many oncogenic genes and the occurrence of RASEs. Many DEGs and RASE genes (RASGs) were enriched in tumorigenesis and tumor progression-related pathways, including angiogenesis, inflammation, and regulation of cell proliferation. RPL8 could regulate the RASGs enriched in the negative regulation of apoptosis, consistent with its proapoptosis function. Furthermore, RPL8 may influence cancer-related DEGs by modulating the alternative splicing of transcription factors. Conclusion: RPL8 might affect the phenotypes of cancer cells by altering the transcriptome profiles, including gene expression and splicing, which provides novel insights into the biological functions of RPL8 in tumor development.

Broadband ultraviolet plasmonic enhanced AlGaN/GaN heterojunction photodetectors with close-packed Al nanoparticle arrays.

Plasmonic metallic nanostructures could concentrate optical fields into nanoscale volumes and support efficient light scattering and absorption, which therefore stimulates the continuing development of advanced plasmonic-assisted semiconductor photodetectors. In this work, by fabricating Al nanoparticle (NP) arrays in AlGaN surface using the AAO template transferring method, significant broadband ultraviolet (UV) photoresponse enhancement was demonstrated on AlGaN/GaN heterojunction photodetectors. By deliberately designing the close-packed Al NP arrays, the broadband UV plasmonic resonance with large optical field absorption and strong interface field enhancement are enabled, hence, the highest responsivity exceeding 8.1 A W-1 and maximum external quantum efficiency of 3500% was obtained at the resonance wavelength 292 nm, revealing more than 80 times the excellent enhancement in responsivity. Specifically, owing to coupling among NPs at the Al/AlGaN interface, the smaller size Al NP array exhibits an excellent photoresponse enhancement encompassing the entire UV band compared to the relatively larger size Al NP array. In addition, different photoresponse enhancements depending on the applied bias were observed. The Al NPs detector also demonstrates a fast photoresponse with a rise time of around 60 ms and a relatively long fall time of 1.42 s. This work could be of great significance for gaining a low and efficient approach to achieve plasmonic-empowered heterojunction broadband UV detectors.

Oxidation of Toluene over Mesoporous MnO2/CeO2 Nanosphere Catalysts: Effects of the MnO2 Precursor and the Type of Support.

Toluene is the most common volatile organic compound (VOC), and the MnO2-based catalyst is one of the excellent nonprecious metal catalysts for toluene oxidation. In this study, the effects of MnO2 precursors and the support types on the oxidation performance of toluene were systematically explored. The results showed that the 15MnO2/MS-CeO2-N catalyst with Mn(NO3)2·4H2O as the precursor and the mesoporous CeO2 nanosphere (MS-CeO2) as the support exhibited the most excellent performance. To reveal the reason behind this phenomenon, the calcination process of the catalyst precursor and the reaction process of toluene oxidation were investigated by in situ DRIFTS. It was found that the MnO2 precursor and the type of catalyst support could have a large effect on the reaction pathway and the produced intermediates. Therefore, the roles of the MnO2 precursor and the type of support should be key considerations when developing the high-performance MnO2-based toluene oxidation catalyst.

A Genetic Variant of FAM46A is Associated With the Development of Adolescent Idiopathic Scoliosis in the Chinese Population.

STUDY DESIGN: A genetic case-control study. OBJECTIVE: To replicate recently reported genetic loci associated with adolescent idiopathic scoliosis (AIS) in the Chinese Han population, and to determine the relationship between gene expression and the clinical features of the patients. SUMMARY OF BACKGROUND DATA: A recent study conducted in the Japanese population identified several novel susceptible loci, which might provide new insights into the etiology of AIS. However, the association of these genes with AIS in other populations remains unclear. MATERIALS AND METHODS: A total of 1210 AIS and 2500 healthy controls were recruited for the genotyping of 12 susceptibility loci. Paraspinal muscles used for gene expression analysis were obtained from 36 AIS and 36 patients with congenital scoliosis. The difference regarding genotype and allele frequency between patients and controls was analyzed by χ 2 analysis. The t test was performed to compare the target gene expression level between controls and AIS patients. Correlation analysis was performed between gene expression and phenotypic data, including Cobb angle, bone mineral density, lean mass, height, and body mass index. RESULTS: Four SNPs, including rs141903557, rs2467146, rs658839, and rs482012, were successfully validated. Allele C of rs141903557, allele A of rs2467146, allele G of rs658839, and allele T of single nucleotide polymorphism rs482012 showed significantly higher frequency in patients. Allele C of rs141903557, allele A of rs2467146, allele G of rs658839, and allele T of rs482012 could notably increase the risk of AIS patients, with an odds ratio of 1.49, 1.16, 1.11, and 1.25, respectively. Moreover, tissue expression of FAM46A was significantly lower in AIS patients as compared with controls. Moreover, FAM46A expression was remarkably correlated with bone mineral density of patients. CONCLUSION: Four SNPs were successfully validated as novel susceptibility loci associated with AIS in the Chinese population. Moreover, FAM46A expression was associated with the phenotype of AIS patients.

More Prevalent and Severe Low Bone-Mineral Density in Boys with Severe Adolescent Idiopathic Scoliosis Than Girls: A Retrospective Study of 798 Surgical Patients.

INTRODUCTION: A total of 0.1-0.8% of AIS patients progress to severe stages without clear mechanisms, and AIS girls are more prone to curve progression than boys. Recent studies suggest that AIS girls have systemic and persistent low bone-mineral density (BMD), which has been shown to be a significant prognostic factor of curve progression in AIS. The present study aimed to (a) investigate the prevalence of low BMD in patients with severe AIS and (b) assess the sexual dimorphism and independent risk factors of low BMD in severe AIS patients. MATERIALS AND METHODS: A total of 798 patients (140 boys vs. 658 girls) with AIS who reached surgical threshold (Cobb ≥ 40°) were recruited. BMD were assessed using BMD Z-scores from dual-energy X-ray absorptiometry (DXA). Demographic, clinical, and laboratory values of the subjects were collected from their medical records. Logistic regression analysis was performed to identify independent risk factors of low BMD. RESULTS: The overall prevalence of BMD Z-score ≤ -2 and ≤ -1 were 8.1% and 37.5%, respectively. AIS boys had significantly lower BMD Z-scores (-1.2 ± 0.96 vs. -0.57 ± 0.92) and higher prevalence of low BMD (Z-score ≤ -2: 22.1% vs. 5.2%, p < 0.001; Z-score ≤ -1: 59.3% vs. 32.8%, p < 0.001) than girls. Sex, BMI, serum alkaline phosphatase, and potassium were independent factors of low BMD in the severe AIS patients. CONCLUSIONS: The present large cohort of surgical AIS patients revealed that low BMD is more prevalent and severe in boys than in girls with severe curves. Low BMD may serve as a more valuable predictive factor for curve progression to the surgical threshold in boys than girls with AIS.

Ependymal polarity defects coupled with disorganized ciliary beating drive abnormal cerebrospinal fluid flow and spine curvature in zebrafish.

Idiopathic scoliosis (IS) is the most common spinal deformity diagnosed in childhood or early adolescence, while the underlying pathogenesis of this serious condition remains largely unknown. Here, we report zebrafish ccdc57 mutants exhibiting scoliosis during late development, similar to that observed in human adolescent idiopathic scoliosis (AIS). Zebrafish ccdc57 mutants developed hydrocephalus due to cerebrospinal fluid (CSF) flow defects caused by uncoordinated cilia beating in ependymal cells. Mechanistically, Ccdc57 localizes to ciliary basal bodies and controls the planar polarity of ependymal cells through regulating the organization of microtubule networks and proper positioning of basal bodies. Interestingly, ependymal cell polarity defects were first observed in ccdc57 mutants at approximately 17 days postfertilization, the same time when scoliosis became apparent and prior to multiciliated ependymal cell maturation. We further showed that mutant spinal cord exhibited altered expression pattern of the Urotensin neuropeptides, in consistent with the curvature of the spine. Strikingly, human IS patients also displayed abnormal Urotensin signaling in paraspinal muscles. Altogether, our data suggest that ependymal polarity defects are one of the earliest sign of scoliosis in zebrafish and disclose the essential and conserved roles of Urotensin signaling during scoliosis progression.

Minor Forms of Parental Maltreatment and Educational Achievement of Immigrant Youths in Young Adulthood: A Longitudinal Study.

Parental hostility and emotional rejection-or aggregated as general harsh family interactions with parents-have received little research attention due to such parent-child interactions being counted as minor forms of parental maltreatment and regarded as being less harmful. However, recent research showed that these minor forms of parental maltreatment on youth development are far from negligibility on account of their frequency, chronicity, and incessancy. In this longitudinal study, we investigated how parental hostility, emotional rejection, and harsh family interactions with parents of in early adolescence of immigrant youths (wave-1 Mage = 14) adversely impact successful college graduation of immigrant youths in young adulthood (wave-3 Mage = 24) through the mediation of their development of academic aspirations in late adolescence (wave-2 Mage = 17). Using data from a representative sample of the Children of Immigrants Longitudinal Study (N = 3344), the current study revealed that parental hostility, emotional rejection, and harsh family interactions with parents significantly impaired successful college graduation of immigrant youths in young adulthood, with the decreased odds of 20.1% to 30.22%. Furthermore, academic aspirations of immigrant youths in late adolescence not only significantly mediated the abovementioned relationships but also contributed to the higher odds of immigrant youths' college graduation by 2.226 to 2.257 times. Findings of this study related to educational innovations, family services, and policy implications are discussed herein.

Designing Highly Efficient Cu2O-CuO Heterojunction CO Oxidation Catalysts: The Roles of the Support Type and Cu2O-CuO Interface Effect.

In this work, a series of Cu2O/S (S = α-MnO2, CeO2, ZSM-5, and Fe2O3) supported catalysts with a Cu2O loading amount of 15% were prepared by the facile liquid-phase reduction deposition-precipitation strategy and investigated as CO oxidation catalysts. It was found that the Cu2O/α-MnO2 catalyst exhibits the best catalytic activity for CO oxidation. Additionally, a series of Cu2O-CuO/α-MnO2 heterojunctions with varied proportion of Cu+/Cu2+ were synthesized by further calcining the pristine Cu2O/α-MnO2 catalyst. The ratio of the Cu+/Cu2+ could be facilely regulated by controlling the calcination temperature. It is worth noting that the Cu2O-CuO/α-MnO2-260 catalyst displays the best catalytic performance. Moreover, the kinetic studies manifest that the apparent activation energy could be greatly reduced owing to the excellent redox property and the Cu2O-CuO interface effect. Therefore, the Cu2O-CuO heterojunction catalysts supported on α-MnO2 nanotubes are believed to be the potential catalyst candidates for CO oxidation with advanced performance.

Self-Adaptive Flask-like Nanomotors Based on Fe3O4 Nanoparticles to a Physiological pH.

In living bodies, pH values, which are precisely regulated and closely associated with diseased cells, can act as an efficient biologically intrinsic indicator for future intelligent biomedicine microsystems. In this work, we have developed flask-like carbonaceous nanomotors (FCNMs), via loading Fe3O4 nanoparticles (NPs) into a cavity, which exhibit a self-adaptive feature to a specific physiological pH by virtue of the pH-dependent dual enzyme-like activities of Fe3O4 NPs. Specifically, the peroxidase-like activity of Fe3O4 NPs in an acidic pH range, and the catalase-like activity in a near neutral and alkaline pH range, determine the products in the motion system (•OH, ions and O2), whose diffusions from the inner to the outside of the flask result in fluid movement providing the driving force for the movement of the FCNMs. Correspondingly, changes of the product concentrations and species in the physiological pH range (4.4-7.4) result, firstly, in velocity decrease and, then, with increase in pH, increase of the FCNMs occurs. Thanks to the non-linear velocity responsiveness, the FCNMs show intriguing pH taxis towards 6.8 (generally corresponding to the physiological pH in tumor microenvironments), where a maximum velocity appears. Furthermore, the superparamagnetic feature of the Fe3O4 NPs simultaneously endows the FCNMs with the abilities to be magnetic-oriented and easily separated. This work could significantly increase the possibility of nanomotors for targeted therapy of tumors and next-generation biotechnological applications.

Enhancing the Low-Temperature CO Oxidation over CuO-Based α-MnO2 Nanowire Catalysts.

A series of CuO-based catalysts supported on the α-MnO2 nanowire were facilely synthesized and employed as the CO oxidation catalysts. The achieved catalysts were systematically characterized by XRD, SEM, EDS-mapping, XPS and H2-TPR. The catalytic performances toward CO oxidation had been carefully evaluated over these CuO-based catalysts. The effects of different loading methods, calcination temperatures and CuO loading on the low temperature catalytic activity of the catalyst were investigated and compared with the traditional commercial MnO2 catalyst with a block structure. It was found that the slenderness ratio of a CuO/α-MnO2 nanowire catalyst decreases with the increase in CuO loading capacity. The results showed that when CuO loading was 3 wt%, calcination temperature was 200 °C and the catalyst that was supported by the deposition precipitation method had the highest catalytic activity. Besides, the α-MnO2 nanowire-supported catalysts with excellent redox properties displayed much better catalytic performances than the commercial MnO2-supported catalyst. In conclusion, the CuO-based catalysts that are supported by α-MnO2 nanowires are considered as a series of promising CO oxidation catalysts.

Identification of a novel splicing mutation and genotype-phenotype correlations in rare PLS3-related childhood-onset osteoporosis.

BACKGROUND: X-linked early-onset osteoporosis, caused by mutations in plastin3 (PLS3), is an extremely rare disease characterized by low bone mineral density (BMD) and recurrent osteoporotic fractures. There is limited information on genetic and phenotypic spectrum, as well as genotype-phenotype correlations of the disease. Moreover, whether decreased PLS3 levels were also involved in osteoporosis among subjects without PLS3 pathogenic mutations remains unknown. METHODS: Whole-exome sequencing and bidirectional Sanger sequencing were performed for screening and validation of pathogenic mutations. Serum biochemical parameters and clinical information of the subjects were retrospectively collected. ELISA and online datasets were utilized to investigate the association between PLS3 expression and BMD. RESULTS: We identified a novel splicing mutation (c.892-2A > G) which led to the skipping of exon 9 in a family with X-linked early-onset osteoporosis. Scoliosis represents a potential new phenotype in the patients harboring PLS3 mutations, which may be corrected by brace treatment. Genotype-phenotype analysis reveals that there was no significant difference in BMD z-scores between different types of reported mutations including this study (p = 0.5). There is a marginally significant negative correlation between age and BMD z-score (p = 0.059, r = - 0.30). The conditions of osteoporosis in all patients were improved after bisphosphonates therapy, with mean BMD z-score increased from - 2.9 to - 0.57 (p < 0.0001). Serum PLS3 levels in adolescents and adults without PLS3 pathogenic mutations but representing osteoporosis were also evaluated, while no association was found between bone mineral density and PLS3 levels (p > 0.05). CONCLUSIONS: Our findings expanded the mutation and phenotype spectrum of the rare disease and highlights the importance of early diagnosis and early treatment with bisphosphonates. More reports of cases with PLS3 mutation and function studies of the gene are warranted to understand genotype-phenotype correlations.

One-Step Route to Fe2O3 and FeSe2 Nanoparticles Loaded on Carbon-Sheet for Lithium Storage.

Iron-based anode materials, such as Fe2O3 and FeSe2 have attracted widespread attention for lithium-ion batteries due to their high capacities. However, the capacity decays seriously because of poor conductivity and severe volume expansion. Designing nanostructures combined with carbon are effective means to improve cycling stability. In this work, ultra-small Fe2O3 nanoparticles loaded on a carbon framework were synthesized through a one-step thermal decomposition of the commercial C15H21FeO6 [Iron (III) acetylacetonate], which could be served as the source of Fe, O, and C. As an anode material, the Fe2O3@C anode delivers a specific capacity of 747.8 mAh g-1 after 200 cycles at 200 mA g-1 and 577.8 mAh g-1 after 365 cycles at 500 mA g-1. When selenium powder was introduced into the reaction system, the FeSe2 nano-rods encapsulated in the carbon shell were obtained, which also displayed a relatively good performance in lithium storage capacity (852 mAh g-1 after 150 cycles under the current density of 100 mA·g-1). This study may provide an alternative way to prepare other carbon-composited metal compounds, such as FeNx@C, FePx@C, and FeSx@C, and found their applications in the field of electrochemistry.

Experimental and theoretical study of ZrMo-KIT-6 solid acid catalyst with abundant Brønsted acid sites.

Given their excellent reusability and environmental friendliness, solid acid catalysts have drawn considerable attention in acid-catalyzed reactions. However, the rational design and synthesis of solid acid catalysts with abundant Brønsted acid sites remains a challenge. In this paper, KIT-6, Zr-KIT-6, Mo-KIT-6, and ZrMo-KIT-6 solid acid catalysts are designed and synthesized. The textural properties, chemical bonds, and acidic properties of these catalysts are explored. Theoretical calculations are conducted to explore the formation mechanism of Brønsted acid sites. The theoretical trend of acidity is consistent with the experimental result of acidity and further demonstrates that the synergistic effect of Zr and Mo species improves the formation of Brønsted acid sites. The as-obtained ZrMo-KIT-6 solid acid catalysts are employed in Friedel-Crafts benzylation reaction, and the outstanding catalytic performance of the ZrMo-KIT-6 catalyst indicates that it is an excellent Brønsted solid acid catalyst.