Phytic Acid-Promoted Deposition of Gold Nanoparticles with Grafted Cationic Polymer Brushes for the Construction of Synergistic Contact-Killing and Photothermal Bactericidal Coatings.

Medical implants are constantly facing the risk of bacterial infections, especially infections caused by multidrug resistant bacteria. To mitigate this problem, gold nanoparticles with alkyl bromide moieties (Au NPs-Br) on the surfaces were prepared. Xenon light irradiation triggered the plasmon effect of Au NPs-Br to induce free radical graft polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA), leading to the formation of poly(DMAEMA) brush-grafted Au NPs (Au NPs-g-PDM). The Au NPs-g-PDM nanocomposites were conjugated with phytic acid (PA) via electrostatic interaction and van der Waals interaction. The as-formed aggregates were deposited on the titanium (Ti) substrates to form the PA/Au NPs-g-PDM (PAP) hybrid coatings through surface adherence of PA and the gravitational effect. Synergistic bactericidal effects of contact-killing caused by the cationic PDM brushes, and local heating generated by the Au NPs under near-infrared irradiation, conferred strong antibacterial effects on the PAP-deposited Ti (Ti-PAP) substrates. The synergistic bactericidal effects reduced the threshold temperature required for the photothermal sterilization, which in turn minimized the secondary damage to the implant site. The Ti-PAP substrates exhibited 97.34% and 99.97% antibacterial and antiadhesive efficacy, respectively, against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), compared to the control under in vitro antimicrobial assays. Furthermore, the as-constructed Ti-PAP surface exhibited a 99.42% reduction in the inoculated S. aureus under in vivo assays. In addition, the PAP coatings exhibited good biocompatibility in the hemolysis and cytotoxicity assays as well as in the subcutaneous implantation of rats.

Tailoring Efficient Fluorogenic Tactic for Ultrasensitive Detection of Dopamine in Urine and Rat Brain through Real-Time and In Situ Formation of High-Performance Fluorophore.

Owing to the predominance of dopamine (DA) in controlling mental health, planning an innovative method for DA detection with simplicity and high efficacy is conducive to the assessment of neurological disorders. Herein, an efficient fluorogenic tactic has been elaborated for ultrasensitive detection of DA with remarkably enhanced turn-on response. Utilizing a twisted intramolecular charge-transfer (TICT)-suppressing strategy, a highly emissive azocine derivative 11-hydroxy-2,3,6,7,11,12,13,14-octahydro-1H,5H,10H-11,14a-methanoazocino[5',4':4,5]furo[2,3-f]pyrido[3,2,1-ij]quinolin-10-one (J-Aza) is generated via a one-step reaction between DA and 8-hydroxyjulolidine. It is marvelous that J-Aza not only possesses ideal fluorescence quantum yield (ΦF) as high as 0.956 but also exhibits bathochromic shifted fluorescence (green emissive) and stronger anti-photobleaching capacity superior to traditional azocine-derived 1,2,3,4-tetrahydro-5H-4,11a-methanobenzofuro[2,3-d]azocin-5-one (Aza) with moderate ΦF, blue fluorescence, and poor photostability. By confining the TICT process, the detection limit to DA can be reduced to 80 pM, which is competitive in contrast to previously reported fluorescence methods. Encouraged by the instant response (within 90 s), wide linear range (0.1-500 nM), great selectivity, and excellent sensitivity, this fluorogenic method has been used for the real-time measurement of DA contents in practical urine samples with satisfactory results. Furthermore, the cerebral DA level in the reserpine-induced depression rat model has also been evaluated by our designed method, demonstrating its potent analytical applicability in the biosensing field.

Designing Interoperable Health Care Services Based on Fast Healthcare Interoperability Resources: Literature Review.

BACKGROUND: With the advent of the digital economy and the aging population, the demand for diversified health care services and innovative care delivery models has been overwhelming. This trend has accelerated the urgency to implement effective and efficient data exchange and service interoperability, which underpins coordinated care services among tiered health care institutions, improves the quality of oversight of regulators, and provides vast and comprehensive data collection to support clinical medicine and health economics research, thus improving the overall service quality and patient satisfaction. To meet this demand and facilitate the interoperability of IT systems of stakeholders, after years of preparation, Health Level 7 formally introduced, in 2014, the Fast Healthcare Interoperability Resources (FHIR) standard. It has since continued to evolve. FHIR depends on the Implementation Guide (IG) to ensure feasibility and consistency while developing an interoperable health care service. The IG defines rules with associated documentation on how FHIR resources are used to tackle a particular problem. However, a gap remains between IGs and the process of building actual services because IGs are rules without specifying concrete methods, procedures, or tools. Thus, stakeholders may feel it nontrivial to participate in the ecosystem, giving rise to the need for a more actionable practice guideline (PG) for promoting FHIR's fast adoption. OBJECTIVE: This study aimed to propose a general FHIR PG to facilitate stakeholders in the health care ecosystem to understand FHIR and quickly develop interoperable health care services. METHODS: We selected a collection of FHIR-related papers about the latest studies or use cases on designing and building FHIR-based interoperable health care services and tagged each use case as belonging to 1 of the 3 dominant innovation feature groups that are also associated with practice stages, that is, data standardization, data management, and data integration. Next, we reviewed each group's detailed process and key techniques to build respective care services and collate a complete FHIR PG. Finally, as an example, we arbitrarily selected a use case outside the scope of the reviewed papers and mapped it back to the FHIR PG to demonstrate the effectiveness and generalizability of the PG. RESULTS: The FHIR PG includes 2 core elements: one is a practice design that defines the responsibilities of stakeholders and outlines the complete procedure from data to services, and the other is a development architecture for practice design, which lists the available tools for each practice step and provides direct and actionable recommendations. CONCLUSIONS: The FHIR PG can bridge the gap between IGs and the process of building actual services by proposing actionable methods, procedures, and tools. It assists stakeholders in identifying participants' roles, managing the scope of responsibilities, and developing relevant modules, thus helping promote FHIR-based interoperable health care services.

Portable nanopore-sequencing technology: Trends in development and applications.

Sequencing technology is the most commonly used technology in molecular biology research and an essential pillar for the development and applications of molecular biology. Since 1977, when the first generation of sequencing technology opened the door to interpreting the genetic code, sequencing technology has been developing for three generations. It has applications in all aspects of life and scientific research, such as disease diagnosis, drug target discovery, pathological research, species protection, and SARS-CoV-2 detection. However, the first- and second-generation sequencing technology relied on fluorescence detection systems and DNA polymerization enzyme systems, which increased the cost of sequencing technology and limited its scope of applications. The third-generation sequencing technology performs PCR-free and single-molecule sequencing, but it still depends on the fluorescence detection device. To break through these limitations, researchers have made arduous efforts to develop a new advanced portable sequencing technology represented by nanopore sequencing. Nanopore technology has the advantages of small size and convenient portability, independent of biochemical reagents, and direct reading using physical methods. This paper reviews the research and development process of nanopore sequencing technology (NST) from the laboratory to commercially viable tools; discusses the main types of nanopore sequencing technologies and their various applications in solving a wide range of real-world problems. In addition, the paper collates the analysis tools necessary for performing different processing tasks in nanopore sequencing. Finally, we highlight the challenges of NST and its future research and application directions.

CASQ1-related myopathy: The first report from China and the literature review.

Calsequestrin 1 (CASQ1) is the most crucial Ca2+ binding protein localized in the sarcoplasmic reticulum (SR) of skeletal muscle. With high capacity and low affinity for Ca2+, CASQ1 plays a significant role in maintaining a large amount of Ca2+ necessary for muscle contraction. However, only five mutations in CASQ1 have been identified to date. Here, we report a 42-year-old Chinese female patient who presented with a 12 years history of slowly progressive upper limb weakness, predominantly affecting distal muscles, which was uncommon comparing to other CASQ1-related patients. Next-generation sequencing (NGS) analysis revealed a novel heterozygous mutation (c.766G > A, p.Val256Met) in CASQ1. Functional studies confirmed the likely pathogenicity of this variant. Muscle histopathology revealed rare optically empty vacuoles in myofibers and atypical eosinophilic granules in the cytoplasm, which has not been observed before. We also performed a literature review on all the pathogenic mutations in CASQ1 and summarized their genetic and clinical characteristics. This is the first report on CASQ1-related myopathy from China, further expanding the mutation spectrum of CASQ1 gene and provides new insights into the function of CASQ1.

AutoNanopore: An Automated Adaptive and Robust Method to Locate Translocation Events in Solid-State Nanopore Current Traces.

Solid-state nanopore sequencing has shown impressive performances in several research scenarios but is still challenging, mainly due to the ultrafast speed of DNA translocation and significant noises embedded in raw signals. Hence, event detection, aiming to locate precisely these translocation events, is the fundamental step of data analysis. However, existing event detection methods use either a user-defined global threshold or an adaptive threshold determined by the data, assuming the baseline current to be stable over time. These disadvantages limit their applications in real-world application scenarios, especially considering that the results of different methods are often inconsistent. In this study, we develop an automated adaptive method called AutoNanopore, for fast and accurate event detection in current traces. The method consists of three consecutive steps: current trace segmentation, current amplitude outlier identification by straightforward statistical analyses, and event characterization. Then we propose ideas/metrics on how to quantitatively evaluate the performance of an event detection method, followed by comparing the performance of AutoNanopore against two state-of-the-art methods, OpenNanopore and EventPro. Finally, we examine if one method can detect the overlapping events detected by the other two, demonstrating that AutoNanopore has the highest coverage ratio. Moreover, AutoNanopore also performs well in detecting challenging events: e.g., those with significantly varying baselines.

Exploring the Change of Host and Microorganism in Chronic Obstructive Pulmonary Disease Patients Based on Metagenomic and Metatranscriptomic Sequencing.

Background: Chronic obstructive pulmonary disease (COPD) is a universal respiratory disease resulting from the complex interactions between genes and environmental conditions. The process of COPD is deteriorated by repeated episodes of exacerbations, which are the primary reason for COPD-related morbidity and mortality. Bacterial pathogens are commonly identified in patients' respiratory tracts both in the stable state and during acute exacerbations, with significant changes in the prevalence of airway bacteria occurring during acute exacerbation of chronic obstructive pulmonary disease (AECOPD). Therefore, the changes in microbial composition and host inflammatory responses will be necessary to investigate the mechanistic link between the airway microbiome and chronic pulmonary inflammation in COPD patients. Methods: We performed metatranscriptomic and metagenomic sequencing on sputum samples for twelve AECOPD patients before treatment and for four of them stable COPD (stabilization of AECOPD patients after treatment). Sequencing reads were classified by Kraken2, and the host gene expression was analyzed by Hisat2 and HTseq. The correlation between genes was obtained by the Spearman correlation coefficient. Mann-Whitney U-test was applied to identify microbes that exhibit significantly different distribution in two groups. Results: At the phyla level, the top 5 dominant phyla were Firmicutes, Actinobacteria, Proteobacteria, Bacteroidetes, and Fusobacteria. The proportion of dominant gates in metagenomic data was similar in metatranscriptomic data. There were significant differences in the abundance of specific microorganisms at the class level between the two methods. No significant difference between AECOPD and stable COPD was found. However, the different expression levels of 5 host genes were significantly increased in stable COPD and were involved in immune response and inflammatory pathways, which were associated with macrophages. Conclusion: Our study may provide a clue to investigate the mechanism of COPD and potential biomarkers in clinical diagnosis and treatment.

Effectiveness of a Multifaceted Intervention for Prevention of Obesity in Primary School Children in China: A Cluster Randomized Clinical Trial.

Importance: A rapid nutritional transition has caused greater childhood obesity prevalence in many countries, but the repertoire of effective preventive interventions remains limited. Objective: To determine the effectiveness of a novel multifaceted intervention for obesity prevention in primary school children. Design, Setting, and Participants: A cluster randomized clinical trial was conducted during a single school year (from September 11, 2018, to June 30, 2019) across 3 socioeconomically distinct regions in China according to a prespecified trial protocol. Twenty-four schools were randomly allocated (1:1) to the intervention or the control group, with 1392 eligible children aged 8 to 10 years participating. Data from the intent-to-treat population were analyzed from October 1 to December 31, 2019. Interventions: A multifaceted intervention targeted both children (promoting healthy diet and physical activity) and their environment (engaging schools and families to support children's behavioral changes). The intervention was novel in its strengthening of family involvement with the assistance of a smartphone app. The control schools engaged in their usual practices. Main Outcomes and Measures: The primary outcome was the change in body mass index (BMI; calculated as weight in kilograms divided by height in square meters) from baseline to the end of the trial. Secondary outcomes included changes in adiposity outcomes (eg, BMI z score, prevalence of obesity), blood pressure, physical activity and dietary behaviors, obesity-related knowledge, and physical fitness. Generalized linear mixed models were used in the analyses. Results: Among the 1392 participants (mean [SD] age, 9.6 [0.4] years; 717 boys [51.5%]; mean [SD] BMI, 18.6 [3.7]), 1362 (97.8%) with follow-up data were included in the analyses. From baseline to the end of the trial, the mean BMI decreased in the intervention group, whereas it increased in the control group; the mean between-group difference in BMI change was -0.46 (95% CI, -0.67 to -0.25; P < .001), which showed no evidence of difference across different regions, sexes, maternal education levels, and primary caregivers (parents vs nonparents). The prevalence of obesity decreased by 27.0% of the baseline figure (a relative decrease) in the intervention group, compared with 5.6% in the control group. The intervention also improved other adiposity outcomes, dietary, sedentary, and physical activity behaviors, and obesity-related knowledge, but it did not change moderate- to vigorous-intensity physical activity, physical fitness, or blood pressure. No adverse events were observed during the intervention. Conclusions and Relevance: The multifaceted intervention effectively reduced the mean BMI and obesity prevalence in primary school children across socioeconomically distinct regions in China, suggesting its potential for national scaling. Trial Registration: ClinicalTrials.gov Identifier: NCT03665857.

LDMD: A database of microbes in human lung disease.

Background: Lungs were initially thought to be sterile. However, with the development of sequencing technologies, various commensal microorganisms, especially bacteria, have been observed in the lungs of healthy humans. Several studies have also linked lung microbes to infectious lung diseases. However, few databases have focused on the metagenomics of lungs to provide microbial compositions and corresponding metadata information. Such a database would be handy for researching and treating lung diseases. Methods: To provide researchers with a preliminary understanding of lung microbes and their research methods, the LDMD collated nearly 10,000 studies in the literature covering over 30 diseases, gathered basic information such as the sources of lung microbe samples, sequencing methods, and processing software, as well as analyzed the metagenomic sequencing characteristics of lung microbes. Besides, the LDMD also contained data collected in our laboratory. Results: In this study, we established the Lung Disease Microorganisms Database (LDMD), a comprehensive database of microbes involved in lung disease. The LDMD offered sequence analysis capabilities, allowing users to upload their sequencing results, align them with the data collated in the database, and visually analyze the results. Conclusion: In conclusion, the LDMD possesses various functionalities that provide a convenient and comprehensive resource to study the lung metagenome and treat lung diseases.

Multifunctional SGQDs-CORM@HA nanosheets for bacterial eradication through cascade-activated "nanoknife" effect and photodynamic/CO gas therapy.

Infection associated with multidrug-resistant (MDR) bacteria has become a serious threat to public health, and there is an urgent demand of developing new antibiotics that offer combinatorial therapy to effectively combat MDR. Herein, a multifunctional two-dimensional nanoantibiotic was facilely designed and established on the basis of the covalent conjugation of CO-releasing molecule (CORM-401) and electrostatic adsorption of hyaluronic acid (HA) onto single-layered graphene quantum dots (SGQDs) to assemble SGQDs-CORM@HA nanosheets, abbreviated as SCH. Upon the enrichment of as-prepared nanoantibiotics in the community of targeted microbe, bacterial-secreted hyaluronidase (HAase) would cleave HA on SCH, and the sharp edges as well as the reactive sites on SGQDs-CORM nanosheets were exposed for cascade activation of synergistic antibacterial effects. Specifically, ultrathin SGQDs-CORM nanosheets can penetrate into bacterial cells deemed as the unique "nanoknife" effect. Under white light irradiation, SGQDs-CORM nanosheets can act as a high-efficient photosensitizer to generate cytotoxic singlet oxygen (1O2), as a well-recognized reactive oxygen species (ROS), to produce high oxidative stress and damage bacteria. As a complementary to photodynamic therapy (PDT), the accumulation of local ROS further triggered the release of CO to hinder the bacterial growth via causing plasma membrane damage and inducing metabolic disorders. Such synergistic treatment regimen arising from cascade-activated "nanoknife" effect and photodynamic/CO gas therapy, was devoted to outstanding on-demand antibacterial performance both in vitro and in vivo. Fascinatingly, the nanoplatform showed good biocompatibility toward both normal somatic cells and non-targeted bacteria. The remarkable antibacterial capability and admirable biocompatibility endow SCH with great potential to fight against MDR pathogens for in-coming clinical translations.

Mussel Adhesive Mimetic Silk Sericin Prepared by Enzymatic Oxidation for the Construction of Antibacterial Coatings.

With the rapid development and advancement in orthodontic and orthopedic technologies, the demand for biomedical-grade titanium (Ti) alloys is growing. The Ti-based implants are susceptible to bacterial infections, leading to poor healing and osteointegration, resulting in implant failure or repeated surgical intervention. Silk sericin (SS) is hydrophilic, biocompatible, and biodegradable and could induce a low immunological response in vivo. As a result, it would be intriguing to investigate the use of hydrophilic SS in surface modification. In this work, the tyrosine moiety in SS was oxidized by tyrosinase (or polyphenol oxidase) to the 3,4-dihydroxyphenylalanine (DOPA) form, generating the catechol moiety-containing SS (SSC). Inspired by the adhesion of mussel foot proteins, the SSC coatings could be directly deposited onto multiple surfaces in SS and tyrosinase mixed stock solutions to create active surfaces with catechol groups. Further, the SSC-coated Ti surfaces were hybridized with silver nanoparticles (Ag NPs) via in situ silver ion (Ag+) reduction. The antibacterial properties of the Ag NPs/SS-coated Ti surfaces are demonstrated, and they can prevent bacterial cell adhesion as well as early-stage biofilm formation. In addition, the developed Ag NPs/SSC-coated Ti surfaces exhibited a negligible level of cytotoxicity in L929 mouse fibroblast cells.

Effectiveness of a primary care-based integrated mobile health intervention for stroke management in rural China (SINEMA): A cluster-randomized controlled trial.

BACKGROUND: Managing noncommunicable diseases through primary healthcare has been identified as the key strategy to achieve universal health coverage but is challenging in most low- and middle-income countries. Stroke is the leading cause of death and disability in rural China. This study aims to determine whether a primary care-based integrated mobile health intervention (SINEMA intervention) could improve stroke management in rural China. METHODS AND FINDINGS: Based on extensive barrier analyses, contextual research, and feasibility studies, we conducted a community-based, two-arm cluster-randomized controlled trial with blinded outcome assessment in Hebei Province, rural Northern China including 1,299 stroke patients (mean age: 65.7 [SD:8.2], 42.6% females, 71.2% received education below primary school) recruited from 50 villages between June 23 and July 21, 2017. Villages were randomly assigned (1:1) to either the intervention or control arm (usual care). In the intervention arm, village doctors who were government-sponsored primary healthcare providers received training, conducted monthly follow-up visits supported by an Android-based mobile application, and received performance-based payments. Participants received monthly doctor visits and automatically dispatched daily voice messages. The primary outcome was the 12-month change in systolic blood pressure (BP). Secondary outcomes were predefined, including diastolic BP, health-related quality of life, physical activity level, self-reported medication adherence (antiplatelet, statin, and antihypertensive), and performance in "timed up and go" test. Analyses were conducted in the intention-to-treat framework at the individual level with clusters and stratified design accounted for by following the prepublished statistical analysis plan. All villages completed the 12-month follow-up, and 611 (intervention) and 615 (control) patients were successfully followed (3.4% lost to follow-up among survivors). The program was implemented with high fidelity, and the annual program delivery cost per capita was US$24.3. There was a significant reduction in systolic BP in the intervention as compared with the control group with an adjusted mean difference: -2.8 mm Hg (95% CI -4.8, -0.9; p = 0.005). The intervention was significantly associated with improvements in 6 out of 7 secondary outcomes in diastolic BP reduction (p < 0.001), health-related quality of life (p = 0.008), physical activity level (p < 0.001), adherence in statin (p = 0.003) and antihypertensive medicines (p = 0.039), and performance in "timed up and go" test (p = 0.022). We observed reductions in all exploratory outcomes, including stroke recurrence (4.4% versus 9.3%; risk ratio [RR] = 0.46, 95% CI 0.32, 0.66; risk difference [RD] = 4.9 percentage points [pp]), hospitalization (4.4% versus 9.3%; RR = 0.45, 95% CI 0.32, 0.62; RD = 4.9 pp), disability (20.9% versus 30.2%; RR = 0.65, 95% CI 0.53, 0.79; RD = 9.3 pp), and death (1.8% versus 3.1%; RR = 0.52, 95% CI 0.28, 0.96; RD = 1.3 pp). Limitations include the relatively short study duration of only 1 year and the generalizability of our findings beyond the study setting. CONCLUSIONS: In this study, a primary care-based mobile health intervention integrating provider-centered and patient-facing technology was effective in reducing BP and improving stroke secondary prevention in a resource-limited rural setting in China. TRIAL REGISTRATION: ClinicalTrials.gov NCT03185858.

Simultaneous deposition of tannic acid and poly(ethylene glycol) to construct the antifouling polymeric coating on Titanium surface.

Titanium (Ti) and its alloys are primarily explored to produce biomedical implants owing to their improved mechanical stability, corrosion resistance, low density, and good biocompatibility. Despite, Ti substrate surfaces are easily contaminated by plasma proteins and bacteria. Herein, a simple one-step process for the simultaneous deposition of a polyphenol tannic acid (TA) and four-armed poly(ethylene glycol) (PEG10k-4-OH) on the Ti substrate (Ti-TA/PEG) surface was described. Additionally, a two-step process has been employed to fabricate the Ti-TA-PEG surface via successive deposition of TA and PEG10k-4-OH for comparison. The resultant Ti-TA/PEG surface prepared by simultaneous deposition of TA and PEG10k-4-OH exhibits higher coating thickness and better surface coverage than the Ti-TA-PEG surface. The Ti-TA/PEG and Ti-TA-PEG surfaces could actively inhibit the non-specific adsorption of proteins, suppress the bacterial and platelet adhesion, and prevents biofilm formation. Moreover, the Ti-TA/PEG surface displays a better antifouling performance than the Ti-TA-PEG surface. Thus, the present study demonstrates a simple and convenient approach for constructing polymeric coating with good anti-adhesive properties on the Ti substrate surface.

Intradermal administration of green synthesized nanosilver (NS) through film-coated PEGDA microneedles for potential antibacterial applications.

Skin infections caused by pathogens, including bacteria, fungi and viruses, are difficult to completely eliminate through standard topical administration, owing to the restricted drug permeation into the epidermis layer. Herein, we developed a poly(ethylene glycol) diacrylate (PEGDA) microneedle patch with surface coating of a nanosilver (NS) encapsulated gelatin/sucrose film for antibacterial applications, by virtue of enhanced skin permeation by microneedle penetration and efficient drug delivery through rapid film dissolving. NS was facilely synthesized through a green process based on the bioinspired crystallization of ionic state silver in the presence of a silk fibroin (SF) template. A gelatin/sucrose polymeric film encapsulating NS was dressed on the surface of the mold cavity, and film-coated PEGDA (PEGDA/film-NS) microneedles were subsequently fabricated through standard ultraviolet (UV) light-induced polymerization. To demonstrate their advantages for therapeutic applications, the physicochemical properties of the as-developed microneedles were characterized in terms of their morphology, composition, mechanical strength, etc. Moreover, rapid NS release from PEGDA@film-NS microneedles driven by the aqueous environment was demonstrated under physiological conditions. Additionally, such film-coated microneedles exhibited good mechanical strength for skin penetration, and their antibacterial activity against Gram-positive bacteria (Staphylococcus epidermidis and Staphylococcus aureus) as well as Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) was verified using bacterial suspension in vitro. Altogether, such a minimally invasive strategy exhibited good potential for realizing a broad-spectrum antibacterial effect, which may provide a practical methodology for the management of polymicrobial skin infection during clinical trials.

Plasma membrane vesicles of human umbilical cord mesenchymal stem cells ameliorate acetaminophen-induced damage in HepG2 cells: a novel stem cell therapy.

BACKGROUND: Acetaminophen (APAP) overdose is the common cause of acute liver failure (ALF) due to the oxidative damage of multiple cellular components. This study aimed to investigate whether plasma membrane vesicles (PMVs) from human umbilical cord mesenchymal stem cells (hUCMSCs) could be exploited as a novel stem cell therapy for APAP-induced liver injury. METHODS: PMVs from hUCMSCs were prepared with an improved procedure including a chemical enucleation step followed by a mechanical extrusion. PMVs of hUCMSCs were characterized and supplemented to hepatocyte cultures. Rescue of APAP-induced hepatocyte damage was evaluated. RESULTS: The hUCMSCs displayed typical fibroblastic morphology and multipotency when cultivated under adipogenic, osteogenic, or chondrogenic conditions. PMVs of hUCMSCs maintained the stem cell phenotype, including the presence of CD13, CD29, CD44, CD73, and HLA-ABC, but the absence of CD45, CD117, CD31, CD34, and HLA-DR on the plasma membrane surface. RT-PCR and transcriptomic analyses showed that PMVs were similar to hUCMSCs in terms of mRNA profile, including the expression of stemness genes GATA4/5/6, Nanog, and Oct1/2/4. GO term analysis showed that the most prominent reduced transcripts in PMVs belong to integral membrane components, extracellular vesicular exosome, and extracellular matrix. Immunofluorescence labeling/staining and confocal microscopy assays showed that PMVs enclosed cellular organelles, including mitochondria, lysosomes, proteasomes, and endoplasmic reticula. Incorporation of the fusogenic VSV-G viral membrane glycoprotein stimulated the endosomal release of PMV contents into the cytoplasm. Further, the addition of PMVs and a mitochondrial-targeted antioxidant Mito-Tempo into cultures of APAP-treated HepG2 cells resulted in reduced cell death, enhanced viability, and increased mitochondrial membrane potential. Lastly, this study demonstrated that the redox state and activities of aminotransferases were restored in APAP-treated HepG2 cells. CONCLUSIONS: The results suggest that PMVs from hUCMSCs could be used as a novel stem cell therapy for the treatment of APAP-induced liver injury.

Amino-containing tannic acid derivative-mediated universal coatings for multifunctional surface modification.

The development of a universal coating strategy for the construction of functional surfaces and modulation of surface properties is of great research interest. Tannic acid (TA) could serve as a sole precursor for the deposition of colorless coatings on substrate surfaces. However, the deposition of TA requires a high salt concentration (0.6 M), which may limit its practical application. Herein, primary amine moieties were introduced on the gallic acid groups in TA. The resultant amine-containing TA derivative (TAA) can self-polymerize under mild conditions (10 mM, Tris buffer), and form uniform and colorless coatings in a material-independent manner. In comparison with the TA coating under the same preparation conditions, the TAA coating exhibits an increased thickness as measured by ellipsometry. The TAA coating is adapted for secondary surface functionalization. The hydrophilic mPEG brushes can be grafted on the TAA coating to inhibit non-specific protein adsorption. A biotin probe can be immobilized on the TAA coating to promote specific binding with avidin. In addition, the TAA coating can be utilized for in situ reduction of silver ions to AgNPs. The resulting AgNP-loaded TAA coating can inhibit bacterial adhesion and prevent biofilm formation.

Multiple genetic factors affecting the pharmacokinetic and pharmacodynamic processes of tacrolimus in Chinese myasthenia gravis patients.

PURPOSE: Tacrolimus is a novel effective immunosuppressant for myasthenia gravis (MG) patients. However, the narrow therapeutic window, and high inter- and intrapatient variation in bioavailability largely limited its clinical application. This article intended to find the SNPs influencing clinical outcome and discover the possible mechanisms. METHODS: Based on the tagSNPs genotyped by Improved Multiple Ligase Detection Reaction, Plink 1.07 was used to find the SNPs having close interaction to tacrolimus serum concentration, QMG score changes or even reasonable drug dose. Then we searched several databases to predict the possible miRNA binding rs15524 sequence. Based on the prediction, dual-luciferase reporter assay and miRNA transfection were used to discover the mechanism of how SNP rs15524 controls tacrolimus serum concentration through influencing CYP3A5 expression. RESULTS: In this article, we found multiple SNPs on CYP3A4, CYP3A5, FKBP1A, NFATC2 genes were predicted closely related to tacrolimus serum concentration, therapeutic effect which reflected by QMG score changes or even reasonable drug dose. After in silico miRNA selection, possible relationship between hsa-miR-500a and rs15524 was found. With the help of dual-luciferase reporter assay, wild-type rs15524 (T allele) was found having a stronger binding affinity for hsa-miR-500a. Higher expression of CYP3A5 may also led by lower hsa-miR-500a level. CONCLUSIONS: SNP rs15524 may control CYP3A5 expression by affecting the binding affinity between CYP3A5 3'UTR and hsa-miR-500a. Wild type (T allele) 3'UTR of CYP3A5 has stronger binding affinity to hsa-miR-500a and cause lower CYP3A5 expression and higher tacrolimus serum concentration.

An improved cellular enucleation method with extracellular matrix and colchicine facilitates the study of nucleocytoplasmic interaction.

Enucleated mammalian cells (cytoplasts) have been widely used for studying differential roles of the cytoplasm and nucleus in various cellular processes. Here, we reported an improved enucleation protocol, in which cells were seeded in extracellular matrix (ECM)-coated 24-wells and spun at 4600 g and 35 °C for 60 min in the presence of cytochalasin B and colchicine. When glass-bottom wells were used, cellular structures and organelles in cytoplasts could be examined directly by confocal microscopy. Nuclear envelope rupture did not occur probably due to mild centrifugation conditions used in this study. Addition of paclitaxel or doxorubicin completely blocked proliferation of residual nucleated cells; however, to our surprise, paclitaxel dramatically prolonged the survival of cytoplasts. Results from Annexin V and Propidium Iodide staining showed that cytoplasts died predominantly by apoptosis, which was partially inhibited by ECM and further by paclitaxel. Mitochondria were mostly rod-shaped and formed a connected network in paclitaxel-treated cytoplasts, indicating lack of fusion and fission dynamics. Moreover, paclitaxel increased mitochondrial membrane potential, suggesting that perturbation of mitochondria might be critical to the survival of cytoplasts. In conclusion, we had established an efficient and fast procedure for enucleation of adherent animal cells, which could facilitate the investigation of nucleocytoplasmic interaction.

A Smart and Multifaceted Mobile Health System for Delivering Evidence-Based Secondary Prevention of Stroke in Rural China: Design, Development, and Feasibility Study.

BACKGROUND: Mobile health (mHealth) technologies hold great promise in improving the delivery of high-quality health care services. Yet, there has been little research so far applying mHealth technologies in the context of delivering stroke care in resource-limited rural regions. OBJECTIVE: This study aimed to introduce the design and development of an mHealth system targeting primary health care providers and to ascertain its feasibility in supporting the delivery of a System-Integrated techNology-Enabled Model of cAre (SINEMA) service for strengthening secondary prevention of stroke in rural China. METHODS: The SINEMA mHealth system was designed by a multidisciplinary team comprising public health researchers, neurologists, and information and communication technology experts. The iterative co-design and development of the mHealth system involved the following 5 steps: (1) assessing the needs of relevant end users through in-depth interviews of stakeholders, (2) designing the functional modules and evidence-based care content, (3) designing and building the system and user interface, (4) improving and enhancing the system through a 3-month pilot test in 4 villages, and (5) finalizing the system and deploying it in field trial, and finally, evaluating its feasibility through a survey of the dominant user group. RESULTS: From the in-depth interviews of 49 relevant stakeholders, we found that village doctors had limited capacity in caring for village-dwelling stroke patients in rural areas. Primary health care workers demonstrated real needs in receiving appropriate training and support from the mHealth system as well as great interests in using the mHealth technologies and tools. Using these findings, we designed a multifaceted mHealth system with 7 functional modules by following the iterative user-centered design and software development approach. The mHealth system, aimed at 3 different types of users (village doctors, town physicians, and county managers), was developed and utilized in a cluster-randomized controlled trial by 25 village doctors in a resource-limited county in rural China to manage 637 stroke patients between July 2017 and July 2018. In the end, a survey on the usability and functions of the mHealth system among village doctors (the dominant group of users, response rate=96%, 24/25) revealed that most of them were satisfied with the essential functions provided (71%) and were keen to continue using it (92%) after the study. CONCLUSIONS: The mHealth system was feasible for assisting primary health care providers in rural China in delivering the SINEMA service on the secondary prevention of stroke. Further research and initiatives in scaling up the SINEMA approach and this mHealth system to other resource-limited regions in China and beyond will likely enhance the quality and accessibility of essential secondary prevention among stroke patients. CLINICALTRIAL: ClinicalTrials.gov NCT03185858; https://clinicaltrials.gov/ct2/show/NCT03185858. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): RR2-10.1016/j.ahj.2018.08.015.

Hydrothermal derived protoporphyrin IX nanoparticles for inactivation and imaging of bacteria strains.

Overuse and abuse of antibiotics greatly hasten the development of microbial drug resistance and substantially threat to global public health. Developing alternative methods for combating bacterial infections is urgently required. In this work, a simple hydrothermal approach was employed to prepare the protoporphyrin IX-polyethylenimine nanoparticles (PPIX-PEI NPs) containing abundant amine groups and PPIX moieties. The as-obtained PPIX-PEI NPs exhibit antibacterial properties against both Gram-positive and Gram-negative bacteria. The presence of PPIX in the PPIX-PEI NPs can generate reactive oxygen species (ROS) under 635 nm laser irradiation, which enhance the antibacterial properties of the PPIX-PEI NPs against Gram-positive bacteria. Thus, the PPIX-PEI NPs display a synergistic antibacterial activity against Gram-positive bacteria in the combination of antibacterial photodynamic therapy (PDT). In addition, emission of red fluorescence by the PPIX-PEI NPs can help to differentiate bacteria and observe the bacterial morphologies using a confocal laser scanning microscope (CLSM).