ABSTRACT
Oil well cement is prone to corrosion and damage in carbon dioxide (CO2) acidic gas wells. In order to improve the anti-corrosion ability of oil well cement, polymer resin was used as the anti-corrosion material. The effect of polymer resin on the mechanical and corrosion properties of oil well cement was studied. The corrosion law of polymer anti-corrosion cement in an acidic gas environment was studied. The long-term corrosion degree of polymer anti-corrosion cement was evaluated using an improved neural network model. The cluster particle algorithm (PSO) was used to improve the accuracy of the neural network model. The results indicate that in acidic gas environments, the compressive strength of polymer anti-corrosion cement was reduced under the effect of CO2, and the corrosion depth was increased. The R2 of the prediction model PSO-BPNN3 is 0.9970, and the test error is 0.0136. When corroded for 365 days at 50 °C and 25 MPa pressure of CO2, the corrosion degree of the polymer anti-corrosion cement was 43.6%. The corrosion depth of uncorroded cement stone is 76.69%, which is relatively reduced by 33.09%. The corrosion resistance of cement can be effectively improved by using polymer resin. Using the PSO-BP neural network to evaluate the long-term corrosion changes of polymer anti-corrosion cement under complex acidic gas conditions guides the evaluation of its corrosion resistance.
ABSTRACT
The integrity of oil well cement sheaths is closely related to the long-term production safety of oil and gas wells. The primary material used to form a cement sheath is brittle. In order to reduce the brittleness of oil well cement and improve its flexibility and resistance to stress damage, nano-silica was used to modify polymer elastic particles, and their properties were analyzed. The influence of the modified polymer particles on the properties of oil well cement-based composite materials was studied, and the microstructure of the polymer particle cement sample was analyzed. The results showed that nano-silica effectively encapsulates polymer particles, improves their hydrophilicity, and achieves a maximum temperature resistance of 415 °C. The effect of the modified polymer particles on the compressive strength of cement sample is reduced. Polymer particles with different dosages can effectively reduce the elastic modulus of cement paste, improve the deformation and elasticity of cement paste, and enhance the toughness of cement paste. Microstructural analysis showed that the polymer particles are embedded in the hydration products, which is the main reason for the improvement in the elasticity of cement paste. At the same time, polymer particle cement slurry can ensure the integrity of the cement sample after it is impacted, which helps to improve the ability of oil well cement-based composite materials to resist stress damage underground.
ABSTRACT
Offshore oil- and gas-field development is shifting from shallow water to deepwater on a large scale. Deepwater shallow bentonite slurry drilling fluid has a single composition and a simple structure. Therefore, the bentonite slurry drilling fluid has been neglected for the shallow wellbore strengthening ability. Based on the shallow geological characteristics and bentonite hydration mechanism, considering the economy and application effect, the optimization of bentonite slurry drilling fluid from four aspects of viscosity enhancement, adsorption, trapping, and physical plugging to carry out deepwater shallow wellbore strengthening research has been undertaken. For an indoor simulation of bentonite slurry and its drilling slurry-making process using a 2-10% mass concentration of bentonite slurry drilling fluid, laser particle size analysis found an interesting phenomenon different from the traditional understanding: for every 5% increase in particle size accumulation in the range of 0.1-100 µm, the bentonite slurry particle size increases linearly. Based on this interesting phenomenon, the basic performance of drilling fluids with different concentrations of bentonite slurry was evaluated. Experiments were conducted to introduce cationic emulsified asphalt as a deformation filler and to explore a new inexpensive drilling and wellbore strengthening material, AEH-P. The effectiveness of deepwater shallow strengthening was evaluated for AEH-P and cationic emulsified asphalt from both mechanistic and experimental aspects. It is obvious that the wellbore strengthening effect is the result of both particle settling and particle size matching. By exploring the relationship among bentonite slurry hydration dispersion, the charged nature, particle concentration, and the wellbore strengthening effect, a set of low-cost deepwater shallow bentonite slurry drilling fluids with a good wellbore strengthening effect are constructed. The research results provide a method to strengthen the wellbore for the subsequent fast and efficient drilling of deepwater shallow wells, further improving the drilling efficiency.
ABSTRACT
WO3 as tungsten dopant is introduced into lithium nickel cobalt manganese (LiNi0.83Co0.11Mn0.06O2, NCM) layered oxide powders to synthesize W6+-doped NCM cathode materials during the lithiation process of the hydroxide precursor. Introducing W6+ into the lattice can lead to the diversities of the crystal structure, surface morphology, and electrochemical performance. The crystal structure confirmed by X-ray diffraction indicates that the W6+-doped oxide powders present a typical R-3m layered structure with larger interplanar distance and cell volume. Also, scanning electron microscope images reveal that the primary particles shrink forming a tighter surface under the effect of W6+, while the specific changes gradually aggravate with increase in the content of W6+ added. The excellent electrochemical stability of W6+-doped samples is observed, as the stable host structure is reinforced by the strong W-O bond. The stable structure does not only inhibit the anisotropic volume change caused by repetitive H2 â H3 phase transitions, but also sustains the integrated structure to impede the formation of microcracks and the appearance of more side reactions. This research provides an effective route on investigating the potential association between electrochemical performance and structure change for W6+-doped strategy.
ABSTRACT
Oil-well cement-based materials have inherent brittleness; therefore, they cannot be directly used to seal oil and gas wells for a long time. To improve the elasticity of oil-well cement-based composites, a flexible epoxy resin system was developed. The flexibility, TG, and SEM of the cured resin system were evaluated. At the same time, the resin was added to oil-well cement-based materials to improve its elasticity. The compressive strength and elastic modulus of resin cement stone were tested, and the microstructure was analyzed by XRD, TG, and SEM/EDS. The results showed that the structure of the cured resin is compact, the thermal decomposition temperature is 243.9 °C, and it can recover its original shape after compression. At the curing age of 28 days, the compressive strength of cement-based composites containing 30% resin decreased by 26.7%, while the elastic modulus significantly decreased by 63.2%, and the elasticity of cement-based composites was significantly improved. The formation of hydration products (e.g., calcium silicate hydrate, and calcium hydroxide) in the resin cement slurry is obviously lower than that of pure cement, which is the reason for the decrease in compressive strength. The flexible structure of polymer particles and polymer film formed by epoxy resin is distributed inside the cement stone, which significantly improves the elasticity of oil-well cement-based composites. The results of this paper are helpful for the design of elastic cement slurry systems.
ABSTRACT
Reducing economic losses and protecting producing strata are important links in the process of oil and gas exploration and exploitation. The key to avoid these problems lies in reducing well leakage accidents in the process of exploitation, in which the correct selection of plugging materials plays a decisive role. In view of the low sealing strength, complex construction, difficulty in unblocking, and high cost of the bridge lost-circulation material (LCM) currently used in plugging, this paper demonstrates the development of a highly elastic honeycomb porous LCM in a targeted manner. Indoor evaluation of the material shows it has good compression resilience and tensile strength: its 50% compression permanent deformation is less than 10% and tensile strength is more than 100 kPa; its retention rate under acidic conditions is more than 97%; it is basically not acid soluble; and at 100 °C aging conditions, the abovementioned performance and properties are maintained in a good manner. Due to the rebound characteristics of the highly elastic honeycomb porous LCM, the material can smoothly enter into different fractures to achieve a good plugging effect under the condition of choosing a suitable size.
ABSTRACT
The application of fiber in the completion fluid can improve the rheological properties of the completion fluid and the plugging quality of the production layer by the completion fluid and reduce the damage of the filtrate to the reservoir formation. However, there are few studies on the influence of fibers on the rheological properties of completion fluids and the flow behavior in pores. In this paper, plant fiber, mineral fiber, and synthetic fiber are discussed. Carbon fiber, bamboo fiber, polypropylene fiber, and polyester fiber are selected as research objects. The dependence of the rheological property of polymer solution on fiber type, fiber concentration, temperature, and shear rate is evaluated. The evaluation is carried out by observing the microscopic state of the fiber through a microscope and a scanning electron microscope, testing the rheological property parameters of the fiber with an OFITE 900 rheological tester, and fitting with the Herschel-Bulkley model. The results show that polypropylene fiber and carbon fiber have the best dispersion in polymer solution. The higher the fiber content, the greater the influence of fiber on the rheological properties of the solution. Compared with the other three fibers, carbon fiber has the greatest influence on the rheological properties of polymer solution. When the temperature is lower than 70 °C, the influence of the fiber on the rheological properties of the solution is not affected by the temperature. When the temperature exceeds 70 °C, the carbon fiber and polypropylene fiber are affected by the temperature, and the viscosity of the polymer solution is increased. The flow behavior of fiber suspensions in pores varies with the flow factor n. Carbon fiber suspensions are most conducive to the transition of polymer solution to plate laminar flow, which can improve the bearing capacity of plugging materials.
ABSTRACT
The poor lubrication performance of water-based drilling mud hinders its application in the drilling process of extended, reach horizontal wells. To overcome this shortcoming, polyaspartate (PA) and poly(ethylene glycol) (PEG) were used to improve the lubrication performance of the water-based drilling mud. The conventional performances, lubrication performance, and micro-image of antiwear steel balls of the modified water-based drilling mud were analyzed. The results show that the coefficient of friction (COF) of the water-based drilling mud mixed with 10% PA and 5% PEG was the lowest, reaching 0.094, the reduction rate of COF was 63.1%, and the drilling mud cake stuck factor was also the lowest. The addition of PA and PEG had no effect on the rheological properties of water-based drilling mud and also can significantly reduce the filtrate volume; the reduction rate of the filtrate volume reached 43.5%. All of these result from the synergistic effect of PA and PEG; they are adsorbed on the metal surface and the mud cake to form a lubricating film. At the same time, the lubricants also changed the appearance of the solid particles in the mud cake, which reduced the friction between the mud cake and the drilling tool. Moreover, effects of the influence of drilling mud properties on lubricants (alkali metal ions, pH, temperature, and drilling mud density) were examined. The water-based drilling fluid with the synergistic effect of PEG and PA shows similar lubrication performance as the oil-based drilling fluid and can meet the technical requirements of corresponding horizontal wells.
ABSTRACT
Exploring deep and ultradeep wells has rapidly become more significant to meet the global demand for oil and gas. The study of rheological and filtration-loss properties is essential to designing drilling muds and determining their performance under operational conditions. Rheological and filtration-loss properties of drilling muds were found to have a negative impact when exposed to elevated temperatures in the wells. In this study, an amphoteric polymer (abbreviated to PEX) was synthesized and characterized using a combination of analyses: FTIR, SEM, 13CNMR, and TGA. The synthesized PEX was used as an additive in water-based drilling muds to improve rheological properties and reduce fluid loss at elevated temperatures (180-220 °C). The experimental results demonstrated that inclusion of an optimal concentration of PEX (0.3 wt %) into the drilling mud formulation increased the rheological properties by 62.3% and decreased the filtration loss by 63.5% at an aging temperature of 180 °C. Moreover, PEX was found to perform superbly compared to polyanionic cellulose (PAC-LV) and polyacrylamide (PAM), the widely used drilling mud additives. PEX not only improved the rheological properties and reduced the filtration loss behavior but also bolstered the thermostability of the drilling mud formulation. It was concluded that the rigidity and amphoteric nature of PEX accounted for the exceptional performance and temperature resistance for PEX-drilling mud formulations. Succinctly, PEX exhibits admirable properties in smart drilling mud formulations for drilling operations under high-temperature geothermal conditions. Moreover, in terms of rheological models, the Herschel-Bulkley model adequately described the rheological properties of all the studied drilling mud formulations.
ABSTRACT
The great amount of solid particles contained in a weighting agent is a major cause of the problems in both rheology properties and damage control mechanism of an oil-based drilling fluid (OBM). Therefore, a proper type of weighting agent can be a solution for the application of OBM. In this study, three weighting agents that have been commonly used with OBM, namely, standard barite, submicron barite and superfine manganese ore, are studied. Rheological properties of OBM and the degree of formation damage are assessed with regard to the three weighting agents. The agents are also studied in aspects of particle size, micromorphology, filtration loss and wall-building property, acid dissolution efficiency of mud cake, lubricity and sedimentation stability to analyse the effects of the agents on rheological properties and the degree of damage as well as to figure out the mechanism of rheology control and damage control. For the OBM, there is a mutual effect between rheological stability and the degree of damage. In consideration of the agents' properties, we can enhance the rheological stability of the OBM and control the degree of formation damage by properly selecting particle size, using acid-soluble materials and forming the mud cake with ultra-low permeability that can easily be cleared away.