Toward Selective Transport of Monovalent Metal Ions with High Permeability Based on Crown Ether-Encapsulated Metal-Organic Framework Sub-Nanochannels.

Achieving selective transport of monovalent metal ions with high precision and permeability analogues to biological protein ion channels has long been explored for fundamental research and various applications, such as ion sieving, mineral extraction, and energy harvesting and conversion. However, it still remains a significant challenge to construct artificial nanofluidic devices to realize the trade-off effects between selective ion transportation and high ion permeability. In this work, we report a bioinspired functional micropipet with in situ growth of crown ether-encapsulated metal-organic frameworks (MOFs) inside the tip and realize selective transport of monovalent metal ions. The functional ion-selective micropipet with sub-nanochannels was constructed by the interfacial growth method with the formation of composite MOFs consisting of ZIF-8 and 15-crown-5. The resulting micropipet device exhibited obvious monovalent ion selectivity and high flux of Li+ due to the synergistic effects of size sieving in subnanoconfined space and specific coordination of 15-crown-5 toward Na+. The selectivity of Li+/Na+, Li+/K+, Li+/Ca2+, and Li+/Mg2+ with 15-crown-5@ZIF-8-functionalized micropipet reached 3.9, 5.2, 105.8, and 122.4, respectively, which had an obvious enhancement compared to that with ZIF-8. Notably, the ion flux of Li+ can reach up to 93.8 ± 3.6 mol h-1·m-2 that is much higher than previously reported values. Furthermore, the functional micropipet with 15-crown-5@ZIF-8 sub-nanochannels exhibited stable Li+ selectivity under various conditions, such as different ion concentrations, pH values, and mixed ion solutions. This work not only provides new opportunities for the development of MOF-based nanofluidic devices for selective ion transport but also facilitates the promising practical applications in lithium extraction from salt-like brines, sewage treatment, and other related aspects.

Enhanced Intrinsic Self-Healing Performance of Mussel Inspired Coating via In-Situ Cation Capture.

Under damp or aquatic conditions, the corrosion products deposited on micro-cracks/pore sites bring about the failure of intrinsically healable organic coatings. Inspired by mussels, a composite coating of poly (methyl methacrylate-co-butyl acylate-co-dopamine acrylamide)/phenylalanine-functionalized boron nitride (PMBD/BN-Phe) is successfully prepared on the reinforcing steel, which exhibits excellent anti-corrosion and underwater self-healing capabilities. The self-healing property of PMBD is derived from the synergistic effect of hydrogen bonding and metal-ligand coordination bonding, and thereby the continuous generation of corrosion products can be significantly suppressed through in situ capture of cations by the catechol group. Furthermore, the corrosion protection ability can be remarkably improved by the labyrinth effect of BN and the inhibition role of Phe, and the desired interfacial compatibility can be formed by the hydrogen bonds between BN-Phe and PMBD matrix. The corrosion current density (icorr) of PMBD/BN-Phe coating is determined as 7.95 × 10-11 A cm-2. The low-frequency impedance modulus (|Z|f  =  0.0 1 Hz is remained at 3.47 × 109 Ω cm2, indicating an ultra-high self-healing efficiency (≈89.5%). It is anticipated to provide a unique strategy for development of an underwater self-healing coating and robust durability for application in anti-corrosion engineering of marine buildings.

PNA-Functionalized, Silica Nanowires-Filled Glass Microtube for Ultrasensitive and Label-Free Detection of miRNA-21.

MicroRNAs (miRNAs) are endogenous and noncoding single-stranded RNA molecules with a length of approximately 18-25 nucleotides, which play an undeniable role in early cancer screening. Therefore, it is very important to develop an ultrasensitive and highly specific method for detecting miRNAs. Here, we present a bottom-up assembly approach for modifying glass microtubes with silica nanowires (SiNWs) and develop a label-free sensing platform for miRNA-21 detection. The three-dimensional (3D) networks formed by SiNWs make them abundant and highly accessible sites for binding with peptide nucleic acid (PNA). As a receptor, PNA has no phosphate groups and exhibits an overall electrically neutral state, resulting in a relatively small repulsion between PNA and RNA, which can improve the hybridization efficiency. The SiNWs-filled glass microtube (SiNWs@GMT) sensor enables ultrasensitive, label-free detection of miRNA-21 with a detection limit as low as 1 aM at a detection range of 1 aM-100 nM. Noteworthy, the sensor can still detect miRNA-21 in the range of 102-108 fM in complex solutions containing 1000-fold homologous interference of miRNAs. The high anti-interference performance of the sensor enables it to specifically recognize target miRNA-21 in the presence of other miRNAs and distinguish 1-, 3-mismatch nucleotide sequences. Significantly, the sensor platform is able to detect miRNA-21 in the lysate of breast cancer cell lines (e.g., MCF-7 cells and MDA-MB-231 cells), indicating that it has good potential in the screening of early breast cancers.

Crown-Ether Crystal Channel Membranes with Subnanometer Pores for Selective Na+ Transport.

Emulating biological sodium ion channels to achieve high selectivity and rapid Na+ transport is important for water desalination, energy conversion, and separation processes. However, the development of artificial ion channels, especially multichannels, to achieve high ion selectivity, remains a challenge. In this work, we demonstrate the fabrication of ion channel membranes utilizing crown-ether crystals (DA18C6-nitrate crystals), which feature extremely consistent subnanometer pores. The polyethylene terephthalate (PET) membranes were initially subjected to amination, followed by the in situ growth of DA18C6-nitrate crystals to establish ordered multichannels aimed at facilitating selective Na+ conductance. These channels allow rapid Na+ transport while inhibiting the migration of other ions (K+ and Ca2+). The Na+ transport rate was 2.15 mol m-2 h-1, resulting in the Na+/K+ and Na+/Ca2+ selectivity ratios of 6.53 and 12.56, respectively. Due to the immobilization of the crown-ether ring, when the size of the transmembrane ion exceeded that of the crown-ether ring's cavity, the ions had to undergo a dehydration process to pass through the channel. This resulted in the ions encountering a higher energy barrier upon entering the channel, making it more difficult for them to permeate. However, the size of Na+ was compatible with the cavity of the crown-ether ring and was able to displace the hydrated layer effectively, facilitating selective Na+ translocation. In summary, this research offers a promising approach for the future development of functionalized ion channels and efficient membrane materials tailored for high-performance Na+ separation.

A data-mining study on the prediction of head injury in traffic accidents among vulnerable road users with varying body sizes and head anatomical characteristics.

Body sizes and head anatomical characteristics play the major role in the head injuries sustained by vulnerable road users (VRU) in traffic accidents. In this study, in order to study the influence mechanism of body sizes and head anatomical characteristics on head injury, we used age, gender, height, and Body Mass Index (BMI) as characteristic parameters to develop the personalized human body multi-rigid body (MB) models and head finite element (FE) models. Next, using simulation calculations, we developed the VRU head injury dataset based on the personalized models. In the dataset, the dependent variables were the degree of head injury and the brain tissue von Mises value, while the independent variables were height, BMI, age, gender, traffic participation status, and vehicle speed. The statistical results of the dataset show that the von Mises value of VRU brain tissue during collision ranges from 4.4 kPa to 46.9 kPa at speeds between 20 and 60 km/h. The effects of anatomical characteristics on head injury include: the risk of a more serious head injury of VRU rises with age; VRU with higher BMIs has less head injury in collision accidents; height has very erratic and nonlinear impacts on the von Mises values of the VRU's brain tissue; and the severity of head injury is not significantly influenced by VRU's gender. Furthermore, we developed the classification prediction models of head injury degree and the regression prediction models of head injury response parameter by applying eight different data mining algorithms to this dataset. The classification prediction models have the best accuracy of 0.89 and the best R2 value of 0.85 for the regression prediction models.

Effect of Amino Silicone Oil-Phosphorylation Hybrid Modification on the Properties of Microcellulose Fibers.

Microcellulose materials are increasingly considered multifunctional candidates for emerging energy applications. Microcellulose fibers (MCF) are a kind of bio-based reinforcement in composites, and their hydrophilic character hinders their wide application in industry. Thus, in the present work, MCF was hybrid-modified by amino silicone oil-phosphorylated to fabricate hydrophobic, thermal stability, and flame-retardant microcellulose fibers for potential application in vehicle engineering. The results showed that the amino silicone oil-phosphorylated (ASOP) hybrid modification could transform the surface property of microcellulose from hydrophilic to hydrophobic and improve the compatibility between MCF and resin matrix. Meanwhile, the ASOP treatment led to the formation of an amino silicone oil film layer on the surface of the microcellulose, which improved the thermal stability of the MCF. Furthermore, the ASOP hybrid modification microcellulose fibers paper (100% microcellulose fibers paper) was transformed from flammable to flame-retardant and showed self-extinguishing behavior after burning under flame for 2 s. The flame-retardant mechanism was attributed to the formation of the char layer in the condensed phase and the production of non-combustible gases in the gaseous phase.

Silica Nanowires-Filled Glass Microporous Sensor for the Ultrasensitive Detection of Deoxyribonucleic Acid.

DNA carries genetic information and can serve as an important biomarker for the early diagnosis and assessment of the disease prognosis. Here, we propose a bottom-up assembly method for a silica nanowire-filled glass microporous (SiNWs@GMP) sensor and develop a universal sensing platform for the ultrasensitive and specific detection of DNA. The three-dimensional network structure formed by SiNWs provides them with highly abundant and accessible binding sites, allowing for the immobilization of a large amount of capture probe DNA, thereby enabling more target DNA to hybridize with the capture probe DNA to improve detection performance. Therefore, the SiNWs@GMP sensor achieves ultrasensitive detection of target DNA. In the detection range of 1 aM to 100 fM, there is a good linear relationship between the decrease rate of current signal and the concentration of target DNA, and the detection limit is as low as 1 aM. The developed SiNWs@GMP sensor can distinguish target DNA sequences that are 1-, 3-, and 5-mismatched, and specifically recognize target DNA from complex mixed solution. Furthermore, based on this excellent selectivity and specificity, we validate the universality of this sensing strategy by detecting DNA (H1N1 and H5N1) sequences associated with the avian influenza virus. By replacing the types of nucleic acid aptamers, it is expected to achieve a wide range and low detection limit sensitive detection of various biological molecules. The results indicate that the developed universal sensing platform has ultrahigh sensitivity, excellent selectivity, stability, and acceptable reproducibility, demonstrating its potential application in DNA bioanalysis.

Safflower yellow for injection enhances anti-coagulation of warfarin in rats: implications in pharmacodynamics and pharmacokinetics.

This study investigated whether Safflower Yellow for injection (SYI) would affect the anticoagulation of warfarin in rats.Wistar male rats were divided into six groups randomly and administered with SYI (9 mg/kg, intraperitoneal injection) in single-dose and steady-dose warfarin (0.2 mg/kg, oral gavage), respectively. The pharmacodynamic parameters of PT and APTT were measured by a coagulation analyser. R/S-warfarin concentration was measured by UHPLC-MS/MS, and pharmacokinetic parameters calculated using DAS 2.0 software.The single-dose study demonstrated that SYI, alone or co-administered with warfarin, could significantly increase PT, INR, and APTT values (p < 0.01). R-warfarin Cmax, AUC, and t1/2 values increased by 9.25% (p > 0.05), 25.96% (p < 0.01), and 26.17% (p < 0.01), respectively, whereas the CL/F value reduced by 22.22% (p < 0.01) in the presence of SYI. Meanwhile, S-warfarin Cmax, AUC, and t1/2 values increased by 37.41%, 32.11%, and 31.73% (all p < 0.01), respectively, whereas the CL/F value reduced by 33.33% (p < 0.01). The steady-dose study showed that PT, INR, APTT, and the concentrations of R/S-warfarin increased significantly when SYI was co-administered with warfarin (p < 0.01).SYI can enhance warfarin's anticoagulation intensity and decelerate its metabolism in rats.

Pyrolysis of exhausted biochar sorbent: Fates of cadmium and generation of products.

Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.

Interphase Engineering Enhanced Electro-chemical Stability of Prelithiated Anode.

Prelithiation is an essential technology to compensate for the initial lithium loss of lithium-ion batteries due to the formation of solid electrolyte interphase (SEI) and irreversible structure change. However, the prelithiated materials/electrodes become more reactive with air and electrolyte resulting in unwanted side reactions and contaminations, which makes it difficult for the practical application of prelithiation technology. To address this problem, herein, interphase engineering through a simple solution treatment after chemical prelithiation is proposed to protect the prelithiated electrode. The used solutions are carefully selected, and the composition and nanostructure of the as-formed artificial SEIs are revealed by cryogenic electron microscopy and X-ray photoelectron spectroscopy. The electrochemical evaluation demonstrates the unique merits of this artificial SEI, especially for the fluorinated interphase, which not only enhances the interfacial ion transport but also increases the tolerance of the prelithiated electrode to the air. The treated graphite electrode shows an initial Coulombic efficiency of 129.4%, a high capacity of 170 mAh g-1 at 3 C, and negligible capacity decay after 200 cycles at 1 C. These findings not only provide a facile, universal, and controllable method to construct an artificial SEI but also enlighten the upgrade of battery fabrication and the alternative use of advanced electrolytes.

Research on the Impact of Consumer Experience Satisfaction on Green Food Repurchase Intention.

With the continuous improvement in people's living standards and the change in consumption concept, green food is favored by more and more consumers. Consumer repurchase behavior is a necessary condition to activate the market, expand the consumption scale and stabilize the continuous growth of the market. Repurchase intention is the most direct factor affecting consumers' green food repurchase intention. Therefore, it is necessary to study consumers green food repurchase intentions. This study collects data from 303 consumer surveys on green food consumption to explore the impact of consumer satisfaction with consumption experience on green food repurchase intention and further explore the mechanisms and influence boundaries. The results show that (1) consumer experience satisfaction positively affects green food repurchase intention; (2) consumer experience satisfaction can improve consumers' green food repurchase intention through consumer perceptions of social value, green self-efficacy and warm glow; (3) the higher the degree of consumer inertia, the stronger the influence of green self-efficacy and warm glow on consumers' green food repurchase intention; and (4) the higher the degree of consumer subjective norms, the stronger the influence of consumer perceived social value, green self-efficacy and warm glow on the consumer's green food repurchase intention. This study provides a new perspective and theoretical framework for promoting consumers' green food repurchase intention, and it may have certain theoretical significance and practical impact on green food market growth, sustainable carrying of the ecological environment and high-quality development of agriculture.

Inversely engineered biomimetic flexible network scaffolds for soft tissue regeneration.

Graft-host mechanical mismatch has been a longstanding issue in clinical applications of synthetic scaffolds for soft tissue regeneration. Although numerous efforts have been devoted to resolve this grand challenge, the regenerative performance of existing synthetic scaffolds remains limited by slow tissue growth (comparing to autograft) and mechanical failures. We demonstrate a class of rationally designed flexible network scaffolds that can precisely replicate nonlinear mechanical responses of soft tissues and enhance tissue regeneration via reduced graft-host mechanical mismatch. Such flexible network scaffold includes a tubular network frame containing inversely engineered curved microstructures to produce desired mechanical properties, with an electrospun ultrathin film wrapped around the network to offer a proper microenvironment for cell growth. Using rat models with sciatic nerve defects or Achilles tendon injuries, our network scaffolds show regenerative performances evidently superior to that of clinically approved electrospun conduit scaffolds and achieve similar outcomes to autologous nerve transplantation in prevention of target organ atrophy and recovery of static sciatic index.

Mechanically-Guided 3D Assembly for Architected Flexible Electronics.

Architected flexible electronic devices with rationally designed 3D geometries have found essential applications in biology, medicine, therapeutics, sensing/imaging, energy, robotics, and daily healthcare. Mechanically-guided 3D assembly methods, exploiting mechanics principles of materials and structures to transform planar electronic devices fabricated using mature semiconductor techniques into 3D architected ones, are promising routes to such architected flexible electronic devices. Here, we comprehensively review mechanically-guided 3D assembly methods for architected flexible electronics. Mainstream methods of mechanically-guided 3D assembly are classified and discussed on the basis of their fundamental deformation modes (i.e., rolling, folding, curving, and buckling). Diverse 3D interconnects and device forms are then summarized, which correspond to the two key components of an architected flexible electronic device. Afterward, structure-induced functionalities are highlighted to provide guidelines for function-driven structural designs of flexible electronics, followed by a collective summary of their resulting applications. Finally, conclusions and outlooks are given, covering routes to achieve extreme deformations and dimensions, inverse design methods, and encapsulation strategies of architected 3D flexible electronics, as well as perspectives on future applications.

Interfacial Passivation Enormously Enhances Electroluminescence of Triphenylphosphine Cu4 I4 Cube.

Defect is one of the key factors limiting optoelectronic performances of organic-inorganic hybrid systems. Although high-efficiency bidentate ligands based electroluminescent (EL) clusters reported, until present, only few EL clusters based on monodentate ligands are realized since their structural instability induces more surface/interface defects. Herein, this bottleneck is first overcome in virtue of interfacial passivation by electron transporting layers (ETL). Through using TmPyPB with meta-linked pyridines as ETL, photoluminescent (PL) and EL quantum efficiencies of the simplest monophosphine Cu4 I4 cube [TPP]4 Cu4 I4 are greatly improved by ≈2 and 23 folds, respectively, as well as ≈200 folds increased luminance, corresponding to a huge leap from nearly unlighted (<20 nits) to highly bright (>3000 nits). The passivation effect of TmPyPB on surface defects of cluster layer is embodied as preventing interfacial charge trapping and suppressing exciton nonradiation.

Enhanced post-quantum key escrow system for supervised data conflict of interest based on consortium blockchain.

Consortium blockchains offer privacy for members while allowing supervision peers access to on-chain data under certain circumstances. However, current key escrow schemes rely on vulnerable traditional asymmetric encryption/decryption algorithms. To address this issue, we have designed and implemented an enhanced post-quantum key escrow system for consortium blockchains. Our system integrates NIST post-quantum public-key encryption/KEM algorithms and various post-quantum cryptographic tools to provide a fine-grained, single-point-of-dishonest-resistant, collusion-proof and privacy-preserving solution. We also offer chaincodes, related APIs, and invoking command lines for development. Finally, we perform detailed security analysis and performance evaluation, including the consumed time of chaincode execution and the needed on-chain storage space, and we also highlight the security and performance of related post-quantum KEM algorithms on consortium blockchain.

A fast methodology for generating skeletal FEM with detailed human geometric features based on CPD and RBF algorithms.

Due to the significant effects of the human anatomical characteristics on the injury mechanism of passenger in traffic accidents, it is necessary to develop human body FEM (Finite Element Model) with detailed anatomical characteristics. However, traditional development of a human body FEM is an extremely complicated process. In particular, the meshing of human body is a huge and time-consuming project. In this paper, a new fast methodology based on CPD (Coherent Point Drift) and RBF (Radial Basis Function) was proposed to achieve the rapid developing the FEM of human bone with detailed anatomical characteristics. In this methodology, the mesh morphing technology based the RBF was used to generate FEM mesh in the geometry extracted from the target CT (Computed Tomography) data. In order to further improve the accuracy and speed of mesh morphing, the target geometric feature points required in the mesh morphing process were realized via the rapid and automatic generation based on the point-cloud registration technology of the CPD algorithm. Finally, this new methodology was used to generate a 3-year-old ribcage FEM consisting of a total of 27,728 elements with mesh size 3-5 mm based on the THUMS (Total Human Model for Safety) adult model. In the entire process of generating this new ribcage model, it only took about 2.7 s. The average error between the new FEM and target geometries was only about 2.7 mm. This indicated that the new FEM well described the detailed anatomical characteristics of target geometry, thus importantly revealing that the mesh quality of the new FEM was basically similar to that of source FEM.

A Highly Sensitive Triboelectric Quasi-Zero Stiffness Vibration Sensor with Ultrawide Frequency Response.

Sensors based on triboelectric nanogenerators (TENGs) have gained worldwide interest owing to their advantages of low cost and self-powering. However, the detection of most triboelectric vibration sensors (TVS) is restricted to low frequency, whereas high-frequency vibration signals are successfully measured in recent studies; their sensitivity still requires improvement. Hence, a highly sensitive vibration sensor based on TENG (HSVS-TENG) with ultrawide frequency response is presented. This study is the first to introduce a quasi-zero stiffness structure into the TENG to minimize the driving force by optimizing the magnetic induction intensity and the weight of the moving part. The results show that the HSVS-TENG can measure vibrations with frequencies ranging from 2.5 to 4000 Hz, with a sensitivity ranging from 0.32 to 134.9 V g-1 . Moreover, the sensor exhibits a good linear response versus the applied acceleration, and the linearity ranges from 0.08 to 2.81 V g-1 . The self-powered sensor can monitor the running state and fault type of the key components with a recognition accuracy of 98.9% by leveraging machine-learning algorithms. The results reach a new height for the ultrawide frequency response and high sensitivity of the TVS and provide an idea for a follow-up high-resolution TVS.

Mild heat treatment achieved better inactivation of Salmonella and preservation of almond quality than ultraviolet light and chemical sanitizers.

This study was conducted to compare the effects of ultraviolet light (UV), chemical sanitizers, and heat treatments on Salmonella inactivation and preservation of almond quality. Whole, skinless, and sliced almonds, representing different shape and surface topography, were inoculated with a Salmonella cocktail consisting of S. Montevideo, S. Newport, S. Typhimurium, S. Heidelberg, and S. Enteritidis. Inoculated almonds (50 g) were treated by UV (30 mW/cm2, 30 or 60 min), 75 °C heat (up to 150 min), and chemical sanitizers (3 % hydrogen peroxide (H2O2) and 1 % cetylpyridinium chloride (CPC), 30 or 60 min) alone or in combinations. Uninoculated almonds were similarly treated for analyzing color, visual appearance, and weight changes. In general, UV treatment alone was ineffective in inactivating Salmonella; the 30- and 60-min UV treatments reduced Salmonella by 1.3 (± 0.1) and 1.7 (± 0.1), 2.7 (± 0.2) and 3.3 (± 0.1), and 1.3 (± 0.1) and 1.7 (± 0.1) log CFU/g on whole, skinless, and sliced almonds, respectively. Prior wetting of almonds with water and chemical solutions in a few cases significantly (P < 0.05) increased the UV inactivation of Salmonella. The most pronounced Salmonella killing effect achieved by the combined treatments were: 1-min H2O2 dipping followed by 60-min UV treatment for whole (3.0 logs) and skinless almonds (3.8 logs) and 1-min CPC dipping followed by 60-min UV treatment for sliced almonds (3.0 logs). However, none of those achieved >4 log reductions of Salmonella as required by FDA. The 30-min UV treatment produced discolored but overall acceptable almonds, whereas the 60-min UV treatment led to deteriorated almonds including a dark color, oil extraction, and shrunk kernel size. Prior wetting reduced the sample weight loss but caused local burning and kernel cracking. A sequential approach of a 60-min 75 °C heat treatment and two 30-min wet UV treatments successfully reduced Salmonella by >4 logs, but more severe kernel cracking occurred. In contrast, a single heat treatment of vacuum packaged whole almonds at 75 °C for 150 min was capable of achieving >5 log reductions of Salmonella while preserving almond color and visual qualities and minimizing weight loss. These results clearly demonstrated that the heat treatment was a much better processing technology than UV and sanitizers for raw almond pasteurization.

The influence of almond's water activity and storage temperature on Salmonella survival and thermal resistance.

This study investigated the effects of inoculation method, water activity (aw), packaging method, and storage temperature and duration on the survival of Salmonella on almonds as well as their resistance to subsequent thermal treatments. Whole almond kernels were inoculated with a broth-based or agar-based growth Salmonella cocktail and conditioned to aw of 0.52, 0.43 or 0.27. Inoculated almonds with aw of 0.43 were treated with a previously validated treatment (4 h of dry heat at 73 °C) to determine the potential differences in heat resistance resulted from the two inoculation methods. The inoculation method did not significantly (P > 0.05) impact the thermal resistance of Salmonella. Inoculated almonds at aw of 0.52 and 0.27 were either vacuum packaged in moisture-impermeable mylar bags or non-vacuum packaged in moisture-permeable polyethylene bags before stored at 35, 22, 4, or -18 °C for up to 28 days. At selected storage intervals, almonds were measured for aw, analyzed for Salmonella population level, and subjected to dry heat treatment at 75 °C. Over the month-long storage of almonds, Salmonella populations remained almost unchanged (<0.2 log CFU/g) at 4 °C and -18 °C and declined slightly (<0.8 log CFU/g) at 22 °C and more substantially (1.6-2.0 log CFU/g) at 35 °C regardless of the inoculation method, packaging method, and almond aw. When stored at 35 °C, almonds with initial aw of 0.52 had significantly higher (P < 0.05) Salmonella reductions than those with initial aw of 0.27. Prior storage of almonds vacuum packaged in mylar bags at temperatures between -18 °C and 35 °C for 28 days affected their aw levels but did not significantly (P > 0.05) affect the subsequent thermal resistance of Salmonella at 75 °C regardless of almond aw and storage duration. Salmonella on almonds with higher aw was more sensitive to heat treatment than those with lower aw. To achieve >5 log CFU/g reductions of Salmonella, a dry heat treatment at 75 °C for 4 and 6 h was needed for almonds with initial aw of 0.52 and 0.27, respectively. When applying the dry heating technology for almond decontamination, the processing time needs to be determined based on initial aw of almonds regardless of storage condition or age of almonds within the current design frame.

Polymer Competitive Solvation Reduced Propylene Carbonate Cointercalation in a Graphitic Anode.

Polymer electrolytes have been studied as an alternative to organic liquid electrolytes but suffer from low ionic conductivity. Propylene carbonate (PC) proves to be an interesting solvent but is incompatible with graphitic anodes due to its cointercalation effect. In this work, adding poly(ethylene oxide) (PEO) into a PC-based electrolyte can alter the solvation structure as well as transform the solution into a polymer electrolyte with high ionic conductivity. By spectroscopic techniques and calculations, we demonstrate that PEO can compete with PC in solvating the Li+ ions, reducing the Li+-PC bond strength, and making it easier for PC to be desolvated. Due to the unique solvation structure, PC-cointercalation-induced graphite exfoliation is inhibited, and the reduction stability of the electrolyte is improved. This work will extend the applications of the PC-based electrolytes, deepen the understandings of the solvation structure, and spur designs of advanced electrolytes.