Real-time correlation of crystallization and segmental order in conjugated polymers.

Modulating the segmental order in the morphology of conjugated polymers is widely recognized as a crucial factor for achieving optimal electronic properties and mechanical deformability. However, it is worth noting that the segmental order is typically associated with the crystallization process, which can result in rigid and brittle long-range ordered crystalline domains. To precisely control the morphology, a comprehensive understanding of how highly anisotropic conjugated polymers form segmentally ordered structures with ongoing crystallization is essential, yet currently elusive. To fill this knowledge gap, we developed a novel approach with a combination of stage-type fast scanning calorimetry and micro-Raman spectroscopy to capture the series of specimens with a continuum in the polymer percent crystallinity and detect the segmental order in real-time. Through the investigation of conjugated polymers with different backbones and side-chain structures, we observed a generally existing phenomenon that the degree of segmental order saturates before the maximum crystallinity is achieved. This disparity allows the conjugated polymers to achieve good charge carrier mobility while retaining good segmental dynamic mobility through the tailored treatment. Moreover, the crystallization temperature to obtain optimal segmental order can be predicted based on Tg and Tm of conjugated polymers. This in-depth characterization study provides fundamental insights into the evolution of segmental order during crystallization, which can aid in designing and controlling the optoelectronic and mechanical properties of conjugated polymers.

Chain Dynamics of Partially Disentangled UHMWPE around Melting Point Characterized by 1H Low-Field Solid-State NMR.

Melts of ultrahigh molecular weight polyethylene (UHMWPE) entangled significantly, suffering processing difficulty. In this work, we prepared partially disentangled UHMWPE by freeze-extracting, exploring the corresponding enchantment of chain mobility. Fully refocused 1H free induction decay (FID) was used to capture the difference in chain segmental mobility during the melting of UHMWPE with different degrees of entanglement by low-field solid-state NMR. The longer the polyethylene (PE) chain is in a less-entangled state, the harder the process of merging into mobile parts after detaching from crystalline lamella during melting. 1H double quantum (DQ) NMR was further used to obtain information caused by residual dipolar interaction. Before melting, the DQ peak appeared earlier in intramolecular-nucleated PE than in intermolecular-nucleated PE because of the strong constraints of crystals in the former one. During melting, less-entangled UHMWPE could keep disentangled while less-entangled high density polyethylene (HDPE) could not. Unfortunately, no noticeable difference was found in DQ experiments between PE melts with different degrees of entanglement after melting. It was ascribed to the small contribution of entanglements compared with total residual dipolar interaction in melts. Overall, less-entangled UHMWPE could reserve its disentangled state around the melting point long enough to achieve a better way of processing.

Physical Aging Behavior of the Side Chain of a Conjugated Polymer PBTTT.

This paper provides a viewpoint of the technology of the fast-scanning calorimetry with the relaxation behavior of disordered side chains of poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-C12) around the glass transition temperature of the side chains (Tg,γ). PBTTT is an ideal model of the high-performance copolymer of poly(alkylthiophenes) with side chains. The γ1 relaxation process of the disordered side chains of PBTTT was detected as a small endothermic peak that emerges before the γ2 relaxation process. It shows an increase with increasing temperature as it approaches the glass transition temperature of the disordered side chains of PBTTT. The ductile-brittle transition of PBTTT in low temperatures originating from the thermal relaxation process is probed and illustrated by physical aging experiments. The signature is shown that the relaxation process of the disordered side chain of PBTTT at low temperatures varies from Arrhenius temperature dependence to super Arrhenius temperature dependence at high temperatures. These observations could have significant consequences for the stability of devices based on conjugated polymers, especially those utilized for stretchable or flexible applications, or those demanding mechanical robustness during tensile fabrication or use in a low-temperature environment.

The Influence of Thermal Treatments on Anchor Effect in NMT Products.

The anchor effect in nanomolding technology (NMT) refers to the effect that polymer nanorods in nanopores on metal surfaces act as anchors to firmly bond the outside polymer components onto the metal surface. In this work, the influences of thermal treatments on the anchor effect are studied at microscopic level from the perspective of interfacial interaction by a model system (poly(n-butyl methacrylate) (PBMA) and alumina nanopore composite). The differential scanning calorimeter and fluorescence results indicate that the formation of a dense polymer layer in close contact with the pore walls after proper thermal treatments is the key for a strong interfacial interaction. Such polymer layers were formed in NMT products composed of PBMA and aluminum after slow cooling or annealing, with an up to eighteen-fold improvement of the interfacial bonding strength. The polymer chains near the nanopore walls eliminate the thermal stress induced by the mismatch of thermal expansion coefficients through relaxation over time and remain in close proximity with the pore walls during the cooling process of nanomolding. The above dynamic behaviors of the polymer chains ensure the formation of stable interfacial interaction, and then lead to the formation of the anchor effect.

Open and Closed Layered Nanostructures with Sub-10 nm Periodicity Self-Assembled from Hydrophilic [60]Fullerene-Based Giant Surfactants.

Giant surfactants have been identified as good candidates to produce sub-10 nm elaborate nanostructures, which could potentially realize complex functions in nanofabrication fields. Our theoretical simulation demonstrates the formation of open layered (pupa-like micelles) and closed layered (onion-like micelles) nanostructures, self-assembled from giant surfactants with comparably sized hydrophilic heads tethered by oligomers in solution. Directed by these simulation results, we synthesized giant surfactants consisting of hydrophilic [60]fullerene heads and oligostyrene (OS7) tails and produced the predicted nanostructures with periods of 9.5, 8.3, and 7.5 nm, experimentally. Adjusting the polarity of the solvent and corresponding concentration changed the nanostructures from onion-like micelles with closed layers to pupa-like micelles with open layers. The different morphologies and periods were caused by solvent inclusion and the overlap of OS chains. The above layered nanostructures remained stable after annealing at 120 °C. This work provides insights that computer simulation can play an important role in assisting the design and construction of complicated nanostructures in giant surfactant systems.

Two-Dimensional Covalent Organic Frameworks with Enhanced Aluminum Storage Properties.

Aluminum-ion batteries (AIBs) are regarded as one of the most promising types of energy storage device in light of the safety, natural abundance, and electrochemical properties of aluminum. However, the rate capabilities of AIBs are limited owing to the sluggish kinetics of chloroaluminate anions. In this study, a covalent organic framework (COF) is adopted as the cathode material in AIBs. Theoretical and experimental results suggest that the COFs allow fast anion diffusion and intercalation without structure collapse, owing to the robust frameworks and the hierarchical pores with a large specific surface area of 1794 m2 g-1 . The resultant AIB exhibits remarkable long-term stability, with a reversible discharge capacity of 150 mAh g-1 after 13 000 cycles at 2 A g-1 . It also shows an excellent rate capability of 113 mAh g-1 at 5 A g-1 . This work fully demonstrates the potential of COFs in the storage of chloroaluminate anions and other large-sized ions.

Conjugated Carbon Cyclic Nanorings as Additives for Intrinsically Stretchable Semiconducting Polymers.

Molecular additives are often used to enhance dynamic motion of polymeric chains, which subsequently alter the functional and physical properties of polymers. However, controlling the chain dynamics of semiconducting polymer thin films and understanding the fundamental mechanisms of such changes is a new area of research. Here, cycloparaphenylenes (CPPs) are used as conjugated molecular additives to tune the dynamic behaviors of diketopyrrolopyrrole-based (DPP-based) semiconducting polymers. It is observed that the addition of CPPs results in significant improvement in the stretchability of the DPP-based polymers without adversely affecting their mobility, which arises from the enhanced polymer dynamic motion and reduced long-range crystalline order. The polymer films retain their fiber-like morphology and short-range ordered aggregates, which leads to high mobility. Fully stretchable transistors are subsequently fabricated using CPP/semiconductor composites as active layers. These composites are observed to maintain high mobilities when strained and after repeated applied strains. Interestingly, CPPs are also observed to improve the contact resistance and charge transport of the fully stretchable transistors. ln summary, these results collectively indicate that controlling the dynamic motion of polymer semiconductors is proved to be an effective way to improve their stretchability.

Conformational Transitions of Polymer Chains in Solutions Characterized by Fluorescence Resonance Energy Transfer.

The critical overlap concentration C* is an important concept in polymer solutions and is defined as the boundary between dilute and semidilute regimes. In this study, the chain conformational changes of polystyrene (PS) with both high (Mn = 200,000 Da) and low (Mn = 13,000 Da) molecular weights in cis-decalin were compared by intrachain fluorescence resonance energy transfer (FRET). The random labeling of donor and acceptor chromophores strategy was employed for long PS chains, whereas chain-end labeling was used for short PS chains. By monitoring the spectroscopic intensity ratio between acceptor and donor, the concentration dependence on chain conformation from dilute to semidilute solutions was determined. Both long and short chains exhibit a conformational transition concentration, above which the polymer chains begin to collapse with concentration significantly. Interestingly, for randomly labeled polymer long chains, such concentration is consistent with C* determined from the viscosity result, below which only slight conformational change of polymer chain takes place. However, for the chain-end labeled short chain, the conformational transition concentration takes place earlier than C*, below which no significant polymer conformation change is observed.

Nanostructures and Dynamics of Isochorically Confined Amorphous Drug Mediated by Cooling Rate, Interfacial, and Intermolecular Interactions.

The production and stabilization of amorphous drugs by the nanoconfinement effect has recently become a research hotspot in pharmaceutical sciences. Herein, two guest/host systems, indomethacin (IMC) and griseofulvin (GSF) confined in anodic aluminum oxide (AAO) templates with different pore diameters (25-250 nm) are investigated by differential scanning calorimetry (DSC) and broadband dielectric spectroscopy (BDS). The crystallization of the confined drugs is suppressed, and their glass transition temperatures show an evident pore-size dependency. Moreover, a combination of dielectric and calorimetric results demonstrates that the significant change in the temperature dependence of the structural relaxation time during the cooling process is attributed to the vitrification of the interfacial molecules and the local density heterogeneity under isochoric confinement. Interestingly, compared with the case of IMC/AAO, which can be described by a typical two-layer model, GSF/AAO presents an rare scenario of three glass transition temperatures under fast cooling (40-10 K/min), indicating that there exists a thermodynamic nonequilibrium interlayer between the bulk-like core and interfacial layer. In contrast, the slow cooling process (0.5 K/min) would lead confined GSF into the stable core-shell nanostructure. Using surface modification, the interfacial effect is confirmed to be an important reason for the different phenomena between these two guest/host systems, and intermolecular hydrogen bonding is also suggested to be emphasized considering the long-range effect of interfacial interactions. Our results not only provide insight into the glass transition behavior of geometrically confined supercooled liquids, but also offer a means of adjusting and stabilizing the nanostructure of amorphous drugs under two-dimensional confinement.

How thermal stress alters the confinement of polymers vitrificated in nanopores.

Understanding and controlling the glass transition temperature (Tg) and dynamics of polymers in confined geometries are of significance in both academia and industry. Here, we investigate how the thermal stress induced by a mismatch in the coefficient of thermal expansion affects the Tg behavior of polystyrene (PS) nanorods located inside cylindrical alumina nanopores. The size effects and molecular weight dependence of the Tg are also studied. A multi-step relaxation process was employed to study the relationship between thermal stress and cooling rate. At fast cooling rates, the imparted thermal stress would overcome the yield stress of PS and peel chains off the pore walls, while at slow cooling rates, chains are kept in contact with the pore walls due to timely dissipation of the produced thermal stress during vitrification. In smaller nanopores, more PS chains closely contact with pore walls, then stronger internal thermal stress would be generated between core and shell of PS nanorod, which results in a larger deviation between two Tgs. The core part of PS shows lower Tg than bulk value, which can induce faster dynamics in the center region. A complex and important role stress plays is supposed in complex confinement condition, e.g., in nanopores, during vitrification.

Supramolecular Gel-Templated In Situ Synthesis and Assembly of CdS Quantum Dots Gels.

Although many studies have attempted to develop strategies for spontaneously organizing nanoparticles (NPs) into three-dimensional (3D) geometries, it remains a fascinating challenge. In this study, a method for in situ synthesis and self-assembly of a CdS quantum dots (QDs) gel using a Cd supramolecular gel as a scaffold was demonstrated. During the QDs formation process, the Cd ions that constituted the Cd gels served as the precursors of the CdS QDs, and the oleic acid (OA) that ligated with the Cd in the supramolecular gels was capped on the surface of the CdS QDs in the form of carboxylate. The OA-stabilized CdS QDs were in situ synthesized in the entangled self-assembled fibrillar networks (SAFIN) of the Cd gels through reactions between the gelator and H2S. As a result, the QDs exactly replicated the framework of the SAFIN in the CdS QD gels instead of simply assembling along the SAFIN of the supramolecular gels. Moreover, the CdS QDs showed extraordinary sensitivity in the fluorescence detection of IO4- anions. The facile one-step method developed here is a new approach to assembling nanostructured materials into 3D architectures and has general implications for the design of low molecular mass gelators to bring desired functionality to the developed supramolecular gels.

Highly stretchable polymer semiconductor films through the nanoconfinement effect.

Soft and conformable wearable electronics require stretchable semiconductors, but existing ones typically sacrifice charge transport mobility to achieve stretchability. We explore a concept based on the nanoconfinement of polymers to substantially improve the stretchability of polymer semiconductors, without affecting charge transport mobility. The increased polymer chain dynamics under nanoconfinement significantly reduces the modulus of the conjugated polymer and largely delays the onset of crack formation under strain. As a result, our fabricated semiconducting film can be stretched up to 100% strain without affecting mobility, retaining values comparable to that of amorphous silicon. The fully stretchable transistors exhibit high biaxial stretchability with minimal change in on current even when poked with a sharp object. We demonstrate a skinlike finger-wearable driver for a light-emitting diode.

Synthesis of Site-Specific Dye-Labeled Polymer via Atom Transfer Radical Polymerization (ATRP) for Quantitative Characterization of the Well-Defined Interchain Distance.

Novel difunctional initiators that incorporate Förster/fluorescence resonance energy transfer (FRET) pairs are generated to carry out atom transfer radical polymerization of styrene, methyl methacrylate, and n-butyl methacrylate monomers by an efficient manner. Based on the chemical structures of the initiators, the locations of the fluorophore moiety are dictated to be in the center of the chain with accurately quantified chain functionality (>90% labeling ratio). The site-specific integration of FRET dyes into separate polymer chain centers allows for characterization of the well-defined interchain distance quantitatively based on the response between these fluorescent probes. The reliability of this technique is verified in bulk state, which is in well agreement with the theoretical ones. This well-defined FRET system is expected to be a promising candidate to provide a distinct physical image at a microscopic level regarding scaling chain dimension, chain interpenetration, and polymer compatibility.

Effect of geometric curvature on vitrification behavior for polymer nanotubes confined in anodic aluminum oxide templates.

The glass transition behavior of polystyrene (PS) nanotubes confined in cylindrical alumina nanopores was studied as a function of pore diameter (d) and polymer tube thickness (δ). Both the calorimetric glass transition temperature and the microstructure measured by a nonradiative energy transfer method indicated that the polymer nanotube, or concave polymer thin film, exhibited significant differences in vitrification behavior compared to the planar one. A closer interchain proximity and an increased T_{g} were observed for polymer nanotubes with respect to the bulk polymer. T_{g} for polymer nanotubes was primarily dependent on the curvature radius d of the template, while it was less dependent on the thickness δ of the PS tube wall in the range of 11-23 nm. For small nanotubes (d=55nm), the T_{g} increased as high as 18 °C above the bulk value. This vitrified property reverted back to the bulk value when the substrate was chemically removed, which indicated the crucial importance of the interfacial effect imposed by the hard wall with a concave geometry.

Glass transitions of poly(methyl methacrylate) confined in nanopores: conversion of three- and two-layer models.

The glass transitions of poly(methyl methacrylate) (PMMA) oligomer confined in alumina nanopores with diameters much larger than the polymer chain dimension were investigated. Compared with the case of 80 nm nanopores, PMMA oligomer confined in 300 nm nanopores shows three glass transition temperatures (from from low to high, denoted as Tg,lo, Tg,inter, and Tg,hi). Such phenomenon can be interpreted by a three-layer model: there exists an interphase between the adsorbed layer and core volume called the interlayer, which has an intermediate Tg. The behavior of multi-Tg parameters is ascribed to the propagation of the interfacial interaction during vitrifaction process. Besides, because of the nonequilibrium effect in the adsorbed layer, the cooling rate plays an important role in the glass transitions: the fast cooling rate generates a single Tg; the intermediate cooling rate induces three Tg values, while the ultraslow cooling rate results in two Tg values. With decreasing the cooling rate, the thickness of interlayer would continually decrease, while those of the adsorbed layer and core volume gradually increase; meanwhile, the Tg,lo gradually increases, Tg,inter almost stays constant, and the Tg,hi value keeps decreasing. In such a process, the dynamic exchanges between the interlayer and adsorbed layer, core volume should be dominant.

Programming macro-materials from DNA-directed self-assembly.

DNA is a powerful tool that can be attached to nano- and micro-objects and direct the self-assembly through base pairing. Since the strategy of DNA programmable nanoparticle self-assembly was first introduced in 1996, it has remained challenging to use DNA to make powerful diagnostic tools and to make designed materials with novel properties and highly ordered crystal structures. In this review, we summarize recent experimental and theoretical developments of DNA-programmable self-assembly into three-dimensional (3D) materials. Various types of aggregates and 3D crystal structures obtained from an experimental DNA-driven assembly are introduced. Furthermore, theoretical calculations and simulations for DNA-mediated assembly systems are described and we highlight some typical theoretical models for Monte Carlo and Molecular Dynamics simulations.

Understanding polymorphism in organic semiconductor thin films through nanoconfinement.

Understanding crystal polymorphism is a long-standing challenge relevant to many fields, such as pharmaceuticals, organic semiconductors, pigments, food, and explosives. Controlling polymorphism of organic semiconductors (OSCs) in thin films is particularly important given that such films form the active layer in most organic electronics devices and that dramatic changes in the electronic properties can be induced even by small changes in the molecular packing. However, there are very few polymorphic OSCs for which the structure-property relationships have been elucidated so far. The major challenges lie in the transient nature of metastable forms and the preparation of phase-pure, highly crystalline thin films for resolving the crystal structures and evaluating the charge transport properties. Here we demonstrate that the nanoconfinement effect combined with the flow-enhanced crystal engineering technique is a powerful and likely material-agnostic method to identify existing polymorphs in OSC materials and to prepare the individual pure forms in thin films at ambient conditions. With this method we prepared high quality crystal polymorphs and resolved crystal structures of 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene), including a new polymorph discovered via in situ grazing incidence X-ray diffraction and confirmed by molecular mechanic simulations. We further correlated molecular packing with charge transport properties using quantum chemical calculations and charge carrier mobility measurements. In addition, we applied our methodology to a [1]benzothieno[3,2-b][1]1benzothiophene (BTBT) derivative and successfully stabilized its metastable form.

Integration of ultrafast scanning calorimetry with micro-Raman spectroscopy for investigation of metastable materials.

A stage-type ultrafast scanning calorimetry (ST-UFSC) with controlled heating and cooling rates up to 10(5) K s(-1) was designed to integrate with microstructural characterization. This enables us to precisely control the evolution of fast transitional states of metastable samples provided by the UFSC platform, and to follow subtle structural changes between intermediate stages. As an example, we collected the Raman spectra of poly(ethylene terephthalate) quenched at different crystallization states obtained by programed rapid cooling and heating processes. Because of the very small sample mass for UFSC measurements, from minimum few nanograms to sub-micrograms, the sample's temperature is very sensitive to the perturbation from the laser illumination of the Raman spectrometer. Real time temperature monitoring and compensation was accompanied during the whole process of in situ spectroscopy. The results showed a good agreement of crystallization kinetics obtained from the Raman spectroscopy and from the calorimetric melting enthalpy, given that the sample temperature is well controlled during spectroscopic measurements and that the heating rate for calorimetry is fast enough to suppress structural reorganization during heating scans. We expect that the ST-UFSC is suitable to be integrated with other micro-analysis techniques to investigate the structure and dynamics of metastable states obtained by fast thermal treatments.

Complex microstructures of ABC triblock copolymer thin films directed by polymer brushes based on self-consistent field theory.

The morphology and the phase diagram of ABC triblock copolymer thin film directed by polymer brushes are investigated by the self-consistent field theory in three dimensions. The polymer brushes coated on the substrate can be used as a good soft template to tailor the morphology of the block copolymer thin films compared with those on the hard substrates. The polymer brush is identical with the middle block B. By continuously changing the composition of the block copolymer, the phase diagrams are constructed for three cases with the fixed film thickness and the brush density: identical interaction parameters, frustrated and non-frustrated cases. Some ordered complex morphologies are observed: parallel lamellar phase with hexagonally packed pores at surfaces (LAM3 (ll) -HFs), perpendicular lamellar phase with cylinders at the interface (LAM(⊥)-CI), and perpendicular hexagonally packed cylinders phase with rings at the interface (C2 (⊥)-RI). A desired direction (perpendicular or parallel to the coated surfaces) of lamellar phases or cylindrical phases can be obtained by varying the composition and the interactions between different blocks. The phase diagram of ABC triblock copolymer thin film wetted between the polymer brush-coated surfaces is very useful in designing the directed pattern of ABC triblock copolymer thin film.