ABSTRACT
A rapid and highly selective naked-eye detection of hydrochloric acid (HCl) in an aqueous medium was established using HCl-triggered redispersion of gold nanoparticle aggregates.
ABSTRACT
Non-photosynthetic chemoautotrophic microorganisms in deep-sea hydrothermal vent can obtain energy by oxidation reducing substances and synthesize CO2 into organic carbon, and the development and utilization of microbial resources in this environment for CO2 fixation under ordinary environmental conditions is of great significance to understand the carbon cycle and microbial carbon fixation in deep-sea hydrothermal vent. In this study, a set of spiral-stirred bioreactor (SSB) was developed to cultivate a group of non-photosynthetic chemoautotrophic CO2 assimilation microorganisms (NPCAM), mainly Sphingomonadaceae (unclassified, the mean of which was 31.16 %), from deep-sea hydrothermal vent sediments, which have the characteristics of halophilic, acid-base and heavy metal resistant. The maximum carbon fixation efficiency (calculated by CO2) was 6.209 mg·CO2/(L·h) after 96 h of incubation in the presence of mixed electron donors (MEDs, 0.46 % NaNO2, 0.50 % Na2S2O3 and 1.25 % Na2S, w/v), mixed inorganic carbon sources (CO2, Na2CO3 and NaHCO3) and aerobic conditions. The detection of NPCAM synthetic organic fraction in SSB system, the study of single bacteria culturability and carbon fixation efficiency, the analysis of CO2 fixation pathway and the development of coupled carbon fixation technology are the prospective works that need to be further developed.
Subject(s)
Carbon Dioxide , Hydrothermal Vents , Carbon Dioxide/metabolism , Hydrothermal Vents/microbiology , Prospective Studies , Carbon/metabolism , Carbon CycleABSTRACT
Sulfonated hyaluronic acid (S-HA) has been shown to promote endothelialization in the treatment of cardiovascular diseases according to amounts of investigations. In this study, two kinds of S-HA with higher sulfur content were obtained successfully. Through a series of cell experiments, it was found that the S-HA with higher sulfur content not only possessed stronger ability of promoting the growth and migration of endothelial cells, regulating the phenotype of smooth muscle cells, but also had stronger anti-inflammatory function. Furthermore, all the S-HA molecules are very compatible with blood.
Subject(s)
Cardiovascular Diseases , Cardiovascular System , Humans , Hyaluronic Acid , Endothelial Cells , SulfurABSTRACT
As the reserves of high-quality coal resources in China are decreasing, it is imperative to improve the processing and comprehensive utilization of low-rank coal. In this study, NaNO2 was used for the flotation pretreatment test of the low-rank coal obtained from Majialiang, and the mechanism was discussed by contact angle analysis, zeta potential measurements, and XPS peak fitting analysis. The results showed that when the dosage of NaNO2 was 2000 g/t and the pretreatment time was 5 min, the flotation effect was the best, the ash contents of concentrate ash and tailings and the combustible recovery were 17.15, 37.12, and 42.23%, respectively; the combustible recovery increased by 12%. The contact angle, surface functional group content, and zeta potential measurements showed that with the change of NaNO2 dosage, the content of the hydrophobic functional group and the zeta potential value were consistent with the change of combustible recovery. The increase of hydrophobic functional groups can effectively enhance the hydrophobic interaction on the surface of the coal, which is conducive to the combination of collector and coal, and improve the efficiency of the collector. The NaNO2 pretreatment test can promote flotation efficiency, and the addition of reductant is an effective method for the flotation efficiency of low-rank coal in reducing oxygen-containing functional groups on the surface of low-rank coal to improve the poor floatability. In this study, the method of chemical pretreatment is put forward to provide a new idea for slime flotation.
ABSTRACT
The artificial photocatalytic degradation of organic pollutants has emerged as a promising approach to purifying the water environment. The core issue of this ongoing research is to construct efficient but easily recyclable photocatalysts without quadratic harm. Here, we report an eco-friendly photocatalyst with in situ generated TiO2 quantum dots (TQDs) on natural cotton cellulose (CC) by a simple one-step hydrothermal method. The porous fine structure and abundant hydroxyl groups control the shape growth and improve the stability of nanoparticles, making natural CC suitable for TQDs. The TQDs/CC photocatalyst was synthesized without the chemical modification of the TQDs. FE-SEM and TEM results showed that 5-6 nm TQDs are uniformly decorated on the CC surface. The long-term stability in photocatalytic activity and structure of more than ten cycles directly demonstrates the stability of CC on TQDs. With larger CC sizes, TQDs are easier to recycle. The TQDs/CC photocatalysts show impressive potential in the photocatalytic degradation of anionic methyl orange (MO) dyes and cationic rhodamine B (RhB) dyes.
ABSTRACT
Coal gasification fine slag is a kind of solid waste with low resource utilization rate. The complex embedding of residual carbon and inorganic minerals (ash materials) is the main reason restricting the efficient resource separation and utilization of residual carbon or ash materials. Hydrophobic-hydrophilic separation (HHS) is a separation technology in which mineral particles with different surface hydrophobicity values are enriched in the water phase and oil phase under the action of mechanical stirring. The water on the surface of hydrophobic particles is replaced by the oil phase to form flocs, which are enriched in the hydrophobic liquid phase, while hydrophilic particles are dispersed into the aqueous phase. In this study, the HHS process was used to separate the carbon/ash from the fine gasification slag produced by a Shenning gasifier, Texaco gasifier, and GSP gasifier of Ningxia Coal Industry Co., Ltd. The physicochemical properties of the original sample and the residual carbon products obtained by hydrophobic-hydrophilic separation were analyzed. The results show that HHS can separate the carbon/ash in the three kinds of fine slag to varying degrees. The carbon element is enriched into the hydrophobic phase to form the concentrates, while the silicon element, oxygen element, and metal element enter the tailings. The spherical ash with different particle sizes distributed on the surface of residual carbon and the gap of the matrix is basically removed, while the ash in the carbon-ash melt is difficult to remove. The ash contents of the concentrate and tailings of fine slag of the Shenning gasifier are 22.58 and 96.28%, respectively, which reach the best ash index compared with that of the other two gasifiers. From the change of mineral surface properties after HHS, the distribution of oxygen-containing groups, benzene rings, Si-O, and clay minerals or carbonate minerals in the three kinds of fine slag residual carbon products is basically similar. Compared with the other two gasifier products, the GSP gasifier concentrate has a larger specific surface area and less ash material, more amorphous carbon structures (less graphitic), and more active sites, resulting in a stronger combustion activity.
ABSTRACT
The electrochemical oxygen evolution reaction (OER) is an essential anodic reaction that converts sustainable energy into chemical fuels, as it can provide protons and electrons. One of the most challenging research directions for the practical application of the OER is the elevation of the activity of noble-metal-free electrocatalysts. Here, we report that the nickel foam can be used as an electron-deficient substrate to tune the surface oxidation state of catalytic electrodes and thus boost the OER activity of CuP2 nanosheets via a charge-storage mechanism. The as-obtained self-standing CuP2/Ni electrodes delivered a current density of 220 mA cm-2 at 370 mV overpotential, which is approximately 5.5 times higher than the benchmarked IrO2 on nickel foam. This work sheds some new light on the design of low-cost electrocatalysts or electrodes with high activity for the electrochemical OER.
ABSTRACT
Ratiometric electrochemical assays have been demonstrated to be more sensitive and selective in various sensing events, mainly due to their affordable built-in correction and good self-reference capability. But it is known that complicated modification and labeling operations usually are necessary for the construction of ratiometric electrochemical assays, therefore is a hot and important issue needing consideration carefully. We herein report a new yet simple bare electrode-based ratiometric electrochemical bioassay to achieve sensitive and selective analysis of alkaline phosphatase (ALP), using a liquid phase system that contains CoOOH nanozymes and commercially available indicator substrate. This proposed bioassay works based on the ratiometric change of dual electrochemical signals, arising from an exclusive target ALP-triggered hydrolysis of electrochemical substrate p-nitrophenyl phosphate (PNPP). In this design, the two hydrolyzed products of electrochemically active p-nitrophenol (PNP) and electrochemically inactive phosphate anion (PO43-) are responsible together for the ratiometric electrochemical analysis of ALP. PNP exhibits a straightforward current response toward ALP content; however, PO43- cannot show a direct electrochemical signal thus is rationally designed to offer an alternative response by linking it with the specific CoOOH nanozyme-catalyzed reaction of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2, in which the nanozyme-catalyzed product oxTMB shows a direct reduction current at the GCE, and significantly decreases with increasing PO43- species due to the good inhibition of PO43- toward CoOOH nanozyme activity. As a result, a ratiometric electrochemical strategy for ALP analysis with a low limit of detection of 0.366 U/L (S/N = 3) was successfully achieved by integrating the above direct and indirect dual electrochemical responses. This developed bioassay can allow the quantitative diagnosis of ALP activity especially with a label-free and modification-free merit, therefore paving the way for simple, convenient, and portable electroanalytical tools in biosensing design and application.
Subject(s)
Alkaline Phosphatase , Hydrogen Peroxide , Alkaline Phosphatase/analysis , ElectrodesABSTRACT
As a new low-cost photothermal nanoprobe, Prussian blue nanoparticles (PB NPs) have been demonstrated to have more potential in photothermometric-based point-of-care testing (POCT) application. However, most of the existing PB NP-based photothermometric sensors were constructed mainly relying on in situ generation of PB NPs or their combination with antigens and antibodies, therefore usually suffering from the inherent defects like complicated preparation and cumbersome surface process as well as high-cost modification. To break this limitation of PB NP-based photothermometric POCT, we proposed an ingenious redox reaction-controlled nanoprobe conversion strategy and successfully applied to photothermometric detection of ascorbate oxidase (AAO). In this design, the heat of PB NP photothermal system under 808-nm laser irradiation dramatically decreased with the addition of AA, due to a unique AA-induced Prussian blue to Prussian white (PB-to-PW) conversion. Upon AAO addition, the heat of reaction system increased because of the enzymatic catalytic reaction between AAO and AA, which led to a significant reduction of AA and resultantly inhibited PB-to-PW conversion. Such target-mediated nanoprobe conversion resulted in an obvious temperature change that could be easily detected by a common thermometer and exhibited good linear ranges from 0.25 to 14 mU/mL with a detection limit as low as 0.21 mU/mL for POCT analysis of AAO. This facile, convenient, and portable photothermometric sensing platform provides an innovative route for the design of PB NP nanoprobe-based photothermometric detection methods. A sensitive photothermometric AAO sensor based on a redox reaction-controlled nanoprobe conversion strategy from Prussian blue to Prussian white.
Subject(s)
Ascorbate Oxidase/analysis , Biosensing Techniques/methods , Coloring Agents/chemistry , Ferrocyanides/chemistry , Animals , Enzyme Assays/methods , Humans , Nanoparticles/chemistry , Oxidation-ReductionABSTRACT
Platinum (Pt) is the most effective bench-marked catalyst for producing renewable and clean hydrogen energy by electrochemical water splitting. There is demand for high HER catalytic activity to achieve efficient utilization and minimize the loading of Pt in catalysts. In this work, we significantly boost the HER mass activity of Pt nanoparticles in Ptx /Co to 8.3 times higher than that of commercial Pt/C by using Co/NC heterojunctions as a heterogeneous version of electron donors. The highly coupled interfaces between Co/NC and Pt metal enrich the electron density of Pt nanoparticles to facilitate the adsorption of H+ , the dissociation of Pt-H bonds and H2 release, giving the lowest HER overpotential of 6.9â mV vs. RHE at 10â mA cm-2 in acid among reported HER electrocatalysts. Given the easy scale-up synthesis due to the stabilization of ultrafine Pt nanoparticles by Co/NC solid ligands, Ptx /Co can even be a promising substitute for commercial Pt/C for practical applications.
ABSTRACT
A new signal-amplified photothermometric sensor of Ag+ was explored based on a simple yet effective integration of inorganic and organic photothermal probes, mainly depending on the successful exploitation of a dual-signal transduction channel originating from the inherent photothermal property and the peroxidase-like activity of Prussian blue nanocubes (PB NCs).
ABSTRACT
NOx - reduction acts a pivotal part in sustaining globally balanced nitrogen cycle and restoring ecological environment, ammonia (NH3 ) is an excellent energy carrier and the most valuable product among all the products of NOx - reduction reaction, the selectivity of which is far from satisfaction due to the intrinsic complexity of multiple-electron NOx - -to-NH3 process. Here, we utilize the Schottky barrier-induced surface electric field, by the construction of high density of electron-deficient Ni nanoparticles inside nitrogen-rich carbons, to facilitate the enrichment and fixation of all NOx - anions on the electrode surface, including NO3 - and NO2 - , and thus ensure the final selectivity to NH3 . Both theoretical and experimental results demonstrate that NOx - anions were continuously captured by the electrode with largely enhanced surface electric field, providing excellent Faradaic efficiency of 99 % from both electrocatalytic NO3 - and NO2 - reduction. Remarkably, the NH3 yield rate could reach the maximum of 25.1â mg h-1 cm-2 in electrocatalytic NO2 - reduction reaction, outperforming the maximum in the literature by a factor of 6.3 in neutral solution. With the universality of our electrocatalyst, all sorts of available electrolytes containing NOx - pollutants, including seawater or wastewater, could be directly used for ammonia production in potential through sustainable electrochemical technology.
ABSTRACT
The activation of C-H bonds is a central challenge in organic chemistry and usually a key step for the retro-synthesis of functional natural products due to the high chemical stability of C-H bonds. Electrochemical methods are a powerful alternative for C-H activation, but this approach usually requires high overpotential and homogeneous mediators. Here, we design electron-deficient W2C nanocrystal-based electrodes to boost the heterogeneous activation of C-H bonds under mild conditions via an additive-free, purely heterogeneous electrocatalytic strategy. The electron density of W2C nanocrystals is tuned by constructing Schottky heterojunctions with nitrogen-doped carbon support to facilitate the preadsorption and activation of benzylic C-H bonds of ethylbenzene on the W2C surface, enabling a high turnover frequency (18.8 h-1) at a comparably low work potential (2 V versus SCE). The pronounced electron deficiency of the W2C nanocatalysts substantially facilitates the direct deprotonation process to ensure electrode durability without self-oxidation. The efficient oxidation process also boosts the balancing hydrogen production from as-formed protons on the cathode by a factor of 10 compared to an inert reference electrode. The whole process meets the requirements of atomic economy and electric energy utilization in terms of sustainable chemical synthesis.
ABSTRACT
Two fluorescent signal indicators were simply converted from one organic precursor system by using the superior oxidation capability of manganese dioxide (MnO2) nanosheets for the first time, finally resulting in the successful fabrication of a ratio fluorometric bioassay of alkaline phosphatase (ALP).
ABSTRACT
The development of nanozyme-based photothermometric sensing for point-of-care testing (POCT) heavy metal ions is of great significance for disease diagnosis and health management. Considering the low catalytic activity of most nanozymes at physiological pH, we found bismuth ions (Bi3+) could effectively enhance the peroxidase (POX)-like activity of cetyltrimethylammonium bromide and citrate-capped octahedral gold nanoparticle (CTAB/Cit-AuNP) nanozymes. It is mainly based on Bi3+ ions being able to trigger the surface cleaning effect of CTAB/Cit-AuNPs. Because the more active Bi3+ ions could effectively bind with citrate on the gold surface and competitively destroy the electrostatic interaction between citrate and CTAB, resulting in the removal of CTAB ligands from the gold surface. Without the ligand protection, CTAB/Cit-AuNPs aggregated immediately, and further resulted in a significant activation of the POX-like activity of AuNP nanozymes. Based on this principle, we introduced the enzyme substrate 3,3',5,5'-tetramethylbenzidine (TMB) into this aggregation-induced nanozyme system, and rationally designed a photothermometric platform to quickly and sensitively detect Bi3+ ions by using the good photothermal effect of the oxidation product of TMB (oxTMB). The developed photothermometric method only using a common thermometer has a limit of detection (LOD) as low as 45.7 nM for POCT analysis of Bi3+ ions. This study not only provides a more accurate understanding of the aggregation-induced nanozymes based on the surface cleaning principle, but also shows the potential applications of aggregation-induced nanozymes in the POCT field.
ABSTRACT
Fenton-like reaction systems have been proven to be efficient as powerful promoters in advanced oxidation processes (AOPs) due to their generated reactive oxygen species (ROS), such as ËOH and ËO2-, which can further oxidize a specific chromogenic substrate like 3,3',5,5'-tetramethylbenzidine (TMB) to generate sensitive color readout and thereby demonstrate more potential in the colorimetric analysis field. However, the inherent drawback of the low rate-limiting step of Fe3+/Fe2+ conversion in the Fenton-like reaction and its resultant inefficiency for H2O2 decomposition hinder its practical applications. We herein communicate an analyte-activated catfish effect based catalysis strategy to promote the Fenton-like reaction, in which dopamine, like a catfish, was added to activate the Fenton-like reaction. By definition, the conversion rate of Fe3+ to Fe2+ in the proposed Fenton-like reaction can be significantly accelerated through a specific DA-mediated electron transfer process which further promotes the reaction activity in the Fenton-like reaction to generate more ËOH and ËO2- radicals. As a result, the produced ËOH and ËO2- radicals in such a reaction system can significantly oxidize TMB indicator into its oxidation product (TMBox) and therefore indicate the corresponding target-dependent color and photothermal signal readout, enabling the successful fabrication of a more sensitive and stable colorimetric and photothermometric DA sensor. More significantly, this strategy can greatly advance the practical application of Fenton-like reactions in the fields of colorimetric and photothermometric bioassays.
Subject(s)
Catfishes , Colorimetry , Animals , Biological Assay , Dopamine , Hydrogen Peroxide , Oxidation-ReductionABSTRACT
A novel Hg2+-responsive thermometer system for translating mercury detection into temperature monitoring was developed based on an aggregation-activated oxidase-like activity of gold nanoparticles.
Subject(s)
Gold/chemistry , Mercury/analysis , Metal Nanoparticles/chemistry , Spectrophotometry/methods , Benzidines/chemistry , Ions/chemistry , Light , Limit of Detection , Oxidoreductases/chemistry , Oxidoreductases/metabolism , Temperature , beta-Cyclodextrins/chemistryABSTRACT
Advanced oxidation processes (AOPs) have recently proposed for advancing colorimetric sensing applications, owing to their excellent performance of sensitive color readout that generated from the oxidation of chromogenic substrates like 3,3',5,5'-tetramethylbenzidine (TMB) by reactive oxygen species (ROS) of AOPs such as ·OH and ·O2- radicals. However, the efficiency of ROS generation and the related H2O2 decomposition in most AOPs is quite low especially at neutral pH, which greatly hampered the practical sensing applications of the AOPs. We herein communicated that ß-cyclodextrin (ß-CD)-capped gold nanoparticles (ß-CD@AuNPs) can promote catalysis at neutral pH for AOP as an excellent co-catalyst. In this strategy, inorganic pyrophosphate (PPi) ions was first used to coordinate with Cu2+ and form Cu2+-PPi complex. In the presence of hydrogen peroxide, target inorganic pyrophosphatase (PPase) can hydrolyze PPi into inorganic phosphate (Pi) and release free Cu2+ simultaneously, resulting in a Cu2+-triggered Fenton-like AOP reaction. The introduced ß-CD@AuNPs acts as a co-catalyst, analogous to mediators in the most co-catalyzed system, to enhance the rate-limiting step of Cu2+/Cu+ conversion in Cu2+/H2O2 Fenton-like AOP and resulting in an efficient generation of ·OH and ·O2- radicals, which further producing an intense blue color by oxidizing TMB into its oxidation product (TMBox) within a short time. Finally, this reaction system was used to simply detecting target PPase with the colorimetric and photothermal readout based on the in-situ generated TMBox indicator. More significantly, we successfully demonstrated nanozyme can serve as a co-catalyst to promote the AOP catalysis at neutral pH, and inspire other strategies to overcome the pH limitation in the AOP catalysis and expand its colorimetric and photothermometric application.
Subject(s)
Colorimetry/methods , Inorganic Pyrophosphatase/blood , Metal Nanoparticles/chemistry , Benzidines/chemistry , Catalysis , Chromogenic Compounds/chemistry , Copper/chemistry , Enzyme Inhibitors/analysis , Enzyme Inhibitors/chemistry , Gold/chemistry , Gold/radiation effects , Humans , Hydrogen Peroxide/chemistry , Inorganic Pyrophosphatase/antagonists & inhibitors , Inorganic Pyrophosphatase/chemistry , Light , Limit of Detection , Metal Nanoparticles/radiation effects , Oxidation-Reduction , Reproducibility of Results , Sodium Fluoride/analysis , Sodium Fluoride/chemistry , beta-Cyclodextrins/chemistryABSTRACT
Iron ions play a key role in many physiological processes, which can provide feedback for the evaluation of biological systems and environmental processes. New strategies for portable determination of Fe3+ therefore are still in urgent need. Here, through an in situ generation of prussian blue nanoparticles (PB NPs) in aqueous solution, we developed a bimodal method for photothermal and colorimetric detection of Fe3+. The sensing mechanism is based on the effective oxidation etching of Au-Cu core-shell nanocubes induced by Fe3+, accompanied by the in situ generation of PB NPs. It can be attributed to the specific reaction between ferrous ions (Fe2+) from the reduction of Fe3+ and potassium ferricyanide (K3[Fe(CN)6]) in the reaction solution. The in situ produced PB NPs show distinct bare-eye-detectable readouts with highly sensitive colorimetric and photothermal responses and thus can be used for Fe3+ determination. Such colorimetric change signals of characteristic absorbance at 740 nm in the UV-vis spectra showed a sensitive response to Fe3+ with a LOD of 210 nM. Moreover, as a sensitive photothermal probe, PB NPs generated in our Fe3+-enabled reaction system also exhibited a sensitive response to Fe3+ with a LOD of 70 nM. In addition, the standard addition experiments demonstrate our photothermal and colorimetric probe has good applicability for Fe3+ detection in the river water sample. What's more, the proposed strategy opens a new horizon for affordable detection of metal ions using a common thermometer, and therefore has a great potential for analytical chemistry and some important applications such as environmental monitoring, disease diagnostics and food analysis.
Subject(s)
Colorimetry , Ferrocyanides/analysis , Nanoparticles/analysis , Temperature , Water Pollutants, Chemical/analysis , Ions/analysis , Particle Size , Photochemical Processes , Surface PropertiesABSTRACT
New methods for portable detection of arsenate are still in urgent need. Herein, we explored a simple but sensitive thermometric strategy for arsenate determination without complex instruments and skilled technicians. Cobalt oxyhydroxide (CoOOH) nanoflakes, can ingeniously decompose hydrogen peroxide into oxygen in a sealed reaction vessel, accompanied by marked pressure and significant temperature increase due to the exothermic reaction effect (ΔH = -98.2 kJ/mol). The increased pressure then compelled a certain amount of H2O overflowing from the drainage device into another vessel, leading to a significant temperature decrease due to the preloaded ammonium nitrate (NH4NO3) and its good dissolution endothermic effect (ΔH = 25.4 kJ/mol). In the presence of arsenate, the catalytic activity of CoOOH nanoflakes for H2O2 decomposition was inhibited dramatically, resulting in an obvious decrease of the pressure, weighting water and temperature response. The two temperature responses with increasing and decreasing feature were easily measured through a common thermometer, and exhibited an effective signaling amplification via coupling both "signal-on" and "signal-off" temperature readout elements. The obtained dual superimposing temperature readout exhibits a good linear with the concentration of arsenate with a lower detection limit (51 nM, 3.8 ppb). Compared to the inductively coupled plasma mass spectrometry, this enhanced thermometric strategy provides a simple, rapid, convenient, low cost, and portable platform for sensing arsenate in real environmental water.