Correction: Luminescent columnar discotics as highly efficient emitters in pure deep-blue OLEDs with an external quantum efficiency of 4.7.

Correction for 'Luminescent columnar discotics as highly efficient emitters in pure deep-blue OLEDs with an external quantum efficiency of 4.7%' by Joydip De et al., Soft Matter, 2022, DOI: 10.1039/d1sm01558c.

Luminescent columnar discotics as highly efficient emitters in pure deep-blue OLEDs with an external quantum efficiency of 4.7.

Development of materials that serve as efficient blue emitters in solution-processable OLEDs is challenging. In this study, we report three derivatives of C3-symmetric 1,3,5-tris(thien-2-yl)benzene-based highly luminescent room temperature columnar discotic liquid crystals (DLCs) suitable as solid-state emitters in OLED devices. When employed in solution-processed OLEDs, one of the derivatives having the highest photoluminescence quantum yield exhibited a maximum EQE of 4.7% and CIE chromaticity of (0.16, 0.05) corresponding to the ultra deep-blue emission. The finding is sufficiently significant in the field of DLC-based deep blue emitters.

Pyridinyl-Carbazole Fragments Containing Host Materials for Efficient Green and Blue Phosphorescent OLEDs.

Pyridinyl-carbazole fragments containing low molar mass compounds as host derivatives H1 and H2 were synthesized, investigated, and used for the preparation of electro-phosphorescent organic light-emitting devices (PhOLEDs). The materials demonstrated high stability against thermal decomposition with the decomposition temperatures of 361-386 °C and were suitable for the preparation of thin amorphous and homogeneous layers with very high values of glass transition temperatures of 127-139 °C. It was determined that triplet energy values of the derivatives are, correspondingly, 2.82 eV for the derivative H1 and 2.81 eV for the host H2. The new derivatives were tested as hosts of emitting layers in blue, as well as in green phosphorescent OLEDs. The blue device with 15 wt.% of the iridium(III)[bis(4,6-difluorophenyl)-pyridinato-N,C2']picolinate (FIrpic) emitter doping ratio in host material H2 exhibited the best overall characteristics with a power efficiency of 24.9 lm/W, a current efficiency of 23.9 cd/A, and high value of 10.3% of external quantum efficiency at 100 cd/m2. The most efficient green PhOLED with 10 wt% of Ir(ppy)3 {tris(2-phenylpyridine)iridium(III)} in the H2 host showed a power efficiency of 34.1 lm/W, current efficiency of 33.9 cd/A, and a high value of 9.4% for external quantum efficiency at a high brightness of 1000 cd/m2, which is required for lighting applications. These characteristics were obtained in non-optimized PhOLEDs under an ordinary laboratory atmosphere and could be improved in the optimization process. The results demonstrate that some of the new host materials are very promising components for the development of efficient phosphorescent devices.

Molecular Engineering for the Development of a Discotic Nematic Mesophase and Solid-State Emitter in Deep-Blue OLEDs.

A unique strategy for the attainment of a discotic nematic (ND) mesophase is reported consisting of a central benzene core to which are attached two 4-alkylphenyl and two 4-pentylbiphenyl moieties diagonally via alkynyl linkers. The rotational nature and incompatibility of unequal phenylethynyl units led to the disruption of π-π interactions within cores that aids to the realization of ND phase and favors high solid-state emission. When used in OLEDs, compounds act as an efficient solid-state pure deep-blue emitter with Commission Internationale de L'Eclairage (CIEx,y) coordinates of (0.16, 0.07).

High-Throughput Virtual Screening of Host Materials and Rational Device Engineering for Highly Efficient Solution-Processed Organic Light-Emitting Diodes.

The appropriate choice of host and electron-transporting material (ETM) plays a very crucial role in the generation and collection of radiative excitons in the desired recombination zone of organic light-emitting diodes (OLEDs). Due to the sustainable development of material organic chemistry, there is a big library of functional materials that leads to uncountable combinations of device structures, which might achieve a desirable high device performance. However, there is no appropriate methodology available for the fast virtual screening of organic materials and designing a suitable device structure. Here, we have used the electrical software package SETFOS 4.5 for high-throughput virtual screening of host materials and developed a highly efficient multistack OLED device structure. To further enhance the device performance, a co-host approach has been used, and the final device structure has also been optimized with two different ETMs. The best-optimized Ir(ppy)3-based solution-processed green OLED device exhibited a maximum power efficiency (PE) of 83.20 lm/W and brightness of 61,362 cd/m2 with a driving voltage of 2.1 V without using any light extraction outcoupling techniques, which is the best among the OLEDs in its own category. The developed device structure has also been utilized to fabricate highly efficient blue hazard-free low-color temperature OLEDs for a physiologically friendly light at night. The resultant 2083 K OLED device displayed a maximum PE of 51.4 lm/W and luminance of 44,548 cd/m2 with a turn-on voltage of 2.1 V that is also 42 and 104 times safer in terms of retinal protection and ∼4 and ∼11 times safer in terms of melatonin generation when compared with those of a real candle and incandescent bulb, respectively. The observed excellent device performance may be attributed to the balanced charge carrier in the recombination zone, broader emissive layer due to a mixed-host system, less accumulation of charges at the injecting surfaces, well-aligned triplet energy and molecular orbital energy level of the host and guest, and high electron mobility and enhanced hole blocking ability of the employed ETM in the designed OLED device structure.

AIE-active mechanoluminescent discotic liquid crystals for applications in OLEDs and bio-imaging.

A multifunctional molecular design of fluorescent discotic liquid crystal (DLC) consisting of a tetraphenylethylene core is reported, which is found to serve as an excellent solid-state emitter in OLED devices with EQE of 4.4% and tunable mechanochromism. X-ray diffraction studies unveiled that change in supramolecular self-assembly is the physical origin of mechanochromism. The luminescent DLC molecule has been shown to act as a highly selective probe for labelling acidic cellular compartments (such as lysosomes) in bio-imaging using HeLa cells.

Role of Molecular Orbital Energy Levels in OLED Performance.

Abundant molecules enable countless combinations of device architecture that might achieve the desirable high efficiency from organic light-emitting diodes (OLEDs). Due to the relatively high cost of OLED materials and facilities, simulation approaches have become a must in further advancing the field faster and saver. We have demonstrated here the use of state-of-art simulation approaches to investigate the effect of molecular orbital energy levels on the recombination of excitons in OLED devices. The devices studied are composed of 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) as hole transporting material (HTM), 4,4'-Bis(9-carbazolyl)-1,1'-biphenyl (CBP) as host, 2,2',2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) or bathophenanthroline (Bphen) as electron transporting materials. The outcomes reveal that exciton recombination highly sensitive to the energy-level alignment, injection barriers, and charge mobilities. A low energy-barrier (<0.4 eV) between the layers is the key to yield high recombination. The lowest unoccupied molecular orbital (LUMO) levels of the organic layers have played a more pivotal role in governing the recombination dynamics than the highest occupied molecular orbital (HOMO) level do. Furthermore, the Bphen based device shows high exciton recombination across the emissive layer, which is >106 times greater than that in the TPBi based device. The high carrier mobility of Bphen whose electron mobility is 5.2 × 10-4 cm2 V-1 s-1 may lead to low charge accumulation and hence high exciton dynamics. The current study has successfully projected an in-depth analysis on the suitable energy-level alignments, which would further help to streamline future endeavours in developing efficient organic compounds and designing devices with superior performance.

Approaches for Long Lifetime Organic Light Emitting Diodes.

Organic light emitting diodes (OLEDs) have been well known for their potential usage in the lighting and display industry. The device efficiency and lifetime have improved considerably in the last three decades. However, for commercial applications, operational lifetime still lies as one of the looming challenges. In this review paper, an in-depth description of the various factors which affect OLED lifetime, and the related solutions is attempted to be consolidated. Notably, all the known intrinsic and extrinsic degradation phenomena and failure mechanisms, which include the presence of dark spot, high heat during device operation, substrate fracture, downgrading luminance, moisture attack, oxidation, corrosion, electron induced migrations, photochemical degradation, electrochemical degradation, electric breakdown, thermomechanical failures, thermal breakdown/degradation, and presence of impurities within the materials and evaporator chamber are reviewed. Light is also shed on the materials and device structures which are developed in order to obtain along with developed materials and device structures to obtain stable devices. It is believed that the theme of this report, summarizing the knowledge of mechanisms allied with OLED degradation, would be contributory in developing better-quality OLED materials and, accordingly, longer lifespan devices.

Synthesis of Solution-Processable Donor-Acceptor Pyranone Dyads for White Organic Light-Emitting Devices.

A series of donor-acceptor pyranones (3a-m, 4a-h) were synthesized using α-oxo-ketene- S, S-acetal as the synthon for their application as emissive materials for energy-saving organic light-emitting devices (OLEDs). Among them, five pyranones 3f, 3g, 3h, 3m, and 4e exhibited highly bright fluorescence in the solid state and weak or no emission in the solution state. Photophysical analysis of these dyes revealed that only 3f and 3m showed aggregation-induced emission behavior in a THF/water mixture (0-99%) with varying water fractions ( fw) leading to bright fluorescence covering the entire visible region, while other derivatives 3g, 3h, and 4e did not show any fluorescence signal. The computational studies of the compounds revealed that the longer wavelength absorption originates from HOMO to LUMO electronic excitation. These dyes exhibited good thermal stability with 5% weight loss temperature in the range of 218-347 °C. The potential application of the donor-acceptor pyranone dyads was demonstrated by fabrication of solution-processed OLEDs. Remarkably, OLED devices prepared using highly emissive compounds 6-(anthracen-9-yl)-4-(methylthio)-2-oxo-2 H-pyran-3-carbonitrile (3m) and 6-(4-methoxyphenyl)-4-(methylthio)-2-oxo-2 H-pyran-3-carbonitrile (3f) displayed pure white emission with CIE coordinates of (0.29, 0.31) and (0.32, 0.32), respectively. Additionally, the resultant devices exhibited external quantum efficiencies of 1.9 and 1.2% at 100 cd m-2, respectively.

Room-Temperature Columnar Liquid Crystals as Efficient Pure Deep-Blue Emitters in Organic Light-Emitting Diodes with an External Quantum Efficiency of 4.0.

A novel design of aggregation-induced emission (AIE) active columnar (Col) luminomesogens is reported, and they are demonstrated to act as highly efficient deep-blue emitters in organic light-emitting diodes (OLEDs). All derivatives exhibit Col liquid crystalline (LC) behavior at room temperature over a wide temperature range and desirable alignment properties, which is very important in using them as materials for organic electronic devices. These new AIE active luminomesogens were found to act as highly efficient emitters in OLEDs and unveiled a maximum external quantum efficiency of 4.0% for the first time in Col LCs with Commission International de l'E'clairage coordinates of (0.17, 0.07), which closely matches the National Television System Committee (NTSC) standard, corresponding to pure deep blue color. The detailed supramolecular assembly of the compounds has been characterized by modeling in the mesophase derived from small- and wide-angle X-ray scattering results.