Identification and determination of the volatile organics of third-hand smoke from different cigarettes and clothing fabrics.

Third-hand smoke (THS) is a persistent mixture generated from aged second-hand smoke (SHS) that accumulates in indoor environments and reemits into the air. This work evaluates the tobacco-derived volatile organics of cigarette THS from various clothing fabrics that were exposed to side-stream smoke of several brands of cigarettes in a controlled experimental scale. The qualitative and quantitative determination of the chemicals off-gassed was performed using solid phase micro-extraction coupled with GC/MS. Sixty-six components of side-stream smoke were identified in third-hand cigarette smoke. In this study, toluene-reference concentration (TRC) was calculated for volatile compounds and estimated based on the basic response characteristics of GC/MS. Among the identified analytes, 16 compounds were quantified presenting high toxicity and/or abundance in smoke, such as: benzene, toluene, xylene, pyridine, limonene, naphthalene, furfural and nicotine. The results showed that the total quantified volatile organics released for cotton, wool, polyester and filament fabrics were 92.37, 93.09, 87.88, and 50.22 µg/l fabric, respectively. Fabric structure significantly affects chemical off-gassing. Natural fibers were more capable of holding and emitting THS than synthetic fibers. Besides, various desorption times from 15 to 45 min after exposure to cigarette smoke in the study were evaluated. With increasing desorption time, no significant decrease in the concentration of organic compounds in THS was observed. Therefore, it is necessary to pay attention to the fact that it will be difficult to clean the pollutants from the environment contaminated with cigarette smoke and it will take more hours to reduce the concentration of organic compounds.

Adsorptive removal of endocrine disrupting compounds from aqueous solutions using magnetic multi-wall carbon nanotubes modified with chitosan biopolymer based on response surface methodology: Functionalization, kinetics, and isotherms studies.

Recently, the presence of endocrine disrupting compounds in the environment has emerged as a global and ubiquitous problem. In this study, a novel synthesis of magnetically carbon nanotube modified with biological polymeric was successfully prepared. The effect of different parameters on the Bisphenol A (BPA) adsorption was studied. A prediction model for BPA adsorption was extended based on the Central Composite Design. Also, the prepared biopolymeric nanotubes were characterized by FT-IR, XRD, TEM, FE-SEM. The surface morphology of nanocomposite was observed, increased carbon nano tube size, and the levels after surface deposition were completely covered by chitosan proteins. The results of our experiments showed that optimum adsorption conditions was achieved at t = 76 min, BPA concentration 6.5 mg/L, adsorbent dosage 1 g/L and pH = 6.2.The data obtained in this study followed the Langmuir isotherm model and the pseudo-second order model. The maximum monolayer adsorption capacity of nanocomposite for BPA was 46.2 mg/g at 20 °C. This study showed that the adsorption of BPA onto nanocomposite was spontaneous and thermodynamically desirable.