ABSTRACT
A novel adsorbent (MIL-CMIVSB) was fabricated by modification of H2N-MIL-101(Cr) with carboxymethyl-imidazolium O-vanillin Schiff base. The MIL-CMIVSB's physicochemical characteristics were examined using the pertinent characterization methods. NH2-MIL-101(Cr) has a BET surface area of 1492.4 m2g-1, while MIL-CMIVSB adsorbent had 1278.7 m2g-1. Batch adsorption experiments examined the MIL-CMIVSB's cupric ion adsorption capacity from aqueous solutions at different adsorbent doses (0.1-3 mg), pH (2.0-10.0), contact times (0-240 min), metal ion initial concentrations (10-300 mg/L), and temperatures (298-308 K). The optimum conditions were 1 mg/mL of MIL-CMIVSB adsorbent, 46 min adsorption time, pH 7, 100 ppm initial cupric ion concentration, and 303 K temperature. MIL-CMIVSB effectively and selectively removes cupric ions with an adsorption capability of 359.05 ± 12.06 mg/g. The nonlinear Liu isotherm governed Cu(II) sorption performance on MIL-CMIVSB (KL = 0.257 ± 0.01 mg/g, R2 = 0.99892) and pseudo-2nd-order kinetically (k2 = 0.00116 × 10-4 g/mg min, R2 = 0.99721).
Subject(s)
Metal-Organic Frameworks , Schiff Bases , Water Pollutants, Chemical , Schiff Bases/chemistry , Adsorption , Water Pollutants, Chemical/chemistry , Metal-Organic Frameworks/chemistry , Copper/chemistry , Water Purification/methods , Hydrogen-Ion Concentration , Ions , KineticsABSTRACT
Cross-linked quaternized polyethersulfone (QPES) hybrid mixed polymer membranes (MPMs) loading amino crystalline nanocellulose (ACNC) were successfully fabricated and applied for phosphate removal. The successful production of novel materials was validated by microscopic, spectral, and microanalytical methods. When compared to the native QPES membrane, the primary qualities of QPES hybrid membranes (hydrophilicity, porosity, permeability, antifouling) have been greatly improved overall. In addition, the surface zeta potential (SZP) and ion exchange capacity (IEC) measurements demonstrated the high positive surface charge densities of MPMs, which is beneficial for phosphate uptake. Phosphate adsorption by these membranes was studied at different temperatures, contact times, and initial phosphate concentrations using batch experiments, to investigate the optimal conditions for phosphate uptake. The MPMs showed excellent adsorption capacities with maximal removal capacities in the range of 68.8-87.95 %. Phosphate adsorption on MPMs was regulated primarily by the Sips isotherm model with multilayer adsorption capabilities and exhibited pseudo-second order kinetics (R2 = 0.9951-0.9976). The positive ΔH° and ΔS° values are indicative of the endothermic nature of phosphate adsorption and randomness increase. The negative ΔG° value indicates the spontaneousity of phosphate adsorption. Phosphate removal effectiveness of the membranes was maintained following recovery and regeneration with NaOH.
Subject(s)
Wastewater , Water Pollutants, Chemical , Phosphates/chemistry , Water Pollutants, Chemical/chemistry , Polymers , Kinetics , Adsorption , Hydrogen-Ion Concentration , ThermodynamicsABSTRACT
A new chelating task-specific ionic liquid (TSIL), lutidinium-based salicylaldoxime (LSOH), and its square pyramidal vanadyl(II) complex (VO(LSO)2 ) have been successfully synthesized and structurally characterized using elemental (CHN), spectral, and thermal analyses. The catalytic activity of the lutidinium-salicylaldoxime complex (VO(LSO)2 ) in the alkene epoxidation reactions was studied under various reaction conditions, such as solvent effect, alkene/oxidant molar ratio, pH, reaction temperature, reaction time, and the catalyst dose. The results demonstrated that the CHCl3 solvent, 1 : 3 of the cyclohexene/H2 O2 ratio, pHâ 8, temperature of 340â K, and catalyst dose of 0.012â mmol are assigned as the optimum conditions for achieving maximum catalytic activity for VO(LSO)2 . Moreover, the VO(LSO)2 complex has the potential for application in the effective and selective epoxidation of alkenes. Notably, under optimal VO(LSO)2 conditions, cyclic alkenes convert more efficiently to their corresponding epoxides than linear alkenes.
Subject(s)
Epoxy Compounds , Ionic Liquids , Alkenes , Catalysis , Ionic Liquids/chemistry , Oximes/chemistry , Vanadium/chemistry , Epoxy Compounds/chemical synthesis , Epoxy Compounds/chemistryABSTRACT
Photocatalysis is a green approach that has appeared to be a viable option for the degradation of a variety of organic contaminants. This work outlines the process of preparing the titanium-based metal-organic framework (MIL-125) photocatalysts using a simple solvothermal method. Structural, morphological, and optical analysis of samples (MT18 and MT48) was carried out by XRD, FT-IR, Raman, SEM, TGA, BET, and UV-Vis. Results indicated that the sample prepared at 150 °C and reaction time of 48 h (MT48) has a low crystal size of 7 nm with an optical band gap of 3.2 eV and a surface area of 301 m2 g-1. Under UV-visible light irradiation, the as-prepared MOFs proved to upgrade photocatalytic activity in degrading crude oil spills in saltwater. Effects of catalyst dosage and exposure time on the degradation of an oil spill in seawater were studied and analyzed using UV-Vis spectrophotometry and gas chromatography (GC-MS) which emphasized that the use of 250 ppm of MT48 photocatalyst under UV-Vis irradiation can degrade about 99% of oil spills in water after 2 h of exposure. The study's data revealed that MIL-125 could be used to photocatalyzed the cleanup of crude oil spills.
ABSTRACT
In this paper, Jr.NiFe2O4 nanoparticles (NPs) were synthesized first time using the leaves extract of Juglans regia via a straightforward process. The physio and phytochemical analysis of plant confirm the presence of macromolecules which function as bio-reductant and stabilize the nanoparticles. The Jr.NiFe2O4 NPs were characterized by UV-visible, FTIR spectroscopy, PXRD pattern, SEM and TGA/DTA analysis. The nanoparticles proved to be optically active having a value of indirect bandgap of energy in the range of 1.53 eV. The Jr.NiFe2O4 NPs have the ability in scavenging 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH) free radicals and showed 58.01% ± 1.2% scavenging activity at 100 µg/mL concentrations. The photocatalytic degradation study of ciprofloxacin (CIP) and Congo red (CR) reveals that the highest degradation rate was acquired for CIP using pH = 3, at 254 nm, while 85% of removal rate was analysed for CR. The kinetic studies in case of CR removal followed pseudo-first-order model with thermodynamic parameters (∆G° = - 5.87 kJ mol-1 K, ΔH° = 1393.50 kJ mol-1 and ΔS° = 22.537 kJ mol-1 K) with error analysis. Overall, these data recommend an innovative inspiring application of a plant-mediated synthesis of Jr.NiFe2O4 NPs.
ABSTRACT
Polyoxometalate-phosphazene salt aggregates comprising cyclophosphazene cations are highly efficient catalysts for environmentally benign biphasic oxidations with hydrogen peroxide. These catalysts self-assemble in situ simply by mixing commercial Keggin POMs and readily available phosphazenes.