ABSTRACT
PURPOSE: To utilize a novel ex vivo perfused human renal model and quantify microwave ablation (MWA) size differences in renal tissue when combining MWA with transarterial embolization (TAE). MATERIALS AND METHODS: Human kidneys (n = 5) declined for transplantation were obtained and connected to a fluoroscopy-compatible ex vivo perfusion system. Two ablations-1 standard MWA and 1 TAE-MWA-were performed in each kidney for 2 minutes at 100 W using a MWA system (Solero Angiodynamics). MWA alone was performed in the upper pole. In the lower pole, MWA was performed after TAE with 40-90 µm radiopaque microspheres to achieve angiographic stasis. Ablation zones of coagulative necrosis were sectioned along the long axis and segmented for maximal short-axis diameter (SAD) and long-axis diameter (LAD) measurements. RESULTS: A total of 10 ablations (5 MWAs and 5 TAE-MWAs) were performed in 5 human kidneys. TAE-MWA resulted in significantly increased SAD, LAD, volume, and sphericity compared with standard MWA ± SD, with mean measurements as follows (5 standard MWAs ± SD vs 5 TAE-MWAs ± SD, 2-tailed t-test): (a) SAD, 1.8 cm (SD ± 0.1) versus 2.5 cm (SD ± 0.1) (P < .001); (b) LAD, 2.9 cm (SD ± 0.3) versus 3.2 cm (SD ± 0.1) (P = .039); (c) volume, 5.0 mL (SD ± 0.5) versus 11.0 mL (SD ± 0.7) (P < .001); and (d) sphericity, 0.4 (SD ± 0.2) versus 0.6 (SD ± 0.1) (P = .049). Histology demonstrated no differences in TAE-MWA other than concentrated microspheres. CONCLUSIONS: This ex vivo human kidney perfusion model confirmed that combined MWA-TAE significantly increased ablation size and spherical shape compared with MWA alone.
ABSTRACT
The ideal bone implant would effectively prevent aseptic as well as septic loosening by minimizing stress shielding, maximizing bone ingrowth, and preventing implant-associated infections. Here, a novel gradient-pore-size titanium scaffold was designed and manufactured to address these requirements. The scaffold features a larger pore size (900 µm) on the top surface, gradually decreasing to small sizes (600 µm to 300 µm) towards the center, creating a gradient structure. To enhance its functionality, the additively manufactured scaffolds were biofunctionalized using simple chemical and heat treatments so as to incorporate calcium and iodine ions throughout the surface. This unique combination of varying pore sizes with a biofunctional surface provides highly desirable mechanical properties, bioactivity, and notably, long-lasting antibacterial activity. The target mechanical aspects, including low elastic modulus, high compression, compression-shear, and fatigue strength, were effectively achieved. Furthermore, the biofunctional surface exhibits remarkable in vitro bioactivity and potent antibacterial activity, even under conditions specifically altered to be favorable for bacterial growth. More importantly, the integration of small pores alongside larger ones ensures a sustained high release of iodine, resulting in antimicrobial activity that persisted for over three months, with full eradication of the bacteria. Taken together, this gradient structure exhibits obvious superiority in combining most of the desired properties, making it an ideal candidate for orthopedic and dental implant applications.
Subject(s)
Iodine , Titanium , Titanium/pharmacology , Protective Devices , Anti-Bacterial Agents/pharmacology , Iodine/pharmacology , IonsABSTRACT
The treatment of critical-sized bone defects has long been a major problem for surgeons. In this study, an intramedullary nail shaped three-dimensional (3D)-printed porous titanium implant that is capable of releasing strontium ions was developed through a simple and cost-effective surface modification technique. The feasibility of this implant as a stand-alone solution was evaluated using a rabbit's segmental diaphyseal as a defect model. The strontium-loaded implant exhibited a favorable environment for cell adhesion, and mechanical properties that were commensurate with those of a rabbit's cortical bone. Radiographic, biomechanical, and histological analyses revealed a significantly higher amount of bone ingrowth and superior bone-bonding strength in the strontium-loaded implant when compared to an untreated porous titanium implant. Furthermore, one-year histological observations revealed that the strontium-loaded implant preserved the native-like diaphyseal bone structure without failure. These findings suggest that strontium-releasing 3D-printed titanium implants have the clinical potential to induce the early and efficient repair of critical-sized, load-bearing bone defects.
Subject(s)
Internal Fixators , Titanium , Animals , Rabbits , Titanium/pharmacology , Prostheses and Implants , Cell Adhesion , Strontium/pharmacologyABSTRACT
Postoperative infection and subsequent device loss are serious complications in the use of titanium dental implants and plates for jawbone reconstruction. We have previously reported that NaOH-CaCl2 -thermal-ICl3 -treated titanium (NaCaThIo) has a nano-scale surface and exhibits antibacterial activity against Staphylococcus aureus. The present study examined the surface properties of mixed-acid treated and then iodine-treated titanium (MA-NaCaThIo), and evaluated oral antibacterial activity and cytotoxicity compared with the results obtained with NaCaThIo. MA-NaCaThIo formed a surface layer with a nano-scale network structure having microscale irregularities, and both the thickness of the surface layer (1.49 ± 0.16 µm) and the average surface roughness (0.35 ± 0.03 µm) were significantly higher than those of NaCaThIo. Furthermore, MA-NaCaThIo maintained high hydrophilicity with a contact angle of 7.5 ± 1.7° even after 4 weeks, as well as improved apatite formation, iodine ion release, and antibacterial activity against Prevotella intermedia compared to NaCaThIo. Cell culture test revealed that MA-NaCaThIo exhibited no cytotoxicity against MG-63 and Vero cells, while increased cell proliferation, ALP activity and mineralization of MG-63 compared to NaCaThIo. This treated titanium is expected to be useful for the development of next-generation titanium devices having both bone-bonding and antibacterial properties.
Subject(s)
Iodine , Titanium , Animals , Chlorocebus aethiops , Titanium/pharmacology , Titanium/chemistry , Iodine/pharmacology , Vero Cells , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Surface PropertiesABSTRACT
The main unmet medical need of bone implants is multifunctional activity, including their ability to induce rapid and physiological osseointegration, counteract bacterial biofilm formation, and prevent in situ chronic inflammation at the same time. This research starts from an already developed c.p. titanium surface with proven bioactive (in vitro hydroxyl apatite precipitation) and antibacterial activities, due to a calcium titanate layer with nano- and micro-scale roughness and loaded with iodine ions. Here, antioxidant ability was added to prevent chronic inflammation by grafting polyphenols of a green tea extract onto the surface, without compromising the other functionalities of the surface. The surface was characterized before and after functionalization through XPS analysis, zeta potential titrations, ion release measurements, in vitro bioactivity tests, SEM and fluorescence microscopy, and Folin-Ciocalteu and biological tests. The presence of grafted polyphenols as a homogeneous layer was proven. The grafted polyphenols maintained their antioxidant ability and were anchored to the surface through the linking action of Ca2+ ions added to the functionalizing solution. Iodine ion release, cytocompatibility towards human mesenchymal stem cells (hMSC), and antibacterial activity were maintained even after functionalization. The antioxidant ability of the functionalized surface was effective in preserving hMSC viability in a chemically induced pro-inflammatory environment, thus showing a scavenger activity towards toxic active species responsible for inflammation.
ABSTRACT
This study hypothesized that an ex vivo renal perfusion model can create smaller microwave ablation (MWA) measurements during perfused states compared with nonperfused states across multiple device settings. Nine bovine kidneys, a fluoroscopic compatible perfusion model, and a commercially-available clinical MWA system were used to perform 72 ablations (36 perfused and 36 nonperfused) at 9 different device settings. Comparing perfused and nonperfused ablations at each device setting, significant differences in volume existed for 6 of 9 settings (P < .05). Collapsed across time settings, the ablation volumes by power were the following (perfused and nonperfused, P value): 60 W, 2.3 cm3 ± 1.0 and 7.2 cm3 ± 2.7, P < .001; 100 W, 5.4 cm3 ± 2.1 and 11.5 cm3 ± 5.6, P < .01; and 140 W, 11.2 cm3 ± 3.7 and 18.7 cm3 ± 6.3, P < .01. Applied power correlated with ablation volume: perfused, 0.021 cm3/W and R = 0.462, P = .004, and nonperfused, 0.029 cm3/W and R = 0.565, P < .001. These results support that an ex vivo perfused organ system can evaluate MWA systems and demonstrate heat sink perfusion effects of decreased ablation size.
Subject(s)
Ablation Techniques , Catheter Ablation , Radiofrequency Ablation , Humans , Animals , Cattle , Liver/surgery , Microwaves/therapeutic use , Perfusion/methods , Catheter Ablation/methods , Kidney/surgeryABSTRACT
Multiple acyl-CoA dehydrogenase deficiency (MADD) is an inherited metabolic disease caused by a defect in electron transfer flavoprotein alpha (ETFA), ETF beta (ETFB), or ETF dehydrogenase (ETFDH), and riboflavin metabolism disorders have recently been reported to present as mimicking MADD. MADD is roughly classified into neonatal (type 1 or 2) and later-onset (type 3) forms. To identify clinicogenetic characteristics in Japan, we investigated 37 Japanese patients with MADD diagnosed from 1997 to 2020. The causes of MADD were ETFDH deficiency in 26 patients, ETFA deficiency in four, ETFB deficiency in six, and riboflavin metabolism disorder in one. All 15 patients with the neonatal-onset type died by 2 years of age, while five of 22 patients with the later-onset form died by 3 years of age. Furthermore, 8 of 15 patients with the later-onset form of ETFDH deficiency treated with riboflavin were riboflavin non-responders. p.Y507D in ETFDH was identified as the most common variant (9 of 48 alleles, 18.8%). Of two patients with a homozygous p.Y507D variant, one experienced disease onset and died in the neonatal period, while the other experienced disease onset at two months of age and died at two years old, suggesting that the p.Y507D variant results in fatal outcomes. Our study concluded that more than half of Japanese patients with MADD died by three years old, and more than half of patients with the later-onset form had poor responsiveness to riboflavin, partly due to the unique Japanese p.Y507D variant in ETFDH.
ABSTRACT
Developing antimicrobial biomaterials is a major challenge in the fields of orthopaedic and dental implants. In this study, we evaluated the bone-bonding ability and antibacterial activity of a novel biomaterial for preventing implant-associated infections. We have previously reported that NaOH heat treatment improved the bone-bonding ability of titanium, which was later modified to release target ions from the calcium titanate surface. Iodine, an essential nutrient, exhibits broad-spectrum antimicrobial activity; hence, we designed a calcium titanate that releases iodine ions (Ca-I-Ti). The material was prepared from a simple solution using heat treatments as well as inexpensive devices and chemical agents. MC3T3-E1 cells seeded on Ca-I-Ti displayed high degrees of bioactivity and viability, and Ca-I-Ti exhibited antibacterial activity against methicillin-susceptible Staphylococcus aureus. In vivo biomechanical and histological experiments showed that Ca-I-Ti had excellent bone-bonding ability at 8 weeks after implantation. In a subcutaneous infection model in rats, methicillin-susceptible Staphylococcus aureus on the implant was reduced by approximately 95% compared to that on commercially pure titanium, indicating that Ca-I-Ti has antibacterial effects in vivo. In addition, no local or systemic complications were observed, and active infection in the surrounding tissues was histologically inhibited. Thus, iodine-containing calcium titanate is a safe biomaterial with excellent bioactivity and antibacterial properties, indicating its potential in preventing implant-associated infections.
Subject(s)
Iodine , Titanium , Animals , Anti-Bacterial Agents/pharmacology , Biocompatible Materials/pharmacology , Calcium , Iodides/pharmacology , Iodine/pharmacology , Ions/pharmacology , Methicillin/pharmacology , Rats , Staphylococcus aureus , Titanium/pharmacologyABSTRACT
There is a paucity of data on nodular regenerative hyperplasia after liver transplant. We aim to define the clinical disease trajectory and identify predictors of outcome for this rare diagnosis. This is a retrospective review of postulated risk factors and outcome in patients with nodular regenerative hyperplasia. Patients were classified as having a late presentation if nodular regenerative hyperplasia was diagnosed > 48 months from transplant, and symptomatic if portal hypertensive symptoms were present. Forty-nine of 3,711 (1.3%) adult recipients developed nodular regenerative hyperplasia, and mortality was 32.7% with an average follow up of 84.6 months. The MELD-Na 6 months after diagnosis did not change significantly. Patients with symptomatic portal hypertension at the time of diagnosis had a significantly higher risk of mortality (51.8%) compared to patients with liver test abnormalities alone (10.5%). 44.9% of patients had no previously postulated risk factor. Anastomotic vascular complications do not appear to be the etiology in most patients. The results suggest the vast majority of patients presenting with liver test abnormalities alone have stable disease and excellent long term survival, in contrast to the 56.3% mortality seen in patients that present more than 48 months after LT with symptomatic portal hypertension at diagnosis.
ABSTRACT
It is difficult to use scanning electron microscopy to observe the structure and movement of biological tissue immersed in the solution. To enable such observations, we created a highly deformable and electron-transmissive polyimide film that can withstand the pressure difference between the high-vacuum electron column and the atmospheric-pressure sample chamber. With this film, we used scanning electron microscopy to measure the intrinsic fine structure and movement of the contractile fibers of excised mouse heart immersed in physiological solutions. Our measurements revealed that the excised heart is a dynamic tissue that undergoes relaxation oscillation based on a three-dimensional force balance.
Subject(s)
Electrons , Animals , Mice , Microscopy, Electron, Scanning , VacuumABSTRACT
Flow injection analysis−tandem mass spectrometry (FIA-TMS) has been applied in a first-tier test of newborn screening (NBS). Although isovalerylcarnitine (i-C5), which is a diagnostic indicator of isovaleric acidemia (IVA), is isobaric with pivaloylcarnitine (p-C5), 2-methylbutyrylcarnitine, and n-valerylcarnitine, these isomers cannot be distinguished by the FIA-TMS. There are many reports of false positives derived from p-C5 due to the use of pivalate-conjugated antibiotics. In this study, we developed a new FIA-TMS method to distinguish i-C5 and p-C5. We found that the intensity ratio of product ions for i-C5 and p-C5 was different in a certain range even under the same analytical conditions. The product ions with the most distinct differences in ionic intensity between the isomers and the collision energies that produce them were determined to be m/z 246.2 > 187.1 and −15 V, respectively. In addition to the quantification ion, a reference ion was defined, and the similarity of the i-C5 and p-C5 reference ion ratios (i-C5 score and p-C5 score, respectively) were used to estimate which isomer (i-C5 and p-C5) was responsible for elevated C5 acylcarnitine in dried blood spots (DBSs). As a result of analyses of 11 DBS samples derived from pivalate-conjugated antibiotics and four DBS samples from IVA patients using our method, it was found that our method was able to correctly determine the type of C5-acylcarnitine (i-C5 or p-C5) in the DBS samples. Implementation of this new FIA-TMS method into the current NBS protocol will allow for a reduction in false positives in IVA.
ABSTRACT
One of the most challenging aspects of the kidney transplant operation is performing vascular anastomoses in the confines and depths of the iliac fossa. General surgery residents need to be adequately trained in this skill to maximize their intraoperative experience during their transplant surgery rotation. While several kidney transplant models have been developed, they are limited in their ability to simulate the challenges of performing anastomoses at varying depths and in confined spaces. Furthermore, they may be expensive or require specialized equipment, such as three-dimensional printers, to build. In this technical report, we describe how to build a low-fidelity, low-cost, and portable kidney transplant model capable of simulating vascular anastomoses at varying depths. Our model can be easily replicated for less than 30 USD using materials available in local stores. It uses inexpensive and reusable parts, allowing trainees a high volume of repetitions.
ABSTRACT
Very long-chain acyl-CoA dehydrogenase (VLCAD) deficiency has been a target of expanded newborn screening (ENBS) using tandem mass spectrometry in Japan. Since the implementation of ENBS, a number of novel ACADVL variants responsible for VLCAD deficiency have been identified. In this study, genotypic differences in Japanese patients with VLCAD deficiency were investigated before and after ENBS. The ACADVL variants in 61 subjects identified through ENBS (ENBS group) and in 40 patients who subsequently developed clinical symptoms without undergoing ENBS (pre-ENBS group) were compared. Subjects in the ENBS group underwent genetic testing and/or VLCAD enzyme activity measurements. Patients in the pre-ENBS group were stratified into three clinical phenotypes and underwent genetic testing. This study revealed that the variants p.K264E, p.K382Q and c.996dupT were found in both groups, but their frequencies were lower in the ENBS group (5.2%, 3.1% and 4.2%, respectively) than in the pre-ENBS group (16.5%, 12.7% and 10.1%, respectively). In addition, p.C607S, p.T409M, p.M478I, p.G289R, p.C237R, p.T260M, and p.R229* were exclusively identified in the ENBS group. Among these variants, p.C607S exhibited the highest frequency (18.8%). The patients who were heterozygous for p.C607S demonstrated 7-42% of control enzyme activity. p.C607S is suspected to be unique to Japanese individuals. According to a comparison of enzyme activity, patients with the p.C607S variant may exhibit higher enzyme activity than those with the p.A416T, p.A180T, p.R450H, and p.K264E variants, which are responsible for the myopathic form of the disease. The VLCAD deficiency genotypes have changed since the initiation of ENBS in Japan.
Subject(s)
Congenital Bone Marrow Failure Syndromes , Lipid Metabolism, Inborn Errors , Mitochondrial Diseases , Muscular Diseases , Acyl-CoA Dehydrogenase/genetics , Acyl-CoA Dehydrogenase, Long-Chain/genetics , Congenital Bone Marrow Failure Syndromes/epidemiology , Humans , Infant, Newborn , Japan/epidemiology , Lipid Metabolism, Inborn Errors/epidemiology , Mitochondrial Diseases/epidemiology , Muscular Diseases/epidemiology , Neonatal Screening/methodsABSTRACT
Emerging and re-emerging infections are a global threat driven by the development of antimicrobial resistance due to overuse of antimicrobial agents and poor infection control practices. Implantable devices are particularly susceptible to such infections due to the formation of microbial biofilms. Furthermore, the introduction of implants into the body often results in inflammation and foreign body reactions. The antimicrobial and anti-inflammatory properties of gallium (Ga) have been recognized but not yet utilized effectively to improve implantable device integration. Furthermore, defensin (De, hBD-1) has potent antimicrobial activity in vivo as part of the innate immune system; however, this has not been demonstrated as successfully when used in vitro. Here, we combined Ga and De to impart antimicrobial activity and anti-inflammatory properties to polymer-based implantable devices. We fabricated polylactic acid films, which were modified using Ga implantation and subsequently functionalized with De. Ga-ion implantation increased surface roughness and increased stiffness. Ga implantation and defensin immobilization both independently and synergistically introduced antimicrobial activity to the surfaces, significantly reducing total live bacterial biomass. We demonstrated, for the first time, that the antimicrobial effects of De were unlocked by its surface immobilization. Ga implantation of the surface also resulted in reduced foreign body giant cell formation and expression of proinflammatory cytokine IL-1ß. Cumulatively, the treated surfaces were able to kill bacteria and reduce inflammation in comparison to the untreated control. These innovative surfaces have the potential to prevent biofilm formation without inducing cellular toxicity or inflammation, which is highly desired for implantable device integration.
Subject(s)
Anti-Infective Agents , Gallium , Anti-Bacterial Agents/pharmacology , Anti-Infective Agents/pharmacology , Anti-Inflammatory Agents/pharmacology , Biofilms , Coated Materials, Biocompatible/pharmacology , Defensins/pharmacology , Gallium/pharmacology , Surface PropertiesABSTRACT
It was reported by Jung and Day in 2011 that a cotton-like glass fiber pad made of borate glass 13-93B3 demonstrated a remarkable wound healing effect. It was approved for sale as a novel wound dressing in the management of acute and chronic wounds in 2016. However, the detailed mechanism of its wound healing effect has not been reported. In the present study, glass fibers of different composition in the system CaO-B2O3-SiO2 were prepared and their in vitro properties investigated to determine the role of the constituent components in wound healing. Fine glass fibers that were 0.6-2.0 µm in diameter were obtained by a melt blown method. However, these fibers were accompanied by small glass beads because of the low viscosity of the glass melts. 13-93B3 glass released an appreciable amount of borate and calcium ions into simulated body fluid (SBF). The amounts of these released ions decreased with partial replacement of the B2O3 in 13-93B3 with SiO2. The addition of large amounts of the borate and calcium ions into the culture medium decreased the viability of the L929 fibroblasts. Partial replacement of the B2O3 in 13-93B3 with SiO2 induced the formation of an apatite-like phase amenable to the adsorption of biological components on its surface in SBF. The wound healing effect of these glass fibers of different composition is worth examining in future animal experiments.
Subject(s)
Boron Compounds/pharmacology , Calcium Compounds/pharmacology , Fibroblasts/physiology , Glass/chemistry , Oxides/pharmacology , Silicon Dioxide/pharmacology , Animals , Bandages , Boron Compounds/chemistry , Calcium Compounds/chemistry , Cell Line , Cell Survival , Materials Testing , Mice , Microscopy, Electron, Scanning , Oxides/chemistry , Silicon Dioxide/chemistryABSTRACT
Grit-blasted/acid-etched titanium dental implants have a moderately roughened surface that is suitable for cell adhesion and exhibits faster osseointegration. However, the roughened surface does not always maintain stable fixation over a long period. In this study, a simple heat treatment at 600°C was performed on a commercially available dental Ti implant with grit-blasting/acid-etching, and its effect on mineralization capacity was assessed by examining apatite formation in a simulated body fluid (SBF). The as-purchased implant displayed a moderately roughened surface at the micrometer scale. Its surface was composed of titanium hydride accompanied by a small amount of alumina particles derived from the grit-blasting. Heat treatment transformed the titanium hydride into rutile without evidently changing the surface morphology. The immersion in SBF revealed that apatite formed on the heated implant at 7 days. Furthermore, apatite formed on the Ti rod surface within 1 day when the metal was subjected to acid and heat treatment without blasting. These indicate that apatite formation was conferred on the commercially available dental implant by simple heat treatment, although its induction period was slightly affected by alumina particles remaining on the implant surface. The heat-treated implant should achieve stronger and more stable bone bonding due to its apatite formation.
Subject(s)
Apatites , Dental Implants , Apatites/pharmacology , Hot Temperature , Microscopy, Electron, Scanning , Osseointegration , Surface Properties , Titanium/pharmacologyABSTRACT
BACKGROUND/AIM: Immune checkpoint inhibitors (ICIs) have demonstrated a survival benefit for patients with cancer. However, the clinical outcomes of subsequent tyrosine kinase inhibitors (TKIs) after ICI failure in patients with metastatic renal cell carcinoma (mRCC) remain unclear. PATIENTS AND METHODS: We retrospectively examined 38 patients with mRCC who started TKIs immediately after nivolumab with (combination group) or without ipilimumab (nivolumab group) between September 2016 and July 2019. RESULTS: Of the 38 patients, 16 and 11 achieved partial response and stable disease, respectively, resulting in a 42.1% objective response rate and 71.1% disease control rate. The median progression-free survival (PFS) from TKI initiation was 8.8 and 12.9 months in the nivolumab and combination groups, respectively. PFS and overall survival were significantly longer in patients with long-term responses to previous ICI treatment (p=0.0152 and p=0.0155, respectively). CONCLUSION: TKIs demonstrate adequate anti-tumour activity after treatment with ICIs in real-world settings.
Subject(s)
Immune Checkpoint Inhibitors/therapeutic use , Ipilimumab/therapeutic use , Kidney Neoplasms/drug therapy , Nivolumab/therapeutic use , Protein Kinase Inhibitors/therapeutic use , Adult , Aged , Aged, 80 and over , Female , Humans , Immune Checkpoint Inhibitors/adverse effects , Kidney Neoplasms/enzymology , Kidney Neoplasms/immunology , Kidney Neoplasms/mortality , Male , Middle Aged , Progression-Free Survival , Protein Kinase Inhibitors/adverse effects , Retrospective Studies , Time Factors , Treatment OutcomeABSTRACT
A 71-year-old man was referred to our hospital for treatment of a 2 cm-sized right renal mass incidentally found by computed tomography (CT) and was diagnosed with right renal cell carcinoma cT1aN0M0. Contrast-enhanced CT revealed that the aorta was completely occluded below the inferior mesenteric artery origin, and Leriche syndrome was diagnosed. CT angiography showed several collateral arteries along the abdominal wall. A robot-assisted laparoscopic partial nephrectomy was performed to treat renal cell carcinoma. Preoperatively, we marked the collateral arteries using ultrasonography to avoid injury during trocar insertion. We did not observe any decrease in blood flow in the right leg during the operation. The pathological diagnosis was clear cell renal cell carcinoma. Leriche syndrome is a chronic occlusive disease involving the infrarenal aorta and the iliac arteries. Since lower limb blood flow is dependent on collateral circulation, it is important to avoid injuring the collateral arteries during surgery.
Subject(s)
Carcinoma, Renal Cell , Kidney Neoplasms , Laparoscopy , Leriche Syndrome , Robotics , Aged , Carcinoma, Renal Cell/complications , Carcinoma, Renal Cell/diagnostic imaging , Carcinoma, Renal Cell/surgery , Humans , Kidney Neoplasms/complications , Kidney Neoplasms/diagnostic imaging , Kidney Neoplasms/surgery , Leriche Syndrome/complications , Leriche Syndrome/diagnostic imaging , Leriche Syndrome/surgery , Male , NephrectomyABSTRACT
Background and Aim: Tocilizumab, a humanized anti-IL-6 receptor antibody, has been used to treat severely to critically ill patients with COVID-19. A living systematic review with meta-analysis of recent RCTs indicates that the combination therapy of corticosteroids and tocilizumab produce better outcomes, while previous observational studies suggest that tocilizumab monotherapy is beneficial for substantial numbers of patients. However, what patients could respond to tocilizumab monotherapy remained unknown. Methods: In this retrospective study we evaluated the effects of tocilizumab monotherapy on the clinical characteristics, serum biomediator levels, viral elimination, and specific IgG antibody induction in 13 severely to critically ill patients and compared with those of dexamethasone monotherapy and dexamethasone plus tocilizumab. Results: A single tocilizumab administration led to a rapid improvement in clinical characteristics, inflammatory findings, and oxygen supply in 7 of 11 patients with severe COVID-19, and could recover from mechanical ventilation management (MVM) in 2 patients with critically ill COVID-19. Four patients exhibited rapidly worsening even after tocilizumab administration and required MVM and additional methylprednisolone treatment. Tocilizumab did not delay viral elimination or inhibit IgG production specific for the virus, whereas dexamethasone inhibited IgG induction. A multiplex cytokine array system revealed a significant increase in the serum expression of 54 out of 80 biomediators in patients with COVID-19 compared with that in healthy controls. Compared with those who promptly recovered in response to tocilizumab, patients requiring MVM showed a significantly higher ratio of basal level of ferritin/CRP and a persistent increase in the levels of CRP and specific cytokines and chemokines including IL-6, IFN-γ, IP-10, and MCP-1. The basal high ratio of ferritin/CRP was also associated with clinical deterioration even in patients treated with dexamethasone and tocilizumab. Conclusion: Tocilizumab as monotherapy has substantial beneficial effects in some patients with severe COVID-19, who showed a relatively low level of the ratio of ferritin/CRP and prompt reduction in CRP, IL-6, IFN-γ, IP-10, and MCP-1. The high ratio of ferritin/CRP is associated with rapid worsening of pneumonia. Further evaluation is warranted to clarify whether tocilizumab monotherapy or its combination with corticosteroid is preferred for severely to critically ill patients with COVID-19.
ABSTRACT
Glycosaminoglycans (GAGs) are present in proteoglycans, which play critical physiological roles in various tissues. They are known to be elevated in mucopolysaccharidoses (MPS), a group of rare inherited metabolic diseases in which the lysosomal enzyme required to break down one or more GAG is deficient. In a previous study, we found elevation of GAGs in a subset of patients without MPS. In the current study, we aim to investigate serum GAG levels in patients with conditions beyond MPS. In our investigated samples, the largest group of patients had a clinical diagnosis of viral or non-viral encephalopathy. Clinical diagnoses and conditions also included epilepsy, fatty acid metabolism disorders, respiratory and renal disorders, liver disorders, hypoglycemia, developmental disorders, hyperCKemia, myopathy, acidosis, and vomiting disorders. While there was no conclusive evidence across all ages for any disease, serum GAG levels were elevated in patients with encephalopathy and some patients with other conditions. These preliminary findings suggest that serum GAGs are potential biomarkers in MPS and other disorders. In conclusion, we propose that GAGs elevated in blood can be used as biomarkers in the diagnosis and prognosis of various diseases in childhood; however, further designed experiments with larger sample sizes are required.