Hydrophobic Modification on the Surface of SiO2 Nanoparticle: Wettability Control.

Good control of the morphology, particle size, and wettability of silica nanoparticles is of increasing importance to their use in a variety of fields. Here, we propose a strategy to tune the surface wettability of nanosilica by changing the dosage of a chemical modifier. A series of measurements, including scanning electron microscopy (SEM), laser scatting technique, Fourier transform infrared (FTIR) spectroscopy, thermogravimetry, and surface hydroxyl number and water contact angle measurement, were conducted to verify the surface chemistry and wettability of these nanoparticles. Through controlled chemical modification, the contact angle of the treated nanoparticles increases from 34.7 to 155° with increasing amount of dichlorodimethylsilane (DCDMS) within a molar ratio (MR) between DCDMS and nanoparticles of 5.17. The number of hydroxyl groups covered on the particle surface decreases gradually from 1.79 to 0.47, and the surface grafting rate could reach 73.7%. As the addition of dichlorodimethylsilane equals MR 5.17, the contact angle reaches the maximum value of 155°, which displays excellent superhydrophobicity. After surpassing the point of MR 5.17, the contact angle does not increase but starts to decrease, ultimately remaining stable at 135°. It can be concluded that the surface wettability of nano-SiO2 particles can be precisely modulated by varying the amounts of the modifier. Furthermore, the modulating mechanism of the process occurring on the surface of SiO2 particles has been investigated at the molecular level.

Pathological Changes in APP/PS-1 Transgenic Mouse Models of Alzheimer's Disease Treated with Ganoderma Lucidum Preparation / 中国医学科学院学报

Objective To explore the efficacy of ganoderma lucidum preparation(Ling Zhi) in treating APP/PS-1 transgenic mouse models of Alzheimer's disease(AD).Methods APP/PS-1 transgenic mice of 4 months were randomly divided into model group,ganoderma lucidum treatment groups,including high [2250 mg/(kg·d)] and middle [750 mg/(kg·d)] dose groups,i.e.LZ-H and LZ-M groups,and the positive control group(treated with donepezil hydrochloride [2 mg/(kg·d)]).In addition,C57BL/6J wild mice were selected as normal group.The animals were administered for 4 months.Histopathological examinations including hematoxylin-eosin(HE) staining,immunohistochemistry,special staining,and electron microscopy were applied,and then the pathological morphology and structures in different groups were compared. Results The senile plaques and neurofibrillar tangles in the cerebrum and cerebellum were dissolved or disappeared in LZ-H and LZ-M groups.Decrease of amyloid angiopathy was found in LZ-H and LZ-M groups.The immature neurons appeared more in hippocampus and dentate nucleus of LZ-H and LZ-M groups than those in AD model and donepezil hydrochloride groups(hippcampus:F=1.738,P=0.016;dentate nucleus:F=1.924,P=0.026),and these immature neurons differentiated to be neurons.More Purkinje cells loss occurred in AD model mice than that in LZ-H and LZ-M groups(F=9.46,P=0.007;F=9.46,P=0.010).The LZ-H and LZ-M groups had more new neuron stem cells grown up in cerebellum.Electromicroscopic examination showed the hippocampal neurons in LZ-H and LZ-M group were integrated,the nuclear membrane was intact,and the mitochondria in the cytoplasm,endoplasmic reticulum,Golgi bodies,microtubules,and synapses were also complete.The microglial cell showed no abnormality.No toxicity appeared in the pathological specimens of mice treated with ganoderma lucidum preparation.Conclusion The ganoderma lucidum preparation can dissolve and decline or dismiss the senile plaques and neurofibrillar tangles in the brain of AD mice and also reduce the amyloid angiopathy.

Did prostate size affect the complication and outcome of plasmakinetic enucleation of the prostate?

OBJECTIVE: To evaluate surgical complications and outcomes based on prostate size in patients with benign prostatic hyperplasia (BPH) treated with plasmakinetic enucleation of the prostate (PKEP). METHODS: A retrospective review was conducted of PKEP performed between July 2008 and January 2013. According to the prostate size on preoperative transrectal ultrasonography measurement, patients were divided into three groups: group 1: <40 ml, group 2: 40-80 ml and group 3: >80 ml. Baseline, perioperative and postoperative data were obtained. RESULTS: There were significant differences among the three groups regarding the mean operative time (p < 0.001) and the mean resected tissue weight (p < 0.001). But enucleation efficiency (p < 0.001) in gm tissue per minute increased significantly as prostate size increased. Mean hemoglobin decrease (p > 0.05), mean postoperative irrigation time (p > 0.05), mean catheter time (p > 0.05) and mean hospital stay (p > 0.05) did not differ significantly among three groups. The three groups had a similar and significant postoperative improvement in International Prostate Symptom Score, quality of life, maximum uroflow rate and post-void residual urine volume independent of prostate size (p < 0.001), but no significant difference was found among three groups at the 12-month follow-up (p > 0.05). Perioperative and postoperative complications did not depend on prostate size (p > 0.05). CONCLUSIONS: Although patients with a larger BPH required significantly longer operation time in PKEP, prostate size did not affect perioperative and postoperative complications or micturition improvement.

Effects of oil on aqueous foams: electrical conductivity of foamed emulsions.

Three-phase foams containing dispersed oils (also called foamed emulsion) are usually encountered in such areas as enhanced oil recovery, food foams, and in foams containing antifoams. The presence of oil causes these complex fluids to exhibit extraordinary properties in contrast to aqueous foams. We experimentally investigated, for the first time, the conductive properties of the foamed emulsions and found that the electrical conductivity increases monotonically with the volumetric liquid fraction, presenting a linear relationship. Combined with the analysis on the foaming capacity and microstructure of this complex fluid, the conductive mechanism is revealed. In these foamed emulsions, the whole conductive network is comprised of two levels of structural hierarchy, which displays a different mechanism from those of the conventional aqueous foams. The lamella of emulsions is taken as primary electrical channel, whereas the secondary electrical channel occurs in the lamella between two bubbles. This conductive behaviour is attributed to the microstructure properties of the foamed emulsions. We believe that such findings are potentially important for a better understanding of the fundamentals of these tri-phase dispersion systems.

2, 3, 5, 4'-Tetrahydroxystilbene-2-O-beta-D-glucoside improves gastrointestinal motility disorders in STZ-induced diabetic mice.

Oxidative stress has recently been considered as a pivotal player in the pathogenesis of diabetic gastrointestinal dysfunction. We therefore investigated the role of 2, 3, 5, 4'-tetrahydroxystilbene-2-O-beta-D-glucoside (THSG) that has a strong anti-oxidant property, in diabetic gastrointestinal dysmotility as well as the underlying protective mechanisms. THSG restored the delayed gastric emptying and the increased intestinal transit in streptozotocin (STZ)-induced diabetic mice. Loss of neuronal nitric oxide synthase (nNOS) expression and impaired nonadrenergic, noncholinergic (NANC) relaxations in diabetic mice were relieved by long-term preventive treatment with THSG. Meanwhile, THSG (10(-7)~10(-4) mol/L) enhanced concentration-dependently NANC relaxations of isolated colons in diabetic mice. Diabetic mice displayed a significant increase in Malondialdehyde (MDA) level and decrease in the activity of glutathione peroxidase (GSH-Px), which were ameliorated by THSG. Inhibition of caspase-3 and activation of ERK phosphorylation related MAPK pathway were involved in prevention of enhanced apoptosis in diabetes afforded by THSG. Moreover, THSG prevented the significant decrease in PPAR-γ and SIRT1 expression in diabetic ileum. Our study indicates that THSG improves diabetic gastrointestinal disorders through activation of MAPK pathway and upregulation of PPAR-γ and SIRT1.

Controlling growth of molecular crystal aggregates for efficient optical waveguides.

Controllable crystal aggregate structures which show highly uniform crystal tubule, rod and cubic like architectures were achieved and the well-defined microrods exhibit outstanding optical waveguide properties.

Changes in degree of conversion and microhardness of dental resin cements.

There are few studies available on the post-light activation or post-mix polymerization of dental resin cements as a function of time. This in vitro study evaluated the successive changes in the degree of conversion (DC) and microhardness during polymerization of six commercial resin cements (light-cured [Choice 2, RelyX Veneer], chemical-cured [Multilink, C&B Cement] and dual-cured [Calibra, RelyX ARC]) within the first 24 hours and up to seven days. Resin specimens were prepared for Fourier transform infrared (FTIR) spectroscopy and microhardness testing to determine the DC and Vickers hardness (VH), respectively. The light-cured materials or mixed pastes of the dual-cured materials were irradiated with a light-curing unit (Elipar TriLight) through a precured composite overlay for 40 seconds. The FTIR spectra and microhardness readings were taken at specified times: 1, 2, 5, 10, 15, 30 and 60 minutes; 24 hours and after two days and seven days. According to the FTIR study, most of the curing reaction of Choice 2 and RelyX Veneer occurred within 10 and 30 minutes, respectively. Multilink, C&B Cement and Calibra exhibited gradual increases in the DC up to 24 hours, with no further statistically significant increase (p > 0.05). RelyX ARC attained a DC value within five minutes, similar to that at seven days (p > 0.05). Choice 2 and RelyXARC showed gradual increases in the VH, up to 15 minutes, with no further significant change over the remaining observation time (p > 0.05). For RelyX Veneer, Multilink, C&B Cement and Calibra, there were no significant increases in the VH value after 24 hours (p > 0.05). The light-cured materials produced significantly higher DC values than the chemical-cured materials (p < 0.05). The DC values of the two dual-cured resin cements were significantly different from each other (p < 0.001). The results suggest that the significant polymerization reaction was finished within 24 hours post-mix or post-light activation for all resin cements tested.