Silicon-RosIndolizine fluorophores with shortwave infrared absorption and emission profiles enable in vivo fluorescence imaging.

In vivo fluorescence imaging in the shortwave infrared (SWIR, 1,000-1,700 nm) and extended SWIR (ESWIR, 1,700-2,700 nm) regions has tremendous potential for diagnostic imaging. Although image contrast has been shown to improve as longer wavelengths are accessed, the design and synthesis of organic fluorophores that emit in these regions is challenging. Here we synthesize a series of silicon-RosIndolizine (SiRos) fluorophores that exhibit peak emission wavelengths from 1,300-1,700 nm and emission onsets of 1,800-2,200 nm. We characterize the fluorophores photophysically (both steady-state and time-resolved), electrochemically and computationally using time-dependent density functional theory. Using two of the fluorophores (SiRos1300 and SiRos1550), we formulate nanoemulsions and use them for general systemic circulatory SWIR fluorescence imaging of the cardiovascular system in mice. These studies resulted in high-resolution SWIR images with well-defined vasculature visible throughout the entire circulatory system. This SiRos scaffold establishes design principles for generating long-wavelength emitting SWIR and ESWIR fluorophores.

Initial Decomposition Mechanism of NH3OH+N5- Crystal under Thermal and Shock Loading: A First-Principles Study.

NH3OH+N5- is a novel energetic material (EM) which has attracted much interest for its promising performances, including high energy density, high density, low sensitivity, and low toxicity. In this study, the initial decomposition mechanism of NH3OH+N5- crystal was investigated under thermal and shock loading by molecular dynamics simulation. First, programmed heating and constant temperature simulations were carried out by molecular dynamics simulation on the basis of density functional theory (DFT-MD). Results indicated that the initial decomposition reactions of NH3OH+N5- could be described by three reactions: proton transfer, ring-opening reaction, and cation decomposition and recombination, and three pathways of ring-opening reaction were found, including the ring-opening of N5-, HN5, and H2N6. The first two reactions are the main pathways that produce N2 molecules. Furthermore, we carried out DFT-MD simulations to study the shock decomposition behaviors of NH3OH+N5-, and three initial steps were proposed: N5-, HN5, and N6 ring-opening. The fewer N5- and HN5 ring-opening reactions were found during the shock simulation, accompanied by a significant change in the N5- bond angle. What's more, the transition states of decomposition reactions were investigated through quantum chemical calculations. The results revealed that the proton transfer reaction exhibits lower activation barriers compared to ring-opening reactions, and proton transfer would accelerate ring-opening reactions. In addition, the ring-opening reaction is the main energy-releasing reaction in the early stages of the decomposition. This work could promote the comprehension of the decomposition mechanism and energy release regularity of N5- ions.

Two Energetic Framework Materials Based on DNM-TNBI as Host Molecule: Effectively Coordinated by Different Cations.

With the demand of develop outstanding-performance energetic materials, 1-(dinitromethyl)-4,4',5,5'-tetranitro-1H,1'H-2,2'-biimidazole (DNM-TNBI) emerged as a great contender (D: 9102 m ⋅ s-1; P: 37.6 GPa). However, the relatively poor thermal stability (Td: 142 °C) limits its practical application. In this study, DNM-TNBI as a host molecule to synthesize two new energetic open-framework materials by effectively coordinated with different cations. Their supramolecular structures were investigated and indicated that [DNM-TNBI2 -][2NH4 +] and [DNM-TNBI2 -][2K+] can be classified as a new energetic hydrogen-bonded ammonium framework (EHAF) and an energetic metal organic framework (EMOF). Meanwhile, their thermal stabilities are higher than that of DNM-TNBI and have satisfactory detonation performance ([DNM-TNBI2 -][2NH4 +], D: 8050 m ⋅ s-1, P: 26.4 GPa; [DNM-TNBI2 -][2K+], D: 8301 m ⋅ s-1, P: 30.8 GPa).

Molecular Engineering of Stabilized Silicon-Rosindolizine Shortwave Infrared Fluorophores.

Fluorescence-based biological imaging in the shortwave infrared (SWIR, 1000-1700 nm) is an attractive replacement for modern in vivo imaging techniques currently employed in both medical and research settings. Xanthene-based fluorophores containing heterocycle donors have recently emerged as a way to access deep SWIR emitting fluorophores. A concern for xanthene-based SWIR fluorophores though is chemical stability toward ambient nucleophiles due to the high electrophilicity of the cationic fluorophore core. Herein, a series of SWIR emitting silicon-rosindolizine (SiRos) fluorophores with emission maxima >1300 nm (up to 1550 nm) are synthesized. The SiRos fluorophore photophysical properties and chemical stability toward nucleophiles are examined through systematic derivatization of the silicon-core alkyl groups, indolizine donor substitution, and the use of o-tolyl or o-xylyl groups appended to the fluorophore core. The dyes are studied via absorption spectroscopy, steady-state emission spectroscopy, solution-based cyclic voltammetry, time-dependent density functional theory (TD-DFT) computational analysis, X-ray diffraction crystallography, and relative chemical stability over time. Optimal chemical stability is observed via the incorporation of the 2-ethylhexyl silicon substituent and the o-xylyl group to protect the core of the fluorophore.

Pyrenylpyridines: Sky-Blue Emitters for Organic Light-Emitting Diodes.

A novel sky-blue-emitting tripyrenylpyridine derivative, 2,4,6-tri(1-pyrenyl)pyridine (2,4,6-TPP), has been synthesized using a Suzuki coupling reaction and compared with three previously reported isomeric dipyrenylpyridine (DPP) analogues (2,4-di(1-pyrenyl)pyridine (2,4-DPP), 2,6-di(1-pyrenyl)pyridine (2,6-DPP), and 3,5-di(1-pyrenyl)pyridine (3,5-DPP)). As revealed by single-crystal X-ray analysis and computational simulations, all compounds possess highly twisted conformations in the solid state with interpyrene torsional angles of 42.3°-57.2°. These solid-state conformations and packing variations of pyrenylpyridines could be correlated to observed variations in physical characteristics such as photo/thermal stability and spectral properties, but showed only marginal influence on electrochemical properties. The novel derivative, 2,4,6-TPP, exhibited the lowest degree of crystallinity as revealed by powder X-ray diffraction analysis and formed amorphous thin films as verified using grazing-incidence wide-angle X-ray scattering. This compound also showed high thermal/photo stability relative to its disubstituted analogues (DPPs). Thus, a nondoped organic light-emitting diode (OLED) prototype was fabricated using 2,4,6-TPP as the emissive layer, which displayed a sky-blue electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.18, 0.34). This OLED prototype achieved a maximum external quantum efficiency of 6.0 ± 1.2% at 5 V. The relatively high efficiency for this simple-architecture device reflects a good balance of electron and hole transporting ability of 2,4,6-TPP along with efficient exciton formation in this material and indicates its promise as an emitting material for design of blue OLED devices.

Influence of Anion Variations on Morphological, Spectral, and Physical Properties of the Propidium Luminophore.

Propidium iodide (3,8-diamino-5-[3-(diethylmethylammonio)propyl]-6-phenylphenanthridinium diiodide, [P][I]), is a well-known red fluorescent dye that is widely used for biological applications such as staining. In this study, we have replaced the iodide counteranion of [P][I] with three hydrophobic and bulky organic anions, trifluoromethanesulfonate/[TfO], bis(trifluoromethanesulfonyl)imide/[NTf2], and bis(perfluoroethylsulfonyl)imide/[BETI], and have thus obtained a propidium-derived group of uniform materials based on organic salts (PGUMBOS). The morphological, spectral, and physical properties of these materials were investigated in order to understand the impact of anion variations. While [P][I] is a crystalline solid, propidium salts with [BETI] or [NTf2] counteranions, i.e., [P][BETI] and [P][NTf2], have significantly lower crystallinity as reflected in powder X-ray diffraction data. In addition, [P][BETI] and [P][NTf2] exhibited improved photothermal stability as compared to [P][I] when examined using thermogravimetric analysis and time-dependent kinetic fluorescence experiments under the given experimental conditions. Spectral and electronic properties of the propidium luminophore were not significantly changed upon anion variations, although fluorescence lifetimes and quantum yields showed a systematic increase with decreasing solvent polarity. The experimental HOMO-LUMO energy gaps of these compounds were ∼2 eV with energies of HOMO and LUMO orbitals obtained as -5.15 (±0.08) and -3.19 (±0.08) eV.

A-TEEMTM, a new molecular fingerprinting technique: simultaneous absorbance-transmission and fluorescence excitation-emission matrix method.

We investigate the new simultaneous absorbance-transmission and fluorescence excitation-emission matrix method for rapid and effective characterization of the varying components from a mixture. The absorbance-transmission and fluorescence excitation-emission matrix method uniquely facilitates correction of fluorescence inner-filter effects to yield quantitative fluorescence spectral information that is largely independent of component concentration. This is significant because it allows one to effectively monitor quantitative component changes using multivariate methods and to generate and evaluate spectral libraries. We present the use of this novel instrument in different fields: i.e. tracking changes in complex mixtures including natural water, wine as well as monitoring stability and aggregation of hormones for biotherapeutics.

A Role for Weak Electrostatic Interactions in Peripheral Membrane Protein Binding.

Bacillus thuringiensis phosphatidylinositol-specific phospholipase C (BtPI-PLC) is a secreted virulence factor that binds specifically to phosphatidylcholine (PC) bilayers containing negatively charged phospholipids. BtPI-PLC carries a negative net charge and its interfacial binding site has no obvious cluster of basic residues. Continuum electrostatic calculations show that, as expected, nonspecific electrostatic interactions between BtPI-PLC and membranes vary as a function of the fraction of anionic lipids present in the bilayers. Yet they are strikingly weak, with a calculated ΔGel below 1 kcal/mol, largely due to a single lysine (K44). When K44 is mutated to alanine, the equilibrium dissociation constant for small unilamellar vesicles increases more than 50 times (∼2.4 kcal/mol), suggesting that interactions between K44 and lipids are not merely electrostatic. Comparisons of molecular-dynamics simulations performed using different lipid compositions reveal that the bilayer composition does not affect either hydrogen bonds or hydrophobic contacts between the protein interfacial binding site and bilayers. However, the occupancies of cation-π interactions between PC choline headgroups and protein tyrosines vary as a function of PC content. The overall contribution of basic residues to binding affinity is also context dependent and cannot be approximated by a rule-of-thumb value because these residues can contribute to both nonspecific electrostatic and short-range protein-lipid interactions. Additionally, statistics on the distribution of basic amino acids in a data set of membrane-binding domains reveal that weak electrostatics, as observed for BtPI-PLC, might be a less unusual mechanism for peripheral membrane binding than is generally thought.

Quantifying transient interactions between Bacillus phosphatidylinositol-specific phospholipase-C and phosphatidylcholine-rich vesicles.

Bacillus thuringiensis secretes the virulence factor phosphatidylinositol-specific phospholipase C (BtPI-PLC), which specifically binds to phosphatidylcholine (PC) and cleaves GPI-anchored proteins off eukaryotic plasma membranes. To elucidate how BtPI-PLC searches for GPI-anchored proteins on the membrane surface, we measured residence times of single fluorescently labeled proteins on PC-rich small unilamellar vesicles (SUVs). BtPI-PLC interactions with the SUV surface are transient with a lifetime of 379 ± 49 ms. These data also suggest that BtPI-PLC does not directly sense curvature, but rather prefers to bind to the numerous lipid packing defects in SUVs. Despite this preference for defects, all-atom molecular dynamics simulations of BtPI-PLC interacting with PC-rich bilayers show that the protein is shallowly anchored with the deepest insertions ∼18 Å above the bilayer center. Membrane partitioning is mediated, on average, by 41 hydrophobic, 8 hydrogen-bonding, and 2 cation-π (between PC choline headgroups and Tyr residues) transient interactions with phospholipids. These results lead to a quantitative model for BtPI-PLC interactions with cell membranes where protein binding is mediated by lipid packing defects, possibly near GPI-anchored proteins, and the protein diffuses on the membrane for ∼100-380 ms, during which time it may cleave ∼10 GPI-anchored proteins before dissociating. This combination of short two-dimensional scoots followed by three-dimensional hops may be an efficient search strategy on two-dimensional surfaces with obstacles.

Determining the critical particle size to induce enhanced emission in aggregates of a highly twisted triarylamine.

Towards highly luminescent aggregates: A highly twisted triphenylamine displays aggregation-induced enhanced emission. A solvent-specific critical molecular aggregate size, once reached, gives rapid onset of enhanced emission in polar solvent mixtures that favor quenching of solvated individual molecule excited states.

Cation-π interactions as lipid-specific anchors for phosphatidylinositol-specific phospholipase C.

Amphitropic proteins, such as the virulence factor phosphatidylinositol-specific phospholipase C (PI-PLC) from Bacillus thuringiensis , often depend on lipid-specific recognition of target membranes. However, the recognition mechanisms for zwitterionic lipids, such as phosphatidylcholine, which is enriched in the outer leaflet of eukaryotic cells, are not well understood. A 500 ns long molecular dynamics simulation of PI-PLC at the surface of a lipid bilayer revealed a strikingly high number of interactions between tyrosines at the interfacial binding site and lipid choline groups with structures characteristic of cation-π interactions. Membrane affinities of PI-PLC tyrosine variants mostly tracked the simulation results, falling into two classes: (i) those with minor losses in affinity, Kd(mutant)/Kd(wild-type) ≤ 5 and (ii) those where the apparent Kd was 50-200 times higher than wild-type. Estimating ΔΔG for these Tyr/PC interactions from the apparent Kd values reveals that the free energy associated with class I is ~1 kcal/mol, comparable to the value predicted by the Wimley-White hydrophobicity scale. In contrast, removal of class II tyrosines has a higher energy cost: ~2.5 kcal/mol toward pure PC vesicles. These higher energies correlate well with the occupancy of the cation-π adducts throughout the MD simulation. Together, these results strongly indicate that PI-PLC interacts with PC headgroups via cation-π interactions with tyrosine residues and suggest that cation-π interactions at the interface may be a mechanism for specific lipid recognition by amphitropic and membrane proteins.

Flavin as a photo-active acceptor for efficient energy and charge transfer in a model donor-acceptor system.

A donor-acceptor dyad model system using a flavin moiety as a photo-active acceptor has been synthesized for an energy and photo-induced electron transfer study. The photophysical investigations of the dyad revealed a multi-path energy and electron transfer process with a very high transfer efficiency. The photo-activity of flavin was believed to play an important role in the process, implying the potential application of flavin as a novel acceptor molecule for photovoltaics.

Recognition-mediated assembly of quantum dot polymer conjugates with controlled morphology.

We have demonstrated a polymer mediated "bricks and mortar" method for the self-assembly of quantum dots (QDs). This strategy allows QDs to self-assemble into structured aggregates using complementary three-point hydrogen bonding. The resulting nanocomposites have distinct morphologies and inter-particle distances based on the ratio between QDs and polymer. Time resolved photoluminescence measurements showed that the optical properties of the QDs were retained after self-assembly.

Highly twisted triarylamines for photoinduced intramolecular charge transfer.

9-(N,N-Dianisylamino)anthracene (9DAAA), 9-(N,N-dianisylamino)dinaphth([1,2-a:2'-1'-j]-anthracene (9DAAH), and 9,10-bis(N,N-dianisylamino)anthracene (910BAA) were synthesized as highly twisted triarylamines with potential for photoexcited internal charge transfer. Crystallography of 9DAAA shows its dianisylamino group to be twisted nearly perpendicular to its anthracene unit, similar to a report for 910BAA. The solution fluorescence spectra show strong bathochromic shifts for each of the three molecular systems with strongly decreased quantum efficiency in higher polarity solvents. Solution-phase (ensemble) time-resolved photoluminescence measurements show up to 4-fold decreases in fluorescence lifetime in acetonitrile compared to hexane. The combined results are consistent with photoinduced, transient intramolecular charge-transfer from the bis-anisylamine unit to the polycyclic aromatic unit. Computational modeling is in accord with intramolecular transfer of electron density from the bis-anisylamino unit to the anthracene, based on in comparisons of HOMO and LUMO.