A diphenylphosphine oxide decorated multi-resonance TADF emitter for narrowband green electroluminescence with an EQE of 32.4.

A new narrowband thermally activated delayed fluorescence emitter, PhCzBN-PO, was developed by incorporating the diphenylphosphine oxide (DPPO) group into a multi-resonance core. The unique properties of DPPO enabled PhCzBN-PO to achieve pure green emission and a nonplanar structure. The resulting electroluminescent devices achieved high external quantum efficiencies up to 32.4% with extremely low efficiency roll-off and pure-green emission with Commission Internationale de L'Eclairage (CIE) coordinates of (0.24, 0.67).

Three-Charge (0, -1, -2) Ligand-Based Binuclear and Mononuclear Deep-Red Phosphorescent Iridium Complexes Bearing Benzo[d]oxazole-2-Thiol Ligand.

A new class of three-charge (0, -1, -2) ligand-based binuclear and mononuclear iridium complexes bearing benzo[d]oxazole-2-thiol ligand have been synthesized. Notably, the binuclear complexes (IrIr1 and IrIr2) can be generated at low temperatures by reacting the iridium complex precursors (2a and 2b) with equal amounts of the benzo[d]oxazole-2-thiol ligands, while the corresponding mononuclear complexes (Ir1 and Ir2) are formed at high temperatures. X-ray diffraction analysis shows that the benzo[d]oxazole-2-thiol ligand plays an unusual and interesting bridging role in binuclear complexes and induces rich intermolecular and intramolecular interactions, while in mononuclear complexes, it forms an interesting four-membered ring coordination. More importantly, all complexes experienced efficient deep-red emission in the 628-674 nm range, and the mononuclear complexes have higher luminescent efficiency and longer excited state lifetime than the binuclear complexes. As a result, organic light-emitting diode devices incorporating two mononuclear complexes (Ir1 and Ir2) as guest material of the light-emitting layer can obtain good maximum external quantum efficiency (3.5% and 5.5%) in the deep-red region (629 and 632 nm) with CIE coordinates (0.61, 0.33) and (0.62, 0.34), along with a low turn-on voltage (2.8 V).

B‒N covalent bond-involved π-extension of multiple resonance emitters enables high-performance narrowband electroluminescence.

Multi-boron-embedded multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters show promise for achieving both high color-purity emission and high exciton utilization efficiency. However, their development is often impeded by a limited synthetic scope and excessive molecular weights, which challenge material acquisition and organic light-emitting diode (OLED) fabrication by vacuum deposition. Herein, we put forward a B‒N covalent bond-involved π-extension strategy via post-functionalization of MR frameworks, leading to the generation of high-order B/N-based motifs. The structurally and electronically extended π-system not only enhances molecular rigidity to narrow emission linewidth but also promotes reverse intersystem crossing to mitigate efficiency roll-off. As illustrated examples, ultra-narrowband sky-blue emitters (full-width at half-maximum as small as 8 nm in n-hexane) have been developed with multi-dimensional improvement in photophysical properties compared to their precursor emitters, which enables narrowband OLEDs with external quantum efficiencies (EQEmax) of up to 42.6%, in company with alleviated efficiency decline at high brightness, representing the best efficiency reported for single-host OLEDs. The success of these emitters highlights the effectiveness of our molecular design strategy for advanced MR-TADF emitters and confirms their extensive potential in high-performance optoelectronic devices.

A Difluoro-Methoxylated Ending-Group Asymmetric Small Molecule Acceptor Lead Efficient Binary Organic Photovoltaic Blend.

Developing a new end group for synthesizing asymmetric small molecule acceptors (SMAs) is crucial for achieving high-performance organic photovoltaics (OPVs). Herein, an asymmetric small molecule acceptor, BTP-BO-4FO, featuring a new difluoro-methoxylated end-group is reported. Compared to its symmetric counterpart L8-BO, BTP-BO-4FO exhibits an upshifted energy level, larger dipole moment, and more sequential crystallinity. By adopting two representative and widely available solvent additives (1-chloronaphthalene (CN) and 1,8-diiodooctane (DIO)), the device based on PM6:BTP-BO-4FO (CN) photovoltaic blend demonstrates a power conversion efficiency (PCE) of 18.62% with an excellent open-circuit voltage (VOC) of 0.933 V, which surpasses the optimal result of L8-BO. The PCE of 18.62% realizes the best efficiencies for binary OPVs based on SMAs with asymmetric end groups. A series of investigations reveal that optimized PM6:BTP-BO-4FO film demonstrates similar molecular packing motif and fibrillar phase distribution as PM6:L8-BO (DIO) does, resulting in comparable recombination dynamics, thus, similar fill factor. Besides, it is found PM6:BTP-BO-4FO possesses more efficient charge generation, which yields better VOC-JSC balance. This study provides a new ending group that enables a cutting-edge efficiency in asymmetric SMA-based OPVs, enriching the material library and shed light on further design ideas.

Synthetic progress of organic thermally activated delayed fluorescence emitters via C-H activation and functionalization.

Thermally activated delayed fluorescence (TADF) emitters have become increasingly prominent due to their promising applications across various fields, prompting a continuous demand for developing reliable synthetic methods to access them. This review aims to highlight the progress made in the last decade in synthesizing organic TADF compounds through C-H bond activation and functionalization. The review begins with a brief introduction to the basic features and design principles of TADF emitters. It then provides an overview of the advantages and concise development of C-H bond transformations in constructing TADF emitters. Subsequently, it summarizes both transition-metal-catalyzed and non-transition-metal-promoted C-H bond transformations used for the synthesis of TADF emitters. Finally, the review gives an outlook on further challenges and potential directions in this field.

Through-Space Charge-Transfer Organogold(III) Complexes Enable High-Performance X-ray Scintillation and Imaging.

Organic scintillators have recently attracted growing attention for X-ray detection in industrial and medical applications. However, these materials still face critical obstacles of low attenuation efficiency and/or inefficient triplet exciton utilization. Here we developed a new category of organogold(III) complexes, Tp-Au-1 and Tp-Au-2, through adopting a through-space interaction motif to realize high X-ray attenuation efficiency and efficient harvesting of triplet excitons for emission. Thanks to the efficient through-space charge transfer process, this panel of complexes achieved higher photoluminescence quantum yield and shorter radiative lifetimes compared with the through-bond reference complexes. Inspiringly, these organogold(III) complexes exhibited polarity-dependent emission origins: thermally activated delayed fluorescence and/or phosphorescence. Under X-ray irradiation, Tp-Au-2 manifested intense radioluminescence together with a record-high scintillation light yield of 77,600 photons MeV-1 for organic scintillators. The resulting scintillator screens demonstrated high-quality X-ray imaging with >16.0 line pairs mm-1 spatial resolution, outstripping most organic and inorganic scintillators. This finding provides a feasible strategy for the design of superior organic X-ray scintillators.

Orienting Group Directed Cascade Borylation for Efficient One-Shot Synthesis of 1,4-BN-Doped Polycyclic Aromatic Hydrocarbons as Narrowband Organic Emitters.

1,4-BN-doped polycyclic aromatic hydrocarbons (PAHs) have emerged as very promising emitters in organic light-emitting diodes (OLEDs) due to their narrowband emission spectra that may find application in high-definition displays. While considerable research has focused on investigating the properties of these materials, less attention has been placed on their synthetic methodology. Here we developed an efficient synthetic method for 1,4-BN-doped PAHs, which enables sustainable production of narrowband organic emitting materials. By strategically introducing substituents, such as methyl, tert-butyl, phenyl, and chloride, at the C5 position of the 1,3-benzenediamine substrates, we achieved remarkable regioselective borylation in the para-position of the substituted moiety. This approach facilitated the synthesis of a diverse range of 1,4-BN-doped PAHs emitters with good yields and exceptional regioselectivity. The synthetic method demonstrated excellent scalability for large-scale production and enabled late-stage transformation of the borylated products. Mechanistic investigations provided valuable insights into the pivotal roles of electron effect and steric hindrance effect in achieving highly efficient regioselective borylation. Moreover, the outstanding device performance of the synthesized compounds 10 b and 6 z, underscores the practicality and significance of the developed method.

Dynamic Reversible Full-Color Piezochromic Fluorogens Featuring Through-Space Charge-Transfer Thermally Activated Delayed Fluorescence and their Application as X-Ray Imaging Scintillators.

Thermally activated delayed fluorescence (TADF) emitters featuring through-space charge transfer (TSCT) can be excellent candidates for piezochromic luminescent (PCL) materials due to their structural dynamics. Spatial donor-acceptor (D-A) stacking arrangements enable the modulation of inter- and intramolecular D-A interactions, as well as spatial charge transfer states, under varying pressure conditions. Herein, we demonstrate an effective approach toward dynamic reversible full-color PCL materials with TSCT-TADF characteristics. Their single crystals exhibit a full-color-gamut PCL process spanning a range of 170 nm. Moreover, the TSCT-TADF-PCL emitters display a unity photoluminescence quantum yield, and show promising application in X-ray scintillator imaging.

Integration of fine-tuned chiral donor with hybrid long/short-range charge-transfer for high-performance circularly polarized electroluminescence.

The synergistic integration of a fine-tuned chiral donor with a hybrid long/short-range charge-transfer mechanism offers an accessible pathway to construct highly efficient circularly polarized emitters. Consequently, a notable dissymmetry factor of 1.6 × 10-3, concomitantly with a record-setting maximum external quantum efficiency of 37.4%, is synchronously realized within a single embodiment.

Deep-Blue Narrowband Hetero[6]helicenes Showing Circularly Polarized Thermally Activated Delayed Fluorescence Toward High-Performance OLEDs.

Helicenes exhibit substantial potential as circularly polarized luminescence (CPL) active molecules. However, their application in circularly polarized organic light-emitting diodes (CP-OLEDs) is typically hindered by the challenge of integrating both high color purity and efficient triplet-harvesting capability, particularly in the blue spectral region. Herein, a series of hetero[6]helicene-based emitters that is strategically engineered through the helical extension of a deep-blue double-boron-based multiple resonance thermally activated delayed fluorescence (MR-TADF) motif, is introduced. Importantly, the helical extension does not cause apparent structural deformation or perturb frontier molecular orbitals; thus, preserving the deep-blue emission and MR-TADF characteristics of the parent molecule. This approach also leads to reduced reorganization energy, resulting in emitters with narrower linewidth and higher photoluminescence quantum yield. Further, the helical motif enhances the racemization barrier and leads to improved CPL performance with luminescence dissymmetry factor values up to 1.5 × 10-3 . Exploiting these merits, devices incorporating the chiral dopants demonstrate deep-blue emission within the Broadcast Service Television 2020 color-gamut range, record external quantum efficiencies (EQEs) up to 29.3%, and have distinctive circularly polarized electroluminescence (CPEL) signals. Overall, the authors' findings underscore the helical extension as a promising strategy for designing narrowband chiroptical materials and advancing high-definition displays.

Indolo[3,2-b]indole-based multi-resonance emitters for efficient narrowband pure-green organic light-emitting diodes.

Organic light-emitting diodes (OLEDs) utilizing multi-resonance (MR) emitters show great potential in ultrahigh-definition display benefitting from superior merits of MR emitters such as high color purity and photoluminescence quantum yields. However, the scarcity of narrowband pure-green MR emitters with novel backbones and facile synthesis has limited their further development. Herein, two novel pure-green MR emitters (IDIDBN and tBuIDIDBN) are demonstrated via replacing the carbazole subunits in the bluish-green BCzBN skeleton with new polycyclic aromatic hydrocarbon (PAH) units, 5-phenyl-5,10-dihydroindolo[3,2-b]indole (IDID) and 5-(4-(tert-butyl)phenyl)-5,10-dihydroindolo[3,2-b]indole (tBuIDID), to simultaneously enlarge the π-conjugation and enhance the electron-donating strength. Consequently, a successful red shift from aquamarine to pure-green is realized for IDIDBN and tBuIDIDBN with photoluminescence maxima peaking at 529 and 532 nm, along with Commission Internationale de l'Eclairage (CIE) coordinates of (0.25, 0.71) and (0.28, 0.70). Furthermore, both emitters revealed narrowband emission with small full width at half-maximum (FWHM) below 28 nm. Notably, the narrowband pure-green emission was effectively preserved in corresponding devices, which afford elevated maximum external quantum efficiencies of 16.3% and 18.3% for IDIDBN and tBuIDIDBN.

Narrowband Near-Infrared Multiple-Resonance Thermally Activated Delayed Fluorescence Emitters towards High-Performance and Stable Organic Light-Emitting Diodes.

Multiple-resonance thermally activated delayed fluorescence (MR-TADF) materials are highly coveted for their high efficiency and narrowband emission in organic light-emitting diodes (OLEDs). Nevertheless, the development of near-infrared (NIR) MR-TADF emitters remains a formidable challenge. In this study, we design two new NIR MR-TADF emitters, PXZ-R-BN and BCz-R-BN, by embedding 10H-phenoxazine (PXZ) and 7H-dibenzo[c,g]carbazole (BCz) fragments to increase the electron-donating ability or extending π-conjugation on the framework of para-boron fusing polycyclic aromatic hydrocarbons (PAHs). Both compounds emit in the NIR region, with a full-width at half-maximum (FWHM) of 49 nm (0.13 eV) for PXZ-R-BN and 43 nm (0.11 eV) for BCz-R-BN in toluene. To sensitize the two NIR MR-TADF emitters in OLEDs, a new platinum complex, Pt-1, is designed as a sensitizer. The PXZ-R-BN-based sensitized OLEDs achieve a maximum external quantum efficiency (EQEmax ) of nearly 30 % with an emission band at 693 nm, and exceptional long operational stability with an LT97 (time to 97 % of the initial luminance) value of 39084 h at an initial radiance of 1000 mW sr-1 m-2 . The BCz-R-BN-based OLEDs reach EQEmax values of 24.2 % with an emission band at 713 nm, which sets a record value for NIR OLEDs with emission bands beyond 700 nm.

Precise Methylation Yields Acceptor with Hydrogen-Bonding Network for High-Efficiency and Thermally Stable Polymer Solar Cells.

Utilizing intermolecular hydrogen-bonding interactions stands for an effective approach in advancing the efficiency and stability of small-molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2-b]quinoxalin-11-one (Qox) as the electron-deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox-based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond-assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem-dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen-bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor-acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen-bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs.

Simultaneously enhancing the planarity and electron-donating capability of donors for through-space charge transfer TADF towards deep-red emission.

Through-space charge transfer (TSCT) has been proven effective for designing thermally activated delayed fluorescence (TADF) emitters due to the separation of the frontier molecular orbitals. Although tuning of the interaction between the donor and acceptor by controlling the conformation is known to be crucial for the photophysical properties of TSCT excited states, it remains a challenge to realize efficient red and deep-red emissions. Herein, we designed two TSCT molecules, namely TPXZ-QX and TPXZ-2QX, by using oxygen-bridged triphenylamine (TPXZ) as the electron donor with enhanced planarity and electron-donating capability. With a face-to-face orientation of the donor and acceptor segments and close π-π contacts, the new emitters have strong intramolecular noncovalent donor-acceptor interactions. The emissions of TPXZ-QX and TPXZ-2QX in doped thin films lie in the red (λmax = 632 nm) to deep-red (λmax = 665 nm) region. The photoluminescence quantum yields are 41% and 32% for TPXZ-QX and TPXZ-2QX, respectively. Organic light-emitting diodes (OLEDs) based on TPXZ-QX and TPXZ-2QX show external quantum efficiencies (EQEs) of up to 13.8% and 11.4%, respectively. This work indicates that the modulation of TSCT excited states based on strong intramolecular cofacial π-stacking interactions is a viable choice for the development of high-efficiency long-wavelength TADF emitters.

Step-by-Step Modulation of Crystalline Features and Exciton Kinetics for 19.2% Efficiency Ortho-Xylene Processed Organic Solar Cells.

With plenty of popular and effective ternary organic solar cells (OSCs) construction strategies proposed and applied, its power conversion efficiencies (PCEs) have come to a new level of over 19% in single-junction devices. However, previous studies are heavily based in chloroform (CF) leaving behind substantial knowledge deficiencies in understanding the influence of solvent choice when introducing a third component. Herein, we present a case where a newly designed asymmetric small molecular acceptor using fluoro-methoxylated end-group modification strategy, named BTP-BO-3FO with enlarged bandgap, brings different morphological evolution and performance improvement effect on host system PM6:BTP-eC9, processed by CF and ortho-xylene (o-XY). With detailed analyses supported by a series of experiments, the best PCE of 19.24% for green solvent-processed OSCs is found to be a fruit of finely tuned crystalline ordering and general aggregation motif, which furthermore nourishes a favorable charge generation and recombination behavior. Likewise, over 19% PCE can be achieved by replacing spin-coating with blade coating for active layer deposition. This work focuses on understanding the commonly met yet frequently ignored issues when building ternary blends to demonstrate cutting-edge device performance, hence, will be instructive to other ternary OSC works in the future.

Regulation of Multiple Resonance Delayed Fluorescence via Through-Space Charge Transfer Excited State towards High-Efficiency and Stable Narrowband Electroluminescence.

B- and N-embedded multiple resonance (MR) type thermally activated delayed fluorescence (TADF) emitters usually suffer from slow reverse intersystem crossing (RISC) process and aggregation-caused emission quenching. Here, we report the design of a sandwich structure by placing the B-N MR core between two electron-donating moieties, inducing through-space charge transfer (TSCT) states. The proper adjusting of the energy levels brings about a 10-fold higher RISC rate in comparison with the parent B-N molecule. In the meantime, a high photoluminescence quantum yield of 91 % and a good color purity were maintained. Organic light-emitting diodes based on the new MR emitter achieved a maximum external quantum efficiency of 31.7 % and small roll-offs at high brightness. High device efficiencies were also obtained for a wide range of doping concentrations of up to 20 wt % thanks to the steric shielding of the B-N core. A good operational stability with LT95 of 85.2 h has also been revealed. The dual steric and electronic effects resulting from the introduction of a TSCT state offer an effective molecular design to address the critical challenges of MR-TADF emitters.

Pure Polycyclic Aromatic Hydrocarbon Isomerides with Delayed Fluorescence and Anti-Kasha Emission: High-Efficiency Non-Doped Fluorescence OLEDs.

Pure polycyclic aromatic hydrocarbons (PAHs) consisting solely of carbon-hydrogen or carbon-carbon bonds offer great potential for constructing durable and cost-effective emitters in organic electroluminescence devices. However, achieving versatile fluorescence characteristics in pure PAHs remains a considerable challenge, particularly without the inclusion of heteroatoms. Herein, an efficient approach is presented that involves incorporating non-six-membered rings into classical pyrene isomerides, enabling simultaneous achievement of full-color emission, delayed fluorescence, and anti-Kasha emission. Theoretical calculations reveal that the intensity and distribution of aromaticity/anti-aromaticity in both ground and excited states play a crucial role in determining the excited levels and fluorescence yields. Transient fluorescence measurements confirm the existence of thermally activated delayed fluorescence in pure PAHs. By utilizing these PAHs as emitting layers, electroluminescent spectra covering the entire visible region along with a maximum external quantum efficiency of 9.1% can be achieved, leading to the most exceptional results among non-doped pure hydrocarbon-based devices.

Improving the Performance of Layer-by-Layer Organic Solar Cells by n-Doping of the Acceptor Layer.

Molecular dopants can effectively improve the performance of organic solar cells (OSCs). Here, PM6/BTP-eC9-4Cl-based OSCs are fabricated by a layer-by-layer (LbL) deposition method, and the electron acceptor BTP-eC9-4Cl layer is properly doped by n-type dopant benzyl viologen (BV) or [4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl]dimethyl-amine (N-DMBI-H). The power conversion efficiency (PCE) of OSCs increases from 16.80 to 17.61 or 17.84% when the acceptor layer is doped by BV (0.01 wt %) or N-DMBI-H (0.01 wt %), respectively. At the optimal doping concentration, the device exhibits more balanced charge transport, fewer bimolecular recombinations, faster charge separation and transfer, and better stability. This doping strategy has good universality; when the acceptor layer L8-BO of LbL OSCs is doped by 0.01 wt % BV or 0.01 wt % N-DMBI-H, the PCE increases from 17.49 to 18.35 or 18.25%, respectively. All in all, our studies have demonstrated that the doping strategy is effective in enhancing the performance of OSCs.

Narrowband Fluorescent Emitters Based on BN-Doped Polycyclic Aromatic Hydrocarbons for Efficient and Stable Organic Light-Emitting Diodes.

Organic light-emitting diodes (OLEDs) using conventional fluorescent emitters are currently attracting considerable interests due to outstanding stability and abundant raw materials. To construct high-performance narrowband fluorophores to satisfy requirements of ultra-high-definition displays, a strategy fusing multi-resonance BN-doped moieties to naphthalene is proposed to construct two novel narrowband fluorophores. Green Na-sBN and red Na-dBN, manifest narrow full-width at half-maxima of 31 nm, near-unity photoluminescence quantum yields and molecular horizontal dipole ratios above 90 %. Their OLEDs exhibit the state-of-the-art performances including high external quantum efficiencies (EQE), ultra-low efficiency roll-off and long operational lifetimes. The Na-sBN-based device achieves EQE as high as 28.8 % and remains 19.8 % even at luminance of 100,000 cd m-2 , and Na-dBN-based device acquires a record-high EQE of 25.2 % among all red OLEDs using pure fluorescent emitters.

Multi-spiro junctions enable efficient thermally activated delayed fluorescent emitter.

A new acridine donor with trispiro junctions is developed for assembling a highly efficient thermally activated delayed fluorescence emitter. The multispiro junctions ensure a rigid geometry that leads to a well-suppressed nonradiative decay. The resulting electroluminescent devices achieve a high external quantum efficiency of 34.2%.