Quintic refractive index profile-based funnel-shaped silicon antireflective structures for enhanced photodetector performance.

Antireflection, vital in optoelectronics devices such as solar cells and photodetectors, reduces light reflection and increases absorption. Antireflective structures (ARS), a primary method by which to realize this effect, control the refractive index (RI) profile based on their shape. The antireflection efficiency depends on the refractive index profile, with the quintic RI profile being recognized as ideal for superior antireflection. However, fabricating nano-sized structures with a desired shape, particularly in silicon with a quintic RI profile, has been a challenge. In this study, we introduce a funnel-shaped silicon (Si) ARS with a quintic RI profile. Its antireflective properties are demonstrated through reflectance measurements and by an application to a photodetector surface. Compared to the film Si and cone-shaped ARS types, which are common structures to achieve antireflection, the funnel-shaped ARS showed reflectance of 4.24% at 760 nm, whereas those of the film Si and cone-shaped ARS were 32.8% and 10.6%, respectively. Photodetectors with the funnel-shaped ARS showed responsivity of 0.077 A/W at 950 nm, which is 19.54 times higher than that with the film Si and 2.45 times higher than that with the cone-shaped ARS.

Ultrathin Serpentine Insulation Layer Architecture for Ultralow Power Gas Sensor.

Toxic gases have surreptitiously influenced the health and environment of contemporary society with their odorless/colorless characteristics. As a result, a pressing need for reliable and portable gas-sensing devices has continuously increased. However, with their negligence to efficiently microstructure their bulky supportive layer on which the sensing and heating materials are located, previous semiconductor metal-oxide gas sensors have been unable to fully enhance their power efficiency, a critical factor in power-stringent portable devices. Herein, an ultrathin insulation layer with a unique serpentine architecture is proposed for the development of a power-efficient gas sensor, consuming only 2.3 mW with an operating temperature of 300 °C (≈6% of the leading commercial product). Utilizing a mechanically robust serpentine design, this work presents a fully suspended standalone device with a supportive layer thickness of only ≈50 nm. The developed gas sensor shows excellent mechanical durability, operating over 10 000 on/off cycles and ≈2 years of life expectancy under continuous operation. The gas sensor detected carbon monoxide concentrations from 30 to 1 ppm with an average response time of ≈15 s and distinguishable sensitivity to 1 ppm (ΔR/R0 = 5%). The mass-producible fabrication and heating efficiency presented here provide an exemplary platform for diverse power-efficient-related devices.

Ultrafast (∼0.6 s), Robust, and Highly Linear Hydrogen Detection up to 10% Using Fully Suspended Pure Pd Nanowire.

The high explosiveness of hydrogen gas in the air necessitates prompt detection in settings where hydrogen is used. For this reason, hydrogen sensors are required to offer rapid detection and possess superior sensing characteristics in terms of measurement range, linearity, selectivity, lifetime, and environment insensitivity according to the publicized protocol. However, previous approaches have only partially achieved the standardized requirements and have been limited in their capability to develop reliable materials for spatially accessible systems. Here, an electrical hydrogen sensor with an ultrafast response (∼0.6 s) satisfying all demands for hydrogen detection is demonstrated. Tailoring structural engineering based on the reaction kinetics of hydrogen and palladium, an optimized heating architecture that thermally activates fully suspended palladium (Pd) nanowires at a uniform temperature is designed. The developed Pd nanostructure, at a designated temperature distribution, rapidly reacts with hydrogen, enabling a hysteresis-free response from 0.1% to 10% and durable characteristics in mechanical shock and repetitive operation (>10,000 cycles). Moreover, the device selectively detects hydrogen without performance degradation in humid or carbon-based interfering gas circumstances. Finally, to verify spatial accessibility, the wireless hydrogen detection system has been demonstrated, detecting and reporting hydrogen leakage in real-time within just 1 s.