Mussel inspired multifunctional bovine serum albumin (BSA) coatings loaded with Baicalein (BAI) to enhance osteogenesis and resist oxidative stress for potential application on implant.

Oxidative stress is associated with most traumatic or pathological bone defects, and seriously affects the effect of implantation. The construction of antioxidative and osteogenic coatings is of great significance to accelerate the bone regeneration of implants. In this study, baicalein (BAI), a nature flavonoid drug, was loaded in bovine serum albumin (BSA) by desolvent method to prepare BAI-BSA composite protein, and tannic acid (TA)/BAI-BSA coatings were further built via layer by layer self-assembly technology. BAI-BSA possesses good biocompatibility that showed no cytotoxicity to osteoblasts and erythrocytes, and helps to enhance the activity of alkaline phosphatase (ALP) and promote the formation of osteogenic mineralized calcium nodules. After assembled with TA, BAI-BSA coating significantly promoted cell adhesion and in vitro osteogenic mineralization of MC3T3-E1. Moreover, BAI drug loading improved the antioxidative function of BSA coatings effectively. The scavenging rates of (TA/BAI-BSA-10)4 for ABTS+• and DPPH• free radicals were 69.6 ± 16.1 % and 53.4 ± 2.4 %, respectively. At cellular level, the TA/BAI-BSA coating effectively inhibited the impact of oxidative stress on the oxidative damage of osteoblasts. The drug-loaded protein coatings possess both great antioxidative and osteogenic functions, which have important potential in the field of bone repair.

The Preparation and Effects of Organic-Inorganic Antioxidative Biomaterials for Bone Repair.

Reactive oxygen species (ROS) has great influence in many physiological or pathological processes in organisms. In the site of bone defects, the overproduced ROS significantly affects the dynamic balance process of bone regeneration. Many antioxidative organic and inorganic antioxidants showed good osteogenic ability, which has been widely used for bone repair. It is of great significance to summarize the antioxidative bone repair materials (ABRMs) to provide guidance for the future design and preparation of osteogenic materials with antioxidative function. Here, this review introduced the major research direction of ABRM at present in nanoscale, 2-dimensional coating, and 3-dimensional scaffolds. Moreover, the referring main active substances and antioxidative properties were classified, and the positive roles of antioxidative materials for bone repair have also been clearly summarized in signaling pathways, antioxidant enzymes, cellular responses and animal levels.

Universal Strategy to Efficiently Coat Zeolitic Imidazolate Frameworks onto Diverse Substrates.

Anchoring metal-organic framework (MOF) coating has attracted extensive interest due to its wide applications in drug delivery, gas storage and separation, catalysis, and so forth. Here, we reported a flexible strategy on generating ZIF-8 coatings onto diverse substrates in the scale up to hundreds cm2, independent of the geometry of the substrate, with controllable thickness, texture structure, and crystal size of coating. By understanding the mechanism and factors on the formation of ZIF-8 coatings, various zeolitic imidazolate framework coatings were successfully produced. This general strategy and in-depth insights pave the new highway to the design and synthesis of MOF coatings onto diverse substrates.

Poly(tannic acid) nanocoating based surface modification for construction of multifunctional composite CeO2NZs to enhance cell proliferation and antioxidative viability of preosteoblasts.

Ceria (CeO2) based materials possess many antioxidant enzyme-like activities and unique properties for bone repair, but their free radical scavenging function is still insufficient. In order to deal with the complex oxidative stress environment in bone repair, multifunctional composite CeO2 nanozymes (CeO2NZs), featuring multiple antioxidative properties, were constructed via surface modification on CeO2NZs with nanoscale poly(tannic acid) (PTA) coatings. Moreover, we adjusted pH conditions (ranging from 4 to 9) to effectively control the formation and antioxidative properties of PTA coatings on CeO2NZ surfaces. Here, the physical properties of this novel inorganic and organic composite antioxidant, such as surface morphology, particle size, crystal structure, surface charge and element composition, were thoroughly characterized. The PTA/CeO2NZs showed obvious coating morphology under weak acid conditions (pH = 5-6), and the PTA layer at pH = 5 is about 1 nm in thickness. Compared with untreated CeO2NZs, the PTA/CeO2NZs showed stronger SOD-like activity and obviously higher free radical scavenging rate (for both ABTS+˙ and DPPH˙).Notably, this composite antioxidative nanozyme not only exhibited favorable cell proliferation of preosteoblasts (MC3T3-E1) but also provided strong antioxidative property to maintain cell vitality against H2O2 induced oxidative damage. In particular, this study provides new insights into the designing of surface polyphenolic coatings at the nanoscale, and these multiple antioxidative properties shown by PTA coated CeO2NZs make them suitable for protecting cells under the oxidative stress environment.

Lysozyme (Lys), Tannic Acid (TA), and Graphene Oxide (GO) Thin Coating for Antibacterial and Enhanced Osteogenesis.

Dental implants have great potential in the global market, around $3.7 billion in 2015, which will increase to $7 billion in 2023 with an annual increase rate of 8.2%. Incorporating antibacterial and osteogenic agents into implants is helpful to make the dental implants successful, which can be endowed by coatings. In recent years, graphene oxide (GO) and its composite materials have shown advances in the biomedical field. Lysozyme (Lys) and tannic acid (TA) are naturally derived, with promising antibacterial and osteogenic properties as well. In the present study, the strong antibacterial and enhanced osteogenic multilayer coating is fabricated using the facile and controllable layer by layer (LBL) technique to integrate GO, Lys, and TA. The thickness of coating exhibited a continuous growth with the deposited process as proved from UV-vis and ellipsometry data, and the physical properties of the coating, such as wettability, roughness, and stiffness are well characterized. The coatings exhibited the synergic effect on the killing bacteria, both Gram-negative bacteria and Gram-positive bacteria represented by E. coli and S. aureus, respectively, and enhancing osteogenesis of dental pulp stem cells (hDPSCs), showing the potential application on coatings of dental implants. Thus, the strategy applied here will inspire the design and development of dual functional surfaces for the success of implanted dental surface in future.

Building polyphenol and gelatin films as implant coating, evaluating from in vitro and in vivo performances.

Bone related implants have huge potential market in global. Improving the implant outcomes and probability of implant success are highly pursued to relieve the pain of patients and burden on native healthy system. There are growing evidence to support reactive oxygen species (ROS) directly involved in bone diseases and failure of implants. Taking advantage of the antioxidant property of tannic acid (TA) and biocompatibility of gelatin (Gel), the TA/Gel multilayer film was fabricated by layer by layer method, and the growing process of this film was monitored by QCM-D. The physical properties of TA/Gel film were further well characterized and modulated. In cellular test, TA/Gel multilayer film displayed good antioxidant properties under ROS stress environment (after H2O2 treatment flourscence intensity increased 38.9-fold for glasses, only ˜6-fold for (TA/Gel)8), facilitating cell attachment, fastening spreading at early stage and accelerating proliferation in beginning 2 day. Area per cell on (TA/ Gel)4-0.15 M is 1.5-fold higher than that on glass at 2 h, while it became 2.3-fold higher at 4 h. Moreover, these films performed both enhanced osteogenesis in vitro test and bone formation in vivo in the animal bone implanting model. Our results supported discovered the antioxidant coating played the critical role one the success of bone related implants, which could be particularly noted in the future implant design. And the strategy applied here, utilizing the interactions between polyphenol and proteins to construct multilayer film, will pave the way to fabricating an antioxidant coating.

Graphene Oxide and Lysozyme Ultrathin Films with Strong Antibacterial and Enhanced Osteogenesis.

There is a great demand worldwide for bone-related implant materials. The drawbacks of chronic infections and poor bone healing of current implant materials have limited their clinical applications. Functionalizing the implant surfaces with antibacterial and osteogenic films on implant materials provides new opportunities for fabricating novel implant materials. In the present study, an ultrathin (GO/Lys)8 film of several tens of nanometers was fabricated using a layer-by-layer (LBL) technique with alternative deposition of graphene oxide (GO) and lysozyme (Lys). The deposition of the (GO/Lys) n film exhibited a successive growth as supported by ellipsometry, UV-vis, and Fourier transform infrared data, and the physical properties (morphology, roughness, and stiffness) of this film were characterized with an atomic force microscope. The ultrathin films exhibited a great effect on bacterium sterilization of Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and enhanced osteogenic differentiation efficiency, showing the potential application in bone implant coatings. We believe that this LBL assembling strategy will pave the way for fabricating dual-functional surfaces and guide the design of the implanted surfaces in the future.

Berberine attenuates sodium palmitate-induced lipid accumulation, oxidative stress and apoptosis in grass carp(Ctenopharyngodon idella)hepatocyte in vitro.

The objective of this work was to investigate the effect of berberine (BBR) on the Cell viability, lipid accumulation, apoptosis, cytochrome c, caspase-9 and caspase-3 in lipid accumulation-hepatocytes induced by sodium palmitate in vitro. The lipid accumulation-hepatocytes (induced by 0.5 mM sodium palmitate for 24 h) were treated with 5 µM berberine for 12 h. Then, the Cell viability, intracellular triglyceride (TG) content, lipid peroxide (LPO), malonaldehyde (MDA) content, cytochrome c, caspase-9, caspase-3 and apoptosis were detected. Sodium palmitate decreased Cell viability and increased intracellular TG content, lipid droplet accumulation, LPO and MDA concentrations, caused caspase-3 and caspase-9 activation, then led to apoptosis accompanied by cytochrome c release from mitochondria into the cytoplasm. Beberine could improve intracellular lipid droplet accumulation and oxidative stress, while reduce apoptosis induced by sodium palmitate.

A bio-inspired, one-step but versatile coating onto various substrates with strong antibacterial and enhanced osteogenesis.

It is of great interest to prepare osteogenic and antibacterial coatings for successful implants. Current coating techniques suffer from being time-consuming, substrate material or shape dependence, expensive equipment, environmental pollution, low stability, processes that are difficult to control, etc. Herein, inspired by mussels, we report a one-step and versatile method to fabricate a dual functional coating. The coating is finished in minutes independently of materials or dimensions of substrates. Thus, our coatings exhibit strong antibacterial ability against both Gram-positive bacteria S. aureus, and Gram-negative bacteria E. coli, support the proliferation of dental pulp stem cells (DPSCs), and are powerful for inducing osteogenic differentiation. The universality, facility, rapidness, and mildness of our coating process, which is also environmentally-friendly and cost-effective, points towards potential applications in bone or dental implants.

Multifunctional Tannic Acid (TA) and Lysozyme (Lys) Films Built Layer by Layer for Potential Application on Implant Coating.

A multifunctional (TA/Lys)n film, featuring good antioxidant property, fast cell attachment at the initial stage, enhanced osteogenesis, and broad-spectrum antibacterial property, was constructed by the layer-by-layer (LBL) method. The building process was monitored by quartz crystal microbalance with dissipation (QCM-D); the physical properties, such as topography, stiffness in dry and liquid state, and conformation of Lys in the film, were thoroughly characterized. These physical properties were modulated by varying the salt concentration at which the film was constructed. The film not only allows for favorable cell attachment and proliferation of preosteoblasts Mc3t3-E1 but also provides antibacterial property against Gram-positive bacteria, S. aureus and M. lysodeikticus, and Gram-negative bacteria, E. coli. It also displays good antioxidant property, which plays a critical role on fast cell attachment at the initial stage.

Molecular characterization of microtubule-associated protein 1-light chain 3B in Megalobrama amblycephala fed with high fat/berberine diets.

This study tested the effect of berberine on autophagy-related protein of Megalobrama amblycephala fed with high fat diet under different feeding modes. The full-length complementary DNA (cDNA) of microtubule-associated protein 1-light chain 3B (LC3B) was 1871 bp with an open reading frame of 378 bp encoding 125 amino acids. High homology at nucleotide and amino acid sequences to carp LC3B was revealed though sequence analysis. LC3B was mainly (P < 0.05) expressed in hepatopancreas but lower in several peripheral tissues, including gill, intestine, kidney, and spleen. The fish (average initial weight 4.70 ± 0.02 g) were fed with eight experiment diets containing two lipid levels (5 and 10%) or four berberine-feeding modes (without berberine, supplementing 50 mg/kg berberine at 2-week intervals, 4-week intervals, or continuous) for 8 weeks. The results showed that the numbers of autophagosomes and hepatopancreas LC3B messenger RNA (mRNA) expression levels were significantly (P < 0.05) affected both by dietary lipid level and beberine feeding mode, and the highest (P < 0.05) numbers of autophagosomes and LC3B expression levels were observed in fish at berberine continuous feeding mode groups. The findings may provide the molecular mechanisms underlying lipid metabolism and immune effect of berberine, which was associated with enhanced autophagy in fish.

N-carboxyethyl chitosan fibers prepared as potential use in tissue engineering.

To improve the hydrophilicity of chitosan fiber, N-carboxyethyl chitosan fiber was prepared through Michael addition between chitosan fiber with acrylic acid. The structure was studied by (1)H NMR. The degree of N-substitution, measured via (1)H NMR, was easily varied from 0.10 to 0.51 by varying the molar ratio of acrylic acid to chitosan. Series of properties of N-carboxyethyl chitosan fiber including mechanical property, crystallinity, thermal property and in vitro degradation were investigated by Instron machine, X-ray diffraction and differential scanning calorimetry and thermogravimetric analysis, respectively. The results showed that, introducing the carboxyethyl group into the backbone chain of chitosan fiber destroyed the intra/intermolecular hydrogen bonding, leading to loss of the intra/intermolecular hydrogen bonding and improvement of hydrophilicity. Indirect cytotoxicity assessment of carboxyethyl chitosan fibers was investigated using a L929 cell line. And the obtained results clearly suggested that N-carboxyethyl chitosan fiber was nontoxic to L929 cells. The N-carboxyethyl chitosan fibers are potential as tissue engineering scaffolds.