ABSTRACT
OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.
Subject(s)
Cone-Beam Computed Tomography , Facial Asymmetry , Malocclusion, Angle Class III , Orthognathic Surgical Procedures , Humans , Facial Asymmetry/surgery , Facial Asymmetry/diagnostic imaging , Case-Control Studies , Female , Male , Malocclusion, Angle Class III/surgery , Malocclusion, Angle Class III/diagnostic imaging , Orthognathic Surgical Procedures/methods , Treatment Outcome , Adult , Anatomic Landmarks , Severity of Illness Index , Adolescent , Osteotomy, Le FortABSTRACT
Background/purpose: Skeletal stability after orthognathic surgery is essential for positive treatment outcome. This study evaluated the stability of osteotomy segments after surgery-first bimaxillary surgery for class III asymmetry. Materials and methods: Seventy adults with class III asymmetry consecutively corrected through surgery-first Le Fort I and bilateral sagittal split osteotomies were investigated. Cone-beam computed tomography before treatment (T0), 1-week after surgery (T1), and after all treatment (T2, ≥1-year after surgery) was used to assess surgical movement (T0 to T1) and skeletal stability (T1 to T2) regarding the translation and rotation of the maxillary, mandibular distal, and proximal segments. Results: At T1, the maxillary segment had moved forward and upward, turned to the deviated side, and rotated downward (all P < 0.01). The distal segment of mandible had moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment had moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment had moved upward and tilted to the deviated side (both P < 0.01). At T2, significant relapse occurred in the mandible. The distal segment moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment moved upward and tilted to the deviated side (both P < 0.01). Conclusion: Clinically significant relapse of class III asymmetry was discovered on the mandibular distal and opposite proximal segments.
ABSTRACT
OBJECTIVES: Successful orthognathic surgery requires accurate transfer of the intraoperative surgical plan. This study aimed to (1) evaluate the surgical error of a novel intermediate splint in positioning the maxilla during maxilla-first orthognathic surgery and (2) determine factors influencing surgical error. MATERIALS AND METHODS: This prospective study examined 83 patients who consecutively underwent Le Fort I osteotomy for correction of skeletal class III deformity using a novel intermediate splint and a bilateral sagittal split osteotomy. Surgical error was the outcome variable, measured as the difference in postoperative translational and rotational maxillary position from the virtual plan. Measures included asymmetry, need and amount for mandibular opening during fabrication of intermediate splints, and planned and achieved skeletal movement. RESULTS: Mean errors in translation for vertical, sagittal, and transversal dimensions were 1.0 ± 0.7 mm, 1.0 ± 0.6 mm, and 0.7 ± 0.6 mm, respectively; degrees in rotation for yaw, roll, and pitch were 0.8 ± 0.6, 0.6 ± 0.4, and 1.6 ± 1.1, respectively. The transverse error was smaller than sagittal and vertical errors; error for pitch was larger than roll and yaw (both p < 0.001). Error for sagittal, transverse, and roll positioning was affected by the achieved skeletal movement (roll, p < 0.05; pitch and yaw, p < 0.001). Surgical error of pitch positioning was affected by planned and achieved skeletal movement (both p < 0.001). CONCLUSIONS: Using the novel intermediate splint when performing Le Fort I osteotomy allowed for accurate positioning of the maxilla. CLINICAL RELEVANCE: The novel intermediate splint for maxillary positioning can be reliably used in clinical routines.
Subject(s)
Orthognathic Surgery , Orthognathic Surgical Procedures , Humans , Maxilla/surgery , Splints , Prospective Studies , Osteotomy, Le Fort/methods , Orthognathic Surgical Procedures/methods , Imaging, Three-Dimensional/methods , CephalometryABSTRACT
INTRODUCTION: The Chang Gung Forum has been dedicated to the care of craniofacial anomalies since 2000. This annual continuing medical education program focuses on orofacial cleft and surgery-first orthognathic surgery by providing up-to-date information and management guidelines. This study explored how the Chang Gung Forum has influenced medical perspectives, decisions, and practices in a multidisciplinary craniofacial team. METHODS: Between 2000 and 2022, 20 Chang Gung Forums have been held. A questionnaire was distributed among 170 attendees who had participated in the forum more than once. The questionnaire collected information on the participants' experiences and levels of satisfaction with the educational program and whether or how it had influenced their clinical practice. RESULTS: Valid responses from 86 attendees (response rate, 50.6%) who had participated more than once were collected and analyzed. The overall satisfaction rate of the Chang Gung Forum based on the respondents' most recent visits was 4.28 ± 0.63 out of 5. Of the respondents, 90.9% acknowledged changes in their clinical practice, with modifications in surgery plans and decisions being the most notable (48.5%). In addition, comprehension increased throughout years of attending the annual forum (P < 0.001). CONCLUSION: The Chang Gung Forum has contributed markedly to the community of congenital craniofacial anomalies. The program will continue providing updated information and influencing the clinical decision-making of health care professionals.
Subject(s)
Cleft Lip , Cleft Palate , Craniofacial Abnormalities , Humans , Cleft Lip/surgery , Cleft Palate/surgery , Craniofacial Abnormalities/surgery , Education, Medical, Continuing , Surveys and QuestionnairesABSTRACT
BACKGROUND: Although several studies have reported the advantages of the surgery-first approach for orthognathic correction of class III deformity, there is no report of the success of this approach for patients with cleft lip and palate. Therefore, the purpose of this study was to evaluate the stability and outcome of bimaxillary surgery for cleft-related dentofacial deformity using a surgery-first approach. METHODS: Forty-one patients with unilateral cleft lip and palate who consecutively underwent Le Fort I and bilateral sagittal split osteotomies for skeletal class III deformity were included. Cone-beam computed tomographic scans before surgery, 1 week after surgery, and after orthodontic treatment were used to measure the surgical and postsurgical changes in jaw position by landmarks, and outcomes of jaw protrusion and relation, incisor angle and occlusion, and menton deviation after treatment. Self-report questionnaires regarding satisfaction with overall appearance of the face and seven facial regions were administered after treatment. RESULTS: A clinically insignificant relapse was found in the maxilla (<1 mm) and mandible (<2 mm). There was a significant improvement in the jaw protrusion and relation, incisor angle and occlusion, and menton deviation. Responses from the self-report questionnaires completed after treatment indicated that patient satisfaction was high. CONCLUSION: These findings demonstrate surgical-orthodontic treatment with a surgery-first approach can successfully improve cleft-related dentofacial deformity in patients with unilateral cleft lip and palate. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.
Subject(s)
Cleft Lip , Cleft Palate , Dentofacial Deformities , Orthognathic Surgical Procedures , Humans , Cleft Lip/diagnostic imaging , Cleft Lip/surgery , Cleft Palate/diagnostic imaging , Cleft Palate/surgery , Dentofacial Deformities/surgery , Orthognathic Surgical Procedures/methods , Osteotomy, Le Fort/methods , Maxilla/surgery , Cephalometry/methodsABSTRACT
BACKGROUND: This prospective study aimed to compare regional soft tissue changes between patients with class III overbite and open bite deformities treated with bimaxillary surgery involving clockwise and counter-clockwise mandibular setback, respectively. MATERIAL AND METHODS: Class III deformity adults receiving Le Fort I and bilateral sagittal split osteotomies were grouped according to the incisal occlusion: overbite (n = 30) and open bite (n = 30). Combined cone-beam CT scans and 3D facial photographs preoperative and at least 1-year postoperative were taken to assess the soft tissue changes. RESULTS: Postoperative changes for the overbite and open bite groups included anterior repositioning of nose (-0.8 ± 1.2 mm and -1.1 ± 1.1 mm, respectively) and cheek (-1.9 ± 1.3 mm and -1.7 ± 2.6 mm, respectively), posterior repositioning of chin (5.2 ± 4.0 mm and 4.9 ± 3.2 mm, respectively), and medial (-1.7 ± 2.0 mm and -1.9 ± 2.1 mm, respectively) and posterior (2.7 ± 1.4 mm and 2.8 ± 2.3 mm, respectively) repositioning of bilateral angles. Posterior (1.2 ± 2.0 mm and 5.1 ± 3.3 mm) and inferior (-1.4 ± 2.2 mm and -2.4 ± 2.7 mm) repositioning of upper lip and lower lip occurred in overbite group. Inferior (-2.3 ± 2.4 mm) and superior (3.7 ± 3.4 mm) repositioning of chin occurred in the overbite and open bite groups, respectively. CONCLUSIONS: Treatment of class III overbite and open bite deformities with bimaxillary rotational surgery resulted in comparable regional soft tissue changes, except for upper lip, lower lip and chin.
Subject(s)
Malocclusion, Angle Class III , Open Bite , Overbite , Adult , Humans , Open Bite/diagnostic imaging , Open Bite/surgery , Malocclusion, Angle Class III/diagnostic imaging , Malocclusion, Angle Class III/surgery , Imaging, Three-Dimensional , Prospective Studies , Maxilla/diagnostic imaging , Maxilla/surgery , Mandible/surgeryABSTRACT
(1) Background: This study aimed to determine the postoperative vermillion symmetry between the cleft and non-cleft sides of patients with unilateral cleft lip during the early and late postoperative periods. (2) Methods: 57 patients with complete and 38 with incomplete unilateral cleft lips operated on between 2010 and 2014 were retrospectively evaluated within 1 month (T1), 9 months to 1 ½ years (T2), and more than 4 years (T3). Vermilion heights of the cleft and non-cleft sides were measured from frontal photographs. The Cleft Lip Component Symmetry Index (CLCSI) was used to determine the symmetry of the cleft and non-cleft sides and was then analyzed. (3) Results: Among the 95 patients studied, vermilion height was excessive on the cleft side throughout the three time periods. There was a significant increase in CLCSI from T1 to T2 for both complete and incomplete types, and a significant increase from T1 to T3 only in the incomplete group and no difference from T2 to T3 for both the groups. (4) Conclusions: Even with efforts to obtain a symmetric vermilion height during the primary cheiloplasty, vermilion height excess was noted with time in complete and incomplete cleft types. Secondary revisional vermilion surgery may be performed to achieve symmetry.
ABSTRACT
Objective: In this study, we aim to present a single institution's 25-year experience of employing a comprehensive multidisciplinary team-based surgical approach for treating patients with NF-1. Summary Background Data: All patients (n = 106) with a confirmed diagnosis of NF-1 who were treated using a multidisciplinary surgical treatment algorithm at Chang Gung Memorial Hospital between 1994 and 2019 were retrospectively enrolled. Patients were categorized into groups according to the anatomy involved (craniofacial and noncraniofacial groups) and the type of clinical presentation (plexiform and cutaneous neurofibromas groups) for comparative analysis. Methods: The number of surgical interventions and number of specialists involved in surgical care were assessed. Results: Most of the patients exhibited craniofacial involvement (69.8%) and a plexiform type of NF-1 (58.5%), as confirmed through histology. A total of 332 surgical interventions (3.1 ± 3.1 procedures per patient) were performed. The number of specialists involved in surgical care of the included patients was 11 (1.6 ± 0.8 specialists per patient). Most of the patients (62.3%) underwent two or more surgical interventions, and 40.6% of the patients received treatment from two or more specialists. No significant differences were observed between the craniofacial and noncraniofacial groups in terms of the average number of surgical interventions (3.3 ± 3.2 vs. 2.7 ± 2.7, respectively) and number of specialists involved (1.7 ± 0.9 vs. 1.4 ± 0.6). Patients with plexiform craniofacial involvement underwent a significantly higher average number of surgical interventions (4.3 ± 3.6 vs. 1.6 ± 1.1; p < 0.001) and received treatment by more specialists (1.9 ± 0.9 vs. 1.2 ± 0.5; p < 0.001) compared with those having cutaneous craniofacial involvement. Conclusions: In light of the potential benefits of employing the multidisciplinary team-based surgical approach demonstrated in this study, such an approach should be adopted to provide comprehensive individualized care to patients with NF-1.
ABSTRACT
OBJECTIVES: Surgery-first orthognathic surgery is rarely used in class III asymmetry due to concerns of reduced skeletal stability from unstable surgical occlusion. This study aimed to evaluate if skeletal stability after surgery-first orthognathic surgery is related to virtual surgical occlusal contact or surgical change. MATERIALS AND METHODS: We studied 58 adults with class III asymmetry, consecutively corrected by Le Fort I osteotomy and bilateral sagittal split osteotomy using a surgery-first approach. Dental casts were manually set to measure virtual surgical occlusal contact including contact distribution, contact number, and contact area. Cone-beam computed tomography taken before treatment, 1-week post-surgery, and after treatment was used to measure surgical change and post-surgical stability of the maxilla and mandible in translation (left/right, posterior/anterior, superior/inferior) and rotation (pitch, roll, yaw). The relationship between skeletal stability and surgical occlusal contact or surgical change was evaluated with correlation analysis. RESULTS: Significant instability was found in the mandible but not in the maxilla. No correlation was found between the maxillary or mandibular stability and surgical occlusal contact (all p > 0.01). However, a significant correlation was found between the maxillary (roll and yaw) or mandibular (shift, roll and pitch) stability and its surgical change (all p < 0.001). CONCLUSIONS: In correction of class III asymmetry with surgery-first bimaxillary surgery, the skeletal stability is not related to the virtual surgical occlusal contact, but surgical skeletal change. CLINICAL RELEVANCE: Planned over-correction is a reasonable option for correction of severe shift or roll mandibular asymmetry in bimaxillary surgery for class III deformity.
Subject(s)
Malocclusion, Angle Class III , Orthognathic Surgical Procedures , Adult , Cephalometry/methods , Follow-Up Studies , Humans , Malocclusion, Angle Class III/surgery , Mandible/diagnostic imaging , Mandible/surgery , Maxilla/surgery , Orthognathic Surgical Procedures/methods , Osteotomy, Le Fort/methods , Osteotomy, Sagittal Split Ramus/methodsABSTRACT
BACKGROUND: The concept of gingivoperiosteoplasty (GPP) in the mixed dentition stage as compared with secondary alveolar bone grafting (ABG) in management of alveolar cleft has not been much discussed upon. The authors present the experience with extensive GPP and ABG in the mixed dentition stage in complete bilateral alveolar cleft cases. METHODS: A retrospective review of nonsyndromic patients with complete bilateral alveolar cleft operated on with either GPP or ABG (iliac crest) in the mixed dentition stage with at least 1-year follow-up was performed. Dental occlusal radiographs were evaluated for level of bone gain using Bergland and Witherow scales. Statistical evaluation of clinical success and procedure-related complications was conducted using χ2 test and odds ratio. RESULTS: Twenty-four patients in the GPP group and 20 in the ABG group were comparatively studied. Clinical success rate as indicated by Bergland scales I and II (87.5% in GPP vs 82.5% in ABG; P = 0.731), complication rate (20.83% in GPP vs 30% in ABG; P = 0.484), and status of canine eruption showed no significant differences in clinical outcomes in both groups. CONCLUSIONS: The technique of extensive GPP as described by authors shows equal efficacy to secondary ABG for management of bilateral alveolar clefts during the mixed dentition period.
Subject(s)
Alveolar Bone Grafting , Cleft Lip , Cleft Palate , Alveolar Bone Grafting/methods , Bone Transplantation , Cleft Lip/surgery , Cleft Palate/surgery , Dentition, Mixed , Humans , Periosteum/surgery , Retrospective StudiesABSTRACT
OBJECTIVES: Some adults with cleft lip and palate (CLP) require orthognathic surgery due to skeletal deformity. This prospective study aimed to (1) compare skeletal stability following bimaxillary surgery for correction of class III deformity between patients with unilateral CLP (UCLP) and bilateral CLP (BCLP), and (2) identify risk factors of stability. MATERIALS AND METHODS: Adults with CLP and skeletal class III deformities who underwent surgery-first bimaxillary surgery were divided into two groups according to cleft type: UCLP (n = 30) and BCLP (n = 30). Skeletal stability was assessed with measures from cone beam computed tomography images of the maxilla and mandible taken before treatment, 1-week and ≥ 1 year postsurgery for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch); multiple regression analysis examined risk factors. RESULTS: At follow-up, the maxilla moved upwards in both groups, and backwards in the UCLP group. The mandible moved forward and upward, shifted to the cleft (deviated) side, and rotated upward in both groups. The amount of surgical advancement was a risk factor for sagittal stability in the maxilla (ß = -0.14, p < 0.05). The mandible had three risk factors for sagittal stability: age (ß = -0.23, p < 0.05), surgical team (ß = -1.83, p < 0.05), and amount of surgical setback (ß = -0.32, p = 0.001). CONCLUSIONS: Two years after bimaxillary surgery, patients with UCLP had a higher sagittal relapse of the maxilla compared with patients with BCLP, which was due to a greater surgical advancement in the patients with UCLP. CLINICAL RELEVANCE: Surgery-first bimaxillary surgery results in favorable treatment outcomes for correction of cleft-related class III deformity. Severity of jaw discrepancy and surgeons should be considered in the surgical design of overcorrection.
Subject(s)
Cleft Lip , Cleft Palate , Adult , Cephalometry/methods , Cleft Lip/diagnostic imaging , Cleft Lip/surgery , Cleft Palate/diagnostic imaging , Cleft Palate/surgery , Humans , Maxilla/surgery , Prospective StudiesABSTRACT
OBJECTIVES: Maxillomandibular advancement (MMA) is an effective short-term treatment for obstructive sleep apnea (OSA). This study aimed to evaluate the long-term stability of the facial skeleton, upper airway, and its surrounding structures, as well as improvement in OSA following MMA. MATERIALS AND METHODS: Thirty-one adults with moderate-to-severe OSA underwent surgery-first modified MMA as primary surgery. Polysomnography and cone-beam computed tomography were obtained pre-surgery, early post-surgery, and at follow-up (i.e., ≥ 2 years post-surgery). Image analysis software assessed the facial skeleton, upper airway, and its surrounding structures. RESULTS: Early post-surgery, apnea-hypopnea index (AHI) had decreased significantly (p < 0.001) and the minimum oxygen saturation (MSAT) increased (p = 0.001), indicating significant improvement in OSA. At follow-up, the AHI and MSAT remained stable. However, the anterior maxilla, soft palate, and tongue moved backward while the hyoid moved downward. There was also a significant decrease in the minimal cross-sectional area of the oropharynx. The reduction in AHI was significantly related to the anterior movement of the anterior maxilla and tongue, inferior movement of the posterior maxilla, and superior movement of the soft palate tip. CONCLUSIONS: The improvement of OSA after modified MMA remained stable for at least 2 years following treatment, despite the relapse of the facial skeleton, upper airway, and its surrounding structures. The reduction of AHI was not related to changes in the caliber of the upper airway but to the movement of the maxilla, soft palate, and tongue. Clinical relevance Modified MMA is clinically effective for long-term treatment of patients with moderate-to-severe OSA.
Subject(s)
Mandibular Advancement , Sleep Apnea, Obstructive , Adult , Humans , Maxilla/surgery , Palate, Soft , Polysomnography/methods , Sleep Apnea, Obstructive/surgery , Treatment OutcomeABSTRACT
OBJECTIVES: Various methods have been used to classify class III asymmetry. There is little information on the use of an asymmetry index to examine soft tissue changes and outcomes for patients with class III asymmetry. This study aimed to (1) evaluate soft tissue changes and outcomes for three types of mandibular asymmetry and (2) determine if measures are associated with type of asymmetry. MATERIALS AND METHODS: Adults who consecutively underwent bimaxillary surgery using surgery-first approach for correction of class III asymmetry were divided into three groups based on type of mandibular asymmetry. This previously reported classification system is simple and mutually independent, categorizing mandibular asymmetry according to the amount and direction of ramus asymmetry relative to menton deviation: patients with a larger transverse ramus distance on the menton deviation side were divided into group 1 and group 2; group 1 (n = 45) exhibited a menton deviation larger than ramus discrepancy; group 2 (n = 11) exhibited a menton deviation less than ramus discrepancy; group 3 (n = 22) had larger transverse ramus distance contralateral to the side of the menton deviation. Soft tissue facial asymmetry indices, calculated from cone beam computed tomography images, assessed midline and contour asymmetry presurgery, changes postsurgery, and outcomes. RESULTS: Compared with groups 1 and 2, the presurgery index for contour and midline asymmetry was smallest for group 3. All the three groups had significant improvement in midline asymmetry postsurgery, and outcome measures were good; there were no differences between groups. However, contour asymmetry only improved significantly for groups 1 and 2. The outcome for contour asymmetry was fair for groups 1 and 3 and poor for group 2. CONCLUSIONS: Bimaxillary surgery significantly improved facial midline asymmetry. The type of mandibular asymmetry was associated with postsurgical changes and outcomes for contour asymmetry. CLINICAL RELEVANCE: Understanding the types of mandibular asymmetry could help clinicians to develop treatment plans and predict treatment changes and outcomes.
Subject(s)
Malocclusion, Angle Class III , Adult , Cephalometry , Cone-Beam Computed Tomography , Facial Asymmetry/surgery , Humans , Imaging, Three-Dimensional , Malocclusion, Angle Class III/diagnostic imaging , Malocclusion, Angle Class III/surgery , Mandible/surgeryABSTRACT
BACKGROUND: In this study, we aimed to identify factors correlating with satisfaction with orthognathic surgery in order to improve its outcome. METHODS: We recruited 77 participants who had received orthognathic surgery and 32 age- and gender-matched normal-controls. Questionnaires that included devised questions for family support, Big Five Inventory, Derriford Appearance Score, Pittsburgh Sleep Quality Index, Hospital Anxiety and Depression Scale, 36-Item Short-Form Health Survey, and a visual analogy scale for satisfaction, were completed before and one month and nine months after the surgery. The statistical analysis methods included descriptive statistics, t-test, and Pearson correlation. RESULTS: All participants received the preoperative and one-month follow-up, while 28 also completed the nine-month follow-up. Satisfaction was not significantly related to demographic data, but long-term satisfaction was related to an extraverted personality. The preoperative and postoperative results of the Derriford Appearance Scale were related to short-term and long-term satisfaction. Furthermore, both the preoperative and one-month postoperative Pittsburgh Sleep Quality Index findings were significantly related to short-term satisfaction. The postoperative 36-Item Short-Form Health Survey was significantly related to short-term and long-term satisfaction. CONCLUSIONS: Not only subjective distress and dysfunction of appearance but also sleep problems and quality of life were correlated to satisfaction with orthognathic surgery. In the future, relevant interventions can be developed to further improve patient's satisfaction and their physical and mental health.
Subject(s)
Orthognathic Surgery , Orthognathic Surgical Procedures , Humans , Patient Satisfaction , Personal Satisfaction , Quality of Life , Sleep , Surveys and QuestionnairesABSTRACT
OBJECTIVES: Two-jaw orthognathic surgery (OGS) is done using either the one-splint technique with free-hand positioning of the maxillomandibular complex or the two-splint technique with intermediate splints to position the maxilla. It is uncertain which technique achieves better outcomes. This study compares frontal soft tissue symmetry and subjective patient QoL between one-splint and two-splint techniques in skeletal Class III asymmetry patients undergoing OGS with three-dimensional surgical planning. MATERIALS AND METHODS: This retrospective case-control study comprised 34 one-splint and 46 two-splint OGS patients. Frontal photographs and Orthognathic Quality of Life Questionnaire (OQLQ) were done pre- and post-treatment. Frontal soft tissue symmetry was analysed with the anthropometric Facial Symmetry Index. Measurements were compared with t-tests and chi-squared tests with p-value set at 0.05. RESULTS: The groups differed in pre-treatment ANB and OQLQ scores. The two-splint group showed significant improvement in all symmetry measures. The one-splint group showed significant improvement in all symmetry measures except midface deviation, upper contour deviation and the Facial Contour Symmetry Index. Both groups showed significant improvement in OQLQ scores. There were no significant differences in post-treatment symmetry measurements and OQLQ scores between groups. CONCLUSIONS: Although two-splint technique may better improve contour symmetry, there were no significant differences in frontal soft tissue symmetry and QoL after OGS in skeletal Class III asymmetry with either one-splint or two-splint technique, with both techniques resulting in significant improvement. CLINICAL RELEVANCE: One-splint and two-splint surgical techniques produce similar patient-centred outcomes in Class III asymmetry patients.
Subject(s)
Orthognathic Surgery , Splints , Case-Control Studies , Cephalometry , Humans , Maxilla , Quality of Life , Retrospective StudiesABSTRACT
BACKGROUND: Le Fort I maxillary repositioning influences nasal morphology. In Asian cultures, upward nasal tip rotation with increased nostril exposure is considered aesthetically unpleasant and can have psychosocial consequences. This three-dimensional imaging-based study evaluated the effect of different Le Fort I maxillary movements on nasal tip rotation. METHODS: Consecutive patients who underwent two-jaw orthognathic surgery (n = 107) were enrolled. To achieve a standard head orientation, preoperative and 1-week and 12-month postoperative cone-beam computed tomography-derived three-dimensional craniofacial models were superimposed. Tip rotation angle was calculated according to the Frankfort horizontal plane for all three-dimensional digital models. The final tip rotation angle change was defined as 12-month postoperative value minus preoperative value. Translational maxillary movement types (advancement versus setback and intrusion versus extrusion), postoperative maxillary segment locations (anterosuperior, anteroinferior, posterosuperior, or posteroinferior), and actual linear maxillary changes were noted. RESULTS: Advancement (1.79 ± 5.20 degrees) and intrusion (2.23 ± 4.96 degrees) movements demonstrated significantly larger final tip rotation angle changes than setback (-0.88 ± 5.15 degrees) and extrusion (0.09 ± 5.44 degrees) movements (all p < 0.05). Postoperative anterosuperior location (2.95 ± 4.52 degrees) of the maxillary segment demonstrated a significantly larger final tip rotation angle change than anteroinferior (0.48 ± 5.65 degrees), posterosuperior (-1.08 ± 4.77 degrees), and posteroinferior (-0.64 ± 5.80 degrees) locations (all p < 0.05). Translational maxillary movement and actual linear maxillary change were not correlated with final tip rotation angle change. CONCLUSION: Effects of Le Fort I maxillary repositioning on nasal tip rotation depend on movement types and maxillary segment location. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.
Subject(s)
Maxilla/surgery , Nose/surgery , Orthognathic Surgical Procedures , Osteotomy, Le Fort , Adult , Asian People , Female , Humans , Imaging, Three-Dimensional , Male , Maxilla/diagnostic imaging , Nose/diagnostic imaging , Retrospective Studies , Young AdultABSTRACT
OBJECTIVES: To assess and compare the stability and outcomes of the two surgical approaches for patients with roll asymmetry. MATERIALS AND METHODS: A total of 50 adult patients were consecutively recruited for this prospective study. Patients with class III asymmetry and lip or occlusal cant who underwent bimaxillary surgery were grouped according to surgical approach: asymmetric posterior impaction on both sides (API, n = 31) and posterior impaction on one side and posterior extrusion on the other side (PIE, n = 19). Postsurgical stability and outcomes between groups were determined with cone-beam computed tomography for facial midline, lip, and occlusal cant at 1 week (T1), and at least 12-month postsurgery (T2, completion of orthodontic treatment). RESULTS: Presurgery, the upper anterior occlusal cant and lip cant were significantly greater for the PIE group (p < 0.05). Postsurgery (T2), the mandible moved upward and rotated upward in both groups. However, the upward rotation was significantly greater in the PIE group compared with the API group. Although the two approaches resulted in significant improvements in facial symmetry, the deviation in the facial midline remained under-corrected for most API patients. CONCLUSIONS: Patient outcomes for mandibular stability and facial symmetry differed between the two surgical approaches for correction of class III asymmetry with lip or occlusal cant. CLINICAL RELEVANCE: The findings of this study suggest that planned over-correction is a reasonable option for the approach of asymmetric posterior impaction on both sides.
Subject(s)
Malocclusion, Angle Class III , Orthognathic Surgical Procedures , Adult , Cephalometry , Facial Asymmetry/surgery , Humans , Lip/surgery , Mandible , Prospective StudiesABSTRACT
OBJECTIVE: This retrospective study analyzed the outcomes of patients undergoing complete or incomplete unilateral cleft lip repair using the Chang Gung technique. The goal was to compare the symmetry and change of the technique through the measurement of anthropometric points on digital photographs. METHODS: From 2010 to 2016, a total of 274 complete and incomplete cleft lip patients without other craniofacial deformities were included in the study. All included patients had a minimum 1-year follow-up with frontal view photographs taken. The vermilion area, lip width, vermilion height, lateral lip length, lip height, and Cupid's bow width of both cleft and noncleft sides were measured for all patients. The Cleft Lip Component Symmetry Index was used to determine the symmetry of the cleft and noncleft sides in both incomplete and complete cleft groups. RESULTS: A total of 152 complete and 122 incomplete cleft lip patients were included in the study. The mean Cleft Lip Component Symmetry Index values showed that the vermilion area, lip height, and Cupid's bow width were symmetric on both cleft and noncleft sides. Lip width and lateral lip length were noted to be shorter, whereas the vermilion height was thicker on the cleft side than on the noncleft side. Significant differences between the complete and incomplete cleft group measurements were found for lateral lip length and lip height, and complete cleft measurements were shorter than those for incomplete clefts. There were no significant differences in vermilion area, lip width, vermilion height, and Cupid's bow width. CONCLUSIONS: The outcome analysis showed that vermilion height reduction and modifications could be made for both complete and incomplete groups. The complete cleft lip has been found to have a significantly shorter lateral lip length and lip height, reflecting a more severe anatomical soft tissue deficiency in this group. A long-term outcome anthropometric point study may further verify the results of this surgical technique.
Subject(s)
Cleft Lip , Plastic Surgery Procedures , Cleft Lip/surgery , Humans , Infant , Lip/surgery , Retrospective Studies , SkinABSTRACT
BACKGROUND: Le Fort I maxillary movements affect nasal width, but nasal width changes with specific movement types have not been formally addressed to date. OBJECTIVES: The purpose of this study was to analyze and compare the changes in nasal width with different maxillary movements. METHODS: A retrospective study was performed among consecutive patients who underwent bimaxillary orthognathic surgery (n = 138) and who were grouped based on the type of maxillary movement (ie, maxillary advancement with intrusion [MAI], maxillary advancement with extrusion [MAE], and maxillary setback with intrusion [MSI]). Preoperative and 12-month postoperative nasal widths were analyzed photogrammetrically by 2 blinded evaluators. RESULTS: Maxillary advancement with intrusion and MAE presented a significantly (P < 0.05) higher alar base widening than MSI did, with no significant (P > 0.05) differences between MAI and MAE. Maxillary advancement movements (MAI and MAE) showed significantly (P < 0.05) higher alar base widening than maxillary setback movement (MSI). However, no significant (P > 0.05) difference was observed between maxillary intrusion (MAI and MSI) and maxillary extrusion (MAE) movements. CONCLUSIONS: This study shows that the nasal width varies distinctly depending on the type of Le Fort I maxillary surgical movement.