Fabrication of Carbon Dots with Singlet Oxygen Generation and Their Potential Photodynamic Therapy Applications.

Due to the unique chemical and biomedical properties of carbon dots (CDs), they have increasingly obtained the attention in many research fields, for example, bioimaging, fluorescence sensing, and drug delivery, etc. Recently, it was found that, under light excitation, CDs can also be exploited as a novel photosensitizer to prepare reactive oxygen species (ROS), which expand their applications in the field of photodynamic therapy for cancer treatment. Nevertheless, the high cost and complex fabrication approach of CDs significantly limit their applications. To address this issue, bottom-up routes usually utilize sustainable and inexpensive carbon precursor as starting materials, employed N,N-dimethylformamide (DMF) or ethanol as an environmental-friendly solvent. Bottom-up approach was energy efficient, and the purification process was relatively simple by dialysis. Therefore, carbon dots (CDs) were facilely fabricated in a one-pot solvothermal process using 1-aminoanthraquinone as a precursor, and their application as photosensitizers for in vitro antitumor cells, especially photodynamic therapy (PDT) was established. Then the photophysical and nanoscale dimensions properties of the fabricated CDs were characterized via TEM, UV-visible, fluorescence, and FT-IR spectroscopy. The synthesized N-doped CDs can easily dissolve in water, possess very low biotoxicity, yellow-light emission (maximum peak at 587 nm). More importantly, PDT studies demonstrated that the obtained CDs possess a high singlet oxygen yield of 35%, and exhibit significant phototoxicity to cancer cells upon 635 nm laser irradiation. These studies highlight that N-doped CDs can be facilely synthesized from only one precursor, and are a potentially novel theranostic agent for in vivo PDT.

Evaluation of the Genotoxicity of Almond Hull: Implications for Its Use as a Novel Food Ingredient.

Almond hull, a substantial byproduct comprising more than half of almond fresh weight, has recently gained attention due to its functionality and sustainability benefits. Despite heightened interest, information regarding its toxicity remains limited. In order to assess its genotoxic potential, we conducted Good Laboratory Practice-compliant in vitro and in vivo studies following Organization for Economic Co-operation and Development (OECD) guidelines. No evidence of toxicity or mutagenicity was observed in a bacterial reverse mutation assay using five tester strains, evaluating almond hull at concentrations up to 5 mg/plate, with or without metabolic activation. Almond hull did not induce chromosome structural damage in a chromosome aberration assay using Chinese hamster ovary cells, nor did it cause any spermatogonial chromosomal aberration in tested male BALB/c mice. To evaluate its ability to induce DNA damage in rodents, a combined micronucleus assay was conducted in KM mice of both sexes. Almond hull was administered at doses of 1250, 2500, and 5000 mg/kg/day via gavage once daily for 2 days. No adverse effects of almond hull were observed in the micronucleus assay. Our results indicate no evidence of the genotoxic potential of almond hull administered up to the maximum concentrations of 5 g/kg, as recommended by OECD guidelines.

The mitigation potential of synergistic quorum quenching and antibacterial properties for biofilm proliferation and membrane biofouling.

Biofouling has been a persistent problem hindering the application of membranes in water treatment, and quorum quenching has been identified as an effective method for mitigating biofouling, but surface accumulation of live bacteria still induces biofilm secretion, which poses a significant challenge for sustained prevention of membrane biofouling. In this study, we utilized quercetin, a typical flavonoid with the dual functions of quorum quenching and bacterial inactivation, to evaluate its role in preventing biofilm proliferation and against biofouling. Quercetin exhibited excellent antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and the decreased bioactivity was positively correlated with the quercetin concentration, with inhibition rates of 53.1 % and 57.4 %, respectively, at the experimental concentrations. The RT-qPCR results demonstrated that quercetin inhibited AI-2 of E. coli and AGR of S. aureus mediated quorum sensing system, and reduced the expression of genes such as adhesion, virulence, biofilm secretion, and key regulatory proteases. As a result, the bacterial growth cycle was retarded and the biomass and biofilm maturation cycles were alleviated with the synergistic effect of quorum quenching and antibacterial activity. In addition, membrane biofouling was significantly declined in the dynamic operation experiments, dead cells in the biofilm overwhelmingly dominated, and the final normalized water fluxes were increased by more than 49.9 % and 34.5 % for E. coli and S. aureus, respectively. This work demonstrates the potential for mitigating biofouling using protocols that quorum quenching and inactivate bacteria, also provides a unique and long-lasting strategy to alleviate membrane fouling.

Ion Resource Recovery via Electrodialysis Fabricated with Poly(Arylene Ether Sulfone)-Based Anion Exchange Membrane in Organic Solvent System.

Ion resource recovery from organic wastewater is beneficial for achieving emission peaks and carbon neutrality targets. Advanced organic solvent-resistant anion exchange membranes (AEMs) for treating organic wastewater via electrodialysis (ED) are of significant interest. Herein, a kind of 3D network AEM based on poly(arylene ether sulfone) cross-linked with a flexible cross-linker (DBH) for ion resource recovery via ED in organic solvent system is reported. Investigations demonstrate that the as-prepared AEMs show excellent dimensional stability in 60% DMSO (aq.), 60% ethanol (aq.), and 60% acetone (aq.), respectively. For example, the optimized AEM shows very low swelling ratios of 1.04-1.10% in the organic solvents. ED desalination ratio can reach 99.1% after exposure of the AEM to organic solvents for 30 days, and remain > 99% in a mixture solution containing organic solvents and 0.5 m NaCl. Additionally, at a current density of 2.5 mA cm-2, the optimized AEM soaked in organic solvents for 30 days shows a high perm-selectivity (Cl-/SO4 2-) of 133.09 (vs 13.11, Neosepta ACS). The superior ED performance is attributed to the stable continuous sub-nanochannels within AEM confirmed by SAXS, rotational energy barriers, etc. This work shows the potential application of cross-linked AEMs for resource recovery in organic wastewater.

Acute Oral Toxicity Evaluation of Almond Hull Powders in BALB/c Mice.

Almond hull, a substantial byproduct constituting more than half of almond fresh weight, has garnered recent attention due to its abundance in fiber and bioactive content. Despite this huge interest, data on its toxicity remain scarce. In line with the Organization for Economic Cooperation and Development (OECD) 423 guidelines, this study conducted an acute oral toxicity test using almond hull powders processed from three major almond varieties of Butte, Monterey, and Nonpareil on BALB/c female mice, administering dosages of 300 mg/kg body weight (bw), 2000 mg/kg bw, and 5000 mg/kg bw, with observations over a 14-day period. The results indicated that almond hull powders were non-toxic, aligning with the Globally Harmonized System's classification. Administering up to 5000 mg/kg bw of all three varieties of almond hull powders (female BALB/c mice) and 10,000 mg/kg bw of Monterey almond hull powders (both female and male mice) induced no adverse effects in terms of mortality, body weight changes, food intake, organ to weight ratio, and clinical biochemistry. Additionally, histopathological examination revealed no organ abnormalities. This study demonstrates the non-toxic nature of almond hull as an edible food ingredient under experimental conditions, encouraging the further exploration of its potential for safe consumption and its health benefits.

Rechargeable Multifunctional Anti-Bacterial AEMs for Electrodialysis: Improving Anti-Biological Performance via Synergistic Antibacterial Mechanism.

Constructing a functional layer on the surface of commercial membrane (as a substrate) to inhibit the formation of biofilms is an efficient strategy to prepare an antibacterial anion exchange membrane (AEM). Herein, a rechargeable multifunctional anti-biological system is reported by utilizing the mussel-inspired L-dopa connection function on commercial AEMs. Cobalt nanoparticles (Co NPs) and N-chloramine compounds are deposited on the AEM surface by a two-step modification procedure. The anti-biofouling abilities of the membranes are qualitatively and quantitatively analyzed by adopting common Gram-negative (E. coli) and Gram-positive (S. aureus & Bacillus) bacteria as model biofouling organisms. The optimized membrane exhibits a high stability concerning the NaCl solution separation performance within 240 min. Meantime, the mechanism of the anti-adhesion is un-veiled at an atomic level and molecular dynamics (MD) simulation are conducted to measure the interaction, adsorption energy and average loading by using lipopolysaccharide (LPS) of E. coli. In view of the superior performance of antibacterial surfaces, it is believed that this work could provide a valuable guideline for the design of membrane materials with resistance to biological contamination.

Long-Term Atmosphere Surveillance (2016-2021) of PM2.5-bound Polycyclic Aromatic Hydrocarbons and Health Risk Assessment in Yangtze River Delta, China.

Long-term atmospheric quality monitoring of fine particulate matter (PM2.5) and PM2.5-bound polycyclic aromatic hydrocarbons (PAHs) was performed in Wuxi from 2016 to 2021. In total, 504 atmospheric PM2.5 samples were collected, and PM2.5-bound 16 PAHs were detected. The PM2.5 and ∑PAHs level decreased annually from 2016 to 2021, from 64.3 to 34.0 µg/m3 and 5.27 to 4.22 ng/m3, respectively. The benzo[a]pyrene (BaP) levels of 42% of the monitoring days in 2017 exceeded the recommended European Union (EU) health-based standard of 1 ng/m3. Five- and six-ring PAHs were found, including benz[a]anthracene, benzo[k]fluoranthene (Bkf), BaP, and benzo[g,h,i]perylene, which were the dominant components (indicating a prominent petroleum, biomass, and coal combustion contribution) using molecular diagnostic ratios and positive matrix factorization analysis. Moreover, PM2.5 and PAHs were significantly negatively associated with local precipitation over a period of six years. Statistically significant temporal and spatial distribution differences of PM2.5, and ∑PAHs were also found. The toxicity equivalent quotient (TEQ) of total PAHs was 0.70, and the TEQ of BaP (0.178) was the highest, followed by that of Bkf (0.090), dibenz[a,h]anthracene (Dah) (0.048), and indeno[1,2,3-cd]pyrene (0.034). The medians of the incremental lifetime cancer risk for long-term exposure to PAHs were 2.74E-8, 1.98E-8, and 1.71E-7 for children, teenagers, and adults, respectively, indicating that the carcinogenic risk of PAHs pollution in air was acceptable to local residents in this area. Sensitivity analysis revealed that BaP, Bkf, and Dah significantly contributed to carcinogenic toxicity. This research provides comprehensive statistics on the local air persistent organic pollutants profile, helps to identify the principal pollution source and compounds, and contributes to the prevention of regional air pollution. Supplementary Information: The online version contains supplementary material available at 10.1007/s12403-023-00572-x.

Quantification of the three-dimensional root system architecture using an automated rotating imaging system.

BACKGROUND: Crop breeding based on root system architecture (RSA) optimization is an essential factor for improving crop production in developing countries. Identification, evaluation, and selection of root traits of soil-grown crops require innovations that enable high-throughput and accurate quantification of three-dimensional (3D) RSA of crops over developmental time. RESULTS: We proposed an automated imaging system and 3D imaging data processing pipeline to quantify the 3D RSA of soil-grown individual plants across seedlings to the mature stage. A multi-view automated imaging system composed of a rotary table and an imaging arm with 12 cameras mounted with a combination of fan-shaped and vertical distribution was developed to obtain 3D image data of roots grown on a customized root support mesh. A 3D imaging data processing pipeline was developed to quantify the 3D RSA based on the point cloud generated from multi-view images. The global architecture of root systems can be quantified automatically. Detailed analysis of the reconstructed 3D root model also allowed us to investigate the Spatio-temporal distribution of roots. A method combining horizontal slicing and iterative erosion and dilation was developed to automatically segment different root types, and identify local root traits (e.g., length, diameter of the main root, and length, diameter, initial angle, and the number of nodal roots or lateral roots). One maize (Zea mays L.) cultivar and two rapeseed (Brassica napus L.) cultivars at different growth stages were selected to test the performance of the automated imaging system and 3D imaging data processing pipeline. CONCLUSIONS: The results demonstrated the capabilities of the proposed imaging and analytical system for high-throughput phenotyping of root traits for both monocotyledons and dicotyledons across growth stages. The proposed system offers a potential tool to further explore the 3D RSA for improving root traits and agronomic qualities of crops.

Effects of fruits and vegetables on gut microbiota in a mouse model of metabolic syndrome induced by high-fat diet.

The aim of this study was to evaluate the effect of fruit and vegetable intake on gut microbiota using a mouse model of metabolic syndrome (MS) induced by a high-fat diet. Forty-eight male mice were randomly divided into four groups, control group (C), high-fat diet-fed model group (H), high fat plus low intake of fruits and vegetables diet-fed group (H.LFV), high fat plus high intake of fruits and vegetables diet-fed group (H.HFV), and each group were fed for 60 days. During the experiment, mouse body weights were recorded and fecal samples were collected. Cetyltrimethyl ammonium bromide (CTAB) method was used to extract fecal bacterial DNA, and the purity and concentration of the DNA were detected by electrophoresis. DNA samples underwent PCR amplification (primers in 16 S V4 (515F and 806R)). Raw sequencing data were processed, and sample complexity and multiple-sample comparisons were investigated. Mouse organ coefficient, serum lipid levels, fecal TC (total cholesterol) and TBA (total bile acid) levels, and hepatic glutathione and malondialdehyde levels were determined. Compared to the H group, the fecal TC and TBA levels decreased significantly in the H.HFV group (p < .05), and hepatic glutathione and malondialdehyde levels decreased significantly in both H.LFV and H.HFV groups (p < .05). Decreased abundance of Firmicutes, Burkholderiales, Syntrophomonas, and Pseudomonadales in gut microbiota was observed in H.LFV and H.HFV groups compared to the H group. The Anosim results showed significant differences in pairwise comparison between groups. The linear discriminant analysis effect size (LEfSe) results showed that k_bacteria not only exhibited statistically differences between H and C groups but also among H.LFV, H.LFV, and H groups, and hence, could be used as a biomarker between groups. To sum up, fruit and vegetable powder could increase the fecal excretion of TC and TBA, and the antioxidant capacity in C57BL/6N mice. Meanwhile, the mechanism that fruit and vegetable powder could prevent MS in C57BL/6N mice was related to the decreased abundance of gut microbiota, including Firmicutes, Syntrophomonadales, and Pseudomonadales. Hence, fruit and vegetable powder could be used as a recommended food to regulate gut microbiota and prevent the occurrence of MS-related diseases.

Subnanometer Ion Channel Anion Exchange Membranes Having a Rigid Benzimidazole Structure for Selective Anion Separation.

Ion-conductive polymers having a well-defined phase-separated structure show the potential application of separating mono- and bivalent ion separation. In this work, three side-chain-type poly(arylene ether sulfone)-based anion exchange membranes (AEMs) have been fabricated to investigate the effect of the stiffness of the polymer backbone within AEMs on the Cl-/NO3- and Cl-/SO42- separation performance. Our investigations via small-angle X-ray scattering (SAXS), positron annihilation, and differential scanning calorimetry (DSC) demonstrate that the as-prepared AEM with a rigid benzimidazole structure in the backbone bears subnanometer ion channels resulting from the arrangement of the rigid polymer backbone. In particular, SAXS results demonstrate that the rigid benzimidazole-containing AEM in the wet state has an ion cluster size of 0.548 nm, which is smaller than that of an AEM with alkyl segments in the backbone (0.760 nm). Thus, in the electrodialysis (ED) process, the former exhibits a superior capacity of separating Cl-/SO42- ions relative to latter. Nevertheless, the benzimidazole-containing AEM shows an inability to separate the Cl-/NO3- ions, which is possibly due to the similar ion size of the two. The higher rotational energy barrier (4.3 × 10-3 Hartree) of benzimidazole units and the smaller polymer matrix free-volume (0.636%) in the AEM significantly contribute to the construction of smaller ion channels. As a result, it is believed that the rigid benzimidazole structure of this kind is a benefit to the construction of stable subnanometer ion channels in the AEM that can selectively separate ions with different sizes.

Simple and fast determination of perfluorinated compounds in Taihu Lake by SPE-UHPLC-MS/MS.

A simple and fast analytical method for determination of eleven Polyfluorinated Compounds (PFCs) in source water was developed in the present work. The water sample was prepared without filtered through microfiltration membrane and 500mL of source water was enriched by the solid phase extraction (SPE). The targent compounds were analyzed by ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The optimized analytical method was validated in terms of recovery, precision and method detection limits (MDLs). The recovery values after correction with the corresponding labeled standard were between 97.3 and 113.0% for samples spiked at 5ng/L, 10ng/L and 20ng/L. All PFCs showed good linearity and the linear correlation coefficient was over 0.99. The precisions were 1.0-9.0% (n=6). As the result of the enrichment, the MDL values ranged from 0.03 to 1.9ng/L and were enough for analysis of the trace levels of PFCs in the Taihu Lake. The method was further validated in determining the source water and the results showed that PFHxS, PFHxA, PFOA and PFOS were the primary PFCs in Taihu Lake which might be different from the other researches. The method can be used for determination of PFCs in water with a stable recovery, good reproducibility, low detection limit, less solvent consumption, time saving and labor saving. To our knowledge, this is the first method that describes the effect of the filter membrane on the determination of PFCs in water which might acquire more accurate concentration of PFCs in Taihu Lake.

On-off Bodipy chemosensor for recognition of iron(III) ion based on the inner filter effect and its applications in cellular and bacterial imaging.

One strong fluorescent Bodipy-containing derivative was synthesized and characterized using 1 H NMR, electrospray ionization mass spectrometry and elemental analysis. Its electrochemical and photophysical properties were investigated. In addition, the Bodipy derivative could be used as an on-off fluorescent probe for the detection of Fe3+ ions based on the inner filter effect because the absorption band of the Fe3+ ion overlaps the excitation band of Bodipy very well upon irradiation with UV light. Furthermore, the Bodipy-based sensor has obvious advantages including simplicity, rapid response, high selectivity, sensitivity and a detection limit of 1.2 µmol/L, and has been demonstrated in real water samples including tap water, mineral water and water from Lake Tai. Moreover, the fluorescent probe could also be used as a probe for the determination of Fe3+ in cellular and bacterial imaging. Copyright © 2016 John Wiley & Sons, Ltd.