Polarization Z-Scan Studies Revealing Plasmon Coupling Enhancement Due to Dimer Formation of Gold Nanoparticles in Nematic Liquid Crystals.

We investigate the plasmon coupling of gold nanoparticle (AuNP) dimers dispersed in a nematic liquid crystal matrix using the polarization z-scan technique. Our experimental setup includes the precise control of incident light polarization through polarization angles of 0°, 45°, and 90°. Two distinct cell orientations are examined: parallel and twisted nematic cells. In parallel-oriented cells, where liquid crystal molecules and AuNPs align with the rubbing direction, we observe a remarkable 2-3-fold increase in the nonlinear absorption coefficient when the polarization of the incident light is parallel to the rubbing direction. Additionally, a linear decrease in the third-order nonlinear absorption coefficient is noted as the polarization angle varies from 0° to 90°. In the case of twisted nematic cells, the NPs do not have any preferred orientation, and the enhancement remains consistent across all polarization angles. These findings conclusively establish that the observed enhancement in the nonlinear absorption coefficient is a direct consequence of plasmon coupling, shedding light on the intricate interplay between plasmonic nanostructures and liquid crystal matrices.

Plasmon enhancement of third-order nonlinear optical absorption of gold nanoparticles dispersed in planar oriented nematic liquid crystals.

We report structural and nonlinear optical properties of 20 nm gold (Au) nanoparticles (NPs) that are dispersed in planar degenerate (non-oriented) and planar oriented nematic liquid crystals (LCs) (4'-Pentyl-4-biphenylcarbonitrile-5CB). Taking advantage of elastic forces in the planar oriented nematic LC, we aligned AuNPs parallel to the 5CB director axis. In the case of planar degenerate, 5CB is not aligned and has no preferred orientation, forcing the AuNPs to disperse randomly. Results show that the linear optical absorption coefficient for the planar oriented 5CB/AuNPs mixture is larger than the corresponding planar degenerate sample. The nonlinear absorption coefficients are greatly enhanced in planar oriented samples at relatively high concentrations which can be attributed to plasmon coupling between the aligned AuNPs. This study demonstrates the utility of LCs for developing the assembly of NPs with enhanced optical properties which may offer important insight and technological advancement for novel applications, including photonic nanomaterials and optoelectronic devices.

Digital holographic microscopy for longitudinal volumetric imaging of growth and treatment response in three-dimensional tumor models.

We report the use of digital holographic microscopy (DHM) as a viable microscopy approach for quantitative, nondestructive longitudinal imaging of in vitro three-dimensional (3-D) tumor models. Following established methods, we prepared 3-D cultures of pancreatic cancer cells in overlay geometry on extracellular matrix beds and obtained digital holograms at multiple time points throughout the duration of growth. The holograms were digitally processed and the unwrapped phase images were obtained to quantify the nodule thickness over time under normal growth and in cultures subject to chemotherapy treatment. In this manner, total nodule volumes are rapidly estimated and demonstrated here to show contrasting time-dependent changes during growth and in response to treatment. This work suggests the utility of DHM to quantify changes in 3-D structure over time and suggests the further development of this approach for time-lapse monitoring of 3-D morphological changes during growth and in response to treatment that would otherwise be impractical to visualize.

Parallel-quadrature phase-shifting digital holographic microscopy using polarization beam splitter.

We present a digital holography microscopy technique based on parallel-quadrature phase-shifting method. Two π/2 phase-shifted holograms are recorded simultaneously using polarization phase-shifting principle, slightly off-axis recording geometry, and two identical CCD sensors. The parallel phase-shifting is realized by combining circularly polarized object beam with a 45° degree polarized reference beam through a polarizing beam splitter. DC term is eliminated by subtracting the two holograms from each other and the object information is reconstructed after selecting the frequency spectrum of the real image. Both amplitude and phase object reconstruction results are presented. Simultaneous recording eliminates phase errors caused by mechanical vibrations and air turbulences. The slightly off-axis recording geometry with phase-shifting allows a much larger dimension of the spatial filter for reconstruction of the object information. This leads to better reconstruction capability than traditional off-axis holography.

Quantitative phase microscopy using dual-plane in-line digital holography.

We present detailed theoretical evaluation and thorough experimental investigation of quantitative phase imaging using our previously demonstrated dual-plane in-line digital holographic microscopy technique [Opt. Lett. 35, 3426 (2010)]. This evaluation is based on the recording of two interferograms at slightly different planes and numerically reconstructing the object information. The zero-order diffracted wave is eliminated by using the method of subtraction of average intensity of the entire hologram, and the twin-image diffracted wave is removed by Fourier domain processing of the two recorded holograms. Experiments are performed using controlled amplitude and phase objects and human muscle cells to demonstrate the potential of this technique.

Dual-channel in-line digital holographic double random phase encryption.

We present a robust encryption method for the encoding of 2D/3D objects using digital holography and virtual optics. Using our recently developed dual-plane in-line digital holography technique, two in-line digital holograms are recorded at two different planes and are encrypted using two different double random phase encryption configurations, independently. The process of using two mutually exclusive encryption channels makes the system more robust against attacks since both the channels should be decrypted accurately in order to get a recognizable reconstruction. Results show that the reconstructed object is unrecognizable even when the portion of the correct phase keys used during decryption is close to 75%. The system is verified against blind decryptions by evaluating the SNR and MSE. Validation of the proposed method and sensitivities of the associated parameters are quantitatively analyzed and illustrated.

Dual plane in-line digital holographic microscopy.

We report a dual plane in-line digital holographic microscopy technique that exploits the method of subtraction of average intensity of the entire hologram to suppress the zero-order diffracted wave. Two interferograms are recorded at different planes to eliminate the conjugate image. The experimental results demonstrate successful reconstruction of phase objects as well as of amplitude objects. The two interferograms can be recorded simultaneously, using two CCD or CMOS sensors, in order to increase the acquisition rate. This enhanced acquisition rate, together with the improved reconstruction capability of the proposed method, may find applications in biomedical research for visualization of rapid dynamic processes at the cellular level.

Nonlinear photoacoustics for measuring the nonlinear optical absorption coefficient.

We report a novel photoacoustic Z-scan (PAZ-scan) technique that combines the advantages offered by the conventional Z-scan method and the sensitivity of the photoacoustic detection. The sample is scanned through the focused laser beam and the generated photoacoustic signal is recorded using a 10 MHz focused ultrasound transducer. Since the signal strength is directly proportional to the optical absorption, PAZ-scan displays nonlinear behavior depicting the nonlinear optical absorption of the material. Among many advantages, our experiments on mouse blood show that PAZ-scan can potentially be used as a standard technique to calibrate contrast agents used in theranostics in general and photoacoustics in particular.

Common-path multimodal optical microscopy.

We have developed a common-path multimodal optical microscopy system that is capable of using a single optical source and a single camera to image amplitude, phase, and fluorescence features of a biological specimen. This is achieved by varying either contrast enhancement filters at the Fourier plane and/or neutral density/fluorescence filters in front of the CCD camera. The feasibility of the technique is demonstrated by obtaining brightfield, fluorescence, phase-contrast, spatially filtered, brightfield+fluorescence, phase+fluorescence, and edge-enhanced+fluorescence images of the same Drosophila embryo without the need for image registration and fusion. This comprehensive microscope has the capability of providing both structural and functional information and may be used for applications such as studying live-cell dynamics and in high throughput microscopy and automated microscopy.

Coherent population oscillations and superluminal light in a protein complex.

We observed superluminal light in aqueous solution of the protein complex bacteriorhodopsin (bR) at 647.1 nm wavelength where it exhibits reverse saturable behavior, exploiting the technique of coherent population oscillations (CPO). With a modulation frequency of 10 Hz, the signal pulse through a 1 cm path cell is ahead by 3 msec relative to the reference pulse, corresponding to a group velocity of -3.3 m/sec. Following our early work on slow light in the same sample at the saturable wavelength 568.2 nm, we now explicitly observed the narrow spectral hole in the absorption band of the stable B state and further, demonstrated a close correlation between the profile of the hole and the corresponding pulse delay for various modulation frequencies. A similar behavior is observed for superluminal light versus antihole blown in the absorption band.

Optical Fourier techniques for medical image processing and phase contrast imaging.

This paper briefly reviews the basics of optical Fourier techniques (OFT) and applications for medical image processing as well as phase contrast imaging of live biological specimens. Enhancement of microcalcifications in a mammogram for early diagnosis of breast cancer is the main focus. Various spatial filtering techniques such as conventional 4f filtering using a spatial mask, photoinduced polarization rotation in photosensitive materials, Fourier holography, and nonlinear transmission characteristics of optical materials are discussed for processing mammograms. We also reviewed how the intensity dependent refractive index can be exploited as a phase filter for phase contrast imaging with a coherent source. This novel approach represents a significant advance in phase contrast microscopy.

Slow light in bacteriorhodopsin solution using coherent population oscillations.

Slow light is demonstrated in liquid phase in an aqueous bacteriorhodopsin (bR) solution at room temperature. Group velocity as low as 3 m/s (all the way to c) is achieved by exploiting the photoisomerization property of bR for coherent population oscillations. Slow light in the liquid phase offers several advantages over solids or vapors for a variety of applications: (i) shorter lifetimes of the M state facilitate slow light at higher modulation frequencies, (ii) convection makes it possible to obtain large signal delays even at high input powers, and (iii) solution concentration is another convenient parameter to vary the signal delay over a wide range.

Nonlinear optical Fourier filtering technique for medical image processing.

Real-time nonlinear optical Fourier filtering for medical image processing is demonstrated, exploiting light modulating characteristics of thin films of the biophotonic material bacteriorhodopsin (bR). The nonlinear transmission of bR films for a 442 nm probe beam with a 568 nm control beam and vice versa is experimentally studied in detail. The spatial frequency information carried by the blue probe beam is selectively manipulated in the bR film by changing the position and intensity of the yellow control beam. The feasibility of the technique is first established with different shapes and sizes of phantom objects. The technique is applied to filter out low spatial frequencies corresponding to soft dense breast tissue and displaying only high spatial frequencies corresponding to microcalcifications in clinical screen film mammograms. With the aid of an electrically addressed spatial light modulator (SLM), we successfully adapt the technique for processing digital phantoms and digital mammograms. Unlike conventional optical spatial filtering techniques that use masks, the technique proposed can easily accommodate the changes in size and shape of details in a mammogram.

Spectral phase based medical image processing.

RATIONALE AND OBJECTIVES: To exploit the spectral phase characteristics of digital or digitized mammograms for early detection of microcalcifications, shape, and sizes of suspected lesions and to demonstrate its use for training radiologists to discriminate signal features in different spatially varying backgrounds. MATERIALS AND METHODS: We propose two algorithms: in the phase-only image (POI) reconstruction algorithm the spectral phase of the digital mammogram is extracted from its Fourier spectrum. This is coupled with unit magnitude and inverse Fourier transformed to reconstruct the POI thus enhancing the features of interest such as microcalcifications, shape, and sizes of suspected lesions. In the algorithm for image reconstruction from a priori phase-only information, spectral phase is used to extract signal features of the digital mammogram and then this is combined with spectral magnitude that is extracted and averaged over an ensemble of unrelated digital mammograms. RESULTS: The results for several digital phantoms and mammograms show that POI reconstructs only high spatial frequencies related to the features such as microcalcifications, shape, and size of masses like cysts and tumors. The results on image reconstruction from a priori phase-only information demonstrate the changes in the visibility of signal features when buried in a wide variety of real world mammogram backgrounds with different densities. CONCLUSION: The POI can aid radiologists in early detection of microcalcifications, lesions, and other masses of interest in digital mammograms. This reconstruction method is self-adaptive to changes in the background. The image reconstruction from a priori phase-only information can help the radiologist as a training tool in his decision-making process. Preliminary experiments indicate the potential of the techniques for early diagnosis of breast cancer. Clinical studies on these algorithm procedures are in progress for application as a diagnostic CAD tool in digital mammography. These methods can in general be applied to other medical images such as CT and MRI images.